Text preview for : 04-rh12-servtool.pdf part of NOKIA 6230_6230i Servicemanual and Video
Back to : 6230 - 6230i_SM.zip.part0 | Home
CCS Technical Documentation RH-12/RH-28 Series Transceivers
4 - Service tools
Issue 1 02/04
Nokia Corporation
RH-12/RH-28 Service Tools
CCS Technical Documentation
[This page left intentionally blank]
Page 2
Nokia Corporation
Issue 1 02/04
CCS Technical Documentation Table of Contents
RH-12/RH-28 Service Tools
Page No List of service tools ........................................................................................................ 5 JBV-1 Docking station................................................................................................... 6 DA-8 Docking station adaptor ....................................................................................... 7 SA-17 RF adaptor .......................................................................................................... 8 MJ-12 Module repair jig ................................................................................................ 9 RJ-9 Soldering Jig........................................................................................................ 11 SES-3 Rework Stencil.................................................................................................. 12 FPS-8 Flash Prommer (Sales Pack) ............................................................................. 13 FPS-8C Parallel Flash Prommer (Sales Pack) ............................................................. 14 ACF-8 Universal Power Supply .................................................................................. 15 SF-7 POS flash adaptor................................................................................................ 16 XCS-1 Service Cable ................................................................................................... 17 FLS-4S POS (Point Of Sale) Flash Device (Sales Pack)............................................. 18 PCS-1 Power Cable...................................................................................................... 19 XRF-1 RF Cable .......................................................................................................... 20 DAU-9S MBUS Cable................................................................................................. 21 SCB-3 DC Cable .......................................................................................................... 22 XCS-4 Modular Cable ................................................................................................. 23 Printer Cable ................................................................................................................ 24
Issue 1 02/04
Nokia Corporation
Page 3
RH-12/RH-28 Service Tools
CCS Technical Documentation
[This page left intentionally blank]
Page 4
Nokia Corporation
Issue 1 02/04
CCS Technical Documentation
RH-12/RH-28 Service Tools
List of service tools
The table below shows the set of tools that can be used for testing, error-analysis and repair of the RH-12/RH-28 product.
Type Designator DA-8
Description Docking station adaptor DA-8 Test pins
Part Code 0770546 0770617 0770298 0770584 0730012 0730114 0730218 0730178 0770544 0080541 0080542 0080542 0080321 0730029 0080396 0730085 0730108 0770547 0770417 0770558 0770381 0770545 0770450
JBV-1 SA-17 PCS-1 SCB-3 XCS-1 XCS-4 MJ-12 FLS-4S
Docking station RF adaptor DC power cable DC cable Service cable Modular cable Module repair jig POS flash adaptor dongle for EMEA POS flash adaptor dongle for APAC POS flash adaptor dongle for AMERICAS Parallel flash prommer (Inc. AXS-4, AXS-8, ACF-8, printer cable) Printer cable (incl. In FPS-8 sales pack)
FPS-8
FPS-8C XRF-1 DAU-9S RJ-9 MJS-76 SES-3 SPS-1 SF-7
Flash prommer box RF cable MBUS cable Soldering jig Rework jig Rework stencil Soldering Paste Spreader POS flash adaptor SF-7 Test pins
Issue 1 02/04
Nokia Corporation
Page 5
RH-12/RH-28 Service Tools
CCS Technical Documentation
JBV-1 Docking station
The JBV-1 docking station is a general tool that has been designed for calibration and software update use. The DA-8 docking station adaptor is a product-specific tool that provides signal connections to the phone. The JBV-1 and the DA-8 are used as one unit. The JVB-1 main electrical functions include the following: · · · · · · Adjustable VBATT calibration voltage, current measurement limit voltage: VCHAR, current measurement: ICHAR Adjustable ADC calibration voltage via BTEM and the BSI signal BTEMP and BSI calibration resistor Signal from FBUS to the phone via the parallel jig Control via FBUS or USB Flash OK/FAIL indication
In the calibration mode the JBV-1 is powered by an external power supply: 11-16V DC. When flashing, the power for the phone can be taken from the FPS-8 or an external power supply: 11-16 V DC.
