4_16.pdf part of Panasonic VDR-M70 Vdr-M50_M70.part1.rar, Panasonic VDR-M50 and VDR-M70 Service manual text manual preview

Text preview for : 4_16.pdf part of Panasonic VDR-M70 Panasonic VDR-M50 and VDR-M70 Service manual

Back to : Vdr-M50_M70.part1.rar | Home

Message
Disc error has occurred. Format the disc now? YES NO Disc error has occurred. Formatting is not complete.

Cause/condition for message to appear
Appears when a DVD-RAM disc initialized on PC, etc., or a card whose initialization was suspended before, is loaded. Appears when the disc could not be normally formatted because it was dirty. Also appears when a warped or distorted disc was loaded, or a logically damaged disc whose formatting was suspended is loaded. Appears if a problem has occurred during editing of video file.

Troubleshooting
Choose "YES" and designate it to initialize the DVD-RAM disc (deleting all recorded data). Clean the disc, or replace it. [Refer to page 4-14] Replace the disc.

Disc error has occurred. Keep disc inside & restart.

Disc full. Cannot execute. Disc has no data.

Disc has no PlayList. Disc includes protected scenes. Delete scenes? YES NO

Disc is full. Cannot add control info.

Disc is not formatted. Format the disc now? YES NO

Appears if the recording capacity of disc has reached the limit during editing of video file. Appears when the MANU button or playback button was pressed with no scene recorded. Appears if switching of play list is selected with no play list registered. Appears if the loaded disc has a program (scene) that is write-protected by the software write-protect function, which is effective in program units. Although the VDR-M70PP/M50PP is equipped with a software disc-protect function that is effective for disc units, it does not comply with software write-protect for program units. (The DVD Forum defines two types of software protect for DVD-RAM disc: disc units and program units.) Appears if the number of scenes on play list exceeds the upper limit (999) while control information is being added. [Refer to *1 page 4-12] Appears when an unformatted DVDRAM disc or one initialized (other UDF2.0) on PC is loaded. Also appears if user rejects partial repair or total repair of video file.

Exit the Disc Navigation function and set the power switch to "POWER OFF" with the disc loaded; then reconnect the AC adapter/charger and set the power switch to "VIDEO" or "PHOTO (disc)". (The VDR-M70PP/ M50PP will automatically repair the video file.) Delete unnecessary scenes, or replace the disc. Operate VDR-M70PP/M50PP after the message disappears. Operate VDR-M70PP/M50PP after the message disappears. Release the write-protect using the device that has the software writeprotect function for program units, or choose "YES" and designate it to delete the scenes.

Delete any unnecessary scenes, or combine several scenes, and then operate the VDR-M70PP/M50PP. When initializing it (deleting all recorded data), choose "YES" and designate it. Choose "NO" and designate partial repair or total repair. When initializing it (deleting all recorded data), choose "YES" and designate it.