Text preview for : 987685642.pdf part of Sony DSC-W5/W7/W15/W17 DSC-W5/W7/W15/W17 service manual L1/L2/L3
Back to : Sony DSC-W5.part1.rar | Home
DSC-W5/W7/W15/W17
SERVICE MANUAL
Ver. 1.1 2007.09
Revision History LEVEL
1
DSC-W5/W7
US Model Canadian Model Argentine Model Brazilian Model Japanese Model
DSC-W5/W7/W15/W17
Revised-1
Replace the previously issued SERVICE MANUAL 9-876-856-41 with this manual.
AEP Model UK Model E Model Australian Model Hong Kong Model Korea Model Tourist Model
DSC-W5/W7/W15
Chinese Model
Photo: DSC-W5/Silver
Link
SPECIFICATIONS SELF DIAGNOSIS FUNCTION MAIN PARTS
· INSTRUCTION MANUAL is shown at the end of this document.
Method for Copying the Data in Internal Memory
The data can be copied by the operations on the Setup screen.
Copy
Copies all images in the internal memory to a "Memory Stick".
OK Cancel
See the following procedure. Cancels the copying.
1 Insert a "Memory Stick" having 32 MB or larger capacity. 2 Select [OK] with v on the control button, then press z. The message "All data in internal memory will be copied Ready?" appears. 3 Select [OK] with v, then z. Copying starts.
Copying 102_COPY
· Use fully charged Nickel-Metal Hydride batteries or the AC Adaptor (not supplied). If you attempt to copy image files using batteries with little remaining charge, the batteries may run out, causing copying to fail or possibly corrupting the data. · You cannot copy individual images. · The original images in the internal memory are retained even after copying. To delete the contents of the internal memory, remove the "Memory Stick" after copying, then execute the [Format] command in Internal Memory Tool. · You cannot select a folder copied on a "Memory Stick". ·A (Print order) mark added to an image is deleted when you copy data.
DIGITAL STILL CAMERA
DSC-W5/W7/W15/W17
9-876-856-42
Sony EMCS Co.
2007I0500-1 © 2007.9 Published by Kohda TEC
SPECIFICATIONS
Camera
[System]
Image device DSC-W7/W17: 9.11 mm (1/1.8 type) color CCD, Primary color filter DSC-W5/W15: 9.04 mm (1/1.8 type) color CCD, Primary color filter
[Input and Output connectors]
A/V OUT (MONO) jack (Monaural) Minijack Video: 1 Vp-p, 75 , unbalanced, sync negative Audio: 327 mV (at a 47 k load) Output impedance 2.2 k USB jack mini-B Hi-Speed USB (USB 2.0 compliant) USB communication
BC-CS2A/CS2B Ni-MH battery charger
Power requirements AC 100 to 240 V, 50/60 Hz, 3W Output voltage AA: DC 1.4V 400 mA × 2 AAA: DC 1.4 V 160 mA × 2
Total pixel number of camera DSC-W7/W17: Approx. 7 410 000 pixels DSC-W5/W15: Approx. 5 255 000 pixels Effective pixel number of camera DSC-W7/W17: Approx. 7 201 000 pixels DSC-W5/W15: Approx. 5 090 000 pixels Lens Carl Zeiss Vario-Tessar 3 zoom lens f = 7.9 - 23.7 mm (38 - 114 mm when converted to a 35 mm still camera) F2.8 - 5.2
Operating temperature 0°C to +40°C (+32°F to +104°F) Storage temperature -20°C to +60°C (-4°F to +140°F) Dimensions Approx. 71×30×91 mm (2 7/8×1 3/16×3 5/8 inches) (W/H/D) Approx. 90 g (3 oz)
[LCD screen]
LCD panel 6.2 cm (2.5 type) TFT drive Total number of dots 115 200 (480×240) dots
Mass
[Power, general]
Power HR 15/51:HR6 (size AA) Nickel-Metal Hydride batteries (2), 2.4 V R6 (size AA) Alkaline batteries (2, not supplied), 3 V AC-LS5K AC Acaptor (not supplied), 4.2 V
Design and specifications are subject to change without notice.
Exposure control Automatic exposure, Manual exposure, Scene Selection (7 modes) White balance Automatic, Daylight, Cloudy, Fluorescent, Incandescent, Flash
Power consumption (during shooting with the LCD screen on) DSC-W7/W17: 1.2 W DSC-W5/W15: 1.1 W Operating temperature 0°C to +40°C (+32°F to +104°F) Storage temperature -20°C to +60°C (-4°F to +140°F) Dimensions 91×60×37.1 mm (3 5/8×2 3/8×1 1/2 inches) (W/H/D, excluding maximum protrusions) Approx. 253 g (8.9 oz) (including two batterries and wrist strap) Electret condenser microphone Dynamic speaker Compatible
File format (DCF compliant) Still images: Exif Ver. 2.2 JPEG compliant, DPOF compatible Movies: MPEG1 compliant (Monaural) Recording media Internal memory 32 MB Memor y Stick Flash Recommended distance (ISO set to Auto): 0.2 m to 4.5 m (7 7/8 inches to 14 feet 9 1/4 inches) (W)/0.3 m to 2.5 m (11 7/8 inches to 8 feet 2 1/2 inches) (T)
Mass
Microphone Speaker Exif Print
PRINT Image Matching III Compatible PictBridge Compatible
DSC-W5/W7/W15/W17 --2--
Table for differences of function
Model Destination CCD imager Total pixel (Effective pixel) Note: DSC-W5 US, CND, AEP, UK, E, AUS, HK, CH, KR, AR, BR, J, JE 5 255 000 pixels (5 090 000 pixels) DSC-W7 US, CND, AEP, UK, E, AUS, HK, CH, KR, AR, BR, J, JE 7 410 000 pixels (7 201 000pixels) DSC-W15 AEP, UK, E, AUS, HK, CH, KR, JE 5 255 000 pixels (5 090 000 pixels) DSC-W17 AEP, UK E, AUS, HK, KR, JE 7 410 000 pixels (7 201 000pixels)
DSC-W15/W17 are the same as DSC-W5/W7 except accessories and packing materials.
· Abbreviation AR : Argentine model AUS : Australian model BR : Brazilian model CH : Chinese model CND : Canadian model HK : Hong Kong model J : Japanese model JE : Tourist model KR : Korea model
SAFETY-RELATED COMPONENT WARNING!! COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT À LA SÉCURITÉ! LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following safety checks before releasing the set to the customer. 1. Check the area of your repair for unsoldered or poorly-soldered connections. Check the entire board surface for solder splashes and bridges. Check the interboard wiring to ensure that no wires are "pinched" or contact high-wattage resistors. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out to the customer and recommend their replacement. Look for parts which, through functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement. 5. 6. Check the B+ voltage to see it is at the values specified. Flexible Circuit Board Repairing · Keep the temperature of the soldering iron around 270°C during repairing. · Do not touch the soldering iron on the same conductor of the circuit board (within 3 times). · Be careful not to apply force on the conductor when soldering or unsoldering.
2. 3.
4.
