Text preview for : RTLNA01.pdf part of Rficsolutions Inc. RTLNA01 The RTLNA01 is 2 to 4 GHz; Low Noise Amplifier IP Block .The device is designed for 802.11 b/g and Cellular system. The LNA has input and output matching off-chip which will provide the flexibility to tune the LNA for low noise figure. The LNA is biased single 3.0 V supply and consumes only 7.5mA current. The simulated noise figure is as low as 1.5 dB at 2 GHz



Back to : RTLNA01.pdf | Home

RFIC Solutions Inc.
Low Noise Amplifier
Description .

Preliminary Datasheet RTLNA01

Functional Diagram

.

The RTLNA01 is 2 to 4 GHz; Low Noise Amplifier IP Block .The device is designed for 802.11 b/g and Cellular system. The LNA has input and output matching off-chip which will provide the flexibility to tune the LNA for low noise figure. The LNA is biased single 3.0 V supply and consumes only 7.5mA current. The simulated noise figure is as low as 1.5 dB at 2 GHz

Applications. · · · · IEEE 802.11 b/g WLAN Cellular System WiFi Systems ISM Band Systems

.

Key Features. · · · Low Current Low noise Figure of 1.45dB Low Cost

.

Electrical Specifications.

.

Conditions: Vcc = 1.8 V & TA=25 0C

Parameter Frequency Range Gain Input Return Loss Output Return Loss Noise Figure Supply voltage Supply Current

Minimum 2 10.2

Typical

Maximum 4 11.8

Units GHz dB dB dB dB V mA

7 10 1.45 1.8 7.5 1.75

May 02, 2007

www.rficsolutions.com

Page 1 of 2

RFIC Solutions Inc. Proprietary Information
Data subject to change without Notice

RFIC Solutions Inc.
Low Noise Amplifier
Simulated results. .

Preliminary Datasheet RTLNA01

Gain Vs Freq

Noise Figure Vs Freq

Input Return Loss Vs Freq

Output Return Loss Vs Freq

May 02, 2007

www.rficsolutions.com

Page 2 of 2

RFIC Solutions Inc. Proprietary Information
Data subject to change without Notice