Text preview for : Yamaha-RXN600 rec.pdf part of Yamaha RXN600 receiver



Back to : Yamaha-RXN600 rec.part1.r | Home

AV RECEIVER/AV AMPLIFIER
RX-N600/RX-N600D/HTR-N5060
DSP-N600
SERVICE MANUAL




IMPORTANT NOTICE
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already
known and understood by the users, and have therefore not been restated.
WARNING: Failure to follow appropriate service and safety procedures when servicing this product may result in personal
injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons,
we advise all YAMAHA product owners that any service required should be performed by an authorized
YAMAHA Retailer or the appointed service representative.
IMPORTANT: The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and
service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable
and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please
contact the distributor's Service Division.
WARNING: Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
IMPORTANT: Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.




HTR-N5060/DSP-N600
RX-N600/RX-N600D/
I CONTENTS
TO SERVICE PERSONNEL ...................................... 2­3 AMP ADJUSTMENT ........................... 51
FRONT PANELS ........................................................ 3­4 DISPLAY DATA ..................................................... 52­55
REAR PANELS .......................................................... 5­8 IC DATA ................................................................. 56­69
REMOTE CONTROL PANELS ...................................... 9 PIN CONNECTION DIAGRAMS ............................ 70­71
SPECIFICATIONS ................................ 10­12 BLOCK DIAGRAMS .............................................. 72­75
INTERNAL VIEW ......................................................... 13 PRINTED CIRCUIT BOARDS ................................ 76­95
DISASSEMBLY PROCEDURES ......... 14­20 SCHEMATIC DIAGRAMS .................................... 97­108
UPDATING FIRMWARE REPLACEMENT PARTS LIST .......................... 109­138
.................................. 21­24 REMOTE CONTROL .................................................. 139
SELF DIAGNOSIS FUNCTION (DIAG) ADVANCED SETUP .......................................... 140­141
...................................... 25­50




101007 2006 All rights reserved.
This manual is copyrighted by YAMAHA and may not be copied or
redistributed either in print or electronically without permission.
P.O.Box 1, Hamamatsu, Japan
'06.06
RX-N600/RX-N600D/HTR-N5060/
DSP-N600



I TO SERVICE PERSONNEL AC LEAKAGE
WALL EQUIPMENT TESTER OR
1. Critical Components Information OUTLET UNDER TEST EQUIVALENT
Components having special characteristics are marked s
and must be replaced with parts having specifications equal
to those originally installed.
2. Leakage Current Measurement (For 120V Models Only)
When service has been completed, it is imperative to verify
that all exposed conductive surfaces are properly insulated INSULATING
from supply circuits. TABLE
G Meter impedance should be equivalent to 1500 ohms G Leakage current must not exceed 0.5mA.
shunted by 0.15µF.
G Be sure to test for leakage with the AC plug in both polarities.

"CAUTION"
"F3000, 3001: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE
8A, 125V FUSE."
CAUTION
F3000, 3001: REPLACE WITH SAME TYPE 8A, 125V FUSE.
ATTENTION
F3000, 3001: UTILISER UN FUSIBLE DE RECHANGE DE MEME TYPE DE 8A, 125V.




WARNING: CHEMICAL CONTENT NOTICE!
The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or plastic (where
applicable) components may also contain traces of chemicals found by the California Health and Welfare Agency (and
possibly other entities) to cause cancer and/or birth defects or other reproductive harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REA-
SON WHATSOEVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose
eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before
handling food.
HTR-N5060/DSP-N600
RX-N600/RX-N600D/




About Lead Free Solder /
All of the P.C.B.s installed in this unit are soldered using
the lead free solder.
Among some types of lead free solder currently available,
it is recommended to use one of the following types for the
repair work.
· Sn + Ag + Cu (tin + silver + copper)
· Sn + Cu (tin + copper)
· Sn + Zn + Bi (tin + zinc + bismuth)

Caution:
As the melting point temperature of the lead free solder is
about 30°C to 40°C (50°F to 70°F) higher than that of the lead
solder, be sure to use a soldering iron suitable to each solder.