DSC-W5/W7/W15/W17 --3--
SELF-DIAGNOSIS FUNCTION
[Description on Self-diagnosis Display]
Self-diagnosis display · C: ss: ss You can reverse the camera malfunction yourself. (However, contact your Sony dealer or local authorized Sony service facility when you cannot recover from the camera malfunction.) · E: ss: ss Contact your Sony dealer or local authorized Sony service facility. Display Code C:32:ss Countermeasure Turn the power off and on again. Format the "Memory Stick" or internal memory. Insert a new "Memory Stick". Turn the power off and on again. E:61:ss E:91:ss E:92:ss Checking of lens drive circuit. Checking of flash unit or replacement of flash unit. Insert batteries correctly. Cause Trouble with hardware. "Memory Stick" or internal memory is unformatted. "Memory Stick" is broken. Trouble with internal memory. When failed in the focus and zoom initialization. Abnormality when flash is being charged. Batteries are not inserted correctly. -- Caution Display During Error SYSTEM ERROR FORMAT ERROR MEMORY STICK ERROR INTERNAL MEMORY ERROR
C:13:ss
DSC-W5/W7/W15/W17 --4--
Ver. 1.1 2007.09
The changed portions from Ver. 1.0 are shown in blue.
1. MAIN PARTS
Note:
· Items marked "*" are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. · The parts numbers of such as a cabinet are also appeared in this section. Refer to the parts number mentioned below the name of parts to order. · Abbreviation HK : Hong Kong model KR : Korean model AUS: Australian model J : Japanese model CH : Chinese model JE : Tourist model CND: Canadian model
The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifiés par une marque 0 sont critiquens pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.
Checking supplied accessories.
Note: This item is supplied with the unit as an accessory, but is not prepared as a service part.
Battery charger (BC-CS2A/CS2B) (1) 0 1-477-814-41 (US, CND, JE, J) 0 1-477-814-51 (AEP, UK, E, AR, HK, AUS) 0 1-477-814-61 (KR, CH)
Battery case (1) 3-074-757-01
A/V connecting cable (1) 1-824-519-11
USB cable (1) 1-827-038-11
Other accessories
2-586-553-01 INSTRUCTION (READ THIS FIRST) (JAPANESE) (J) 2-586-553-11 INSTRUCTION (READ THIS FIRST) (ENGLISH) (EXCEPT AR, KR, CH, J) 2-586-553-21 INSTRUCTION (READ THIS FIRST) (FRENCH, ITALIAN) (AEP, CND) 2-586-553-31 INSTRUCTION (READ THIS FIRST) (SPANISH, PORTUGUESE) (AEP, E, AR, JE) 2-586-553-41 INSTRUCTION (READ THIS FIRST) (GERMAN, DUTCH) (AEP) 2-586-553-51 INSTRUCTION (READ THIS FIRST) (TRADITIONAL CHINESE, SIMPLIFIED CHINESE) (E, HK, CH, JE) 2-586-553-61 INSTRUCTION (READ THIS FIRST) (RUSSIAN, SWEDISH) (AEP) 2-586-553-71 INSTRUCTION (READ THIS FIRST) (ARABIC, PERSIAN) (E) 2-586-553-81 INSTRUCTION (READ THIS FIRST) (KOREAN) (KR, JE) 2-586-553-91 INSTRUCTION (READ THIS FIRST) (POLISH, CZECH) (AEP) 2-586-555-11 INSTRUCTION (READ THIS FIRST) (HUNGARIAN, SLOVAK) (AEP) 2-586-561-01 INSTRUCTION (USER'S GUIDE) (JAPANESE) (J) 2-586-561-11 INSTRUCTION (USER'S GUIDE) (ENGLISH) (EXCEPT AR, KR, CH, J) 2-586-561-21 INSTRUCTION (USER'S GUIDE) (FRENCH, ITALIAN) (AEP, CND) 2-586-561-31 INSTRUCTION (USER'S GUIDE) (SPANISH, PORTUGUESE) (AEP, E, AR, JE) 2-586-561-41 INSTRUCTION (USER'S GUIDE) (GERMAN, DUTCH) (AEP) 2-586-561-51 INSTRUCTION (USER'S GUIDE) (TRADITIONAL CHINESE, SIMPLIFIED CHINESE) (E, HK, CH, JE) 2-586-561-61 INSTRUCTION (USER'S GUIDE) (RUSSIAN, SWEDISH) (AEP) 2-586-561-71 INSTRUCTION (USER'S GUIDE) (ARABIC, PERSIAN) (E) 2-586-561-81 INSTRUCTION (USER'S GUIDE) (KOREAN) (KR, JE) 2-586-561-91 INSTRUCTION (USER'S GUIDE) (POLISH, CZECH) (AEP) 2-586-563-11 INSTRUCTION (USER`S GUIDE) (HUNGARIAN, SLOVAK) (AEP)
HR6 (size AA) Ni-MH batteries (2) (Note) Power cord (1) 0 1-823-946-12 (AEP, E) 0 1-782-476-51 (CH) 0 1-783-374-11 (UK, HK) 0 1-783-952-21 (AR) 0 1-790-107-42 (US, CND) 0 1-790-732-12 (JE, J) 0 1-776-985-12 (KR) 0 1-827-945-11 (AUS)
Wrist strap (1) 2-050-981-01 (Silver) 2-050-981-11 (Black)
Conversion 2P adaptor (1) 0 1-569-008-21 (E)
Conversion 2P adaptor (1) 0 1-569-007-12 (JE)
Soft carrying case (W15/W17 only) (1) 2-055-904-01
CD-ROM (Cyber-shot application software) (1) 2-583-852-31 (US, J) 2-583-853-01 (EXCEPT US, J)
DSC-W5/W7/W15/W17 --5--
2-586-561-11(1)
Digital Still Camera
Enjoying the camera
User's Guide/ Troubleshooting
Operating Instructions
Before operating the unit, please read this manual and "Read This First" (separate volume) thoroughly, and retain it for future reference.
Using the menu
Using the Setup screen
Owner's Record
The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. DSC-W5/W7/W15/W17 Serial No. ___________________________
Using your computer
Printing still images
DSC-W5/W7/ W15/W17
Connecting your camera to your TV
Troubleshooting
Others
"Read This First" (separate volume)
Additional information on this product and answers to frequently asked questions can be found at our Customer Support Website.
Explains the set-up and basic operations for shooting/playback with your camera.
Index
Printed on 100% recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink.
Printed in Japan
© 2005 Sony Corporation
WARNING
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
If you have any questions about this product, you may call: Sony Customer Information Services Center 1-800-222-SONY (7669) The number below is for the FCC related matters only.
For Customers in the U.S.A.
Regulatory Information
Declaration of Conformity Trade Name: SONY Model No.: DSC-W5 Responsible Party: Sony Electronics Inc. Address: 16450 W. Bernardo Dr, San Diego, CA 92127U.S.A. Telephone No.: 858-942-2230 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Declaration of Conformity Trade Name: SONY Model No.: DSC-W7 Responsible Party: Sony Electronics Inc. Address: 16450 W. Bernardo Dr, San Diego, CA 92127U.S.A. Telephone No.: 858-942-2230 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
CAUTION
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
2
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The supplied interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.
Notice for customers in the United Kingdom
A moulded plug complying with BS 1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the supplied one and approved by ASTA or BSI to BS 1362, (i.e., marked with an or mark) must be used. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.
