Text preview for : Hp_LaserJetP3005_ServiceManual.pdf part of Hp LaserJet P3005 Hp LaserJet P3005 Service Manual



Back to : Hp_LaserJetP3005_ServiceM | Home

HP LaserJet P3005 Series printers
Service Manual

HP LaserJet P3005 Series printers

Service Manual

Copyright information © 2006 Copyright Hewlett-Packard Development Company, L.P. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Part number: Q7812-90910 Edition 1, 10/2006

Safety information WARNING! Potential Shock Hazard Always follow basic safety precautions when using this product to reduce risk of injury from fire or electric shock. Read and understand all instructions in the user guide. Observe all warnings and instructions marked on the product. Use only a grounded electrical outlet when connecting the product to a power source. If you do not know whether the outlet is grounded, check with a qualified electrician. Do not touch the contacts on the end of any of the sockets on the product. Replace damaged cords immediately. Unplug this product from wall outlets before cleaning. Do not install or use this product near water or when you are wet. Install the product securely on a stable surface. Install the product in a protected location where no one can step on or trip over the power cord and where the power cord will not be damaged. If the product does not operate normally, see the online user guide. Refer all servicing questions to qualified personnel. Information regarding FCC Class B, Parts 15 and 68 requirements can be found in the user guide.

Trademark credits Adobe®, Acrobat®, PostScript®, and the Acrobat Logo® are trademarks of Adobe Systems Incorporated. JavaTM is a U.S. trademark of Sun Microsystems, Inc. Microsoft®, Windows®, and Windows NT® are U.S. registered trademarks of Microsoft Corporation. UNIX® is a registered trademark of The Open Group. ENERGY STAR® and the ENERGY STAR logo® are U.S. registered marks of the United States Environmental Protection Agency.

Table of contents

1 Device information Chapter contents .................................................................................................................................. 1 Device configurations ........................................................................................................................... 2 Features ............................................................................................................................................... 3 Walkaround .......................................................................................................................................... 5 Device parts ......................................................................................................................... 5 Interface ports ...................................................................................................................... 6 Control-panel layout ............................................................................................................. 7 Device software .................................................................................................................................... 9 Minimum system requirements ............................................................................................ 9 Supported operating systems .............................................................................................. 9 Supported printer drivers ................................................................................................... 10 Software for Windows computers ...................................................................................... 10 HP Web Jetadmin ............................................................................................. 10 HP Easy Printer Care software ......................................................................... 10 Supported operating systems ........................................................... 10 Supported browsers ......................................................................... 11 Software for Macintosh computers .................................................................................... 11 Other software ................................................................................................................... 11 Embedded Web server ..................................................................................... 11 Uninstall software .............................................................................................................. 12 Remove software from Windows operating systems ........................................ 12 Remove software from Macintosh operating systems ...................................... 12 Media specifications ........................................................................................................................... 13 Select print media .............................................................................................................. 13 Supported media sizes ...................................................................................... 14 Supported media types ..................................................................................... 15 Paper to avoid .................................................................................................................... 16 2 Installation and configuration Chapter contents ................................................................................................................................ 17 Site preparation .................................................................................................................................. 18 Location specifications ....................................................................................................... 18 Operating environment ..................................................................................................... 18 Load input trays .................................................................................................................................. 19 Load tray 1 (multipurpose tray) .......................................................................................... 19 Load tray 2 and optional tray 3 ......................................................................................... 21 Install supplies .................................................................................................................................... 23 Supply replacement guidelines .......................................................................................... 23