2
RX-N600/RX-N600D/HTR-N5060/
DSP-N600



I FRONT PANELS
RX-N600 (U, C models)




RX-N600 (R, T, K, A, G, E models)




HTR-N5060/DSP-N600
RX-N600/RX-N600D/
RX-N600D (B model)




3
RX-N600/RX-N600D/HTR-N5060/
DSP-N600


HTR-N5060 (U, C models)




HTR-N5060 (A, G models)
HTR-N5060/DSP-N600
RX-N600/RX-N600D/




DSP-N600 (J model)




4
RX-N600/RX-N600D/HTR-N5060/
DSP-N600



I REAR PANELS
RX-N600 (U, C models)




RX-N600 (R model)




HTR-N5060/DSP-N600
RX-N600/RX-N600D/
RX-N600 (T model)




5
RX-N600/RX-N600D/HTR-N5060/
DSP-N600


RX-N600 (K model)




RX-N600 (A model)
HTR-N5060/DSP-N600
RX-N600/RX-N600D/




RX-N600 (G, E models)




6
RX-N600/RX-N600D/HTR-N5060/
DSP-N600


RX-N600D (B model)




HTR-N5060 (U, C models)




HTR-N5060/DSP-N600
RX-N600/RX-N600D/
HTR-N5060 (A model)




7
RX-N600/RX-N600D/HTR-N5060/
DSP-N600


HTR-N5060 (G model)




DSP-N600 (J model)
HTR-N5060/DSP-N600
RX-N600/RX-N600D/




8
RX-N600/RX-N600D/HTR-N5060/
DSP-N600



I REMOTE CONTROL PANELS
RX-N600 (U, C models) RX-N600 (R, T, K, A, G, E models)
HTR-N5060 (U, C models) RX-N600D (B model)
HTR-N5060 (A, G models)
DSP-N600 (J model)




HTR-N5060/DSP-N600
RX-N600/RX-N600D/




9
RX-N600/RX-N600D/HTR-N5060/
DSP-N600



I SPECIFICATIONS /
I Audio Section /
Minimum RMS Output Power / Rated Output Voltage/Output Impedance /
[RX-N600/RX-N600D]
(20 Hz to 20 kHz, 0.06 % THD, 8 ohms) OUT (REC) .................................................... 200 mV / 1.2 k-ohms
FRONT L/R ................................................................. 95 W + 95 W SUBWOOFER (2ch STEREO and FRONT SP: Small)
CENTER ................................................................................. 95 W ........................................................................ 4 V / 1.2 k-ohms
SURROUND L/R ........................................................ 95 W + 95 W [RX-N600/RX-N600D/DSP-N600]
SURROUND BACK ................................................................ 95 W ZONE2 OUT .................................................. 200 mV / 1.2 k-ohms
[HTR-N5060] Headphone Jack Rated Output Voltage/Impedance /
(1 kHz, 0.7 % THD, 8 ohms)
FRONT L/R ............................................................ 110 W + 110 W CD, etc. (Input 1 kHz, 50 mV, 8 ohms) ........... 150 mV / 100 ohms
CENTER ............................................................................... 110 W Channel Separation /
SURROUND L/R ................................................... 110 W + 110 W CD, etc. (Input 5.1 k-ohms shorted, 1 kHz/10 kHz)
SURROUND BACK .............................................................. 110 W ................................................... 60 dB or more/45 dB or more
[DSP-N600] Volume Control /
(20 Hz to 20 kHz, 0.09 % THD, 6 ohms) ........................................... MUTE/-80 dB to +16 dB/1 dB step
FRONT L/R ................................................................. 95 W + 95 W Tone Control Characteristics /
CENTER ................................................................................. 95 W (FRONT L/R)
SURROUND L/R ........................................................ 95 W + 95 W BASS
SURROUND BACK ................................................................ 95 W Boost/Cut ............................................ ±10 dB/2 dB step (60 Hz)
Maximum Useful Output Power / (EIAJ) TREBLE
[RX-N600] (R, T, K models) Boost/Cut ........................................... ±10 dB/2 dB step (20 kHz)
(1 kHz, 10 % THD, 8 ohms) Filter Characteristics /
FRONT L/R ........................................................................... 135 W FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK
CENTER ............................................................................... 135 W Small (H.P.F.)
SURROUND L/R .................................................................. 135 W ............ fc= 40/60/80/90/100/110/120/160/200 Hz / 12 dB/oct.
SURROUND BACK .............................................................. 135 W SUBWOOFER (L.P.F.)
[DSP-N600] (J model) ............ fc= 40/60/80/90/100/110/120/160/200 Hz / 24 dB/oct.
(1 kHz, 10 % THD, 6 ohms)
FRONT L/R ........................................................................... 135 W I Video Section
CENTER ............................................................................... 135 W
SURROUND L/R .................................................................. 135 W Video Format (Gray Back) /
SURROUND BACK .............................................................. 135 W U, C, R, K, J models .............................................................. NTSC
Dynamic Power Per Channel / (IHF) T, A, B, G, E models ................................................................ PAL
[RX-N600/RX-N600D/HTR-N5060] Video Format (Video Conversion) /
FRONT L/R (8/6/4/2 ohms) ............................. 130/165/195/240 W
[DSP-N600] ............................................................................... NTSC / PAL
FRONT L/R (-/6/4/2 ohms) ................................... -/135/165/210 W Composite Video Rated Input Voltage /
Maximum Output Power /
(SP IMPEDANCE SET: 8 ohms minimum/1 kHz, 0.7 % THD, 4 ohms) ....................................................................... 1 Vp-p / 75 ohms
[RX-N600/RX-N600D/HTR-N5060] (B, G, E models) S-Video Rated Input Voltage /
FRONT L/R ............................................................ 145 W + 145 W Y ........................................................................... 1 Vp-p / 75 ohms
CENTER ............................................................................... 145 W C ................................................................... 0.286 Vp-p / 75 ohms
SURROUND L/R ................................................... 145 W + 145 W Component Video Rated Input Voltage /
SURROUND BACK .............................................................. 145 W
HTR-N5060/DSP-N600




