Text preview for : Pioneer-PDS507 cd.pdf part of Pioneer PDS507 cd
Back to : Pioneer-PDS507 cd.pdf | Home
ORDER NO.
RRV2034
COMPACT DISC PLAYER
PD-S507
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Type
MYXK MVXK
Model Power Requirement PD-S507 Remarks
AC220230V AC220230V
CONTENTS
1. SAFETY INFORMATION .................................... 2 2. EXPLODED VIEWS AND PARTS LIST ............. 3 3. SCHEMATIC DIAGRAM ................................... 10 4. PCB CONNECTION DIAGRAM ....................... 17 5. PCB PARTS LIST ............................................. 24 6. ADJUSTMENT .................................................. 27 PIONEER ELECTRONIC CORPORATION 7. GENERAL INFORMATION .............................. 35 7.1 IC ................................................................ 35 7.2 DISPLAY .................................................... 36 7.3 BLOCK DIAGRAM ..................................... 37 8. PANEL FACILITIES AND SPECIFICATIONS ................................................................... 38
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER ELECTRONIC (EUROPE) N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 501 Orchard Road, #10-00 Wheelock Place, Singapore 238880
PIONEER ELECTRONIC CORPORATION 1998
TZZR OCT. 1998 Printed in Japan
PD-S507
1. SAFETY INFORMATION
This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer. Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair complex products such as those covered by this manual. Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty. If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so and refer the repair to a qualified service technician.
IMPORTANT THIS PIONEER APPARATUS CONTAINS LASER OF CLASS 1. SERVICING OPERATION OF THE APPARATUS SHOULD BE DONE BY A SPECIALLY INSTRUCTED PERSON.
LASER DIODE CHARACTERISTICS MAXIMUM OUTPUT POWER: 5 mw WAVELENGTH: 780 785 nm
LABEL CHECK
MVXK type
Additional Laser Caution
1. Laser Interlock Mechanism The position of the switch (S601) for detecting loading state is detected by the system microprocessor, and the design prevents laser diode oscillation when the switch (S601) is not on CLMP terminal side (CLMP signal is OFF or high level.). Thus, the interlock will no longer function if the switch (S601) is deliberately set to CLMP terminal side (low level). The interlock also does not function in the test mode . Laser diode oscillation will continue, if pin 33 of CXA1782CQ (IC151) on the MAIN BOARD ASSY is connected to GND, or pin 22 of IC301(LDON) is connected to low level (ON), or else the terminals of Q151 are shorted to each other (fault condition). 2. When the cover is opened with the servo mechanism block removed and turned over, close viewing of the objective lens with the naked eye will cause exposure to a Class 1 laser beam.
MYXK type
MYXK type
REAR
Refer to page 28.
2
PD-S507
2. EXPLODED VIEWS AND PARTS LIST
NOTES : Parts marked by " NSP " are generally unavailable because they are not in our Master Spare Parts List. The mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation. Screw adjacent to mark on the product are used for disassembly.
2.1 PACKING
8
9
7
For MVXK
6
12 4 5 2
11
2 1
(1) PACKING PARTS LIST
Mark No.
1 2 3 4 5
Description
Protector F Protector R Packing Case Packing Sheet (750 × 600 × 0.5) Output Cable (L=1.2m) Operating Instructions Batteris (R03, AAA) Remote Control Unit(CU-PD096) Battery Cover Spacer Polyethylene Bag (115 × 270 × 0.05) Warranty Card
Part No.
PHA1329 See Contrast table (2) See Contrast table (2) Z23007 PDE1248 See Contrast table (2) VEM022 XWW1001 XZN1001 See Contrast table (2) See Contrast table (2) ARY7022
10 NSP 3 MVXK Only
6 7 8 9 10 11
NSP
12
(2) CONTRAST TABLE
PD-S507/MYXK and MVXK are constructed the same except for the following:
Mark No.
2 3 6
Symbol and Description MYXK type
Protector R Packing Case Operating Instructions (English/ French/ German/Italian/ Dutch/ Swedish/Spanish/Portuguese) Operating Instructions (English) Spacer Polyethylene Bag (115 × 270 × 0.05) PHA1331 PHG2314 PRE1270
Part No. MVXK type
PHA1332 PHG2330 Not used
Remarks
6 10 11
Not used Not used Not used
PRB1274 PHC1078 Z21013
3
PD-S507
2.2 EXTERIOR
26 7
25 12 8 25 5 21 26 8 4 8 28 19 Refer to "2.4 LOADING MECHANISM ASSY T 96". 8 6 7 7 22 7 2 1 14 16 13 10 11 : MVXK type Only 24 24 For MVXK type 29 5
Fuse Holder
8
3
20
24 8
17 15 7
Removal of the Tray Panel 18 9 15 7 18
2
17 15 7 15 7 9
24
1
Refer to "2.3 FRONT PANEL SECTION".
7
24
4
PD-S507
(1) EXTERIOR PARTS LIST
Mark No.
1 2 3 4 5 6 7 8 9 10 NSP NSP 11 12 13 14 15 16 17 18 19 20
Description
MAIN BOARD ASSY POWER BOARD ASSY COAXIAL OUTPUT BOARD ASSY Strain Relief AC Power Cord Power Transformer Screw Screw (3 × 6) Insulator Rubber Spacer B PCB Spacer Bonnet Under Base 56 Rear Base Cushion 55 PCB Holder Insulator Disc Guard Loading Mechanism Assy T96 Caution Label HE
Part No.
See Contrast table (2) PWZ3770 See Contrast table (2) CM22B See Contrast table (2) PTT1236 ABA1011 ABA1207 AMR7198 PEB1281 PEB1304 PYY1162 PNA2214 See Contrast table (2) PNM1316 PNW2100 PNW2766 REC1305 PXA1604 See Contrast table (2)
Mark No.
21 22 23 24 25 26 27 28 29
Description
Caution Label Caution Label ............................. Screw Screw Screw ............................. Binder (SKB90BK) Fuse (5A)
Part No.
PRW1244 See Contrast table (2) BBZ30P080FCC BSZ30P070FMC FBT40 P080FZK ZCASKB90BK See Contrast table (2)
NSP
NSP
(2) CONTRAST TABLE
PD-S507/MYXK and MVXK are constructed the same except for the following:
Mark No.
