Text preview for : vacuum_cleaner_®_.pdf part of Philips HR 8570/B service manual vacuum cleaner [1400W - 4322 277 00439 (01/01)] pag. 6



Back to : vacuum_cleaner_®_.pdf | Home

Mobilo

Vacuum cleaner HR 8570 /B

!

Service Information

!

Service Information

Philips Domestic Appliances and Personal Care

Service Manual
PRODUCT INFORMATION
Maximum air displacement Maximum vacuum water column Power consumption (IEC) Dust storage capacity Cord length Filter system : : : : : : : : : : : : 37 l/sec. 310 cm 1400 W 3 litres 6.3 metres Paper dustbag Motor inlet filter Exhaust air filter 44.5 x 29.5 x 25 cm 5.5 kg Brown 77 dB

SERVICE INFORMATION
- Component configuration on exploded view may differ in case of specific versions. However, the actual components are distinguished bij means of code numbers. - The spare parts have been standardized as much as possible. - Item 6, cotton dustbag, is used in those countries where paper dustbags are not available. - Item 21 is provided with a long cord-winder spring; both long and short cords can be used in combination with this spring. - Cordwinder spring has to be tensioned till maximum minus approx. 1,5 revolution. - Depending on the original length of the cord, the spare cord must be shortened. - To (dis)assemble the appliance use TORX screw driver no T15 = 4822 395 10329, which is one of a set consisting of T20, T15, TI0, T9, T8, T7 and T6 = 4822 395 50145. - Adjusting the PCB on the motor to 220V, 60Hz. 1. Make sure that the potentiometer (item 36) is set at min. position. 2. Adjust the potentiometer on the PCB item 45, on the motor to 220V/60Hz to allow the motor to run smoothly. Please note: the standard setting of the spare PCB is 230V/50Hz. There are open-circuit voltages on all wires.

-

Dimensions cleaner Weight cleaner Colour cleaner Noise

OPTIONAL
Exhaust air filter Active carbon filter Active carbon filter replacem. set S-class filter S-class filter replacement set Sydney cotton dustbag Sydney closable pap. dustbag Sydney 3-M dustbag HR 6932 (8836 932 01210) HR 6949 (8836 949 01010) HR 6968 (items 12 + 13) HR 6992 (8836 992 01010) HR 6994 (items 19 + 20) HR 6997 (8836 997 01010) HR 6999 (8836 999 01010) HR 6999 (8836 999 90010)

This product meets the requirements regarding interference suppression on radio and TV.

After the product has been repaired, it should function properly and has to meet the safety requirements as officially laid down at this moment.

Published by Philips Domestic Appliances and Personal Care

Printed in the Netherlands

© Copyright reserved

Subject to modification

4322 277 00439 01/01

Pos. 12 nc 1 2 3 4 5 6 4322 003 16790 4322 000 67680 4322 009 07380 4322 001 94690 4322 003 16760 8836 999 01010 8836 999 90010 8836 997 01010 4322 009 06760 4322 003 12280 4322 003 12020 4322 005 11510 4322 005 08720 4322 009 07040 4322 003 10950 4322 000 37300 8836 949 01010 4322 005 08670 4322 001 72780 4322 003 12080 4322 003 16770 4322 009 07400 8836 992 01010 8836 932 01210 4322 005 08660 4322 009 07160 4322 009 05350 4322 001 72360 4322 009 04800 4322 009 05060 4322 007 11960 4322 007 12150 4322 007 12190 4322 007 11930 4322 007 11920

description acc. cover dust indicator spring dust cover brown packing ring front cover Sydney closable pap. dustbags (opt.) Sydney 3M dustbag Sydney cotton dustbag (opt.) dustbag carrier clamp of dustbag carrier dust compartment sealing turn knob back panel stamped inletgrill + trio filter active carbon filter grill trio filter active carbon filter pedal buffering motor motor disc cord outlet lower housing + wheels S-class filter AFS micro filter grill S-class filter grill AFS micro filter reel half spring unit brake tyre reel half contact unit contact ring plate cord Australia l = 6.3 m cord Japan / low voltage cord UK l = 6.3 m cord Europe 4.8 mm l = 6.3 m cord Europe 4.8 mm l = 8.5 m (opt.)

Pos. 12 nc 30 31 32 33 35 36 37 41 42 43 44 45 46 47 48 75 76 77 78 81 103 104 105 114 4322 007 12020 4322 006 01280 4322 007 11950 4322 003 12240 4322 005 10760 4322 009 07410 4322 006 07220 4322 003 12030 4322 006 50580 4322 003 12010 4322 001 72790 4322 003 09720 4322 006 20720 4322 000 03700 4322 009 06430 4322 000 09750 4322 004 21850 4322 005 03770 4322 003 12070 4322 004 21160 4322 004 21170 4322 009 05410 4322 004 21050 4322 004 21810 4822 479 20196

description cord Swiss l = 6.3m cord Swiss l = 8.5m cord Italy l = 6.3 m dustbag sealing caster assy standard rear wheel + cover speed control 220-240 V cord winder lever push button switch motor cover rear motor buffer suspension bracket motor print 230 V - 50 Hz PCB clamp motor 220-240 V / 50-60 Hz spring switch knob hose and standard bend bend crevice nozzle 118 mm small nozzle plumeau Tube clip assy 35 mm Telesc. tube + clamp Nozzle RD 262 Turbo nozzle HR 6988 Coupling piece conical Drive belt Brush assy (opt.)

7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 23 24 25 26 27 28 29

(opt.) (opt.)

(opt.) (opt.)

115 4822 528 11128 116 4822 358 10205 117 4822 479 20201

MAIN SWITCH

- To open the appliance, first remove the 2 screws of the control panel (item 11) then with a big screw driver disconnect the 2 snap locks of panel and lower housing (see drawing).
CORD WINDER

M
MOTOR POWER MODULE

ROTARY POTMETER

1

6

2 3 12 13

7

8

4

9

5

CLICK

21÷31

32

33

36 10 11 37

41

42 CLICK

14 15 12 13

48

16 43

17

44 45 46

18

19

20 47

35

DAP1419

AUSTRALIA

26 27 28

EUROPE Ø 4.8mm

29 30 31

FLAT PINS

CH

GB

ITALY

23

24 21 B 25

B

75

76

77

78

81

103

115

104

116 114 117

105

DAP1420