Y ........................................................................... 1 Vp-p / 75 ohms
RX-N600/RX-N600D/




Dynamic Headroom / (IHF)
[RX-N600/HTR-N5060] (U, C models) Cb/Cr ................................................................ 0.7 Vp-p / 75 ohms
FRONT L/R (8 ohms) ........................................................... 1.6 dB D4-Video Signal Level Rated Input Voltage /
IEC Output Power / (1 kHz, 0.06 % THD, 8 ohms) (J model)
Y ........................................................................... 1 Vp-p / 75 ohms
[RX-N600/RX-N600D/HTR-N5060] (B, G, E models)
Cb/Cr ................................................................ 0.7 Vp-p / 75 ohms
FRONT L/R ............................................................ 105 W + 105 W
Maximum Input Voltage /
Damping Factor /
VIDEO CONV. OFF ............................................. 1.5 Vp-p or more
FRONT L/R (20 Hz to 20 kHz, 8 ohms) ...................... 120 or more
Signal to Noise Ratio / .................................... 50 dB or more
Maximum Input Voltage / (1 kHz, 0.5 % THD)
CD, etc. (Effect on) .................................................... 2.2 V or more Frequency Response (Monitor Out ) /
Frequency Response / (VIDEO CONV. OFF)
CD, etc. (10 Hz to 100 kHz) ........................................... +0/-3.0 dB Component video signal level /
V-AUX (10 Hz to 20 kHz) ............................................... +0/-3.0 dB .................................................................. 5 Hz to 60 MHz, -3 dB
D4-video signal level / (J model)
Total Harmonic Distortion /
.................................................................. 5 Hz to 60 MHz, -3 dB
(20 Hz to 20 kHz, 50 W/8 ohms)
CD, etc. to FRONT L/R ............................................ 0.06 % or less
Signal to Noise Ratio / (IHF-A Network)
CD, etc. to FRONT L/R
250 mV ................................................................. 100 dB or more
Residual Noise / (IHF-A Network)
SP OUT ................................................................... 150 µV or less
Input Sensitivity/Input Impedance /
(1 KHz, 100 W/8 ohms)
CD, etc. ........................................................... 200 mV / 47 k-ohms
MULTI CH IN
FRONT L/R, CENTER, SURROUND L/R, SUBWOOFER
.................................................................. 200 mV / 47 k-ohms