1 3 5 14 20 22 29
Symbol and Description MYXK type
MAIN BOARD ASSY COAXIAL OUTPUT BOARD ASSY AC Power Cord Rear Base Caution Label HE Caution Label Fuse (5A) PWZ3762 Not used PDG1043 PNA2419 PRW1233 VRW1094 Not used
Part No. MVXK type
PWZ3763 PWZ3775 PDG1055 PNA2442 Not used PRW1018 PEK1003
Remarks
5
PD-S507
2.3 FRONT PANEL SECTION
14
2
14
8 11 10
14
15
6
13 4 1
14
7
18
14 3 9 5
12 16 17
FRONT PANEL SECTION PARTS LIST
Mark No.
1 2 3 4 5 6 7 8 9 10
Description
SWITCH BOARD ASSY MODE BOARD ASSY HEADPHONE BOARD ASSY Screw (FE) HEADPHONE Knob MODE Button MANUAL Button POWER Knob Display Window Name Plate
Part No.
PWZ3766 PWZ3768 PWZ3773 ABA7009 PAC1707 PAC1887 PAC1889 PAC1891 PAM1759 PAM1776
Mark No.
11 12 13 14 15 NSP 16 17 18
Description
LED Lens Function Panel PLAY Button B Screw 26P FFC/30V Tray Badge Tray Name Plate Cord Clamper
Part No.
PNW2019 PNW2807 RAC2204 PPZ30P080FMC PDD1142 PAN1358 PNW2806 RNH184
6
PD-S507
2.4 LOADING MECHANISM ASSY T96
36 2 27 2
23
Refer to " 2.5 SERVO MECHANISM ASSY T96". 31
15
10 32
Spacer 35
28 26 9 34 25 A 12 14 14 A 11
19
13
24 18 8 33 A 1 20
30
6 5 7 29 16 17 17 30 22 22 21 21 3 4
7
PD-S507
LOADING MECHANISM ASSY T96 PARTS LIST
Mark No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
Description
Lever Switch (S601) Float Screw Rubber Belt Motor Pulley Drive Gear Synchronized Lever Gear Pulley SW Head Float Base Left Cam Right Cam Float Spring Lock Spring Float Rubber Table Rubber Sheet Tray Table Guide Lock Plate D.C. Motor (0.75W, LOADING) Screw Screw Screw Turn Table Assy Loading Base Table Shaft Holder Assy
Parts No.
DSK1003 PBA1027 PEB1186 PNW1634 PNW1996 PNW2168 PNW1998 PNW1999 PNW2767 PNW2001 PNW2002 PBH1120 PBH1121 PEB1014 PEB1181 PNW2760 PNW2004 PNW2005 PXM1010 BMZ26P040FMC IPZ26P060FCU IPZ20P080FMC PEA1199 PNW2761 PXA1383
Mark No.
NSP 26 27 28 29 30 31 32 33 34 35 36
Description
Turn Table Servo Mechanism Assy T96 E Ring Shaft Holder Screw Screw Earth Lead Caution Label Connector Assy 5P Table Base Tray Assy TT
Parts No.
PNR1044 PXA1606 YE20FUC PNB1382 BPZ26P060FMC BBZ26P060FMC DE010VF0 PRW1244 PDE1243 PXA1382 PXA1449
NSP
NSP NSP
¶ How to Install the Disc Table
1 Use nipper or other tool to cut the three sections marked 2 While supporting the spindle motor shaft with the
stopper, put spacer on top of the carriage base, and stick the disc table on top (takes about 9kg pressure). Take off the spacer.
A in figure 1. Then remove the spacer
1
A
FFC Holder
2
Spacer
(Pressure of about 9kg) Disc table 2.1mm
A
Spacer setting Position
Spacer
PCB
Carriage Base
Spindle motor Stopper
8
PD-S507
2.5 SERVO MECHANISM ASSY T96
21 20 22 18 18 23
17
20
24
19
SERVO MECHANISM ASSY T96 PARTS LIST
1 3 2 13 15
Mark No.
25 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
Description
Carriage D.C. Motor (0.3W) Pinion Gear Spindle Motor Assy (SPINDLE, with Oil) Carriage Base Disc Table Screw Screw Gear 3 Gear 2 Washer Pickup Assy Guide Bar Gear 1 Gear Stopper Screw Earth Spring Mechanism Base T.T.96 Screw Mechanism Board Assy Binder Float Rubber Float Rubber FFC Holder Connector Assy 4P Carriage Motor Assy (CARRIAGE) Rack Spring Rack Holder F.F.C.(16P)
Parts No.
PXM1027 PNW2055 PEA1236 PNW2699 PNW1067 JFZ20P030FNI JFZ17P025FZK PNW2054 PNW2053 WT12D032D025 PEA1335 PLA1094 PNW2052 PNB1303 BPZ20P060FMC PBH1132 PNB1592 BPZ26P100FMC PWX1192 PEC107 PEB1031 PEB1170 PNW2734 PDE1238 PEA1246
16
14
12
4 6 7 8 10 5 9 26 27 28 NSP
11
26 27 28
PBH1128 PNW2056 PDD1185
9
1
2
3
4
PD-S507
3. SCHEMATIC DIAGRAM
A
Note: When ordering service parts, be sure to refer to "EXPLODED VIEWS AND PARTS LIST" or "PCB PARTS LIST".