ENWW

iii

Change the print cartridge ................................................................................................. 23 Install accessories .............................................................................................................................. 26 Install memory ................................................................................................................... 26 Install device memory ....................................................................................... 26 Check DIMM installation .................................................................................................... 29 Enable memory for Windows ............................................................................................. 30 Use HP Jetdirect print server cards ................................................................................... 30 Install an HP Jetdirect print server card ............................................................ 30 Remove an HP Jetdirect print server card ........................................................ 31 3 Maintenance Chapter contents ................................................................................................................................ 33 Manage supplies ................................................................................................................................ 34 Supplies life ....................................................................................................................... 34 Approximate print-cartridge replacement intervals ............................................................ 34 Manage the print cartridge ................................................................................................. 34 Print-cartridge storage ....................................................................................... 34 Use genuine HP print cartridges ....................................................................... 34 HP policy on non-HP print cartridges ................................................................ 34 Print-cartridge authentication ............................................................................ 35 HP fraud hotline and Web site .......................................................................... 35 Clean the device ................................................................................................................................. 36 Clean the exterior .............................................................................................................. 36 Clean the paper path ......................................................................................................... 36 Clean spilled toner ............................................................................................................. 36 Clean the fuser .................................................................................................................. 36 Management tools .............................................................................................................................. 38 Use information pages ....................................................................................................... 38 Use the HP Easy Printer Care software ............................................................................ 39 Open the HP Easy Printer Care software ......................................................... 39 HP Easy Printer Care software sections ........................................................... 40 Use the embedded Web server ......................................................................................... 41 Open the embedded Web server by using a network connection ..................... 41 Embedded Web server sections ....................................................................... 41 Use HP Web Jetadmin software ........................................................................................ 43 Use the HP Printer Utility for Macintosh ............................................................................ 43 Open the HP Printer Utility ................................................................................ 44 HP Printer Utility features .................................................................................. 44 4 Theory of operation Chapter contents ................................................................................................................................ 45 Basic operation ................................................................................................................................... 46 Formatter ........................................................................................................................... 46 Engine control unit (ECU) .................................................................................................. 47 Pickup/feed/delivery system .............................................................................................. 50 Laser/scanner system ........................................................................................................ 51 Image-formation system .................................................................................................... 52 Step 1: Primary charging ................................................................................... 53 Step 2: Laser beam exposure ........................................................................... 53 Step 3: Developing ............................................................................................ 53

iv

ENWW

Step 4: Transfer ................................................................................................ 54 Step 5: Separation ............................................................................................ 54 Step 6: Fusing ................................................................................................... 54 Step 7: Drum cleaning ....................................................................................... 55 Internal components ........................................................................................................................... 56 Timing ................................................................................................................................................. 58 Print cartridge memory system ........................................................................................................... 61 5 Removal and replacement Chapter contents ................................................................................................................................ 63 Overview ............................................................................................................................................ 65 Removal and replacement strategy .................................................................................. 65 Electrostatic discharge ....................................................................................................... 65 Required tools .................................................................................................................... 65 Types of screws ................................................................................................................. 66 Service approach ............................................................................................................................... 67 Before performing service .................................................................................................. 67 Pre-service procedures ..................................................................................... 67 Parts removal order ........................................................................................... 68 After performing service ..................................................................................................... 68 Covers ................................................................................................................................................ 69 Right-side cover ................................................................................................................. 69 Left-side cover ................................................................................................................... 70 Back cover ......................................................................................................................... 72 I/O cover ............................................................................................................................ 72 Top, right cover .................................................................................................................. 73 Top cover ........................................................................................................................... 74 Front, right cover ................................................................................................................ 75 Control panel ...................................................................................................................................... 78 Formatter ............................................................................................................................................ 80 Fuser .................................................................................................................................................. 83 Laser/scanner ..................................................................................................................................... 86 Engine control unit (ECU) ................................................................................................................... 88 Access plate ....................................................................................................................................... 96 High-voltage power supply ................................................................................................................. 97 Paper feed guide assembly .............................................................................................................. 104 Main motor ....................................................................................................................................... 106 Gear assembly ................................................................................................................................. 108 Reinstallation notes for the gear assembly ...................................................................................... 110 Tray 1 solenoid ................................................................................................................................. 111 Tray 2 solenoid ................................................................................................................................. 112 E-label reader (memory tag) ............................................................................................................ 113 Face-down-roller shaft ...................................................................................................................... 115 Cartridge door .................................................................................................................................. 117 Transfer roller ................................................................................................................................... 120 Registration assembly ...................................................................................................................... 121 Tray 1 pickup roller ........................................................................................................................... 124 Tray 2 pickup roller ........................................................................................................................... 125 Separation pad ................................................................................................................................. 127