10
RX-N600/RX-N600D/HTR-N5060/
DSP-N600




I FM Section · DIMENSIONS /
Tuning Range / Dimensions (W x H x D)
RX-N600
U, C models ....................................................... 87.5 to 107.9 MHz [RX-N600/RX-N600D/DSP-N600] RX-N600D HTR-N5060
R model ................................ 87.5 to 108.0 / 87.50 to 108.00 MHz ..................... 435 x 171 x 393.2 mm (17-1/8" x 6-3/4" x 15-1/2") DSP-N600
T, K, A, B, G, E models ................................. 87.50 to 108.00 MHz [HTR-N5060] Manufactured under license from Dolby Laboratories.
J model ................................................................ 76.0 to 90.0 MHz ................... 435 x 161 x 391.2 mm (17-1/8" x 6-5/16" x 15-3/8") "Dolby", "Pro Logic", and the double-D symbol are trademarks of




(7/8")




(7/8")
22




22
50 dB Quieting Sensitivity / (IHF) (1 kHz, 100 % Mod.) Weight Dolby Laboratories.
Mono / Stereo ........................ 2.0 µV (17.3 dBf) / 25 µV (39.2 dBf) [RX-N600/DSP-N600]
Usable Sensitivity / (IHF) ................................................................ 11.7 kg (25 lbs. 12 oz.)
Mono .................................................................... 1.0 µV (11.2 dBf) [RX-N600D]
Selectivity / (at 400 kHz) .............................................. 70 dB .................................................................. 11.9 kg (26 lbs. 3 oz.)
Signal to Noise Ratio / (IHF) [HTR-N5060]




348.2 (13-11/16")
Mono / Stereo ............................................................ 76 dB / 70 dB ................................................................ 11.2 kg (24 lbs. 11 oz.)




352.2 (13-7/8")

393.2 (15-1/2")




391.2 (15-3/8")
Harmonic Distortion / (1 kHz) Finish Manufactured under license from Digital Theater Systems, Inc.
Mono / Stereo ............................................................ 0.2 % / 0.3 % [RX-N600/RX-N600D] "DTS", "DTS-ES", "NEO:6", and "DTS 96/24" are trademarks of
Stereo Separation / Gold color .................................................................... R, T models Digital Theater Systems, Inc. Copyright 1996, 2003 Digital
1 kHz ...................................................................................... 42 dB Black color ........................................... U, C, R, A, B, G, E models Theater Systems, Inc. All right reserved.
Frequency Response / Titanium color ................................................ C, K, B, G, E models
20 Hz to 15 kHz .............................................................. +0.5/-2 dB [HTR-N5060]
Antenna Input / ......................... 75 ohms unbalanced Black color ................................................................... U, C models
Silver color ......................................................... U, C, A, G models
I AM Section / [DSP-N600] "iPod" is a trademark of Apple Computer, Inc., registered in the
Gold color ........................................................................... J model




(13/16")
U.S. and other countries.




(3/4")
Tuning Range /




19




21
Accessories
U, C models ......................................................... 530 to 1,710 kHz
Remote control x 1, Batteries x 2, Indoor FM antenna x 1, AM loop
R model ....................................... 530 to 1,710 / 531 to 1,611 kHz
antenna x 1, Indoor DAB antenna x 1 (B model)
T, K, A, B, G, E, J models ................................... 531 to 1,611 kHz




150 (5-15/16")




140 (5-1/2")
............................................ 300 µV/m




161 (6-5/16")
Usable Sensitivity /




171 (6-3/4")
* Specifications are subject to change without notice due to product
Antenna / .............................................. Loop antenna improvements.
I DAB Section (B model)
Tuning Range U .......... U.S.A. model C ...... Canadian model
Band III .................................................................. 174 to 240 MHz R .......... General model T ....... Chinese model 435 (17-1/8")




(13/16")




(13/16")
L-band .............................................................. 1,452 to 1,492 MHz K .......... Korean model A ...... Australian model




21




21
Sensitivity B .......... British model G ...... European model MPEG Layer-3 audio coding technology licensed from Fraunhofer
Band III .............................................................................. -99 dBm E .......... South European model J ....... Japanese model IIS and Thomson.
L-band ................................................................................ -95 dBm Unit: mm (inch)
Selectivity (for adjacent channel)
Band III ............................................................................... 40 dBm
L-band ................................................................................. 40 dBm
Signal to Noise Ratio
............................................................................................ 97 dB
Total Harmonic Distortion
.......................................................................................... 0.01 % This receiver supports network connections.
Stereo Separation
1 kHz ...................................................................................... 95 dB
Frequency Response
20 Hz to 20 kHz ........................................................... +0.5/-0.5 dB "SILENT CINEMA" is a trademark of YAMAHA CORPORATION.
Antenna Input .................................................. 75 ohms unbalanced

