Text preview for : 2898ST.pdf part of Daewoo 2898ST Daewoo 2898ST (AKA GB2898ST, P/N: 48586775E203) STEREO Colour Television User Manual
Back to : 2898ST.pdf | Home
Colour Television
2594ST / 2898ST
AUDIO VIDEO
L
R
PR
Instruction Manual
(Stereo color television)
P/N:48586775E203
IDENTITY OF FEATURES ON LOCAL AND REMOTE CONTROL
LOCAL CONTROL
Front
AUDIO VIDEO
Back
PR
L
R
MAIN POWER BUTTON
VIDEO INPUT
AUDIO INPUT
HEAD PHONE
STAND-BY INDICATOR
AV REMOTE SENSOR BUTTON
VOLUME DOWN/UP BUTTONS
PROGRAMME DOWN/UP BUTTONS
AERIAL SCART SCART SOCKET1 TERMINAL SOCKET2
REMOTE CONTROL
TV mode 1 POWER 2 NUMBER 0-9 3 MENU 4 AV 5 PR (CURSOR)UP 6 VOLUME UP (CURSOR RIGHT) 7 OK(NORMAL) 8 PR(CURSOR) DOWN 9 VOLUME DOWN(CURSOR LEFT) A MUTE B RECALL C SLEEP D SKIP E MOVE F DELETE G TELETEXT H Audio MODE I TIME
1
1 2 3
4
5
6
2
7 8 9
0
MENU
4
3
NORMAL
5
PR
9
OK
6
8
SLEEP
PR
7 10
RECALL
12
DEL MOVE SKIP
11 13
TIME MODE
15
14 17 18 16
TELETEXT mode 1 POWER 2 NUMBER 0-9 3 MENU 4 Not Used 5 PAGE UP 6 SUBPAGE 7 INDEX 8 PAGE DOWN 9 HOLD A MUTE B REVEAL C SIZE D CANCEL E G (VOLUME UP) F R (VOLUME DOWN) G TV H C (BRIGHT UP) I Y (BRIGHT DOWN)
1
CONTENTS
* Identity of features on Local and Remote Control * Important safeguards * Installation After moving the set Inserting Batteries into the Remote Control Unit Aerial connection Mains connection Switching the set on and off Tuning the TV Channels Edit Manual Channel Setting * Daily use Selecting a Programme Number Volume, Picture and Sound control Timer Sleep Recall Child Lock Time Mode * Teletext * Connecting the External Equipment 1 2 3 3 3 3 4 4 5 5 6 7 7 7 8 8 8 8 8 8 9 11
IMPORTANT SAFEGUARDS
Water / Moisture : Never install the set in the following places:in the bathroom, in a wet basement. Do not place any containers with liquid (e.g. flower vases) on the set. Heat : Never place the set near heat sources (e.g. radiator). Ventilation : Do not cover the ventilation openings in the cabinet. Never place the set in a confined space such as a bookcase or built-in-cabinet, unless proper ventilation is provided. Object Entry : Do not insert foreign objects, such as needles and coins, into the ventilation openings. Lightning Striking: You should disconnect your set from the mains and the aerial system during thunderstorms. Cleaning : Unplug the set from the mains before cleaning.
2
INSTALLATION
AFTER MOVING THE SET
If the used set is moved or placed in a different direction, the MAIN POWER button must be switched off for at least 15 minutes in order to take out a colour strain on the screen.
INSERTING BATTERIES INTO THE REMOTE CONTROL UNIT
Press down the battery compartment grip and slide the cover, Insert the batteries supplied(two 1.5v, type AA). Make sure that the polarity matches with the (+) and (-) marks inside of the battery compartment. Used batteries should be disposed of properly.
AERIAL CONNECTION
For better picture and sound quality, an effective aerial installation is the most important. If you are located in a relatively strong area, you will be able to use the indoor aerial. When using an outdoor aerial, it is ususlly connected to the set by means of 75 ohm coaxial cable.
