Text preview for : 5_05.pdf part of Panasonic VDR-M70 Panasonic VDR-M50 and VDR-M70 Service manual



Back to : Vdr-M50_M70.part1.rar | Home

(4) Front Block and R Block
1) Open the jack cover (c), and then remove one screw [N]. 2) Remove one screw [N]. 3) Remove the FRT-H/FRT circuit board (d) from AEL-H/AEL circuit board (e) in the direction of the arrow. 4) Remove the front block (a) from R block (b) in the direction of the arrow.

(a) (b) (c) (d) (e)

Front block R block Jack cover FRT-H/FRT circuit board AEL-H/AEL circuit board

(b)

(a)

4) (e) 3) 1) [N] (d) 2) [N] (c)
[N] M1.7x4 (Silver)

Fig. 5-3-5
(b)

(5) Jack Cover
1) Release the two tabs, and then remove the jack cover (a).

(a) Jack cover (b) Front block

Tabs

(a)

Fig. 5-3-6

(6) FRT-H/FRT circuit board, Microphone, and Microphone Cover
FRT-H/FRT circuit board (a) 1) Disconnect the flat cable from microphone. 2) Remove one screw [D], and then remove the FRT-H/FRT circuit board. Microphone (b) and Microphone Cover (c) 3) Remove one screw [D], and then remove the microphone and microphone cover from the front case (d).

(a) (b) (c) (d)

FRT-H/FRT circuit board Microphone Microphone cover Front Case

2) [D] (a)

(d)

1)

3) [D]

(b) (c)
[D] M1.7x4 (Black)

Fig. 5-3-7