For Customers in Europe
This product has been tested and found compliant with the limits set out in the EMC Directive for using connection cables shorter than 3 meters (9.8 feet).
Attention
The electromagnetic fields at the specific frequencies may influence the picture and sound of this camera.
Notice
If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the communication cable (USB, etc.) again.
For Customers in the U.S.A. and Canada
RECYCLING NICKEL METAL HYDRIDE BATTERIES
Nickel Metal Hydride batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you. For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.rbrc.org/ Caution: Do not handle damaged or leaking Nickel Metal Hydride batteries.
3
Notes on using your camera
Types of "Memory Stick" that can be used (not supplied)
The IC recording medium used by this camera is a "Memory Stick". There are two types of "Memory Stick".
· "Memory Stick": you can use a "Memory Stick" with your camera.
No compensation for contents of the recording
· The contents of the recording cannot be compensated for if recording or playback is not possible due to a malfunction of your camera or recording media, etc.
Back up recommendation
· To avoid the potential risk of data loss, always copy (back up) data to other medium.
Back up of the internal memory
· "Memory Stick Duo": you can use a "Memory Stick Duo" by inserting it into a Memory Stick Duo Adaptor. · If you turn off the power by opening the battery/ "Memory Stick" cover, etc. during the access lamp is lit, the data in the internal memory may be corrupted. Be sure to back up the data to avoid the potential risk of data loss. See page 23 on how to back up the data.
Memory Stick Duo Adaptor
· For details on "Memory Stick", see page 89.
Notes on recording/playback
· This camera is neither dust-proof, nor splashproof, nor water-proof. Read "Precautions" (page 93) before operating the camera. · Before you record one-time events, make a trial recording to make sure that the camera is working correctly. · Be careful not to get the camera wet. Water entering the inside of the camera may cause malfunctions which in some cases may not be repairable. · Do not aim the camera at the sun or other bright light. This may cause irrecoverable damage to your eyes. Or it may cause the malfunction of your camera. · Do not use the camera near a location that generates strong radio waves or emits radiation. The camera may not be able to record or play back properly. · Using the camera in sandy or dusty locations may cause malfunctions. · If moisture condensation occurs, remove it before using the camera (page 93). · Do not shake or strike the camera. In addition to malfunctions and an inability to record images, this may render the recording medium unusable, or cause image data breakdown, damage or loss. · Clean the flash surface before use. The heat of flash emission may cause dirt on the flash surface to become discolored or to stick to the flash surface, resulting in insufficient light emission.
Notes on the Nickel-Metal Hydride battery
· Charge both of the supplied Ni-MH batteries before using the camera for the first time. (t step 1 in"Read This First") · The batteries can be charged even if they are not completely discharged. Also, even if batteries are not fully charged, you can use the partially charged capacity of the batteries as is. · If you do not intend to use the batteries for a long time, use up the existing charge and remove them from your camera, then store them in a cool, dry place. This is to maintain the batteries' functions (page 91). · For details on the usable batteries, see page 91.
Carl Zeiss lens
This camera is equipped with a Carl Zeiss lens which is capable of reproducing sharp images with excellent contrast. The lens for this camera has been produced under a quality assurance system certified by Carl Zeiss in accordance with the quality standards of Carl Zeiss in Germany.
4
Notes on the LCD screen, LCD finder (for models with an LCD finder) and lens
· The LCD screen and the LCD finder are manufactured using extremely high-precision technology so over 99.99% of the pixels are operational for effective use. However, there may be some tiny black points and/or bright points (white, red, blue, or green in color) that constantly appear on the LCD screen and the LCD finder. These points are normal in the manufacturing process and do not affect the recording in any way. · Exposing the LCD screen, the finder, or the lens to direct sunlight for long periods may cause malfunctions. Be careful when placing the camera near a window or outdoors. · Do not press against the LCD screen. The screen may be discolored and that may cause a malfunction. · Images may trail across on the LCD screen in a cold location. This is not a malfunction. · This camera is equipped with a power zoom lens. Be careful not to bump the lens, and be careful not to apply force to it.
On image data compatibility
· This camera conforms with DCF (Design rule for Camera File system universal standard) established by JEITA (Japan Electronics and Information Technology Industries Association). · Playback of images recorded with your camera on other equipment and playback of images recorded or edited with other equipment on your camera are not guaranteed.
Warning on copyright
Television programs, films, videotapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provisions of the copyright laws.
The pictures used in this manual
The photographs used as examples of pictures in this manual are reproduced images, and are not actual images shot using this camera.
5
For full use of the digital still camera
Prepare the camera and shoot in auto adjustment mode
"Read This First" (separate volume)
1 Prepare the battery 2 Turn the camera on/set the clock 3 Insert a "Memory Stick" (not supplied) 4 Select the image size for use 5 Shoot images easily (Auto adjustment mode) Shoot still images (Scene Selection) 6 View images/Delete images
Get more friendly with your camera
This manual
· Shoot with your favorite settings (Program auto shooting/
Manual shooting) t page 25
· Enjoy various shooting/playback using the menu t page 28 · Change the default settings t page 44
Connect your camera to a PC or a printer
This manual
· Copy your images to a computer and enjoy editing them in
various ways t page 55
· Print images by connecting your camera directly to a printer
(PictBridge compliant printers only) t page 68
6
Table of contents
Notes on using your camera .....................................................................4
Enjoying the camera
Basic techniques for better images .........................................................10
Focus Focusing on a subject successfully................................................... 10 Exposure Adjusting the light intensity .......................................................... 11 Color On the effects of lighting..................................................................... 12 Quality On "image quality" and "image size" ............................................... 13
Identifying parts.......................................................................................15 Indicators on the screen ..........................................................................17 Changing the screen display ...................................................................21 Number of still images and recording time of movies..............................22 When you do not have a "Memory Stick" (Recording with the internal memory) ..................................................................................................23 Battery life and number of images that can be recorded/viewed ............24 Using the mode dial.................................................................................25
Using the menu
Using menu items ..............................................................................28 Menu items ..........................................................................................29
Shooting menu ........................................................................................30
(EV) 9 (Focus) (Metering Mode) WB (White Bal) ISO (P.Quality) Mode (REC Mode) M (Interval) (Flash Level) PFX (P.Effect) (Saturation) (Contrast) (Sharpness) (Setup)
7
Viewing menu ......................................................................................... 37
(Folder) - (Protect) DPOF (Print) (Slide) (Resize) (Rotate) (Divide) (Setup) Trimming
Using the Setup screen
Using Setup items .............................................................................. 44
1
Camera 1 ........................................................................................... 45
AF Mode Digital Zoom Date/Time Red Eye Reduction AF Illuminator Auto Review
2
Camera 2 ........................................................................................... 48
Enlarged Icon
Internal Memory Tool ........................................................................ 49
Format
Memory Stick Tool............................................................................. 50
Format Create REC. Folder Change REC. Folder Copy
1
Setup 1............................................................................................... 52
LCD Backlight Beep Language Initialize
2
Setup 2............................................................................................... 53
File Number USB Connect Video Out Clock Set
8
Using your computer
Enjoying your Windows computer ...........................................................55 Copying images to your computer...........................................................57 Viewing image files stored on a computer with your camera (using a "Memory Stick") .......................................................................................63 Using the supplied software ....................................................................64 Using your Macintosh computer..............................................................66
Printing still images
How to print still images ..........................................................................68 Printing images directly using a PictBridge compliant printer .................69 Printing at a shop ....................................................................................72
Connecting your camera to your TV
Viewing images on a TV screen ..............................................................74
Troubleshooting
Troubleshooting .......................................................................................76 Warning indicators and messages ..........................................................86
Others
On the "Memory Stick" ............................................................................89 On the battery charger and the batteries ................................................91 Precautions .............................................................................................93 Specifications ..........................................................................................94
Index ......................................................................................................96
9
Enjoying the camera
Basic techniques for better images
Focus Exposure Color Quality This section describes the basics so you can enjoy your camera. It tells you how to use various camera functions such as the mode dial (page 25), the menus (page 28), and so on.