ENWW

v

6 Troubleshooting Chapter contents .............................................................................................................................. 129 Troubleshooting process .................................................................................................................. 130 Basic troubleshooting ...................................................................................................... 130 Control-panel messages .................................................................................................................. 131 Control-panel message types .......................................................................................... 131 Resolve control-panel messages ..................................................................................... 131 Clear jams ........................................................................................................................................ 148 Avoid jams ...................................................................................................................... 148 Typical jam locations ....................................................................................................... 149 Jam detection .................................................................................................. 150 Clear jams from the input-tray areas ............................................................... 151 Clear jams from the print-cartridge area ......................................................... 153 Clear jams from the output-bin areas .............................................................. 154 Clear jams from the optional duplexer ............................................................ 155 Interface troubleshooting ................................................................................................................. 157 Communications checks .................................................................................................. 157 Computer direct connect (parallel) test ........................................................... 157 EIO troubleshooting ......................................................................................................... 157 Jetdirect page .................................................................................................. 158 Network printing problems ............................................................................................... 158 Service mode functions .................................................................................................................... 160 Cold reset ........................................................................................................................ 160 NVRAM initialization ........................................................................................................ 160 Hard-disk initialization ...................................................................................................... 161 Skip disk-load .................................................................................................................. 161 Self test ............................................................................................................................ 161 Service menu (service PIN codes) .................................................................................. 161 Service ID ........................................................................................................................ 162 Restoring the service ID .................................................................................. 162 Convert the service ID to an actual date ......................................................... 163 Troubleshooting tools ....................................................................................................................... 164 Control-panel menus ....................................................................................................... 164 Diagnostics menu ............................................................................................ 164 Test pages ...................................................................................................................... 165 Engine-test page ............................................................................................. 165 Formatter test page ......................................................................................... 166 Image defect ruler ............................................................................................................ 167 Upgrade the firmware ....................................................................................................................... 168 Determine the current firmware version ........................................................................... 168 Download the new firmware from the HP Web site ......................................................... 168 Transfer the new firmware to the device .......................................................................... 168 Use FTP to upgrade the firmware on a network connection ........................... 168 Use HP Web Jetadmin to upgrade the firmware ............................................. 169 Use MS-DOS commands to upgrade the firmware ......................................... 170 Upgrade the HP Jetdirect firmware .................................................................................. 171 Troubleshoot general printing problems ........................................................................................... 172 Troubleshoot media handling problems ........................................................................................... 175 Multiple pages feed .......................................................................................................... 175 Pages are wrinkled or folded ........................................................................................... 175

vi

ENWW

Pages are skewed ........................................................................................................... 175 Troubleshoot print-quality problems ................................................................................................ 177 Print-quality checklist ....................................................................................................... 177 Image-defect examples ................................................................................................... 178 Light print (partial page) .................................................................................................. 179 Light print (entire page) ................................................................................................... 180 Specks ............................................................................................................................. 180 Dropouts .......................................................................................................................... 181 Lines ................................................................................................................................ 181 Gray background ............................................................................................................ 182 Toner smear ................................................................................................................... 182 Loose toner ..................................................................................................................... 183 Repeating defects ........................................................................................................... 183 Repeating image ............................................................................................................. 184 Misformed characters ...................................................................................................... 184 Page skew ....................................................................................................................... 185 Curl or wave .................................................................................................................... 185 Wrinkles or creases ......................................................................................................... 186 Vertical white lines ........................................................................................................... 186 Tire tracks ....................................................................................................................... 187 White spots on black ....................................................................................................... 187 Scattered lines ................................................................................................................ 188 Blurred print .................................................................................................................... 188 Random image repetition ................................................................................................. 189 Diagrams .......................................................................................................................................... 190 Device component locations ............................................................................................ 190 Main assemblies ............................................................................................. 190 Main parts ....................................................................................................... 191 Sensors and switches ..................................................................................... 192 Motors, fans, and solenoids ............................................................................ 193 PCAs ............................................................................................................... 194 Wiring diagrams ............................................................................................................... 194 7 Parts and diagrams Chapter contents .............................................................................................................................. 199 Order parts, accessories, and supplies ............................................................................................ 200 Order directly from HP ..................................................................................................... 200 Order through service or support providers ..................................................................... 200 Order directly through the embedded Web server (for printers that are connected to a network) ........................................................................................................................... 200 Order directly through the HP Easy Printer Care software .............................................. 200 Part numbers .................................................................................................................................... 201 Paper-handling accessories ............................................................................................ 201 Print cartridge .................................................................................................................. 201 Memory ............................................................................................................................ 201 Cables and interfaces ...................................................................................................... 202 Covers .............................................................................................................................................. 204 Internal components ......................................................................................................................... 206 Tray 2 pickup assembly .................................................................................................................... 222 Alphabetical parts list ....................................................................................................................... 224