I General
Power Supply /
U, C models .......................................................... AC 120 V, 60 Hz
R model .............................. AC 110/120/220/230-240 V, 50/60 Hz The XM name and related logos are registered trademarks of XM
T model ................................................................. AC 220 V, 50 Hz Satellite Radio Inc.
K model ................................................................. AC 220 V, 60 Hz
A model ................................................................. AC 240 V, 50 Hz
B, G, E models ..................................................... AC 230 V, 50 Hz
J model ............................................................ AC 100V, 50/60 Hz Neural SurroundTM name and related logos are trademarks
Power Consumption owned by Neural Audio Corporation.
U, C models ........................................................... 350 W / 440 VA
R, T, K, A, B, G, E models ................................................... 360 W
J model ................................................................................. 250 W
Standby Power Consumption (reference data)
............................................................................................ 0.1 W The "DAB Digital Radio" logo and the stylised "r" mark ® and ©
Maximum Power Consumption / (R model) Digital One Limited.
6ch Drive, 10 % THD ........................................................... 700 W
AC Outlets
2 Switched Outlets
U, C, T, J models ................................................. 100 W max. total
R, B, G, E models ................................................. 50 W max. total This receiver supports DAB tuning.
1 Switched Outlet
A model ........................................................................ 100 W max.



11
RX-N600/RX-N600D/HTR-N5060/
DSP-N600


· SET MENU TABLE /
CATEGORY MAIN MENU SUB MENU SELECT MENU VALUE [INITIAL] CATEGORY MAIN MENU SUB MENU SELECT MENU VALUE [INITIAL]
BASIC ROOM : S >M L S / [M] / L D) VOLUME TRIM -6.0dB to +6.0dB [0dB] 0.5dB step
SETUP SUBWOOFER : YES [YES] / NONE CD / MD/CD-R / DVD / DTV/CBL / V-AUX / DVR
SPEAKER : 6spk 2spk / 3spk / 4 spk / 5spk / [6spk] 3 DAB A) INIT SCAN SCAN : FULL [FULL] / UK_BAND3 / NO
SETUP : OK [OK] / CANCEL MENU B) TUNE AID 5A LEVEL : XX [5A] / LW (DAB channel label)
CHECK OK? : YES [YES] / NO (B model) C) DRC MENU DRC MODE : AUTO [AUTO] / OFF
FR ·····||····· D) PRUNE LIST OK : [ENTER] YES / NO
C ·····||····· E) PRESET DELETE DELETE : XX XX (Preset number)
SL ·····||····· 3 NET / A) NETWORK DHCP : ON [ON] / OFF
±10.0dB step
SB ·····||····· USB IP xxx. xxx. xxx. xxx
SR ·····||····· MENU SUBNET 255. 255. 255. 000
SWFR ·····||····· (U, C, R, GATEWAY xxx. xxx. xxx. xxx 0 to 255
MANUAL 1 SOUND A) SPEAKER SET FRONT : LARGE SMALL / [LARGE] T, K, A, DNS (P) xxx. xxx. xxx. xxx
SETUP MENU CENTER : SML G, E, J DNS (S) xxx. xxx. xxx. xxx
SURROUND L/R : SML NONE / [SML] / LRG models) SET / CANCEL
SURROUND BACK : SML 4 NET / B) PLAY STYLE REPEAT : OFF [OFF] / SINGLE / ALL
BASS OUT : BOTH SWFR / FRONT / [BOTH] USB SHUFFLE : OFF [OFF] / ON
CROSS OVER : 80Hz 40 / 60 / [80] / 90 / 100 / 110 / 120 / 160 / 200 Hz MENU C) INFORMATION MAC ADDRESS xx. xx. xx. xx. xx. xx