Focus
Focusing on a subject successfully
When you press the shutter button halfway down, the camera adjusts the focus automatically (Auto Focus). Remember to press the shutter button only halfway down.
Press fully down straight away Press halfway down, then
Flashing,lit/beeps
VGA FINE 101
Press fully down
96
S AF
30 F3.5
To shoot a still image difficult to focus on t [Focus] (page 31) If the image looks blurred even after focusing, it may be because of camera shake. "Hints for preventing blur" (below).
t
See
Hints for preventing blur
Hold the camera steadily, keeping your arms at your side. Also, you can stabilize the camera by leaning against a tree or a building beside you. Using a tripod, and using the flash in dark places are also recommended.
10
Exposure Adjusting the light intensity
You can create various images by adjusting the exposure and the ISO sensitivity. Exposure is the amount of light that the camera will receive when you release the shutter.
Enjoying the camera
Exposure:
Shutter speed = Length of time the camera receives light Aperture = Size of the opening allowing light to pass through ISO = Recording sensitivity
Overexposure = too much light Whitish image Correct exposure
The exposure is automatically set to the proper value in the auto adjustment mode. However, you can adjust it manually using the functions below. [Manual exposure]: Allows you to adjust the shutter speed and aperture value manually. t page 26 [EV]: Allows you to adjust the exposure that has been determined by the camera. t page 30 [Metering Mode]: Allows you to change the part of the subject to be measured to determine the exposure. t page 32
Underexposure = too little light Darker image
Characteristics of "shutter speed"
Characteristics of "aperture" (F value)
Faster Moving objects appear stopped.
Slower Moving objects appear to flow.
Open In-focus range narrows, both backward and forward.
Close In-focus range widens, both backward and forward.
11
Adjusting the ISO sensitivity
ISO is unit of measurement (sensitivity), estimating how much light an image pickup device (equivalent to photo films) receives. Even when the exposure is the same, images differ depending on the ISO sensitivity. [ISO] adjusts the sensitivity t page 33
High ISO sensitivity Records a bright image even when shooting in a dark location. However, the image tends to become noisy.
Low ISO sensitivity Records a smoother image. However, the image may become darker.
Color
On the effects of lighting
The apparent color of the subject is affected by the lighting conditions.
Example: The color of an image affected by light sources
Weather/lighting
Daylight
Cloudy
Fluorescent
Incandescent
Characteristics of light
White (standard)
Bluish
Blue-tinged
Reddish
The color tones are adjusted automatically in the auto adjustment mode. However, you can adjust color tones manually with [White Bal] (page 33).
12
Quality
On "image quality" and "image size"
Enjoying the camera
A digital image is made up of a collection of small dots called pixels. If it contains a large number of pixels, the picture becomes large, it takes up more memory, and the image is displayed in fine detail. "Image size" is shown by the number of pixels. Although you cannot see the differences on the screen of the camera, the fine detail and data processing time differ when the image is printed or displayed on a computer screen.
Description of the pixels and the image size 1 Image size: 7M (DSC-W7/W17 only) 3072 3,072 pixels×2,304 pixels = 7,077,888 pixels
2592 640 2304 1944 480
2 Image size: 5M 2592 pixels×1944 pixels = 5,038,848 pixels 3 Image size: VGA(E-Mail) 640 pixels×480 pixels = 307,200 pixels
Pixels
13
Selecting the image size for use (t step 4 in "Read This First")
Pixel
Many (Fine image quality and large file size) Few (Rough image quality but small file size) Example: Printing in up to A3 size
Example: An attached image to be sent by e-mail
Image size
Usage guidelines
7M (3072×2304) (DSCW7/W17 only: the default setting) 3:2 (3072×2048) (DSCW7/W17 only)* 5M (2592×1944) (DSCW5/W15: the dafault setting) 3:2 (2592×1728) (DSCW5/W15 only)* 3M (2048×1536) 1M (1280×960) VGA(E-Mail) (640×480)
Larger
For printing high density images in A3 or A4 size
For printing high density images in A4 or A5 size
Smaller
For printing in postcard size For recording a large number of images For attaching images to e-mail or creating home pages
* Images are recorded in the same 3:2 aspect ratio as photograph printing paper or postcards, etc.
Selecting the image quality (compression ratio) in combination (page 33)
You can select the compression ratio when digital images are saved. When you select a high compression ratio, the image lacks the fineness of detail, but has a smaller file size.
14
Identifying parts
See the pages in parentheses for details of operation.
1 2 9 3 q; 4 5 6 qs 7 8 qa
Enjoying the camera
A Shutter button (t step 5 in "Read This First") B Mode dial (25) C Microphone D Self-timer lamp (t step 5 in "Read This First")/AF illuminator (47) E Flash (t step 5 in "Read This First") F Lens G POWER lamp (t step 2 in "Read This First") H POWER button (t step 2 in "Read This First") I Jack cover J A/V OUT (MONO) jack (74) K (USB) jack (58) L Finder window
qd qf qg qh
A AE/AF lock lamp/self-timer lamp (green) (t step 5 in "Read This First") B /Record lamp (orange) (t step 5 in "Read This First")
C Finder (t step 5 in "Read This First") D LCD screen E G (Display/LCD on/off) button (21) (Image Size/Delete) button (t step 4 and 6 in "Read This First") Menu on: v/V/b/B/z (t step 2 in "Read This First") Menu off: / / / "Read This First") (t step 5 in F MENU button (28)
H Control button
Mode dial "M": Shutter speed/aperture value (26)
15
I For shooting: Zoom (W/T) button (t step 5 in "Read This First") For viewing: / (Playback zoom) button/ (Index) button (t step 6 in "Read This First") J Hook for wrist strap (t "Read This First") K Access lamp (t step 4 in "Read This First" L AC Adaptor cord cover To use the AC-LS5K AC Adaptor (not supplied)
M Speaker (bottom) N Tripod receptacle (bottom)
· Use a tripod with a screw length of less than 5.5 mm (7/32 inch). You will be unable to firmly secure the camera to tripods having longer screws, and may damage the camera.
O Battery/"Memory Stick" cover (t step 1 and 3 in "Read This First") P OPEN button (bottom) (t step 1 in "Read This First")
Do not pinch the cord when you close the cover.