3.1 OVERALL SCHEMATIC DIAGRAM
LOADING MECHANISM ASSY T 96 (PXA1604)
PICK UP ASSY PEA1335
CN201 CN11
KPD7
CN131
SLW16S-IC7
B
CN 501
52147-0410
B
SERVO MECHANISM ASSY T96 (PXA1606)
DSG1016 SPINDLE MOTOR ASSY PEA1236 CN610
MAIN BOARD ASSY (PWZ3762: MYXK) (PWZ3763: MVXK)
CN202 CN 331
52147-0310
C
A
CARRIAGE MOTOR ASSY PEA1246
MECHANISM BOARD ASSY (PWX1192)
S601:DSK1003 CLAMP SW
CN351
HLEM26S-1
CLMP OPEN LOAD
CN205
PXM1010 LOADING MOTOR
26 25 24 23 22 21 20 19 18 17 16 15
26 25 24 23 22 21 20 19 18 17 16 15
D
10
A
1
2
3
4
5
6
7
8
PD-S507
A
J11
DYY07-200-2651
WHT YEL
NEUTRAL LIVE
E
POWER BOARD ASSY (PWZ3770: MYXK/MVXK)
Power Transformer (PTT1236: MYXK/MVXK)
AC Power cord PDG1003: MYXK AC220-230V 50/60Hz PDG1055: MVXK AC220-230V 50Hz
B
C
J501
PHONE BOARD ASSY (PWZ3773:MYXK /MVXK)
D20PDY0406B
PD-S507/MVXK Only
V+5D DOUT GND
D
COAXIAL OUTPUT ASSY (PWZ3775: /MVXK) Only
CN701
HLEM26R-1
C
26 25 24 23 22 21 20 19 18 17 16 15
26 25 24 23 22 21 20 19 18 17 16 15
F
SWITCH BOARD ASSY (PWZ3766:MYXK/MVXK)
CN751
52151-0410
D20PDY0410E
J751
PDD1142
G
MODE BOARD ASSY (PWZ3768)
D
11
5 6 7 8
1
2
3
4
PD-S507 3.2 MAIN BOARD ASSY, PHONE BOARD ASSY and COAXIAL OUTPUT ASSY
2
A
B
To PICKUP ASSY
6
220/25 (PCH1128)
MAIN BOARD ASSY (PWZ3762: MYXK) (PWZ3763: MVXK)
3
4
10 µH
MA
MA 0.15 0.15 0.1 0.1
16
220/25 (PCH1128)
9
TL 0.47
18 19
1000/16 (PCH1122)
33
53
220/25 (PCH1128) 220/25 (PCH1128)
B
5
8
220/25 (PCH1128)
7
CN610
220/25 (PCH1128)
C
220/25 (PCH1128)
4.7/50 (PCH1127)
To Loading Motor and S601
23
MA 0.15 4.7/50 (PCH1127)
D
12
B
1
2
3
4
100/50 (PCH1126)
A
10 µH
5
6
7
8
PD-S507
MVXK ONLY
220/25 (PCH1128) RTF1068
A
0: MYXK 1.5k: MVXK 1.5k : MYXK 3k: MVXK
MYXK MVXK
D
59 60 58 65
47/50 (PCH1124)
COAXIAL OUTPUT ASSY (PWZ3775)
1000/16 (PCH1122)
4.7/50 GA
100 (1/2W)
150 µH
220/25 (PCH1128)
100/50 (PCH1126)
1000/16 (PCH1122)
56
47/50 (PCH1124)
B
100/50 (PCH1126) 220/25 (PCH1128) 100 (1/2W)
4.7/25 GA
100
47/50 GA
220/25 (PCH1128)
55 54
C
SIGNAL ROUTE
: AUDIO SIGNAL ROUTE
4.7/50 (PCH1127)
PHONE BOARD ASSY (PWZ3773)
CAUTION: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE. REPLACE ONLY WITH SAME TIME NO. ICP-N10, MFD BY ROHM CO., LTD. FOR IC33 and IC34.
C
4.7/50 (PCH1127)
220/25 (PCH1128)
RTF1167
GA 4700/16 (PCH1119)
4.7/50
E
J11
D
4700/16 (PCH1119)
F
5
CN701
6 7
B C D
8
13
1
2
3
4
PD-S507 3.3 POWER BOARD ASSY, SWITCH BOARD ASSY and MODE BOARD ASSY
A
G
MODE BOARD ASSY (PWZ3768)
SWITCHES
S751: REPEAT S752: TIME S753: EDIT S754: DISPLAY S755: STANDBY
F
SWITCH BOARD ASSY (PWZ3766)
SWITCHES
S701: 7 S702: S703: 3 S704: OPEN/CLOSE S710: 4 1 S711: ¡ ¢
B
AC220230V 50/60 Hz
E
POWER BOARD ASSY (PWZ3770)
AC POWER CORD PDG1003: MYXK PDG1055: MVXK FUSE (5A): PEK1003 (MVXK ONLY)
C
B
CN11
POWER TRANSFORMER PTT1236
D
14
E F G
1
2
3
4
5
6
7
8
PD-S507
A
B
C
D
B
CN351
5
6
7
F
8
15
PD-S507
B MAIN BOARD ASSY Waveforms
Note: The encircled numbers denote measuring point in the schematic diagram.
1 50T-JUMP: After switching to the pause mode, press the manual search key. 2 FOCUS-IN: Press the play key without loading a disc.