SUBWOOFER PHASE : NORMAL [NORMAL] / REVERSE (B model) STATUS :
B) SPEAKER LEVEL FL ·····||····· 4 OPTION A) DISPLAY SET DIMMER :0 -4 to 0 [0], 1 step
FR ·····||····· MENU VIDEO CONV. : ON OFF / [ON]
C ·····||····· (U, C, R, OSD SHIFT :0 -5 to +5, 1step
SL ·····||····· -10dB to +10dB [CENTER 0dB], 0.5dB step T, K, A, GRAY BACK : AUTO OFF / [AUTO]
SR ·····||····· G, E, J ON SCREEN : 10S ON / [10S] / 30S
SB ·····||····· models) FL SCROLL : CONT [CONT] / ONCE
SWFR ·····||····· 5 OPTION B) MEMORY GUARD MEMORY GUARD : OFF [OFF] / ON
C) SP DISTANCE UNIT : meters feet / [meters] MENU C) PARAM. INI STEREO / MUSIC / ENTERTAINMENT / MOVIE THEATER / STANDARD
FRONT L : 10.0ft/3.00m (B model) D) MULTI ZONE SET SP B : FRONT [FRONT] / ZONE B
FRONT R : 10.0ft/3.00m E) XM RADIO SET XM DISPLAY : 10S [10S] / 30S / OFF
CENTER : 10.0ft/3.00m feet: 1.0 to 80.0ft [10.0ft], 0.5ft step (U, C models) XM ANTENNA : NONE 0% to 100% / [NONE]
SURR. L : 10.0ft/3.00m SCROLL : CONT [CONT] / ONCE
SURR. R : 10.0ft/3.00m meters: 0.30 to 24.00m [3.00m], 0.10m step
· DAB FREQUENCY TABLE
SURR. B : 7.0ft/2.10m
Band 3 L-Band
SWFR : 10.0ft/3.00m
D) CENTER GEQ TEST : >OFF ON [OFF] / ON Frequency Channel label Frequency Channel label Frequency Channel label
100Hz ·····||····· 0dB 174.928 MHz 5A 216.928 MHz 11A 1452.960 MHz LA
300Hz ·····||····· 0dB 176.640 MHz 5B 218.640 MHz 11B 1454.672 MHz LB
1kHz ·····||····· 0dB -6dB to +6dB [0dB], 1dB step 178.352 MHz 5C 220.352 MHz 11C 1456.384 MHz LC
3kHz ·····||····· 0dB 180.064 MHz 5D 222.064 MHz 11D 1458.096 MHz LD
10kHz ·····||····· 0dB 181.936 MHz 6A 223.936 MHz 12A 1459.808 MHz LE
E) LFE LEVEL SPEAKER LFE : 0dB 183.648 MHz 6B 225.648 MHz 12B 1461.520 MHz LF
-20dB to 0dB [0dB], 1dB step 185.360 MHz 6C 227.360 MHz 12C 1463.232 MHz LG
HEADPHONE LFE : 0dB
F) DYNAMIC RANGE SPEAKER : MAX 187.072 MHz 6D 229.072 MHz 12D 1464.944 MHz LH
MIN / STD / [MAX] 188.928 MHz 7A 230.784 MHz 13A 1466.656 MHz LI
HEADPHONE : MAX
G) AUDIO SET MUTING TYPE : FULL -20 dB / [FULL] 190.640 MHz 7B 232.496 MHz 13B 1468.368 MHz LJ
AUDIO DELAY : 0ms 0ms to 160ms, 1ms step 192.352 MHz 7C 234.208 MHz 13C 1470.080 MHz LK
TONE BYPASS : AUTO OFF / [AUTO] 194.064 MHz 7D 235.776 MHz 13D 1471.792 MHz LL
DUAL MONO : MAIN (J model) [MAIN] / SUB / ALL 195.936 MHz 8A 237.488 MHz 13E 1473.504 MHz LM
2 INPUT A) I/O ASSIGNMENT CMPNT-V INPUT [A] [DVD] / DTV/CBL / V-AUX / DVR 197.648 MHz 8B 239.200 MHz 13F 1475.216 MHz LN
MENU CMPNT-V INPUT [B] DVD / [DTV/CBL] / V-AUX / DVR 199.360 MHz 8C 1476.928 MHz LO
CMPNT-V INPUT [C] DVD / DTV/CBL / V-AUX / [DVR] 201.072 MHz 8D 1478.640 MHz LP
OPTICAL OUT (1) CD / [MD/CD-R] / DVD / DTV/CBL / V-AUX / DVR 202.928 MHz 9A 1480.352 MHz LQ
OPTICAL IN (2) CD / [MD/CD-R] / DVD / DTV/CBL / V-AUX / DVR 204.640 MHz 9B 1482.064 MHz LR
OPTICAL IN (3) CD / MD/CD-R / [DVD] / DTV/CBL / V-AUX / DVR 206.352 MHz 9C 1483.776 MHz LS
OPTICAL IN (4) CD / MD/CD-R / DVD / [DTV/CBL] / V-AUX / DVR 208.064 MHz 9D 1485.488 MHz LT
COAXIAL IN (5) [CD] / MD/CD-R / DVD / DTV/CBL / V-AUX / DVR 209.936 MHz 10A 1487.200 MHz LU
B) INPUT MODE [AUTO] / LAST 211.648 MHz 10B 1488.912 MHz LV
C) INPUT RENAME CD / MD/CD-R / DVD / DTV/CBL / V-AUX / DVR 213.360 MHz 10C 1490.624 MHz LW
12 215.072 MHz 10D
RX-N600/RX-N600D/HTR-N5060/
DSP-N600