16
Indicators on the screen
See the pages in parentheses for details of operation. A
Display Indication
When shooting still images
z
M
Battery remaining (t step 1 in "Read This First") Enjoying the camera AE/AF lock (t step 5 in "Read This First") Recording mode (25, 34) White balance (33) Standby/Recording a movie (t step 5 in "Read This First") Mode dial (Scene Selection) (t step 5 in "Read This First")
WB
STBY REC
When shooting movies
640
STD
101
Mode dial (25)
SL
STBY
00:00:00 [00:28:25] C:32:00
Flash mode (t step 5 in "Read This First") Red-eye reduction (46) Sharpness (36)
+
5 6
Saturation (36) Contrast (36) AF illuminator (47) Metering mode (32) Picture effect (36)
+2.0EV
ON
B
Display Indication
Manual exposure setup mode (26) Macro (t step 5 in "Read This First")
S AF M AF
AF mode (45) AF range finder frame indicator (31)
1.0m z Return
Focus preset distance (31) Manual exposure (26)
17
C
Display
7M
Display Indication
Indication
AF range finder frame (31)
(DSC-W7/ Image size (t step 4 in W17 only) "Read This First")
5M 3M
640
FINE
3:2 1M
640
STD
VGA
160
E
Image quality (33) Recording folder (50)
· This does not appear when using the internal memory. Display Indication
FINE STD
101
Histogram (21, 30)
Remaining internal memory capacity (22) Remaining "Memory Stick" capacity (22) 00:00:00 [00:28:05] 1/30" 400 Recording time [maximum recordable time] (22) "Multi Burst interval (35) Remaining number of recordable images (22) Self-timer (t step 5 in "Read This First") C:32:00 Self-diagnosis display (86) Date/Time (46) ISO number (33) 125 F3.5 +2.0EV
DPOF
NR slow shutter (26) Shutter speed (26) Aperture value (26) EV level value (30) Menu/Guide menu (28)
(not displayed on the screen on the previous page)
D
Display Indication
Vibration warning (10)
· Indicates vibration will prevent you from shooting clear images. Even if the vibration warning appears, you can still shoot images. However, we recommend holding the camera steadily and turning off the indicator to avoid the effects of vibration.
E +
Low battery warning (24) Spot metering cross hair (32)
18
When playing back still images
M
A
Display Indication
VGA
101
101
12/12
C:32:00
1.3
+2.0EV
7M 5M 1M
640
STD
Battery remaining (t step 1 in "Read This First") Enjoying the camera
3:2 VGA
160
500 F3.5
3M
640
FINE
Image size (t step 4 in "Read This First") Recording mode (25, 34) Playback (t step 6 in "Read This First") Volume (t step 6 in "Read This First")
M
BACK/NEXT VOLUME
N
When playing back movies
-
Protect (38) Print order (DPOF) mark (72) Change folder (37)
· This does not appear when using the internal memory.
1.3
Step 12/16
Zoom scaling (t step 6 in "Read This First") Frame by frame playback (34)
B
Display Indication
101-0012
Folder-file number (37) Playback bar (t step 6 in "Read This First")
C
Display Indication
PictBridge connecting (70)
101
Recording folder (50)
· This does not appear when using the internal memory.
101
Playback folder (37)
· This does not appear when using the internal memory.
Remaining internal memory capacity (22) Remaining "Memory Stick" capacity (22)
19
Display
Indication
8/8 12/12
Image number/Number of images recorded in selected folder Self-diagnosis display (86) Counter (22)
C:32:00 00:00:12
D
Display Indication
Do not disconnect the USB cable (71) +2.0EV EV level value (30) ISO number (33) Metering mode (32) Flash
WB
White balance (33) Shutter speed (26) Aperture value (26) Playback image (t step 6 in "Read This First")
500 F3.5
E
Display Indication
Histogram (21, 30)
· appears when histogram display is disabled.
2005 1 1
DPOF
Recording date/time of the playback image (46) Menu/Guide menu (28) Select images Adjust volume
BACK/ NEXT VOLUME
20
Changing the screen display
Each time you press the (Display/LCD on/off) button, the display changes as follows.
The flash strobes. The shutter speed is slow or high. · The histogram may not appear for images recorded using other cameras. · When you set the LCD screen to Off, the digital zoom does not function (page 45) and [AF Mode] is set to [Single] (page 45). When you select (flash)/ (self-timer)/ (macro), the image is displayed for about two seconds.
Enjoying the camera
Histogram on
VGA
96
S AF
Histogram display (page 30)
Indicators off
S AF
LCD screen off Indicators on
VGA
96
S AF
· When you set the histogram display to on, image information is displayed during playback. · The histogram does not appear: When shooting in the following situations The menu is displayed. Recording movies. During playback in the following situations The menu is displayed. In index mode. You are using playback zoom. You are rotating still images. Playback of movies. · A large difference in the histogram displayed when shooting and during playback may occur when:
21
Number of still images and recording time of movies
The tables show the approximate number of still images and the length of time for movies that can be recorded on a "Memory Stick" formatted with this camera. The values may vary depending on the shooting conditions. The number of images that can be recorded using this internal memory is equivalent to that of a 32 MB "Memory Stick".
The number of still images (The image quality is [Fine] on the upper line and [Standard] on the lower line.) (Images)
Capacity Size 32MB 64MB 128MB 256MB 512MB 1GB 2GB
7M (DSC-W7/ W17only) 3:2 (DSC-W7/ W17 only) 5M 3:2 (DSC-W5/ W15 only 3M 1M VGA(E-Mail)
9 18 9 18 12 23 12 23 20 37 50 93 196 491
18 36 18 36 25 48 25 48 41 74 101 187 394 985
37 73 37 73 51 96 51 96 82 149 202 376 790 1975
67 132 67 132 92 174 92 174 148 264 357 649 1428 3571
137 268 137 268 188 354 188 354 302 537 726 1320 2904 7261
279 548 279 548 384 723 384 723 617 1097 1482 2694 5928 14821
573 1125 573 1125 789 1482 789 1482 1266 2250 3038 5524 12154 30385
· · · ·
The number of images listed is for when [Mode] is set to [Normal]. The size of a single still image is 1M when [Mode] is set to [Multi Burst]. When the number of remaining shootable images is greater than 9,999, the ">9999" indicator appears. You can resize the images later ([Resize], (page 40)).
The recording time of movies (hour : minute : second)
Capacity Size 32MB 64MB 128MB 256MB 512MB 1GB 2GB
640(Fine) 640(Standard) 160
0:01:27 0:22:42
0:02:56 0:45:39
0:05:54 1:31:33
0:02:57 0:10:42 2:51:21
0:06:02 0:21:47 5:47:05
0:12:20 0:44:27 11:44:22
0:25:18 1:31:09 24:18:25
· Movies with the size set to [640(Fine)] can be only recorded on a "Memory Stick PRO". · For image size and image quality, see page 13. · When images recorded using earlier Sony models are played back on this camera, the display may differ from the actual image size.
22
When you do not have a "Memory Stick" (Recording with the internal memory)
The camera has 32 MB of internal memory. This memory is not removable. Even when there is no "Memory Stick" inserted in the camera, you can record images using this internal memory.