2 TP1- Pin 1 :
PLAY MODE (RF) H : 500nsec/div
5 IC202- Pin 3 :
PLAY MODE (FODR)
8 IC202- Pin 9 :
33 IC301- Pin 3 :
H : 2µsec/div
TRACK SEARCH MODE (CADR) H : 200msec/div
PLAY MODE (MDP)
58 IC401- Pin 27 :
PLAY MODE (1 kHz) (CLOK) H : 0.2 msec/div
H : 1msec/div
0.5Vp-p 1.2Vp-p
2.5Vp-p 4Vp-p 5Vp-p
2 TP1- Pin 1 :
TRACK SEARCH MODE (RF) H : 200 µsec/div
1.2Vp-p
6 IC202- Pin 4 :
PLAY MODE (TRDR) H : 1msec/div
0.5Vp-p
9 IC301- Pin 17 :
PLAY MODE ASY0 (EFM)
53 IC301- Pin 9 :
PLAY MODE (PCO)
59 IC401- Pin 26 :
PLAY MODE (1 kHz) (MDAT) H : 0.2 msec/div
H : 500nsec/div
5Vp-p
H : 10µsec/div
5Vp-p
5 Vp-p
3 TP1- Pin 6 :
PLAY MODE (FOER) H : 10msec/div
0.2Vp-p
6 IC202- Pin 4 :
H : 1msec/div
16 IC301- Pin 22 :
50T-JUMP(1) MODE (TRDR)
PLAY MODE (1kHz) (BCLK) H : 500nsec/div
54 IC341- Pin 7:
PLAY MODE (1 kHz) (BCKO) H : 0.2 µsec/div
5 Vp-p
60 IC401- Pin 28 :
PLAY MODE (1 kHz) (DLAT) H : 0.2 µsec/div
5 Vp-p
1.5Vp-p
5Vp-p
4 TP1- Pin 2 :
PLAY MODE (TRER) H : 10msec/div
0.3Vp-p
7 IC302- Pin 1 :
18 IC301- Pin 20 :
PLAY MODE (SPDR) H : 50msec/div
PLAY MODE (1kHz) (LRCK) H : 10µsec/div
55 IC341- Pin 5 :
65 IC401- Pin 16 :
PLAY MODE (1 kHz) (LRCKO) H : 10 µsec/div
PLAY MODE (1 kHz) H : 0.2 msec/div
3.2 Vp-p
1Vp-p
5Vp-p
5 Vp-p
4 TP1- Pin 2 :
50T- JUMP(1)MODE (TRER) H : 1msec/div
0.7Vp-p
7 IC302- Pin 1 :
19 IC301- Pin 21 :
PLAY MODE (1kHz) (DATA) H : 500nsec/div
5Vp-p
TRACK SEARCH MODE (SPDR) H : 50msec/div
7.2Vp-p
56 IC341- Pin 8 :
PLAY MODE (1 kHz) (DATAO) H : 0.2 µsec/div
5 Vp-p
5 IC202- Pin 3 :
8 IC202- Pin 9 :
H : 2sec/div
FOCUS-IN(2) MODE (FODR) H : 200msec/div
1.4Vp-p
PLAY MODE (CADR)
23 TRACK SEARCH MODE
Upper:TP1-Pin1(RF) Lower:IC151-Pin 23 (C.OUT) H : 200µsec/div 1Vp-p
0.3Vp-p
5Vp-p
16
1
2
3
4
PD-S507
4. PCB CONNECTION DIAGRAM
NOTE FOR PCB DIAGRAMS:
1. Part numbers in PCB diagrams match those in the schematic diagrams. 2. A comparison between the main parts of PCB and schematic diagrams is shown below.
Symbol in PCB Diagrams Symbol in Schematic Diagrams Part Name
A
Symbol in PCB Diagrams Symbol in Schematic Diagrams Part Name
D D G S
G
S D
G
S Field effect transistor
3. The parts mounted on this PCB include all necessary parts for several destination. For further information for respective destinations, be sure to check with the schematic diagram.
B B C E
C
E B
C
E Transistor
4. Viewpoint of PCB diagrams
Connector Capacitor
SIDE A
Resistor array B C E B C E Transistor with resistor 3-terminal regulator
P. C. Board Chip Part
B C E
SIDE B
4.1 PHONE BOARD ASSY and MECHANISM BOARD ASSY SIDE A
A
MECHANISM BOARD ASSY
PWX1192 S610
SPINDLE MOTOR INSIDE
CARRIAGE MOTOR
B
CMK54XT M 1 4
M
CN610
B
CN202
C
SIDE A
SIDE B
C
PHONE BOARD ASSY
C
PHONE BOARD ASSY
B
CN501 (PNP1448-C)
D
1
2
3
A C
4
17
1
2
3
4
PD-S507 4.2 MAIN BOARD ASSY and COAXIAL OUTPUT ASSY
B
A
SIDE A
MAIN BOARD ASSY
Q391 IC406
Q403 Q404
E
J11
IC20
Q23 IC341 IC405 IC33
B
IC34
D
COAXIAL OUTPUT ASSY
Q151
C
VR153
(PD-S507/MVXK Only) To Pickup Assy
VR154 IC202 VR155 VR151 VR152 VR156
A
CN610 To Loading Motor and S601
D
IC201
C J501 F
CN701 (PNP1448C)
18
B D
1
2
3
4
1
2
3
4
PD-S507
B
SIDE B
MAIN BOARD ASSY
A
IC341 Q22 Q21
Q452 Q451 Q405 IC302 IC401 IC301
B
Q152
IC151
C
(PNP1448C)
D
1
2
3
4
B
19
1
2
3
4
PD-S507
4.3 POWER BOARD ASSY
A
SIDE A
NEUTRAL LIVE
E
POWER BOARD ASSY
AC POWER CORD
B
Q53
Q52
C
B
CN11
Q54 Q51
(PNP1448-C)
D
20
E F
1
2
3
4
1
2
3
4
PD-S507
SIDE B
A
E
POWER BOARD ASSY
B
C
(PNP1448-C)
Q55 Q56
D
1
2
3
4
E
21
1
2
3
4
PD-S507 4.4 SWITCH BOARD ASSY and MODE BOARD ASSY SIDE A
F
A
SWITCH BOARD ASSY
G
MODE BOARD ASSY
IC702
B
C
IC701
B
D
CN351
(PNP1448-C)
22
F G
1
2
3
4
1
2
3
4
PD-S507 SIDE B
F
SWITCH BOARD ASSY
G
MODE BOARD ASSY
A
B
C
IC701
IC703
D
(PNP1448-C)
1
2
3
F G
4
23
PD-S507
5. PCB PARTS LIST
NOTES : ÷ Parts marked by " NSP " are generally unavailable because they are not in our Master Spare Parts List. mark found on some component parts indicates the importance of the safety factor of the part. ÷ The Therefore, when replacing, be sure to use parts of identical designation. ÷ When ordering resistors, first convert resistance values into code form as shown in the following examples. Ex. 1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by J = 5%, and K = 10%). 560 = 56 × 10 1 = 561 ................................................... RD1/4PU 5 6 1 J 47k = 47 × 10 3 = 473 .................................................. RD1/4PU 4 7 3 J 0.5 = R50 ...................................................................... RN2H Â 5 0 K 1 = 1R0 ......................................................................... RS1P 1 Â 0 K Ex. 2 When there are 3 effective digits (such as in high precision metal film resistors). 5.62k = 562 × 10 1 = 5621 ........................................... RN1/4PC 5 6 2 1 F
LIST OF WHOLE PCB ASSEMBLIES
Part No. Mark
NSP
Symbol and Description MYXK
MOTHER BOARD ASSY MAIN BOARD ASSY POWER BOARD ASSY SWITCH BOARD ASSY MODE BOARD ASSY PHONE BOARD ASSY COAXIAL BOARD ASSY LOADING MECHANISM ASSY T96 SERVO MECHA BOARD ASSY T96 MECHANISM BOARD ASSY PWM2240 PWZ3762 PWZ3770 PWZ3766 PWZ3768 PWZ3773 Not used PXA1604 PXA1606 PWX1192
Remarks MVXK
PWM2241 PWZ3763 PWZ3770 PWZ3766 PWZ3768 PWZ3773 PWZ3775 PXA1604 PXA1606 PWX1192
NSP NSP NSP NSP
MVXK Only
CONTRAST OF PCB ASSEMBLIES
MAIN BOARD Assy
PWZ3762and PWZ3763 are constructed the same except for the following:
Part No. Mark Symbol and Description PWZ3762
R 321 R 322 R 323 CN 331(3P JUMPER CONNECTOR) RS1/10S102J RS1/10S0R0J RS1/10S152J Not used
Remarks PWZ3763
RS1/10S471J RS1/10S152J RS1/10S302J 52147-0310
24
PD-S507 PARTS LIST FOR PD-S507/MVXK
Mark No. Description Part No. Mark No. Description Part No.