ENWW

vii

Numerical parts list ........................................................................................................................... 233 Appendix A Specifications Physical specifications ..................................................................................................................... 244 Electrical specifications .................................................................................................................... 245 Acoustic specifications ..................................................................................................................... 246 Operating environment ..................................................................................................................... 246 Appendix B Service and support Hewlett-Packard limited warranty statement .................................................................................... 247 Customer self repair warranty service .............................................................................................. 248 Print cartridge limited warranty statement ........................................................................................ 249 HP Customer Care ........................................................................................................................... 250 Online Services ................................................................................................................ 250 Telephone support ........................................................................................................... 250 Software utilities, drivers, and electronic information ....................................................... 250 HP direct ordering for accessories or supplies ................................................................ 250 HP service information ..................................................................................................... 250 HP service agreements ................................................................................................... 250 HP Easy Printer Care software ........................................................................................ 251 HP support and information for Macintosh computers ..................................................... 251 HP maintenance agreements ........................................................................................................... 252 On-site service agreements ............................................................................................. 252 Next-day on-site service .................................................................................. 252 Weekly (volume) on-site service ..................................................................... 252 Repacking the device ...................................................................................................... 252 Extended warranty ........................................................................................................... 253 Appendix C Regulatory information FCC regulations ............................................................................................................................... 256 Environmental product stewardship program ................................................................................... 257 Protecting the environment .............................................................................................. 257 Ozone production ............................................................................................................ 257 Power consumption ......................................................................................................... 257 Toner consumption .......................................................................................................... 257 Paper use ........................................................................................................................ 257 Plastics ............................................................................................................................ 257 HP LaserJet print supplies ............................................................................................... 257 HP print supplies returns and recycling program information .......................................... 258 Paper ............................................................................................................................... 258 Material restrictions .......................................................................................................... 258 Disposal of waste equipment by users in private households in the European Union ............................................................................................................................... 259 Material Safety Data Sheet (MSDS) ................................................................................ 259 For more information ....................................................................................................... 259 Declaration of conformity .................................................................................................................. 261 Safety statements ............................................................................................................................. 262 Laser safety ..................................................................................................................... 262 Canadian DOC regulations .............................................................................................. 262

viii

ENWW

VCCI statement (Japan) .................................................................................................. 262 Power cord statement (Japan) ......................................................................................... 262 EMI statement (Korea) ..................................................................................................... 262 Laser statement for Finland ............................................................................................. 263 Index ................................................................................................................................................................. 265

ENWW

ix

x

ENWW

List of tables

Table 1-1 Table 1-2 Table 1-3 Table 1-4 Table 4-1 Table 4-2 Table 6-1 Table 6-2 Table 6-3 Table 6-4 Table 6-5 Table 6-6 Table 7-1 Table 7-2 Table 7-3 Table 7-4 Table 7-5 Table 7-6 Table 7-7 Table 7-8 Table 7-9 Table 7-10 Table A-1 Table A-2 Table A-3 Table A-4 Table A-5 Table A-6