· Movies with the image size set to [640(Fine)] cannot be recorded using the internal memory.
When a "Memory Stick" (not supplied) is inserted
Enjoying the camera
B
[Recording]: Images are recorded on the "Memory Stick". [Playback]: Images on the "Memory Stick" are played back. [Menu, Setup, etc.]: Various functions can be performed on images on the "Memory Stick".
When there is no "Memory Stick" inserted
B
Internal memory
[Recording]: Images are recorded using the internal memory. [Playback]: Images stored in the internal memory are played back. [Menu, Setup, etc.]: Various functions can be performed on images in the internal memory.
On image data stored in the internal memory
We recommend that you copy (back up) data without fail using one of the following methods.
To copy (back up) data on a "Memory Stick"
Prepare a "Memory Stick" with a capacity of 32 MB or more, then perform the procedure explained in [Copy] (page 51).
To copy (back up) data on a hard disc of your computer
Perform the procedure on pages 57 to 61 without a "Memory Stick" inserted in the camera.
· You cannot move image data on a "Memory Stick" to the internal memory. · By connecting the camera and a computer with a USB cable, you can copy data stored in the internal memory to a computer, but you cannot copy data on a computer to the internal memory.
23
Battery life and number of images that can be recorded/viewed
The tables show the approximate number of images that can be recorded/viewed and the battery life when you shoot images in [Normal] mode with batteries at full capacity and at an ambient temperature of 25°C (77°F). The numbers of images that can be recorded or viewed take into account changing the "Memory Stick" as necessary. Note that the actual numbers may be less than those indicated depending on the conditions of use.
· The battery capacity decreases as the number of uses increases and also over time (page 91). · The number of images that can be recorded/ viewed and the battery life are decreased under the following conditions: The surrounding temperature is low The flash is used The camera has been turned on and off many times The zoom is used frequently [LCD Backlight] is set to [Bright] [AF Mode] is set to [Monitor] The battery power is low The zoom is switched alternately between the W and T ends The flash strobes once every two times The power turns on and off once every ten times · The measurement method is based on the CIPA standard. (CIPA: Camera & Imaging Products Association) · Number of shooting image does not change depending on the image size.
When viewing still images
Battery No. of images Battery life (min.)
DSC-W7/W17 Ni-MH (supplied) DSC-W5/W15 Ni-MH (supplied) Approx. 9200 Approx. 460 Approx. 8800 Approx. 440
When shooting still images
Battery LCD screen No. of images (Approx.) Battery life (min.)
· Viewing single images in order at about three second intervals
When shooting movies
Battery LCD screen On LCD screen Off
DSC-W7/W17 Ni-MH (supplied) Alkaline DSC-W5/W15 Ni-MH (supplied) Alkaline On Off On Off 420 580 80 150 210 290 40 75 On Off On Off 380 500 70 130 190 250 35 65
DSC-W7/W17 Ni-MH (supplied) DSC-W5/W15 Ni-MH (supplied) Approx. 220 min. Approx. 300 min. Approx. 180 min. Approx. 250 min.
· Shooting movies continuously with an image size of [160]
· Shooting in the following situations: (P.Quality) is set to [Fine] [AF Mode] is set to [Single] Shooting once every 30 seconds
24
Using the mode dial
Set the mode dial to the desired function.
Mode dial Enjoying the camera
Control button
t
: Shooting movies step 5 in "Read This First"
t
: Playback/Edit step 6 in "Read This First"
Still image shooting modes : Auto adjustment mode
Allows easy shooting with the settings adjusted automatically. t step 5 in "Read This First"
: Scene Selection mode
Allows you to shoot with preset settings according to the scene. t step 5 in "Read This First"
P:
Program auto shooting mode
Allows you to shoot with the exposure adjusted automatically (both the shutter speed and the aperture value). Also you can select various settings using the menu. (For details on the functions available t page 29)
M:
Manual exposure shooting mode
Allows you to shoot after adjusting the exposure manually (both the shutter speed and the aperture value) (page 26). Also, you can select the various settings using the menu. (For details on the functions available t page 29)
25
Scene Selection
For details t step 5 in "Read This First" For shooting an image appropriately according to the scene condition, a combination of functions is determined by the camera. ( : you can select the desired setting)
Macro Flash AF range finder Focus preset White Balance Burst/Multi Burst
--
SL
-- Auto/ WB Center AF / / 0.5m/1.0m 3.0m/7.0m -- --
--
--
/
To adjust the exposure manually
1 Press z on the control button when the mode dial is set to M.
The "Set" indicator at the lower left of the screen changes to "Return," and the camera enters the manual exposure setup mode.
2 Adjust the settings using the control button. b/B: Aperture (F value) v/V: Shutter speed
VGA
FINE
98
M
"Return" Aperture value
Return SAF 250 F2.8 0 EV
Shutter speed
When the zoom is set fully to the W side, you can select an aperture, F2.8 or F5.6. When the zoom is set fully to the T side, you can select an aperture, F5.2 or F10. You can select a shutter speed from 1/1000 to 30 seconds. The difference between the settings and proper exposure judged by the camera appears as an EV value (page 30) on the screen. 0EV indicates the value judged as the most suitable by the camera.
3 Shoot the image.
· To use the Quick Review, close-up (Macro), or self-timer function, or to change the flash mode, press z to cancel the manual exposure setup mode after step 1. (The "Return" indicator changes to "Set".) · The flash is set to (Forced flash) or (No flash).
26
· Shutter speeds of one second or longer are indicated by ["], for example, 1". · When you set the shutter speed slower, using a tripod is recommended to prevent the effects of vibration. · If you select shutter speeds of 1/6 second or slower, the NR slow shutter function activates automatically to reduce the picture noise and "NR" appears. · If you select slow shutter speeds, it takes time to process the data.
27
Enjoying the camera
Using the menu
Using menu items
v/V/b/B button Mode dial
z button
MENU button Control button
1 Turn on the power and set the mode dial.
Items available vary depending on the mode dial position.
2 Press MENU to display the menu. 3 Select the desired menu item with b/B
on the control button.
· If the desired item is invisible, keep pressing b/B until it appears on the screen. · Press z after selecting an item when the mode dial is set to .
400 200 100 Auto ISO
WB ISO
4 Select the setting with v/V.
The setting you select is zoomed and is set.
5 Press MENU to turn off the menu.
· If there is an item that is not displayed, an v/V mark appears on the edges of the location where menu items usually appear. To display an item that is not displayed, select the mark with the control button. · You cannot select items that are grayed out.
28
Menu items
For details on the operation t page 28
The menu items available vary depending on the mode dial position. Only the available items are displayed on the screen.
(
Mode dial position: P M Scene
: available)
Menu for shooting (page 30)
(EV) 9 (Focus) (Metering Mode) WB (White Bal) ISO (P.Quality) Mode (REC Mode)
M
-- -- -- -- -- --
--
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Using the menu
(Interval) (Flash Level)
-- -- -- -- -- --
* *
-- --
PFX (P.Effect) (Saturation) (Contrast) (Sharpness) (Setup)
Menu for viewing (page 37)
(Folder) - (Protect) DPOF (Print) (Slide) (Resize) (Rotate) (Divide) (Setup) Trimming** -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
* The operation is limited according to the Scene mode (page 26). **Available only during enlarged playback.