CKSQYB473K50 CKSQYB682K50 CKSQYB823K25 CKSQYF103Z50 CKSQYF103Z50 CKSQYF103Z50 CKSQYF104Z25 CKSQYF104Z25 CKSQYF473Z50 CQMA154Z50 CQMBA102J50 CQMBA103J50 CQMBA152J50 PCH1119 PCH1122 PCH1124
MOTHER BOARD ASSY
OTHERS
PC Board (MOTHER) PNP1448
B MAIN BOARD ASSY
SEMICONDUCTORS
IC151 IC301 IC33, IC34 IC201 IC202 IC406 IC461 IC405 IC302 IC341 IC401 IC20 Q151 Q391 Q23 Q403, Q404 Q152, Q22, Q451 Q21, Q405, Q452 D397, D497, D498 D406 D409 D395 D1496 D23 D218 CXA1782CQ CXD2507AQ ICP-N10 LA6517 LA6520 M5218AP NJM2930L05 NJM4558D-D NJM4565M PD0236AM PE8001A PQ05RA1 2SA854S 2SC1740S 2SC3068 2SD2144S DTA124EK DTC124EK 1SS355 DA204K DAP202K S5566G(TPB2) UDZS5.6B UDZS6.8B
C152, C307 C151 C157 C172, C185, C205, C210, C215 C219, C24, C305, C316, C325 C343, C344, C409, C421 C22, C28, C310 C312, C321 C342, C412, C413, C416, C417 C351 C175, C301, C302 C441, C442 C497, C498 C435 C440 C25, C26 (4700µF/16V) C303, C341, C411(1000µF/16V) C429, C430 (47µF/50V)
C171, C432, C433 (100µF/50V) PCH1126 C169, C170, C474, C475 (4.7µF/50V) PCH1127 C131,C200,C201,C211,C212 (220µF/25V) PCH1128 C216, C217,C27, C322,C444 (220µF/25V) PCH1128 C446, C461, C496 (220µF/25V) PCH1128
RESISTORS
R496 R163, R164, R470, R471 R1447 R1450 R451, R452 R433 R436 R431, R432 VR153, VR155 (10k- B) VR151, VR152, VR154 (22k- B) VR156 (220k- B) Other Resistors RD1/2VM152J RD1/4VM470J RD1/4VM471J RDR1/2PM101J RN1/10SE1002D RN1/10SE2702D VCP1156 VCP1158 VCP1164 RS1/10S&&&J
COILS AND FILTERS
L151, L301 L303 L393 L395, L396 L321 L21 (RADIAL INDUCTOR) (RADIAL INDUCTOR) (RADIAL INDUCTOR) (RADIAL INDUCTOR) (COIL 0.15mH) (Noise filter) LFA100J LFA151J LFA1R0J LFA1R0J RTF1168 RTF1167
OTHERS
CN202 CN205 CN331 CN501 CN351 JA321 CN11 JA401 JA393 X401 CN201 CN131 MT 4P CONNECTOR MT 5P CONNECTOR 3P JUMPER CONNECTOR 4P JUMPER CONNECTOR 26P FFC CONNECTOR OPTICAL LINK OUT 7P JUMPER CONNECTOR 2P JACK JACK XTAL RES (16.9344 MHz) CONNECTOR 6P CONNECTOR PCB BINDER 173981-4 173981-5 52147-0310 52147-0410 HLEM26S-1 GP1F32T KPD7 PKB1023 PKN1005 PSS1008 RKP-533 SLW16S-1C7 VEF1040
CAPACITORS
C181 C318 C395, C396 C407, C408 C403 C404 C410 C23, C414, C415 C309 C163, C401 C156, C159, C161, C164, C168 C191, C192, C308 C153- C155, C158, C320 C176, C218, C306 C221, C222 C315 C162 C160 C167 CCSQCH100D50 CCSQCH101J50 CCSQCH101J50 CCSQCH101J50 CCSQCH240J50 CCSQCH300J50 CEGA470M25 CEGA4R7M50 CFTLA474J50 CKSQYB102K50 CKSQYB103K50 CKSQYB103K50 CKSQYB104K25 CKSQYB152K50 CKSQYB182K50 CKSQYB221K50 CKSQYB332K50 CKSQYB333K50 CKSQYB472K50
E
POWER BOARD ASSY
Q51 Q52, Q53 Q54 Q55, Q56 D56 D11 D14, D52 D53 D54, D55 D57 2SC1815 2SC3068 2SC3068 DTC124EK 1SS355 S5566G(TPB2) UDZS5.6B UDZS6.2B UDZS6.8B
SEMICONDUCTORS
25
PD-S507
Mark No.
Description
Part No.
Mark No.
Description
Part No.