I INTERNAL VIEW
· RX-N600/RX-N600D/DSP-N600

1 2 3 4 5 6 7 8 9 0

1 OPERATION (4) P.C.B.
2 FUNCTION (2) P.C.B.
3 NET P.C.B.
4 DAB P.C.B. (B model)
5 FUNCTION (3) P.C.B. (R model)
6 DSP P.C.B.
A 7 MAIN (5) P.C.B.
8 MAIN (4) P.C.B.
9 VIDEO P.C.B.
B
0 Tuner
A FUNCTION (1) P.C.B.
C B MAIN (1) P.C.B.
C FUNCTION (4) P.C.B.
D MAIN (2) P.C.B.
E Power Transformer
F OPERATION (7) P.C.B.
G OPERATION (1) P.C.B.
E D
H OPERATION (6) P.C.B.
I OPERATION (3) P.C.B.
J OPERATION (2) P.C.B.




J I H G F




HTR-N5060/DSP-N600
RX-N600/RX-N600D/
· HTR-N5060

1 2 3 4 5 6 7 8

1 OPERATION (4) P.C.B.
2 NET P.C.B.
3 FUNCTION (2) P.C.B.
4 DSP P.C.B.
5 MAIN (5) P.C.B.
6 MAIN (4) P.C.B.
9 7 VIDEO P.C.B.
8 Tuner
9 FUNCTION (1) P.C.B.
0
0 MAIN (1) P.C.B.
A FUNCTION (4) P.C.B.
A B OPERATION (7) P.C.B.
C OPERATION (6) P.C.B.
D MAIN (2) P.C.B.
E OPERATION (1) P.C.B.
F Power Transformer
G OPERATION (3) P.C.B.
G F E D C B

13
RX-N600/RX-N600D/HTR-N5060/
DSP-N600
RX-N600/RX-N600D/DSP-N600

I DISASSEMBLY PROCEDURES /
(Remove parts in the order as numbered.)
Disconnect the power cable from the AC outlet.

1. Removal of Top Cover
a. Remove 4 screws (1), 5 screws (2) and 1 screw (3). 1 2 3
(Fig. 1)
b. Slide the Top Cover rearward to remove it. (Fig. 1)

2. Removal of Front Panel Unit
a. Remove 2 Knobs. (Fig. 1)
b. Remove 1 screw (4) and then remove the Support Top. 4
(Fig. 1)
c. Remove 6 screws (5). (Fig. 1) 5
d. Remove the Front Panel Unit. (Fig. 1)

3. Removal of Plate Side
a. Remove 2 push rivets (6). (Fig. 1) 6
b. Remove the Plate Side L/R. (Fig. 1)

4. Removal of Sub Chassis Unit
a. Remove 2 screws (7) and then slide the Sub Chassis 7
Unit forward. (Fig. 1)
b. Remove 1 push rivet (8). (Fig. 1) 8
c. Remove the Barrier/FFC. (Fig. 1)
d. Remove CB5, CB203, CB205, CB312 and CB603.
(Fig. 1)
e. Remove the Sub Chassis Unit. (Fig. 1)



Top Cover 2


Plate Side L
1
HTR-N5060/DSP-N600




2
RX-N600/RX-N600D/




3