Supported media sizes ..................................................................................................................... 14 Automatic 2-sided printing ............................................................................................................... 14 Tray 1 media types ........................................................................................................................... 15 Tray 2 and tray 3 media types .......................................................................................................... 15 Operation sequences ....................................................................................................................... 58 Power-on sequence ......................................................................................................................... 58 Common causes of jams ................................................................................................................ 148 Diagnostics menu ........................................................................................................................... 164 Causes for multiple pages feeding ................................................................................................. 175 Causes for wrinkled or folded paper at the paper-path entrance ................................................... 175 Causes for wrinkled or folded paper at the paper-path exit ........................................................... 175 Causes for skewed pages .............................................................................................................. 175 Covers ............................................................................................................................................ 205 Internal components (1 of 6) .......................................................................................................... 207 Internal components (2 of 6) .......................................................................................................... 211 Internal components (3 of 6) .......................................................................................................... 215 Internal components (4 of 6) .......................................................................................................... 217 Internal components (5 of 6) .......................................................................................................... 219 Internal components (6 of 6) .......................................................................................................... 221 Tray 2 pickup assembly ................................................................................................................. 223 Alphabetical parts list ..................................................................................................................... 224 Numerical parts list ....................................................................................................................... 233 Device dimensions ......................................................................................................................... 244 Device dimensions with all doors and trays fully opened .............................................................. 244 Power requirements ....................................................................................................................... 245 Power consumption (average, in watts) ........................................................................................ 245 Sound power and pressure level ................................................................................................... 246 Necessary conditions ..................................................................................................................... 246

ENWW

xi

xii

ENWW

List of figures

Figure 1-1 Figure 4-1 Figure 4-2 Figure 4-3 Figure 4-4 Figure 4-5 Figure 4-6 Figure 4-7 Figure 4-8 Figure 4-9 Figure 4-10 Figure 4-11 Figure 4-12 Figure 4-13 Figure 4-14 Figure 4-15 Figure 4-16 Figure 4-17 Figure 4-18 Figure 5-1 Figure 5-2 Figure 5-3 Figure 5-4 Figure 5-5 Figure 5-6 Figure 5-7 Figure 5-8 Figure 5-9 Figure 5-10 Figure 5-11 Figure 5-12 Figure 5-13 Figure 5-14 Figure 5-15 Figure 5-16 Figure 5-17 Figure 5-18 Figure 5-19 Figure 5-20

Model and serial numbers ................................................................................................................. 6 Systems overview ........................................................................................................................... 46 Print engine general structure ......................................................................................................... 47 Engine control system circuit diagram ............................................................................................ 48 Low-voltage power supply circuit diagram ...................................................................................... 49 Pickup/feed/delivery system ........................................................................................................... 50 Laser/scanner system ..................................................................................................................... 51 Print cartridge diagram .................................................................................................................... 52 Image-formation system ................................................................................................................. 52 Primary charging ............................................................................................................................. 53 Developing .................................................................................................................................... 53 Transfer ......................................................................................................................................... 54 Separation ..................................................................................................................................... 54 Fusing ........................................................................................................................................... 55 Drum cleaning ............................................................................................................................... 55 Cross-section of device ................................................................................................................. 56 Operational sequences ................................................................................................................. 59 Timing diagram ............................................................................................................................. 60 Print cartridge memory tag ............................................................................................................ 61 Parts removal diagram .................................................................................................................... 68 Removing the right-side cover ........................................................................................................ 69 Removing the left-side cover (1 of 2) .............................................................................................. 70 Removing the left-side cover (2 of 2) .............................................................................................. 71 Removing the back cover ............................................................................................................... 72 Removing the I/O cover .................................................................................................................. 73 Removing the top, right cover ......................................................................................................... 74 Removing the top cover .................................................................................................................. 75 Removing the front, right cover (1 of 2) .......................................................................................... 76 Removing the front, right cover (2 of 2) ........................................................................................ 77 Removing the control panel .......................................................................................................... 78 Reinstalling the control panel ........................................................................................................ 79 Removing the formatter (1 of 3) .................................................................................................... 80 Removing the formatter (2 of 3) .................................................................................................... 81 Removing the formatter (3 of 3) .................................................................................................... 82 Removing the fuser (1 of 3) .......................................................................................................... 83 Removing the fuser (2 of 3) .......................................................................................................... 84 Removing the fuser (3 of 3) .......................................................................................................... 85 Removing the laser/scanner (1 of 2) ............................................................................................. 86 Removing the laser/scanner (2 of 2) ............................................................................................. 87