COILS AND FILTERS
L1110 (FERRITE BEADS) L1108 (FERRITE BEADS) PTH1014 PTH1016
RESISTORS
All Resistors RS1/10S&&&J
CAPACITORS
C53 C18, C19 C51 C34 C11, C15- C17 C1012, C1020 C52 (100 µF/50V) CEGA4R7M50 CEZA2R2M50 CEZA470M25 CKSQYF103Z50 CKSQYF473Z50 CQMBA103J50 PCH1126
OTHERS
J751 4P CABLE HOLDER 4P JUMPER WIRE 51048-0400 D20PDY0410E
C PHONE BOARD ASSY
COILS AND FILTERS
L502, L503 L504 (Coil 1µH) (Noise filter) LFA1R0J RTF1167
RESISTORS
R52, R53 R15 Other Resistors RD1/2VM102J RD1/4VM100J RS1/10S&&&J
CAPACITORS
C501 CKSQYF103Z25
RESISTORS
VR501 (500B) RCV1123
OTHERS
TP52 1P TERMINAL TERMINAL PCB BINDER 7P CABLE HOLDER 7P JUMPER WIRE RKC-059 RKC-061 VEF1040 51052- 0700 DYY07-200-2651
OTHERS
J501 JA501 4P CABLE HOLDER 4P JUMPER WIRE JACK 51048-0400 D20PDY0406B RKN1002
J11
F
SWITCH BOARD ASSY
IC701 IC703 PD4998B PST572E
A MECHANISM BOARD ASSY
SWITCHES
S610 DSG1016
SEMICONDUCTORS
OTHERS
CN610 MT CONNECTOR 4P 173979-4
COILS AND FILTERS
L701 L704 L702, L703 LFA100J LFA151J LFA1R0J
D COAXIAL BOARD ASSY
SEMICONDUCTORS
IC331 TC74HCU04F
SWITCHES
S701S704, S710, S711 ASG1034
CAPACITORS
C711 C701, C706 C703 C705, C707 C710 C702 (220 µF/25V) CFTLA104J50 CFTLA274J50 CKSQYF103Z25 PCH1128
COILS AND FILTERS
L334 (COIL) PTL1003
CAPACITORS
C335 C339 C334, C336 C333 (220 µF/25V) CEAT470M25 CKSQYF103Z50 CKSQYF104Z25 PCH1128
RESISTORS
All Resistors RS1/10S&&&J
OTHERS
CN751 CN701 V701 X701 4P JUMPER CONNECTOR REMOTE RECEIVER UNIT 26P FFC CONNECTOR FL INDICATOR TUBE CERAMIC RESONA(4.19 MHz) 52151-0410 GP1U27X HLEM26R-1 PEL1085 VSS1028
RESISTORS
All Resistors RS1/10S&&&J
OTHERS
J331 JA331 3P CABLE HOLDER 3P JUMPER WIRE 1P JACK 51048-0300 D20PDY0310E RKB1019
G MODE BOARD ASSY
SEMICONDUCTORS
D751 LED (RED) PCX1019
SWITCHES
S751S755 ASG1034
26
PD-S507
6. ADJUSTMENT
6.1 PREPARATIONS
6.1.1 Jigs and Measuring Instruments
39 k 0.001µF
CD TEST DISC (YEDS-7)
screwdriver (small)
screwdriver (medium)
screwdriver (large)
Low pass filter 1 (39 k + 0.001µF)
56 k 0.001µF Dual-trace oscilloscope (10 : 1 probe)
Precise screwdriver
Ball point hexagon wrench (size: 1.5mm) GGK1002
Low-frequency oscillator
Low pass filter 2 (56 k + 0.001µF)
6.1.2 Necessary Adjustment Points
When Exchange Adjustment points
PICKUP
1.2.3.4.5.6.7. = Page 29 - 34 8.9.10.11.12
Exchange
MAIN BOARD ASSY
1.3.5.6.7.8. 9.10.11.12
= Page 29 - 34
Exchange
SERVO MECH ASSY
1.2.3.4.5.6.7. = Page 29 - 34 8.9.10.11.12
Exchange
SPINDLE MOTOR
ADJ = Page 8
27
PD-S507
6.2 ADJUSTMENT
6.2.1 How to Start/Cancel Test Mode
TEST MODE : ON
TEST MODE W384 W385 Short point TEST MODE W384 W385 Short point
MAIN BOARD ASSY
MAIN BOARD ASSY
TEST MODE : PLAY
TEST DISC: YEDS-7
1
¡
EDIT
inwards
outwards
Pickup Move
Laser diode: LIGHTS UP Focus servo: CLOSE
Spindle motor: START Spindle servo: CLOSE
TEST MODE : STOP = CANCEL
OPEN CLOSE Tracking servo: Stop all operation
6.2.2 Adjustment Location
(REAR)
ADJUSTMENT SCREW (Tangential tilt direction)
MAIN BOARD ASSY
VR151. TR GAIN VR152. FO GAIN VR153. RF LEVEL CN201
VR154. FO OFFSET VR155. TR BAL VR156. FO BEST TP1 6. FO. ER 5. FO. IN 4. VC 3. TR. IN 2. TR. ER 1. RF
ADJUSTMENT SCREW (Radial direction)
VR151
VR153 VR155 VR154 VR152
TP 1
PICKUP ASSY
W384 W385
VR156
TEST
(FRONT)
28
PD-S507
6.2.3 Check and Adjustment
1. Focus Offset Adjustment
Test mode None disc
VR154
MAIN BOARD ASSY
DC voltage 0±50mV
Oscilloscope
DC Mode V: 5mV/div H: 10mSec/div
START
TP1 (CN201)
FE VC
Player
Prove (10:1)
6 4
GND
MAIN BOARD ASSY
2. Grating Adjustment
Turn counterclockwise from null. Test mode SPDL servo = CLOSE FOCUS servo = CLOSE TRKG servo = OPEN
TEST DISC
Locate null.