3
MAINS CONNECTION
Plug the mains cable into the power socket with 220~240V 50Hz AC. Additional Information for the set sold in Great Britain The appliance is supplied with a moulded three pin mains plug fitted with a 5 Amp fuse. Should the fuse require replacement, it must be replaced with a fuse rated at 5 Amp and approved by ASTA or BSI to BS1362. The plug contains a removable fuse cover that must be refitted when the fuse is replaced. In the event of the fuse cover being lost or damaged, the plug must not be used until a replacement not be used until a replacement cover has been obtained. Replacement fuse covers can be purchased from your nearest electrical dealer and must be the same colour as the original. If the moulded mains plug is unsuitable for the socket outlet in your home or is removed for any other reason. Then the fuse should be removed and the cut off plug disposed of safely to prevent the hazard of electric shock. There is a danger of electric shock if the cut off plug is inserted into any socket outlet. If a replacement plug is to be fitted, please observe the wiring code shown below. The wires in the mains lead are coloured in accordance with the following code.: Blue - Neutral, Brown - Live As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter L or coloured red. Do not make any connection to the terminal in the plug which is marked by the letter E or by the safety earth symbol or coloured green or green and yellow.
SWITCHING THE SET ON AND OFF
Switching On Switch the set on with the MAIN POWER button, ( ). The set will turn on. If not, press either : - PR UP or DOWN button on the front of set - or POWER button or the UP/DOWN button or one of the NUMBER button 0..9 on the remote controller. The STAND-BY INDICATOR will turn off and a picture will appear on the screen. Switching off Press POWER button ( ) on the remote controller to return the set to its stand-by mode. The STAND-BY INDICATOR will illuminate. If you don't use the set for extended period of time, turn it off with MAIN POWER button .
4
TUNING THE TV CHANNELS
MAIN MENU Press the MENU button to call up the MAIN MENU. The MAIN MENU is consist of 5 sub-menus: PICTURE, SOUND, TIMER, LANGUAGE, PRESET, EDIT menu. LANGUAGE SELECTION Select a LANGUAGE menu at the MAIN MENU by placing the cursor on the LANGUAGE with UP/DOWN button and pressing the OK button. You can choose language you require with UP/DOWN button. Press the MENU button to return to the MAIN MENU. AUTOMATIC TUNING SYSTEM Select the PRESET menu at the MAIN MENU. Place the cursor to " " with the RIGHT button. Press and hold down OK button until the tuning screen appears above the PRESET menu. The cursor will move from left to right on the VHF-L line, then VHF-H, then UHF. Please wait until EDIT MENU appears.
MAIN MENU
PICTURE SOUND TIMER LANGUAGE PRESET EDIT
LANGUAGE ךלככהאג ENGLISH FRANCAIS DEUTSCH ITALIANO
PRESET
P01 AUTO SEARCH
PRESET
P UHF >>
P01
P
EDIT
The EDIT menu shows you the programme position assignment. You can change this programme position assignment according to your personal preferences. SKIPPING THE CHANNELS You can selet SKIP "YES" or "NO" with the SKIP button. A programme marked with SKIP "YES" is skipped when changing channel using the UP/DOWN button. A skipped programme number selected by NUMBER button 0..9 will be displayed in red. DELETE PROGRAMME POSITION DATA Position the cursor to programme number to delete with the UP/DOWN, LEFT/RIGHT buttons. Press the DEL button. While this is being carried out the "DELETE" Prog. No." appear and the "deleted" programme is moved to the programme no. 69 and changed SKIP "YES". The programme located in the programme no. 69 will move to the programme no. 68. CHANGING THE ORDER OF THE CHANNELS Position the cursor to programme number to move and press the MOVE button. The "MOVE Prog. No." will appear. Position the cursor to programme number to exchange and press the MOVE button. Two programmes will be exchanged. ENTER A STATION NAME, CHANGING THE PROGRAMME NUMBER AND COPYING A PROGRAMME You can go to the PRESET menu directly for entering a station name and changing the programme number and copying a programme to another programme no. by pressing the OK button. Refer to the MANUAL CHANNEL SETTING.