ENWW

xiii

Figure 5-21 Figure 5-22 Figure 5-23 Figure 5-24 Figure 5-25 Figure 5-26 Figure 5-27 Figure 5-28 Figure 5-29 Figure 5-30 Figure 5-31 Figure 5-32 Figure 5-33 Figure 5-34 Figure 5-35 Figure 5-36 Figure 5-37 Figure 5-38 Figure 5-39 Figure 5-40 Figure 5-41 Figure 5-42 Figure 5-43 Figure 5-44 Figure 5-45 Figure 5-46 Figure 5-47 Figure 5-48 Figure 5-49 Figure 5-50 Figure 5-51 Figure 5-52 Figure 5-53 Figure 5-54 Figure 5-55 Figure 5-56 Figure 5-57 Figure 5-58 Figure 5-59 Figure 5-60 Figure 6-1 Figure 6-2 Figure 6-3 Figure 6-4 Figure 6-5 Figure 6-6 Figure 6-7 Figure 6-8 Figure 6-9 Figure 6-10

Removing the ECU (1 of 8) ........................................................................................................... 88 Removing the ECU (2 of 8) ........................................................................................................... 89 Removing the ECU (3 of 8) ........................................................................................................... 90 Removing the ECU (4 of 8) ........................................................................................................... 91 Removing the ECU (5 of 8) ........................................................................................................... 92 Removing the ECU (6 of 8) ........................................................................................................... 93 Removing the ECU (7 of 8) ........................................................................................................... 94 Removing the ECU (8 of 8) ........................................................................................................... 95 Removing the access plate (1 of 2) .............................................................................................. 96 Removing the access plate (2 of 2) .............................................................................................. 96 Removing the power supply (1 of 5) ............................................................................................. 97 Removing the power supply (2 of 5) ............................................................................................. 98 Removing the power supply (3 of 5) ............................................................................................. 99 Removing the power supply (4 of 5) ........................................................................................... 100 Removing the power supply (5 of 5) ........................................................................................... 101 Grounding-spring locations ......................................................................................................... 102 Reinstalling the oblique-roller assembly .................................................................................... 103 Removing the paper feed guide assembly ................................................................................. 104 Removing the main motor (1 of 2) .............................................................................................. 106 Removing the main motor (2 of 2) .............................................................................................. 107 Removing the gear assembly (1 of 3) ......................................................................................... 108 Removing the gear assembly (3 of 3) ......................................................................................... 109 Reinstalling the gear assembly ................................................................................................... 110 Removing the tray 1 solenoid ..................................................................................................... 111 Removing the tray 2 solenoid ..................................................................................................... 112 Removing the e-label reader (1 of 2) .......................................................................................... 113 Removing the e-label reader (2 of 2) .......................................................................................... 114 Removing the face-down-roller shaft (1 of 2) .............................................................................. 115 Removing the face-down-roller shaft (2 of 2) .............................................................................. 116 Removing the cartridge door (1 of 3) .......................................................................................... 117 Removing the cartridge door (2 of 3) .......................................................................................... 118 Removing the cartridge door (3 of 3) .......................................................................................... 119 Removing the transfer roller ........................................................................................................ 120 Removing the registration assembly (1 of 3) .............................................................................. 121 Removing the registration assembly (2 of 3) .............................................................................. 122 Removing the registration assembly (3 of 3) .............................................................................. 123 Removing the tray 1 pickup roller ............................................................................................... 124 Removing the tray 2 pickup roller (1 of 2) ................................................................................... 125 Removing the tray 2 pickup roller (2 of 2) ................................................................................... 126 Removing the separation pad ..................................................................................................... 127 Jam-detection sensors .................................................................................................................. 150 Jetdirect page ............................................................................................................................... 158 Locating the engine-test-page switch ........................................................................................... 166 Main assemblies ........................................................................................................................... 190 Main parts ..................................................................................................................................... 191 Sensors and switches ................................................................................................................... 192 Motors, fans, and solenoids .......................................................................................................... 193 PCAs ............................................................................................................................................. 194 ECU wiring .................................................................................................................................... 195 Circuit diagram (1 of 2) ............................................................................................................... 196

xiv

ENWW

Figure 6-11 Figure 7-1 Figure 7-2 Figure 7-3 Figure 7-4 Figure 7-5 Figure 7-6 Figure 7-7 Figure 7-8

