Text preview for : 4_45.pdf part of Panasonic VDR-M70 Panasonic VDR-M50 and VDR-M70 Service manual



Back to : Vdr-M50_M70.part1.rar | Home

(3) Backup method
Information: If it is not possible to back up the data in EEPROM to be replaced because the VDR-M70PP/M50PP is not turned on, etc., replace the MAN-H/MAN circuit board, and then refer to "6-4-1 Initial Data Write". 1) Choose DATA INITIALIZE on the ADJUST MENU screen. 2) Click the EXECUTE button on ADJUST MENU screen to proceed with the DATA INITIALIZE MENU screen. 3) Choose Original Data Backup on the DATA INITIALIZE MENU screen. Note: Do not choose "Initial Data Write" on the DATA INITIALIZE MENU. Refer to "6-4-1 Initial Data Write" after backup for "Initial Data Write". 4) Click the EXECUTE button on DATA INITIALIZE MENU screen to proceed with the BACKUP FILE SELECT screen. 5) From the BACKUP FILE SELECT screen, select or set the names of folder and file in which the data is stored. This section refers to the folder and file as "EEP" and "backup.eep" for explanation: Freely select and set easyto-understand names. 6) Click the SAVE button on BACKUP FILE SELECT screen to start backup. The progress status can be confirmed using the PROGRESS STATUS dialog. 7) When backup is complete, the BACKUP FINISHED dialog will appear: Click the OK button in dialog to restore the DATA INITIALIZE MENU screen. 8) Then click the RETURN buttons on each menu screen to restore the MODEL SELECT screen, and click the EXIT button on MODEL SELECT screen to exit the adjustment program. 9) Disconnect the VDR-M70PP/M50PP, jig/tool and power supply, and then replace the MAN-H/MAN circuit board.

ADJUST MENU screen
MANUAL ADJUSTMENT PROGRAM for SERVICE STATION

MODEL NAME: ××××
ADJUST MENU

DATA INITIALIZE VIDEO LEVEL BURST LEVEL SAMPLING PULSE AUTO FUCUS AUTO IRIS CONTROL MATRIX CHROMA GAIN SPOT NOISE LCD EVF

1

2
CONNECTION

EXECUTE

RETURN

DATA INITIALIZE MENU screen
Data Initialize

FILE MENU

Initial Data Write

Backup Data Write

Original Data Backup

3 8

4
CONNECTION

EXECUTE

RETURN

BACKUP FILE SELECT screen
? Look in (T):

EEP

5
6
File name (N): File of type (T):

backup

Save (S) Cancel

*

.eep

PROGRESS STATUS dialog
EEPROM Data Backup

PLEASE WAIT A MOMENT

BACKUP FINISHED dialog
FINISHED FINISHED READING DATA OK

7