29
Shooting menu
The default settings are marked with .
For details on the operation t page 28
(EV)
Manually adjusts the exposure.
Toward
Toward + Toward +: Brightens an image. The exposure is determined automatically by the camera. Toward : Darkens an image.
M +2.0EV 0EV m 2.0EV
· For details on the exposure t page 11 · The compensation value can be set in 1/3EV increments. · If a subject is being shot in extremely bright or dark conditions, or the flash is used, the exposure adjustment may not be effective. z Adjusting [EV] by displaying a histogram
8M
FINE
101
4
A
0 EV
B Dark Bright
A histogram is a graph showing the brightness of an image. Set the mode dial to P or Scene in advance, then press repeatedly to display the histogram. The graph display indicates a bright image when skewed to the right side, a dark image when skewed to the left side. A histogram can be used to check the exposure and adjust [EV].
A Number of pixels B Brightness
· The histogram also appears in the following cases, but you cannot adjust the exposure. When the mode dial is set to or M When playing back a single image During Quick Review
30
For details on the operation t page 28
9 (Focus)
You can change the focus method. Use the menu when it is difficult to get the proper focus in auto focus mode.
(unlimited distance) 7.0m 3.0m 1.0m 0.5m Center AF ( )
Focuses automatically on a subject near the center of the frame.
· Using this with the AF lock function lets you shoot in the desired image composition.
VGAFINE
Focuses on the subject using a previously set distance to the subject. (Focus preset)
· When shooting a subject through a net or through window glass, it is difficult to get the proper focus in auto focus mode. In these cases, use of [Focus] is convenient.
Using the menu
P
98
AF range finder frame
S AF
AF range finder frame indicator
Multi AF (Multipoint AF) (Still image ) (Movie )
Focuses automatically on a subject in all ranges of the finder frame.
· This mode is useful when the subject is not in the center of the frame.
VGAFINE
P
98
AF range finder frame
S AF
AF range finder frame indicator
· AF stands for Auto Focus. · Distance setting information in [Focus] is approximate. If you point the lens up or down, the error increases. · The distance selection is limited according to the Scene mode (page 26). · When you are shooting movies, [Multi AF] is recommended as the AF works even with a certain amount of vibration. · When you use [Digital Zoom] or [AF Illuminator], priority AF movement is given to subjects in or near the center of the frame. In this case the or indicator flashes and the AF range finder frame is not displayed.
31
For details on the operation t page 28
z If the subject is out of focus When shooting with the subject at the edge of the frame (or the screen), or when using [Center AF]. the camera may not focus on a subject at the edge of the frame. In a case like this, do as follows.
1 Recompose the shot so that the subject is centered in the AF range finder, and press the shutter button halfway down to focus on the subject (AF lock).
VGA FINE
P
98
AE/AF lock indicator AF range finder frame
S AF
F2.8 30
As long as you do not press the shutter button fully down, you can retry the procedure as many times as you want. 2 When the AE/AF lock indicator stops flashing and remains on, return to the fully composed shot, and press the shutter button fully down.
FINE VGA
P
98
S AF
F2.8 30
(Metering Mode)
Selects the metering mode that sets which part of the subject to measure to determine the exposure.
Spot (Spot metering) ( )
Measures only a part of the subject.
· This function is useful when the subject is backlit or when there is strong contrast between the subject and the background.
VGA
FINE
98
P
Spot metering cross hairs Positions on the subject.
SAF 250 F2.8
Center (Center-weighted metering)( ) Multi (Multi-pattern metering)
Measures the center of the image, and determines the exposure based on the brightness of the subject there. Divides into multiple regions and measures each region. The camera determines a well-balanced exposure.
· For details on the exposure t page 11 · When using spot metering or center-weighted metering, setting [9] (Focus) to [Center AF] is recommended to focus on the metering position (page 31).
32
For details on the operation t page 28
WB (White Bal)
Adjusts the color tones according to the lighting condition in a situation, for example, when the colors of a image look strange.
WB (Flash)
Adjusts for the flash conditions.
· You cannot select this item when shooting movies.
n (Incandescent)
Adjusts for places where the lighting conditions change quickly such as a party hall, or under bright lighting such as photography studios. Adjusts for fluorescent lighting. Adjusts for a cloudy sky. Adjusts for outdoors, shooting night scenes, neon signs, fireworks, or sunrise, or conditions before and after sundown. Adjusts the White Balance automatically.
Using the menu
WB(Fluorescent)
(Cloudy) (Daylight) Auto
· For details on [WB] t page 12 · Under fluorescent lights that flicker, the white balance function may not work correctly even though you select WB(Fluorescent). · Except in [ WB ] modes, the white balance function is automatically set to [Auto] when the flash strobes.
ISO
Selects a luminous sensitivity with units of ISO. The larger the number, the higher the sensitivity.
400 200 100 Auto
· For details on the [ISO] sensitivity t page 12 · Note that the image tends to become noisier as the ISO sensitivity number increases. · [ISO] is set to [Auto] in the Scene mode.
Select a large number when shooting in dark locations or shooting a subject moving at high speed, or select a small number to obtain high image quality.
(P.Quality)
Selects the still image quality.
Fine (FINE) Standard (STD)
Records with high quality (low compression). Records with standard quality (high compression).
· For details on the image quality t page 13
33
For details on the operation t page 28
Mode (REC Mode)
Selects whether the camera performs continuous shooting or not when you press the shutter button.
Multi Burst ( M )
Records 16 frames in succession as a still image file when you press the shutter button.
· This is convenient for checking your form in sports, for example. · You can select the Multi Burst shutter interval in [Interval] mode (page 35).
Burst (
)
Records the maximum number of images in succession (refer to the following table) when you press and hold down the shutter button.
· When "Recording" disappears, you can shoot the next image.
Normal
Does not shoot continuously.
On the [Multi Burst] · You can play back images shot with [Multi Burst] using the following procedure. To pause/resume: Press z on the control button. To play back frame-by-frame: Press b/B in pause mode. Press z to resume playback in series. · You cannot use the following functions in the [Multi Burst] mode: Smart zoom Flash Inserting the date and time Dividing a series of images shot with [Multi Burst] Deleting a frame in a series of images shot with [Multi Burst] Setting the frame interval to a mode other than [1/30] when the mode dial is set to Setting the shutter speed to lower than 1/30 second when the mode dial is set to M · When playing back a series of images shot with [Multi Burst] using a computer or a camera not equipped with the Multi Burst function, the image is displayed as a single image with 16 frames. · The image size of images shot in the [Multi Burst] mode is 1M. · You may not be able to shoot images in the [Multi Burst] mode depending on the Scene mode (page 26). On the [Burst] · The flash is set to (No flash). · When recording with the self timer, a series of a maximum of five images is recorded. · When the mode dial is set to M, you cannot set the shutter speed in the [Burst] mode to 1/6 second or slower. · When the battery level is low, or when the "Memory Stick" is full, the [Burst] stops. · You may not be able to shoot images in the [Burst] mode depending on the Scene mode (page 26).