EDIT P 00 01 02 03 04 ---------------SKIP NO NO NO NO NO P 05 06 07 08 09 ---------------SKIP NO YES NO NO NO
EDIT P 00 01 02 03 04 ---------------SKIP NO NO NO NO NO DELETE P 05 06 07 08 09 ---------------SKIP NO NO NO NO NO
01
EDIT P 00 ARD 01 ZDF 02 BR3 03 SAT1 04 PR07 SKIP NO NO NO NO NO MOVE P 05 06 07 08 09 06 RTL2 ------------SKIP NO NO NO NO NO
5
MANUAL CHANNEL SETTING
You can also call up the PRESET menu at the MAIN MENU. Press the NUMBER button 0..9 or UP/DOWN buttons to select a programme number you want. The screen will change according to the selected programme number. SEARCHING A CHANNELS Locate a cursor to " " with LEFT/RIGHT button and then press the UP or DOWN button. The tuning screen will appear and the cursor will move from left to right. Pressing and holding down the UP/DOWN button during 2 seconds, the band will change as following: VL-VH-U (For GB, U only). After searching a station, the tuning screen will disappear. To stop searching, press the MENU button. FINE TUNING If you are unable to get a good picture or sound because of a poor broadcasting signal, it is possible to adjust the fine tuning. Move the cursor to and press UP or DOWN button to activate fine tuning up or down. It only operates while the UP or DOWN button is being pressed. The changes is memorized automatically. ENTER A STATION NAME Select station name in the station name list with UP/DOWN button and press OK button. If you want to delete a station name, select "----". If you can't find the desired name in the list, you can enter your own. To do so, move the cursor to the right and press OK button. Using the UP/DOWN button, select the desired letter, number or blank. Press the RIGHT button to select the next position. Press the OK button to complete this procedure. TO STORE PROGRAMME IN MEMORY Move the cursor to the right end with the LEFT/RIGHT button. Select the programme number that you want to store current displaying programme with station name and system in memory using the UP/DOWN button or NUMBER 0..9. Press the OK button.
PRESET
P01
P
SEARCH
PRESET
UHF
>>
P01
P
FINE TUNE
PRESET
UHF
>>
P01
---DRFS BBC1 BBC2 ITU CH4 PRESET
P
P01
BBC1
P
PRESET
P01
BBC1
P02
6
DAILY USE
SELECTING A PROGRAMME NUMBER
The set has a total of 70 programme numbers, 0..69. The NUMBER button 0..9 are used for direct programme selection. In order to select two-digit programm, press the second numbered button within two seconds. Switch through the programme number step by step with the UP/DOWN button.
VOLUME, PICTURE AND SOUND CONTROL
VOLUME CONTROL Adjust the volume with the VOLUME ( ) DOWN/UP buttons on the front of the set, or with the LEFT/RIGHT button on the remote control. MUTE Pressing the MUTE button ( ) once turns the sound off. The sound returns if the button is pressed once more or the programme no. is changed. NORMAL PICTURE SELECTION When you press the NORMAL button repeatedly you can call up three picture settings; for NORMAL I(hard picture), NORMAL II(soft picture), FAVOURITE (adjustable picture). PICTURE CONTROL Press the MENU button to call up the MAIN MENU. Press the OK button to call up the PICTURE MENU. You can select each function with the UP/DOWN buttons. Use the LEFT/RIGHT button adjust each function: BRIGHTNESS( )-CONTRAST( )-COLOUR( -SHARPNESS( )-TINT( ).
PICTURE 31 63 31 31 00
)
* The TINT is active only in NTSC system. The last set value is automatically stored in FAVOURITE mode. Note that if you set the brightness and contrast values too low, the Onscreen-display become dark. SOUND CONTROL Press the MENU button to call up the MAIN MENU. Press the OK button on the SOUND line. Select the required function by moving the cursor with the DOWN or UP button. Use the LEFT or RIGHT button to adjust the level of each function. 1. BASS Used to increase or decrease the bass of sound. 2. TREBLE Used to increase or decrease the treble of sound. 3. BALANCE Adjust the balance for the best stereo effect for your room conditions. 4. PSEUDO Used to obtain a pseudo stereo effect with mono transmissions.
SOUND 16 16 00
7
TIMER
In the MAIN MENU, Select TIMER menu. SETTING THE CLOCK Press the button on the CLOCK line. Set the hours and minutes with the NUMBER button 0..9 Press the OK button to complete. The clock will start. Note that if you turn the TV off with MAIN POWER button, the clock setting is lost and must be reset if necessary. SETTING THE WAKE UP TIME Set WAKE UP TIME in a same way to the above for CLOCK. Set ACTIVATE "YES" or "NO" with the LEFT/RIGHT button. When ACTIVATE is "YES", the function is enabled. Set WAKE UP PROG using the NUMBER button 0..9 or UP/DOWN button. When WAKE UP TIME is operate, the set will switch on to this programme number.
TIMER CLOCK WAKE UP TIME ACTIVATE WAKE UP PROG 12:20 --:-YES P 45
TIMER CLOCK WAKE UP TIME ACTIVATE WAKE UP PROG 12:20 7:00 YES P 45
SLEEP
By pressing the SLEEP button repeatedly, you can select one of the following setting: 0->30min. ->60min. ->90min. ->120min. ->0 The set will turn off after time you select. Automatic Switch-Off in No broadcast Signal If a broadcasting signal is not present for about 5-30 minutes, the set will be automatcally turned off. In AV mode, however, this function dose not operate.
