Text preview for : 4_21.pdf part of Panasonic VDR-M70 Panasonic VDR-M50 and VDR-M70 Service manual
Back to : Vdr-M50_M70.part1.rar | Home
Message
Use AC adapter/charger.
Cause/condition for message to appear
Appears if a battery is used when finalizing a DVD-R disc. The specifications state that DVD-R disc can be finalized only when the AC adapter/ charger powers the VDR-M70PP/M50PP.
Troubleshooting
Terminate the Disc Navigation function, set the power switch to "POWER OFF" with the disc loaded, remove the battery, and then connect the AC adapter/charger: Finalize the disc again. Set the power switch to "POWER OFF" with the disc loaded, remove the battery, and then connect the AC adapter/charger. [Refer to *3 page 4-14] Stop trying to copy a video, or select photos and execute copy. Release the software disc-protect.
Use AC adapter/charger. Turn off power.
VIDEO scene cannot be copied to card. Write protected. Check disc.
Write-protected. Check card.
Appears if a battery is used when repairing video files. The specifications state that video files can be repaired only when the AC adapter/charger powers the VDR-M70PP/M50PP. Appears if an attempt is made to copy video to card. The specifications state that no video is unrecordable on card. Appears if a DVD-RAM disc that was write-protected for disc units by software disc-protect function is loaded, or if an attempt is made to record on writeprotected disc. Appears when an SD memory card whose erasure prevention switch was locked is loaded.
Unlock the erasure prevention switch of SD memory card.
Note: The listed messages are subject to change without notice for improvement of performance.