Text preview for : MANUAL SERVICE MX5203MS 12.pdf part of POLYTRON ( INDONESIA ) MX5203MS It used STV2286H , AN5891K , TDA8174 , STB9NK70Z-1 Complete Service Manual in RAR file type.sent by [email protected]



Back to : MX5203MS Service Manual | Home

Service Manual BML Myanmar IV. ADJUSTMENT ABL A. For HBBA-061A :
1. G2 and White Balance Adjustment : Presetting Condition : Brightness Contrast Color PNR Blue back R / G / B Cut off R / GB Gain R DC , G DC = 32 Trimpot G2 Pic Improve = 70 = 100 = 50 = off = on = 60 (20",21",21RF) = 50 = Minimum = ON (menu)

PT.Hartono Istana Teknologi

Use White Balance (White Black) pattern Acces to Service Mode. a. For IC Micom HBM-00-08 : - Make 1 horizontal line (raster tip) by pressing yellow button on remote control. - Set trimpot G2 until we got 1 horizontal line with enough intensity and notice the domi nance color. - return to the normal position by pressing yellow button. - Adjust trimpot G2 until we got voltage on cathoda dominance as bellow : - For 21" Real Flat - For 20" and 21" = 136Vdc ± 1Vdc = 130Vdc ± 1Vdc

b. For IC micom HBM-01-04 : - Measure the third cathode (KB, KG, KR) and look for cathode with highest value. - Set trimpot G2 until voltage on highest cathoda as bellow : - For 21" Real Flat = 136Vdc ± 1Vdc - For 20" and 21" = 130Vdc ± 1Vdc - Use Chroma meter for White Balance Adjustment. - Plug in Chroma meter probe on the black side. - Adjust R & G DC, to get standard value : x = 264 ± 5

y = 256 ± 5 Y = 1.8 s/d 5 - Press menu button to save data Adjustment.

}

xy 5

- Change its probe to the white one. - Adjust R gain B gain and G gain to get standard value : X = 264 ± 5 Y = 266 ± 5

}

xy 5
Minolta CA-100+

11