Circuit diagram (2 of 2) ............................................................................................................... 197 Covers ........................................................................................................................................... 204 Internal components (1 of 6) ......................................................................................................... 206 Internal components (2 of 6) ......................................................................................................... 210 Internal components (3 of 6) ......................................................................................................... 214 Internal components (4 of 6) ......................................................................................................... 216 Internal components (5 of 6) ......................................................................................................... 218 Internal components (6 of 6) ......................................................................................................... 220 Tray 2 pickup assembly ................................................................................................................ 222

ENWW

xv

xvi

ENWW

1

Device information

Chapter contents
Device configurations Features Walkaround Device software Media specifications

ENWW

Chapter contents

1

Device configurations
HP LaserJet P3005 HP LaserJet P3005d HP LaserJet P3005n HP LaserJet P3005dn HP LaserJet P3005x



Prints up to HP LaserJet P3005, 35 pages-perplus: minute (ppm) on Automatic two letter-sized media, sided printing and up to 33 ppm on accessory A4-sized media 48 megabytes (MB) total of random access memory (RAM) 100-sheet multipurpose tray (tray 1), 500-sheet input tray (tray 2), and 250-sheet output bin Hi-Speed universal serial bus (USB) 2.0 port One open dual inline memory module (DIMM) slot Enhanced input/ output (EIO) slot IEEE 1284Bcompliant parallel connection port (not available on network-connected models) 64 MB total RAM IEEE 1284Bcompliant parallel connection port





Prints up to 35 pages-perminute (ppm) on letter-sized media, and up to 33 ppm on A4sized media 80 MB total RAM 100-sheet multipurpose tray (tray 1), 500sheet input tray (tray 2), and 250sheet output bin Hi-Speed universal serial bus (USB) 2.0 port One open dual inline memory module (DIMM) slot Enhanced input/ output (EIO) slot HP Jetdirect fullfeatured embedded print server to connect to 10Base-T/ 100Base-TX networks

HP LaserJet P3005n, plus: Automatic twosided printing accessory

HP LaserJet P3005n, plus: Automatic twosided printing accessory 500-sheet input tray (tray 3)



















2

Chapter 1 Device information

ENWW

Features
Feature Performance User interface Description Printer drivers Resolution Storage features Fonts Accessories Connectivity Environmental features 400 MHz processor Control-panel help HP Easy Printer Care software (a Web-based status and problem-solving tool) Windows® and Macintosh printer drivers Embedded Web server to access support and order supplies (for network-connected models only) HP PCL 5 HP PCL 6 HP postscript level 3 emulation FastRes 1200--produces 1200-dots-per-inch (dpi) print quality for fast, high-quality printing of business text and graphics ProRes 1200--produces 1200-dpi printing for the best quality in line art and graphic images Fonts, forms, and other macros Job retention 93 internal scalable fonts available for PCL and HP postscript 3 emulation 80 device-matching screen fonts in TrueType format available with the software solution Additional fonts can be added through the host USB ports Optional 500-sheet input tray (tray 3) (available for all models except HP LaserJet P3005x) Automatic duplexer (available only on models HP LaserJet P3005d, HP LaserJet P3005dn, and HP LaserJet P3005x) 144-pin dual inline memory module (DIMM) Hi-Speed USB 2.0 connection HP Jetdirect full-featured embedded print server (available only on models HP LaserJet P3005n, HP LaserJet P3005dn, and HP LaserJet P3005x) IEEE-1284 compliant parallel port (available only on models HP LaserJet P3005 and HP LaserJet P3005d) HP Web Jetadmin software Enhanced input/output (EIO) slot Sleep mode ENERGY STAR® qualified

ENWW

Features

3

Feature Supplies

Description The supplies status page contains information about toner level, page count, and estimated pages remaining. The device checks for an authentic HP print cartridge at installation. Internet-enabled supply-ordering capabilities (using HP Easy Printer Care software) The online user guide is compatible with text screen-readers. The print cartridge can be installed and removed by using one hand. All doors and covers can be opened by using one hand. Media can be loaded in tray 1 by using one hand.

