Text preview for : Operation Instruction & Installation.pdf part of Samsung LE26R71B, LE26R72B, LE26R75B, LE32R71B Service Manual TFT-LCD TV - [16 File] Part 1/7 - (mod. LE32R72B, LE32R75B, LE32R76B, LE37R72B, LE40R71B, LE40R72B, LE40R75B, LE40R76B)



Back to : TFT-LCD_TV__.part1.rar | Home

10 Operating Instructions and Installation

10 Operating Instructions and Installation
10-1 Front

- The product color and shape may vary depending on the model.

1. SOURCE Displays a menu of all of the available input sources (TV, Ext.1, Ext.2, AV, S-Video, Component, PC, DVI). In the on-screen menu, use this button as you use the ENTER 2. MENU Press to see an on-screen menu of your TV's features. 3. Press to decrease or increase the volume. In the on-screen menu, use the you use the 4. C/P. Press to change channels. In the on-screen menu, use the as you use the 5. SPEAKERS and C/P. buttons buttons on the remote control. and buttons as buttons on the remote control. button on the remote control.

6. POWER INDICATOR Blinks and turns off when the power is on and lights up in stand-by mode. 7. REMOTE CONTROL SENSOR Aim the remote control towards this spot on the TV. 8. (POWER) Press to turn the TV on and off.

10-1

10 Operating Instructions and Installation

10-2 Connection Panel

10-2

10 Operating Instructions and Installation

1. Connecting an Aerial or Cable Television Network To view television channels correctly, a signal must be received by the set from one of the following sources: - An outdoor aerial / A cable television network / A satellite network 2. Connecting HDMI/DVI - Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players, AV receivers and digital TVs). - No sound connection is needed for an HDMI to HDMI connection. What is HDMI? - HDMI, or high-definition multimedia interface, is a next-generation interface that enables the transmission of digital audio and video signals using a single cable without compression. - "Multimedia interface" is a more accurate name for it especially because it allows multiple channels of digital audio(5.1 channels).The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP(High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio. - Use the HDMI/DVI terminal for DVI connection to an extended device. You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the "R - AUDIO - L" terminal on DVI for sound output. 3. Connecting Set-Top Box, VCR or DVD - Connect the VCR or DVD SCART cable to the SCART connector of the VCR or DVD. - If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top Box to the VCR (or DVD) and connect the VCR (or DVD) to your set. 5. Connecting External A/V Devices - Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder. - Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio out connectors on the A/V device. - Headphone may be connected to the headphone output ( 4 ) on the rear of your set. While the headphone is connected, the sound from the built-in speakers will be disabled. 6. SERVICE - Connector for engineer. 7. Connecting AUDIO - Connect RCA audio cables to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio in connectors on the Amplifier or DVD Home Theater. 8. Connecting Computer - Connect the D- Sub cable (optional) to "PC (PC IN)" on the rear of your set and the other end to the Video Card of your computer. - Connect the stereo audio cable (optional) to "AUDIO (PC IN)" on the rear of your set and the other end to "Audio Out" of the sound card on your computer. 9. Connecting Component Devices (DTV/DVD) - Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of your set and the other ends to corresponding component video out connectors on the DTV or DVD. - If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("PR", "PB", "Y") on your set. - The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr. - Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD. - This LCD TV displays the optimum picture in 720p mode. 10. Kensington Lock - The Kensington lock (optional) is a device used to physically fix the system when used in a public place. - If you want to use a locking device, contact the dealer where you purchased the TV. - The place of the Kensington Lock may be different depending on its model.

10-3

10 Operating Instructions and Installation

10-3 Remote Control
1 2 3 4 5 6 Television Standby button Number buttons for direct channel access One/Two-digit channel selection Selects the TV mode directly It display "Channel Manager" on the screen. Volume decrease Volume increase 7 Temporary sound switch-off 8 Menu display and change confirmation 9 Sound mode selection 10 Picture-In-Picture On / Off 11 Picture effect selection 12 PIP FUNCTIONS SOURCE: Input source selection SWAP: Interchange the main and sub picture SIZE: PIP size selection POSITION: PIP position selection P : Next channel P : Previous channel 13 Sound effect selection 14 SRS TSXT selection 15 Available source selection 16 Previous channel 17 Selects the PC mode directly 18 Automatic Power-off 19 P : Next channel P : Previous channel 20 Exit the OSD 21 Control the cursor in the menu 22 Use to see information on the current broadcast 23 Picture freeze 25 Picture size selection Teletext Functions 4 Exit from the teletext display 8 Teletext index 10 Teletext hold 12 SOURCE: Teletext size selection SWAP: Teletext store 15 Teletext mode selection (LIST/FLOF) 16 Teletext sub page 19 P : Teletext next page P : Teletext previous page 20 Teletext cancel 22 Teletext reveal 24 Teletext display/mix both teletext information and the normal broadcast 9, 11, 23, 25 Fastext topic selection

10-4

10 Operating Instructions and Installation

10-4 Installing the Stand

1. Place the TV faced down on a soft cloth or cushion on a table. 2. Put the stand into the hole at the bottom of the TV. 3. Insert screw into the hole indicated and tighten.

10-5

10 Operating Instructions and Installation

Memo

10-6