Text preview for : bulletin TVP0511_®_.pdf part of Sony KP-61HS10 KP-61XBR300 KP-53HS10 KP-53XBR300 Symptom: Topside of the picture is distorted in 1080i/480p when connected to Star Choice
satellite receiver into the projection TV’s Video 5 input. This symptom will only occur
in a component Y, Pb, Pr configuration - pag. 2
Back to : bulletin TVP0511_®_.pdf | Home
Sony Service Company National Technical Services A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656
CONFIDENTIAL
Service Bulletin TV Products
No.
CSV-1
Model:
KP-53HS10, KP-53XBR300 KP-61HS10, KP-61XBR300
511
Subject: Picture distortion occurs when connected to Star Choice (HDD-201) satellite receiver. Symptom: (132X)
Date: December 6, 2000
Topside of the picture is distorted in 1080i/480p when connected to Star Choice satellite receiver into the projection TV's Video 5 input. This symptom will only occur in a component Y, Pb, Pr configuration. The HDD201 has non-standard sync pulses on the Y output signal during the vertical blanking time. These pulses effect the TV's video processing resulting in picture distortions. For both Y, Pb, Pr and RGB connection configurations, a separate H & V Sync connection cable must be used between the satellite receiver and the video 5 input on the TV. In order to correct this symptom, a standard type RCA audio patch cable may be used. (See photos below.) The Star Choice (HDD-201) satellite receiver is designed to be sold and used in Canada only. Therfore this problem should not be seen in the USA.
Cause:
Solution:
NOTE:
Picture of symptom on screen:
Reference: TV2000-15
PRINTED IN USA
TV Products Service Bulletin No. 511
Connection on rear side of Star Choice HDD-201: Separate H and V sync cables required to connect to KP-53HS10 and KP-61HS10 video 5 input.
Connection to Rear side of HS10 model Connect separate H and V sync from Star Choice cables to KP-53 and 61HS10 video 5 input