Accessibility



4

Chapter 1 Device information

ENWW

Walkaround
Device parts
Before using the device, familiarize yourself with the parts of the device.

1 2 5 3 4 7
1 2 3 4 5 6 7 Top output bin Latch to open the cartridge door (provides access to the print cartridge) Tray 1 (pull to open) Tray 2 Control panel Right-side cover (provides access to DIMMs) On/off switch

6

2

1
1 2 Interface ports (see Interface ports on page 6) Rear output bin (pull to open)

The model number and serial numbers are listed on the identification labels located on the back of the device. The model number is alphanumeric, such as Q7812A for an HP LaserJet P3005 printer. The

ENWW

Walkaround

5

serial number contains information about the country/region of origin, the device version, production code, and the production number of the device. The following is a sample identification label.
country/region of origin printer version model number production number production code

HEWLETT-PACKARD 11311 CHINDEN BLVD. BOISE, IDAHO 83714 USA

50/60 Hz. 115V Model No.: Q3668

CNBR212347 CNBR212347

CNBR212347 CNBR212347

Serial No.: JPBB605112

Assembled in U.S.A. printer engine made in Japan

Figure 1-1 Model and serial numbers
Model name HP LaserJet P3005 HP LaserJet P3005d HP LaserJet P3005n HP LaserJet P3005dn HP LaserJet P3005x Model number Q7812A Q7813A Q7814A Q7815A Q7816A

Interface ports
The device has one EIO slot and three ports for connecting to a computer or a network.

1 2 3

EIO

4

1 2 3 4

Type B Hi-Speed USB 2.0 connection RJ-45 network connection (available only on models P3005n, P3005dn, and P3005x) IEEE 1284B-compliant parallel connection (available only on models P3005 and P3005d) EIO slot

6

Chapter 1 Device information

ENWW

Control-panel layout
The control-panel display gives you complete, timely information about the device and print jobs. Menus provide access to device functions and detailed information. The message and prompt areas of the display alert you to the state of the device and tell you how to respond.

1

11

2

?

10

9 8
Menu Stop

3
Ready Data Attention

7

4

5

6

Number 1 2 3 4

Button or light Control-panel display

Function Shows status information, menus, help information, and error messages. Provides information about the message on the control-panel display. Opens and closes the menus. On: The device is online and ready to accept data to print. Off: The device cannot accept data because it is offline (paused) or has experienced an error. Blinking: The device is going offline. The device stops processing the current print job and expels all of the active pages from the paper path. On: The device has data to print, but is waiting to receive all of the data. Off: The device has no data to print. Blinking: The device is processing or printing the data. On: The device has experienced a problem. Make note of the message on the control-panel display, and then turn the device off and on. See Control-panel messages on page 131 for help in resolving problems. Off: The device is functioning without error. Blinking: Action is required. See the control-panel display. Cancels the current print job and clears the pages from the device. The time this takes depends on the size of the print job. (Press the button

Help ( ) button Menu button Ready light

5

Data light



6

Attention light



7 Stop button

ENWW

Walkaround

7

Number

Button or light

Function only once.) Also clears continuable errors that are associated with the canceled job. NOTE The control-panel lights cycle while the print job is cleared from both the device and the computer, and then the device returns to the Ready state.

8 9

Down ( Back (

) button ) button



Navigates to the next item in the list, or decreases the value of numeric items Backs up one level in the menu tree or backs up one numeric entry Closes menus if held down for more than 1 second Clears an error condition when the condition is clearable Saves the selected value for an item Performs the action that is associated with the item that is highlighted on the control-panel display Navigates to the previous item in the list, or increases the value of numeric items

10

Select (

) button



11

Up (

) button



8

Chapter 1 Device information

ENWW

Device software
The printing-system software is included with the device. See the getting started guide for installation instructions. The printing system includes software for end users and network administrators, and printer drivers for access to the device features and communication with the computer. NOTE For a list of printer drivers and updated HP device software, go to www.hp.com/go/ LJP3005_software.

Minimum system requirements
In order to install and use the device software, your computer must meet the following minimum requirements: Windows requirements Pentium II (233 MHz) processor 64 MB of RAM 35 MB of disk space SVGA 8