Text preview for : JBL.Ctrl25.pdf part of JBL Control 25 Compact Speaker Owner Manual
Back to : JBL.Ctrl25.pdf | Home
Control 25
®
Professional Series
Compact Indoor/Outdoor Background/Foreground Speaker
Key Features:
Components: 5¼" Polypropylene coated woofer, ¾" Titanium coated horn loaded tweeter. Built-in InvisiBall ® mounting hardware Weather resistant enclosure and transducers Readily paintable 90° x 90° high frequency horn Overload Protection Circuitry Sensitivity: 88 dB SPL, 1W, 1m The Control 25 is perhaps the most versatile of JBL Professional's Control Contractor Series indoor/outdoor loudspeakers. Its robust nature makes the Control 25 a perfect choice for restaurants, health clubs, outdoor theme and water parks or other applications where foreground/background music and paging are required. The unique InvisiBall® mounting hardware is included in each system and makes short work of permanent installation. The InvisiBall mounting method adds the benefit of vertical rotation of up to 37° off-axis and horizontal rotation of up to 44° off-axis. Because InvisiBall adjustments are made through a hidden access behind the logo badge, the grill never needs to be removed and there exists a high degree of theft deterrence as well. The Control 25 readily accepts a variety of paints and finishes to match any decor. Weather resistance is maximized by coating the woofer cone in polypropylene and terminating its circumference in JBL's WeatherEdgeTM, a seamless, rubberized extension of the woofer surround that provides added protection to critical transducer elements. The polycarbonate tweeter diaphragm is reinforced with a thin film of titanium for added rigidity and endurance against sun, salt and moisture. Zinc plated grilles resist rusting in the harshest conditions. Available in black (Control 25) and white (Control 25-WH).
Specifications:
Frequency Range (-10 dB)1: Continuous Program: Power Capacity2: Sensitivity3: Directivity Factor (Q): Directivity Index (DI): Nominal Impedance: Crossover Frequency: Nominal Coverage: LF Driver: HF Driver: Enclosure Material: Overload Protection: Termination: Environmental: Dimensions (H x W x D): Net Weight (ea): Shipping Weight (pr): Included Accessories: 80 Hz to 16 kHz 150 Watts 88 dB SPL, 1W, 1m 5.3 7.2 8 ohms 3.0 kHz 90° x 90° 135 mm (5.25 in) Polypropylene coated paper w/WeatherEdge 19 mm (.75 in) Titanium coated polycarbonate HIPS (High Impact Polystyrene) Full-Range power limiting to protect network and transducers Spring terminals, accepts banana plug Conforms to Mil Spec 810 for humidity, salt spray, temperature & UV. IEC 529 IP-X4 splashproof rating. 236 x 188 x 149 mm (9.3 x 7.4 x 5.8 in) 2.3 kg (5 lbs) 5 kg (11 lbs) Invisiball Assembly 6 mm x 100 mm hex key
Optional Accessories: MTC-25V: For vertical columnar orientation of up to 3 loudspeakers MTC-25/23H: For horizontal splaying of two speakers. Three brackets array up to six loudspeakers in a 360° array. MTC-28/25CM: Ceiling-mount adapter. MTC-25SSG: Stainless Steel Grille for harsh environments. Available in silver, black (-BK) or white (-WH) MTC-25WMG: WeatherMaxTM Stainless Steel Grille protects against driving precipitation. Available in black or white (-WH) MTC-PC2: Input panel cover protects input terminals in outdoor environments
Half-space (on-wall). Continuous program power is a conservative expression of the system's ability to handle normal speech and music program material and is defined as 3 dB above the Continuous Pink Noise Rating (IEC-shaped pink noise with a 6 dB crest factor, for 100 hours continuously). 3 Half-space (on-wall), ave 100 Hz to 10 kHz.
1 2
JBL continually engages in research related to product improvement. Changes introduced into existing products without notice are an expression of that philosophy.
Control 25 Compact Indoor/Outdoor Background/Foreground Speaker
Frequency Response in half-space (2 , solid line) and full-space (4 , dotted line), and Input Impedance
®
Beamwidth
Directivity Index, Q
Horizontal Off Axis Frequency Response
Vertical Off Axis Frequency Response (up)
Vertical Off Axis Frequency Response (down)
Horizontal 1/3 Octave Polars
Architectural Specifications:
The loudspeaker shall consist of a 135 mm (5-1/4 in) low frequency transducer, 19 mm (3/4 in) high frequency transducer, and frequency dividing network installed in a ported enclosure. The low frequency voice coil shall be 25 mm (1 in) in diameter. Performance specifications of a typical production unit shall be as follows: Measured sensitivity (SPL at 1 m [3.3ft] with 2.83V input, averaged from 500 Hz to 1.5 kHz) shall be at least 88 dB-SPL. Usable frequency response shall extend from 80 Hz to 16 kHz (10 dB below rated sensitivity, in half-space, with no external equalization). Nominal impedance shall be 8 ohms. The frequency dividing network shall have a crossover frequency of 3.0 kHz. Rated power capacity shall be at least 150 watts continuous program power, defined as 3 dB above a test signal of filtered random noise conforming to international standard IEC268-5 (shaped pink noise with a peak-to-average ratio of 6 dB), for 100 continuous hours duration. The system shall be protected against damage from occassional overpowering via full range series lamps that limits the power to the network and transducers. The high frequency transducer shall be horn-loaded to more evenly cover a nominal 90° horizontal by 90° vertical area. The enclosure shall be constructed of high-impact polystyrene for protection against the elements in outdoor applications, and for paintability. The grille shall be completely zinc-coated for resistance against rusting, shall be bake-painted black, and shall be secured via screws to keep it in place when facing downward. The low frequency transducer shall have a polypropelene-coated cone and a butyl rubber surround which shall extend seamlessly over the edge of the speaker frame for protection against the elements. The high frequency transducer shall be constructed of polycarbonate, reinforced with a titanium film for additional weather resistance. The system shall withstand Mil Spec 810 testing with specified time durations for exposure to the following environments with no effect on its acoustical performance or structural integrity: salt spray (method 509.3), temperature 19°C to 49°C (method 501.3 and 502.3), 95% humidity (method 507.3) and ultra-violet (method 505.3). The system shall have a IEC 529 splashproof rating of IP-X4. For theft deterrence, the installation access area shall be hidden behind a snap-out cover, and the access area shall be on the front of the loudspeaker for ease of installation and adjustment. The loudspeaker shall be rotatable over a minimum of ±35° in all directions via a balltype mounting system. The ball mechanism shall be internal to the cabinet to allow low-profile mounting and better stability via a short moment arm. The logo shall be rotatable for proper orientation when the loudspeaker is mounted horizontally or vertically. The external wiring connectors shall be spring loaded and gold plated, and shall accept bare wire, single or dual banana-type connectors with 19 mm (3/4 in) spacing. Overall cabinet dimensions shall be no greater than 236 mm (9.3 in) high by 188 mm (7.4 in) wide by 148 mm (5.8 in) deep and shall weigh no more than 2.3 kg (5 lbs). The finish shall be a paintable lighly textured black. The system shall be the JBL Model Control 25 with included Invisiball® mounting system.
Control 25 Compact Indoor/Outdoor Background/Foreground Speaker
Vertical 1/3 Octave Polars
®
JBL Professional 8500 Balboa Boulevard, P.O. Box 2200 Northridge, California 91329 U.S.A.
A Harman International Company
SS Control 25 CRP 10M 12/00