Counterclockwise, Maximum amplitude. Innermost circumference (1 TRK) PICKUP
PLAY
Oscilloscope
DC Mode V: 10mV/div H: 5mSec/div
START
TP1 (CN201)
TE VC
Player Low pass filter 1
Prove (10:1) 39k 0.001µF
MAIN BOARD ASSY
GND
2 4
29
PD-S507
3. Tracking Error Barance Adjustment
Test mode SPDL servo = CLOSE FOCUS servo = CLOSE TRKG servo = OPEN
TEST DISC
A=B
A VC
PLAY
Innermost circumference (1 TRK)
VR155
MAIN BOARD ASSY
B
Oscilloscope
START
TP1 (CN201)
TE VC
Player Low pass filter 1
Probe (10:1) 39k 0.001µF
DC Mode V: 10mV/div H: 5mSec/div
MAIN BOARD ASSY
4. Pickup 1Radial/ 2Tangential Direction Tilt Adjustment
Test mode SPDL servo = CLOSE FOCUS servo = CLOSE TRKG servo = CLOSE
TEST DISC
GND
2 4
NG 1
TEST DISC
2
1 2
PLAY Position where the screw is visible through the adjustment hole of the float base after moving toward the outer peripheral. Eye pattern Remove lock tight
OK (Smooth)
Oscilloscope
AC Mode V: 20mV/div H: 200nSec/div
START
TP1 (CN201)
RF VC
Player
Probe (10:1)
1 4
GND
MAIN BOARD ASSY
30
PD-S507
5. RF Level Adjustment
Test mode SPDL servo = CLOSE FOCUS servo = CLOSE TRKG servo = CLOSE
TEST DISC
1.2VP-P ±0.1V
PLAY
Innermost circumference (1 TRK)
VR153
MAIN BOARD ASSY
Oscilloscope
AC Mode V: 50mV/div H: 10mSec/div
START
Player TP1 (CN201)
Prove (10:1)
RF VC
1 4
GND
MAIN BOARD ASSY
6. Focus Best Adjustment
Test mode SPDL servo = CLOSE FOCUS servo = CLOSE TRKG servo = CLOSE
TEST DISC
MAX
PLAY
Innermost circumference (1 TRK)
VR156
MAIN BOARD ASSY
Adjust the RF level to maximum, with the focus error voltage within ±150mV.
Oscilloscope
DC Mode CH1: 5mV/div CH2: 20mV/div H: 200ns/div Prove(10:1)
START
TP1 (CN201)
FE RF VC
Player
GND
GND
6 1 4
Prove(10:1)
MAIN BOARD ASSY
31
PD-S507
7. RF Level Adjustment
Check
Test mode SPDL servo = CLOSE FOCUS servo = CLOSE TRKG servo = CLOSE
TEST DISC
1.2VP-P ±0.1V
Innermost circumference PLAY (1 TRK)
VR153
MAIN BOARD ASSY
Make adjustment if the value exceeds the specified range.
Oscilloscope
AC Mode V: 50mV/div H: 10mSec/div
START
Player TP1 (CN201)
Prove (10:1) GND
RF VC
1 4
MAIN BOARD ASSY
8. Focus Servo Loop Gain Adjustment
UNDER Test mode SPDL servo = CLOSE FOCUS servo = CLOSE TRKG servo = CLOSE
TEST DISC
UPPER
Innermost circumference PLAY (1 TRK)
VR152
MAIN BOARD ASSY
JUST Lissajous Waveform
Oscilloscope
X-Y Mode X: 20mV/div Y: 5mV/div
START
TP1 (CN201)
FE FI VC
Player
Prove (10:1)
Low-frequency oscillator
1.2kHz 1Vp-p
GND
56k 100k 0.001µF
Prove (10:1)
6 5 4
MAIN BOARD ASSY
GND
GND
Low pass filter 2
32
PD-S507
9. Focus Best Adjustment
Test mode SPDL servo = CLOSE FOCUS servo = CLOSE TRKG servo = CLOSE
TEST DISC
MAX
Innermost circumference PLAY (1 TRK)
VR156
MAIN BOARD ASSY
Adjust the RF level to maximum, with the focus error voltage within ±150mV.
Oscilloscope
DC Mode CH1: 5mV/div CH2: 20mV/div H: 200ns/div Prove (10:1)
START
TP1 (CN201)
FE RF VC
Player
GND
GND
6 1 4
Prove (10:1)
MAIN BOARD ASSY
10. Focus Servo Loop Gain Adjustment
Check
UNDER Test mode SPDL servo = CLOSE FOCUS servo = CLOSE TRKG servo = CLOSE
TEST DISC
UPPER
Innermost circumference PLAY (1 TRK)
VR152
MAIN BOARD ASSY
JUST Lissajous Waveform
Oscilloscope
Readjust if adjustment is incorrect. X-Y Mode X: 20mV/div Y: 5mV/div
START
TP1 (CN201)
FE FI VC
Player
Prove (10:1)
Low-frequency oscillator
1.2kHz 1Vp-p
GND
56k 100k 0.001µF
Prove (10:1)
6 5 4
MAIN BOARD ASSY
GND
GND
Low pass filter 2
33
PD-S507
11. Focus Best Adjustment
Adjust this point only if adjustment was made in item 10.
Test mode SPDL servo = CLOSE FOCUS servo = CLOSE TRKG servo = CLOSE
TEST DISC
MAX
Innermost circumference PLAY (1 TRK)
VR156
MAIN BOARD ASSY
Adjust the RF level to maximum, with the focus error voltage within ±150mV.
Oscilloscope
START
TP1 (CN201)
FE RF VC
Player
Prove (10:1)
DC Mode CH1: 5mV/div CH2: 20mV/div H: 200ns/div
GND
GND
6 1 4
Prove (10:1)
MAIN BOARD ASSY
12. Tracking Servo Loop Gain Adjustment
UNDER Test mode SPDL servo = CLOSE FOCUS servo = CLOSE TRKG servo = CLOSE
TEST DISC
UPPER
Innermost circumference PLAY (1 TRK)
VR151
MAIN BOARD ASSY
JUST Lissajous Waveform
Oscilloscope
X-Y Mode X: 20mV/div Y: 10mV/div
START
TP1 (CN201)
TE TI VC
Player
Prove (10:1)
Low-frequency oscillator
1.2kHz 1Vp-p
GND
100k
Prove (10:1)
2 3 4
MAIN BOARD ASSY
GND
GND
34
PD-S507
7. GENERAL INFORMATION
7.1 IC
7 PE8001A (IC401: MAIN BOARD ASSY)
7 D/A CONVERTER IC
13 VOUTR 16 VOUTL
¶ The information shown in the list is basic information and may not correspond exactly to that shown in the schematic diagrams.