34
For details on the operation t page 28
The maximum number of continuous shots
(Units: images)
DSC-W5/W15 Quality Size Fine -- -- Standard -- -- Fine DSC-W7/W17 Standard
7M 3:2 5M 3:2 3M 1M VGA(E-Mail)
5 5 6
--
8 8 11 Using the menu
--
9 9 13 32 100
15 15 24 59 100
9 22 85
17 41 100
M
(Interval)
Selects the frame interval in the [Multi Burst] mode (page 34).
1/7.5 (1/7.5") 1/15 (1/15") 1/30 (1/30")
· This setting cannot be made when [Mode] (REC Mode) in the menu is set to other than [Multi Burst] (page 34).
(Flash Level)
Adjusts the amount of flash light.
+ ( +) Normal ( )
Toward : Makes the flash level lower. Toward +: Makes the flash level higher.
· To change flash mode t step 5 in "Read This First"
35
For details on the operation t page 28
PFX (P.Effect)
Allows you to shoot an image with special effects.
B&W( Sepia ( Off ) )
Records the image in monochrome (black and white). Records the image in sepia (like an old photograph). No effect.
· This setting is not maintained when the power is turned off.
(Saturation)
Adjusts the saturation of the image.
+( )
Toward +: Brightens the color.
Normal ( )
Toward : Darkens the color.
(Contrast)
Adjusts the contrast of the image.
+( )
Toward +: Enhances the contrast.
Normal ( )
Toward : Reduces the contrast.
(Sharpness)
Adjusts the sharpness of the image.
+( )
Toward +: Sharpens the image.
Normal ( )
Toward :Softens the image.
(Setup)
See page 44.
36
Viewing menu
The default settings are marked with .
For details on the operation t page 28
(Folder)
Selects the folder containing the image you want to play back (when using a "Memory Stick" only).
OK Cancel
See the following procedure. Cancels the selection. Using the menu
1 Select the desired folder with b/B on the control button.
Select Folder 102 2/2 Folder Name:102MSDCF No. Of Files: 9 Created: 2005 1 1 1:05:34AM : OK Cancel
BACK/NEXT
2 Select [OK] with v, then press z.
z On the [Folder] The camera stores images in a specified folder of a "Memory Stick" (page 50). You can change the folder or create a new one. · To create a new folder t [Create REC. Folder] (page 50) · To change the folder for recording images t [Change REC. Folder] (page 51) · When multiple folders are created in the "Memory Stick" and the first or last image in the folder is displayed, the following indicators appear. : Moves to the previous folder. : Moves to the next folder. : Moves to either the previous and next folders.
37
For details on the operation t page 28
- (Protect)
Protects images against accidental erasure.
Protect (-) Exit
See the following procedure. Exits the Protection function.
To protect images in single-image mode
1 Display the image you want to protect. 2 Press MENU to display the menu. 3 Select [-] (Protect) with b/B on the control button, then press z. The image is protected and the - (protect) indicator appears on the image.
VGA
2/9
-
Protect Exit
BACK/NEXT
4 To protect other images, select the desired image with b/B, then press z.
To protect images in index mode
1 Press (index) to display the index screen. 2 Press MENU to display the menu. 3 Select [-] (Protect) with b/B on the control button, then press z. 4 Select [Select] with v/V, then press z. 5 Select the image you want to protect with v/V/b/B, then press z. A green - indicator appears on the selected image. - (green)
·
SELECT
MENU
TO NEXT
6 Repeat step 5 to protect other images. 7 Press MENU. 8 Select [OK] with B, then press z. The - indicator turns white. The selected images are protected.
· To protect all images in the folder, select [All In This Folder] in step 4, and press z. Select [On] with B, then press z.
38
For details on the operation t page 28
To cancel the protection
In single-image mode Press z in step 3 or 4 of "To protect images in single-image mode." In index mode 1 Select the image for which you want to remove protection in step 5 of "To protect images in index mode." 2 Press z to turn the - indicator gray. 3 Repeat the operation above for all images to be unprotected. 4 Press MENU, select [OK] with B, and then press z. Using the menu
To cancel protection of all images in the folder
Select [All In This Folder] in step 4 of "To protect images in index mode," and press z. Select [Off] with B, then press z.
· Note that formatting the recording media erases all the data stored on it, even if images are protected, and these images cannot be recovered. · It may take some time to protect an image.
DPOF
Adds a (Print order) mark to images you want to print (page 72).
(Print)
See page 69.
(Slide)
Plays back recorded images in order (Slide show).
Interval
3 sec 5 sec 10 sec 30 sec 1 min
Sets the slide show interval.
39
For details on the operation t page 28
Image Folder
All
Plays back all images in the selected folder. Plays back all images stored on the "Memory Stick".
Repeat On
Off
Plays back images in a continuous loop. After all the images have been played back, the slide show ends. See the following procedure. Cancels the slide show.
Start Cancel
1 Select [Interval], [Image] and [Repeat] with v/V/b/B on the control button. 2 Select [Start] with V/B, then press z. The slide show starts. To end the slide show, press z, select [Exit] with B, then press z.
· During a slide show, you can display the previous/next image with b/B. · The [Interval] time is just a guideline, so it may vary depending on the image size, etc.
(Resize)
You can change the image size of a recorded image (Resize), and save it as a new file. The original image is retained even after resizing.
7M (DSC-W7/W17 only) 5M 3M 1M VGA Cancel
Cancels resizing. The setting size is just a guideline. t step 4 in "Read This First"
1 Display the image you want to resize. 2 Press MENU to display the menu. 3 Select [ ] (Resize) with b/B, then press z. 4 Select the desired size with v/V, then press z. The resized image is recorded in the recording folder as the newest file.
· For details on [Image Size] t step 4 in "Read This First" · You cannot change the size of movies or [Multi Burst] images. · When you change from a small size to a large size, the image quality deteriorates.
40
For details on the operation t page 28
· You cannot resize to an image size of 3:2. · When you resize a 3:2 image, the upper and lower black portions will be displayed on the image.
(Rotate)
Rotates a still image.
Using the menu
Rotates an image. See the following procedure.
OK Cancel
1 Display the image to be rotated.
Determines the rotation. See the following procedure. Cancels rotation.
2 Press MENU to display the menu. 3 Select [ 4 Select [ ] (Rotate) with b/B on the control button, then press z. ] with v, then rotate the image with b/B.
5 Select [OK] with v/V, then press z.
· You cannot rotate protected images, movies, or [Multi Burst] images. · You may not be able to rotate images shot with other cameras. · When viewing images on a computer, the image rotation information may not be reflected depending on the software.
(Divide)
Cuts movies, or deletes unnecessary portions of movies. This is the recommended function to use when the internal memory or "Memory Stick" capacity is insufficient, or when you attach movies to your e-mail messages.
· Note that the original movie is deleted and that number is skipped. Also note that you cannot restore files once you cut them.
OK Cancel
See the following procedure. Cancels division.
41
For details on the operation t page 28
Example: Cutting a movie numbered 101_0002
This section describes an example of dividing a movie numbered 101_0002 and deleting it in the following file configuration.
101_0001 1 101_0003 3
2 101_0002
1 Cutting scene A.
1 A 2 101_0002 B 3
Divide
101_0002 is divided into 101_0004 and 101_0005.
2 Cutting scene B.
101_0004 1