Page 6
Nokia Corporation
Issue 1 02/04
CCS Technical Documentation
RH-12/RH-28 Service Tools
DA-8 Docking station adaptor
The docking station adaptor is used for the RH-12/RH-28 in combination with the JBV-1. The DA-8 supports flashing and energy management calibration. If used in conjunction with the SA-17, a RF Go/NoGo test can be performed. The MMC card is to be removed before mounting the phone on the docking station adaptor. Features included: · · · · · Compatible with the JBV-1 Easy phone attachment and detachment Reliable phone locking (via DC-jack) Switch for detection of phone attachment Replaceable pogo pins
Product Code
DA-8 Docking station adaptor: 0770546
View of DA-8 when mounted on the JBV-1
Issue 1 02/04
Nokia Corporation
Page 7
RH-12/RH-28 Service Tools
CCS Technical Documentation
SA-17 RF adaptor
The SA-17 RF adaptor provides a galvanic connection to the RF output. The adaptor is intended for a Go/NoGo test. By removing the A&B covers and the antenna, the RF adaptor can be attached on the top section of the phone. The adaptor is designed to be used with the DA-8 docking station adaptor or the SF-7 POS flash adaptor.
Product code
SA-17 RF adaptor: 0770584
View of SA-17
Page 8
Nokia Corporation
Issue 1 02/04
CCS Technical Documentation
RH-12/RH-28 Service Tools
MJ-12 Module repair jig
The MJ-12 Module repair jig is designed for Regional service centers to allow component level trouble shooting and testing.
Product code
MJ-12 Module Repair Jig: 0770544"
General features
· · · · · · · · · EDS proof design Component level access while inserted in the jig Access to system connector SIM cards reader UI board with key mat integrated in the jig Access to phone module POWER-On push button Access to phone module side keys (volume keys) Support for IrDa testing BT coupler for Go/NoGo test
Power supply features
· · · · · · · Jig and phone supply via 5mm DC jack 2A replaceable fuse Voltage regulator Direct power feeding (bypassing regulator with a jumper) Reverse voltage protection Over-voltage protection On-indicator (green LED)
Spare parts
· · Pogo pins used for RF connector (0770446) Pogo pins used for flash I/F (needs soldering) (0770551)
Issue 1 02/04
Nokia Corporation
Page 9
RH-12/RH-28 Service Tools ·
CCS Technical Documentation Pogo pins used for SIM connection (needs soldering) (0770442)
View of MJ-12
Note: The supply voltage for the MJ-12 has to be kept within the range of 8-12 V when using the built in regulator. When bypassing the regulator (IMEI rewrite), the voltage must be kept below 5,4V .
Page 10
Nokia Corporation
Issue 1 02/04
CCS Technical Documentation
RH-12/RH-28 Service Tools
RJ-9 Soldering Jig
The RJ-9 soldering jig is used for soldering and reworking for the ez4a Main board.
Product Code
RJ-9 soldering jig: 0770547
View of RJ-9
Issue 1 02/04
Nokia Corporation
Page 11
RH-12/RH-28 Service Tools
CCS Technical Documentation
SES-3 Rework Stencil
The SES-3 Rework Stencil is used for PA Chip N700 (LGA type component) rework. It is used together with the Rework Jig soldering paste spreader.
Product code
SES-3 Rework Stencil: 077031
The tools needed for rework include: · · · MJS-76 Rework Jig: 0770417 SES-3 Stencil: 0770558 SPS-1 Soldering Paste Spreader: 0770381
Page 12
Nokia Corporation
Issue 1 02/04
CCS Technical Documentation
RH-12/RH-28 Service Tools
FPS-8 Flash Prommer (Sales Pack)
The Flash Prommer FPS-8 is used with e.g. DA-8 and JVB-1. Power is supplied to FPS-8 from the Universal Power Supply. The sales pack includes: · · · · · FPS-8 Flash Prommer: 0750123 FPS-8 Activation Sheet: 9359289 Universal Power Supply: 0680032 AXS-4 Service Cable (D9-D9): 0730090 Printer cable: 0730029
Sales package code
FPS-8 Flash Prommer: 0080321
View of FPS-8
Issue 1 02/04
Nokia Corporation
Page 13
RH-12/RH-28 Service Tools
CCS Technical Documentation
FPS-8C Parallel Flash Prommer (Sales Pack)
The Parallel Flash Prommer FPS-8C is used with DA-8 and JVB-1. Flash programming can be done to maximum of 8 phones parallel. FPS-8C consists of eight SF11C programming cards. The SF11C card is functionally identical to FPS-8.