RECALL
The RECALL button is used to diaplay the current status: programme number, station name and clock. This display appear for 5 seconds unless any button is pressed.
CHILD LOCK
You can prevent the use of the TV set without the remote control. The set is child-locked after switching off the set by pressing the Y, C, TELETEXT( ), POWER button ( ) in sequence on the remote control within 5 seconds. The child-lock function is indicated by flashing the STAND-BY INDICATOR. The set can only be switched back on using the remote control.
TIME
Pressing the TIME button, the current time is displayed on the screen during 5 seconds. If the programme you are watching has no Teletext transmission, no time will be displayed.
MODE
The MODE button is used to change the sound mode. During a stereo transmission, pression the button will change from stereo to mono. Pressing this button again will change it back to stereo. During a bilingual programme transmission, pressing the MODE button will change the language to the sound channel. Pressing again will change it back to the main channel. There may be case of stereo broadcasts where excessive noise will be heard due to weak incoming signal. You may be able to eliminate this noise by selecting the MONO mode.
8
TELETEXT
SWITCHING TELETEXT ON/OFF Press the TELETEXT button ( ). The index page viewed last will appear. Press the TELETEXT button to return to the TV mode. COLOUR BUTTONS IN TOP/FLOF TELETEXT A red, green, yellow and blue field is shown at the bottom of the screen. If TOP or FLOF teletext (FASTEXT) is transmitted by the station, pressing the corresponding colour button on the remote controller, you can select the desired page easily. SELECTING PAGES The NUMBER button 0..9 are used to enter a page number. The selected page number appears at the top of the screen and the page appears after a short time. The UP/DOWN buttons increase or decrease the current page number by 1. INDEX PAGE You can switch directly to the programme preview (with TOP text) or the overview page of the station you are currently viewing by pressing the INDEX ( ) button. PAGE HOLD Several sub pages can be combined under a page number and are scrolled at an interval determined by the television station. The presence of sub pages is indicated by, for exemple, 3/6 beneath the time, which means that you are looking at the 3rd page of a total of 6 pages. If you want to look at a subpage for a longer period of time, press the HOLD ( ) button. The contents of the subpage shown are kept on the screen and no longer updated or switched to other subpages. Pressing the HOLD button again, the current subpage appear. CALLING UP SUBPAGE DIRECTLY Pressing the SUBPAGE ( ) button, "Page no./--" appears at the bottom of the screen. Enter the subpage number that you want to call up with the NUMBER button 0..9, for example, the 2nd page, sequence 0002. The desired subpage is sought and displayed. To exit, press SUBPAGE ( ) button again.
9
WATCHING TELEVISION DURING TELETEXT MODE Some pages are continually update, for example, stock market reports, sports announcements, and the latest news. If you want to watch television and stay informed at the same time, press CANCEL ( ) button. The regular programme is still visible and the teletext symbol ( ) appears at the top of the screen. Pressing the CANCEL button again, the teletext page appears with the update information.
REVEAL ANSWER This function can be used on certain pages to reveal the solution of riddles. Press the REVEAL button ( ) to reveal a hidden answer and press again to hide it.
DOUBLING CHARACTER SIZE Repeatedly pressing the SIZE button ( ) doubles the character size in the following order: Upper half of the page-> Lower half of the page-> Return to normal size.
VOLUME AND BRIGHTNESS CONTROL IN TELETEXT MODE ONLY IN MIX MODE Pressing the MENU button in teletext mode, the volume and brightness control menu will be displayed in the bottom of the screen. You can adjust volume and brightness using the corresponding colour button on the remote control.
10
CONNECTING THE EXTERNAL EQUIPMENT
HEAD PHONE JACK Insert the headphone plug(ר 3.5mm) into the headphone socket. The sound from the speaker will be cut off.
FRONT/BACK SCART AV JACK Connect the AV(AUDIO/VIDEO) socket with an appreciate cable to the corresponding socket of the external equipment. Select AV mode by pressing the AV button. Press the AV button to return to the TV mode.
NOTE: The front AV terminal and the back SCART AV terminal are common. If you use the front AV terminal, disconnect the back SCART AV terminal with the external equipment.
11
MEMO
12