¶ Pin Arrangement
¶ Block Diagram
PE8001A
Low-pass Filter AGND2L AGND2R VCC2L VCC2R Open drain
LRCK 1 DATA 2 BCK 3 CLKO 4 XTI 5 XTO 6 DGNO 7 VDD
8
28 ML/IIS 27 MC/DM1 26 MD/DM0 25 MUTE 24 MODE 23 CS/IWO 22 RST 21 ZERO
9
10
Low-pass Filter
21 ZERO
11 EXTR
18 EXTL
Function Controller
8X Oversampling
Digital Filter
VCC2R 9 AGND2R 10 EXTR 11 NC 12 VOUTR 13 AGND1 14
20 VCC2L 19 AGND2L 18 EXTL 17 NC 16 VOUTL
lnput
BPZ-Cout
Crystal OSC
with
Control
I/F
Mode
(Top View)
ML/IIS 28 MD/DM0 26 CS/IWO 23 MODE 24 MUTE 25 MC/DM1 27 LRCK 1 DATA 2 BCK 3 RST 22
¶ Pin Function
No.
1 2 3 4 5 6 7 8 9
Name
LRCK DATA BCK CLKO XTI XTO DGND VDD VCC2R
I/O
I I I O I O O O
Description
LRCK Clock Input (fs) Serial Audio Data Input Data bit clock Input Buffer output of System clock. Oscillator Input / External clock Input Oscillator Output Digital GND +5V Digital Power Supply +5V Analog Power Supply Analog GND Rch, Common Pin of Analog output Amp. Not connect Rch, Analog Voltage output of Audio signal Analog GND
No.
15 16 17 18
Name
VCC1 VOUTL NC EXTL
I/O
O O O
Description
+5V Analog Power Supply Lch, Common Pin of Analog output Amp. Not connect Lch, Analog Voltage output of Audio signal Analog GND +5V Analog Power Supply Zerodata. flag
19 AGND2L 20 21 22 23 24 25 VCC2L ZERO RST CS/IWO MODE MUTE
l Reset. "L"at reset DF and modulator I I I I I I Chip select / lnput format. select Mode control select (H: Software, L: Hardware) Mute control Mode control data / De-emphasis selection Mode control BCK / De-emphasis selection Mode control WDEK / Input format selection
10 AGND2R 11 12 13 14 EXTR NC VOUTR AGND1
26 MD/DM0 27 MC/DM1 28 ML/IIS
I/F
15 VCC1
Serial
SCK
XTI
5
XTO
6
VDD CLKO VCC1 AGND1 DGND
19
DAC
DAC
20
Power Supply
Delta-Sigma
Multi-level
Modulator
4
15
14
8
7
35
PD-S507
7.2 DISPLAY
7 PEL1085 (V701: SWITCH BOARD ASSY)
7 FL INDICATOR TUBE ¶ Pin Assignment
¶ Pin Connection
¶ Grid Assignment
¶ Anode Connection
36
PD-S507/MVXK Only
DIGITAL OUT (COAXIAL) DIGITAL OUT (OPTICAL)
·
7.3 BLOCK DIAGRAM
MAIN BOARD ASSY
PICKUP Assembly
SERVO CONTROLLER (IC151) CXA1782CQ DECODER (IC301) CXD2507AQ Hi-bit (IC341) PD0236AD DAC (IC401) PE8001A
LPF (IC405) NJM4558DX
LINE OUT
X 'tal (X401) 16.9344 MHz AMP CPU (IC701) PD4998B
HEADPHONE AMP (IC406) M5216P
¶ Focus ¶ Tracking
M
¶ Spindle ¶ Carriage ¶ Loading
IC201 LA6517 IC202 LA6520 DISPLAY FUNCTION KEY
POWER SUPPLY HEADPHONE JACK
SWITCH BOARD ASSY
POWER BOARD ASSY
PHONE BOARD ASSY
PD-S507
37
PD-S507
8. PANEL FACILITIES AND SPECIFICATIONS
7 PANEL FACILITIES
1 6 8 !
2 3
FRONT PANEL STANDBY/ON switch and STANDBY 1 indicator 2 REPEAT button 3 HI-LITE button 4 COMPU/AUTO EDIT button (· COMPU/·· AUTO) 5 DISPLAY button 6 Remote sensor
Receives the signal from the remote control unit.
5 4
7 9 PD-S507 FRONT PANEL 0 =
~
7 8 9 0 -
Disc tray OPEN/CLOSE button (0) Play button (3) Pause button (8) Track/Manual search buttons (41/¡¢) = Stop button (7) ~ Headphones jack ! Headphones volume control (LEVEL) REMOTE CONTROL UNIT
Remote control buttons with the same names or marks as buttons on the front panel of the player control the same operations as the corresponding front panel buttons.
1 Random play button (RDM) 2 Program button (PGM) 3 Track number/Digit buttons (1 - 10, >10) 4 Play button ( 3 ) 5 Pause button ( 8 ) 6 Power standby/on button ( ) 7 OUTPUT LEVEL buttons (/+) 8 Stop button ( 7 ) 9 Manual search buttons ( 1 / ¡ ) 0 Track search buttons ( 4 / ¢ )
REMOTE CONTROL UNIT
38
PD-S507
7 SPECIFICATIONS
1. General
Type ......................................... Compact disc digital audio system Power requirements ................................ AC 220 - 230 V, 50/60 Hz Power consumption ................................................................. 13 W Power consumption in standby mode ....................................... 3 W Operating temperature ............................................... +5°C - +35°C Weight ................................................................................... 3.8 kg External dimensions ...................... 420 (W) X 283 (D) X 112 (H) mm
2. Audio section
Frequency response ................................................. 2 Hz - 20 kHz S/N ratio ....................................................... 110 dB or more (EIAJ) Dynamic range ....................................... 99 dB or more (EIAJ) Harmonic distortion ....................................... 0.002% or less (EIAJ) Output voltage ....................................................................... 2.0 V Wow and flutter .......................................... Limit of measurement (±0.001% W.PEAK) or less (EIAJ) Channels ............................................................ 2-channel (stereo)
3. Output terminal
Audio line output jacks CD·DECK SYNCHRO jack Optical digital output jack Coaxial digital output jack (MVXK model only) Headphone jack (with volume control)
4. Accessories
÷ ÷ ÷ ÷ Remote control unit ................................................................. Size AAA/R03 dry cell batteries ............................................... Output cable ............................................................................ Operating instructions .............................................................. 1 2 1 1
NOTE: Specifications and design subject to possible modification without notice, due to improvements.
Accessories
Output cable x 1 (L=1.2m : PDE1248)
Remote control unit x 1 (CU-PD096) AAA/R03 dry cell batteries x 2
39