Sales package code
FPS-8C Parallel Flash Prommer: 0080396
View of FPS-8C
Page 14
Nokia Corporation
Issue 1 02/04
CCS Technical Documentation
RH-12/RH-28 Service Tools
ACF-8 Universal Power Supply
The ACF-8 Universal Power Supply is used to power FPS-8. ACF-8 has 6 V DC and 2.1 A output.
Product Code
ACF-8 Universal Power Supply: 0680032
View of ACF-8
CF-8
Issue 1 02/04
Nokia Corporation
Page 15
RH-12/RH-28 Service Tools
CCS Technical Documentation
SF-7 POS flash adaptor
The SF-7 is a POS flash adaptor provided for the RH-12/RH-28 phones.
Product Code
SF-7 POS flash adaptor: 0770545
View of SF-7
Page 16
Nokia Corporation
Issue 1 02/04
CCS Technical Documentation
RH-12/RH-28 Service Tools
XCS-1 Service Cable
The XCS-1 Service Cable is used to connect FLS-4 to FLA-27.
Product code
XCS-1 Service Cable: 0730218
View of XCS-1
Issue 1 02/04
Nokia Corporation
Page 17
RH-12/RH-28 Service Tools
CCS Technical Documentation
FLS-4S POS (Point Of Sale) Flash Device (Sales Pack)
FLS-4S is a dongle and flash device incorporated into one package, developed specifically for POS use.
Product Code
Sales Pack (Europe/Africa): 0080541 Sales Pack (APAC): 0080542 Sales Pack: (US): 080543
View of FLS-4S
Page 18
Nokia Corporation
Issue 1 02/04
CCS Technical Documentation
RH-12/RH-28 Service Tools
PCS-1 Power Cable
The PCS-1 Power Cable (DC) is used to connect e.g. JVB-1 to FPS-8.
Product Code
PCS-1 Power Cable: 0730012
View of PCS-1
Issue 1 02/04
Nokia Corporation
Page 19
RH-12/RH-28 Service Tools
CCS Technical Documentation
XRF-1 RF Cable
RF cable XRF-1 is used to connect e.g. Module Jig MJS-38 to RF measurement equipment.
Product code
XRF-1 RF Cable: 0730085
View of XRF-1
Page 20
Nokia Corporation
Issue 1 02/04
CCS Technical Documentation
RH-12/RH-28 Service Tools
DAU-9S MBUS Cable
The MBUS Cable DAU-9S has a modular connector, and is used with between PC's serial port and e.g. Module Jig MJS-38.
Product Code
DAU-9S MBUS Cable: 0730108
View of DAU-9S
Issue 1 02/04
Nokia Corporation
Page 21
RH-12/RH-28 Service Tools
CCS Technical Documentation
SCB-3 DC Cable
The DC Cable SCB-3 is used to connect e.g. JVB-1 to the phone.
Product Code
SCB-3 DC Cable: 0730114
View of SCB-3
B-3 DC Cable: -3 0730114
Page 22
Nokia Corporation
Issue 1 02/04
CCS Technical Documentation
RH-12/RH-28 Service Tools
XCS-4 Modular Cable
XCS-4 is a shielded cable (one specially shielded conductor) modular cable for flashing and service purposes.
Product code
XCS-4 Modular Cable: 0730178
View of XCS-4
View of XCS-4
Issue 1 02/04
Nokia Corporation
Page 23
RH-12/RH-28 Service Tools
CCS Technical Documentation
Printer Cable
This cable is used to connect the PC to FPS-8.
Product code
Printer Cable: 0730029
View of Printer Cable
Page 24
Nokia Corporation
Issue 1 02/04