Text preview for : Yamaha-PM5D mix.pdf part of Yamaha PM5D mixer



Back to : Yamaha-PM5D mix.part01.ra | Home

PM5D/PM5D-RH




DIGITAL MIXING CONSOLE

PM5D/PM5D-RH
SERVICE MANUAL


DIGITAL MIXING CONSOLE




OPTION

POWER SUPPLY PM5D
PW800W
POWER SUPPLY LINK CABLE
PSL120

CONTENTS
SPECIFICATIONS ................................... 4 SAVING FILE to a MEMORY CARD
CONNECTOR PIN ASSIGNMENTS . 249/251
................................ 13 INITIALIZING THE PM5D's INTERNAL MEMORY
PANEL LAYOUT ................... 15 ................ 253
DIMENSIONS ......................................... 29 WARNING MESSAGES
CIRCUIT BOARD LAYOUT .............................. 254/256
........................................... 30 ERROR MESSAGES ... 255/257
DISASSEMBLY PROCEDURE ............ 36 MIDI IMPLEMENTATION CHART
LSI PIN DESCRIPTION .............. 71 ............ 258
IC BLOCK DIAGRAM ................... 84 MIDI DATA FORMAT
CIRCUIT BOARDS ........................ 92 .................................. 259
INSPECTIONS .................................. 191/203 PARTS LIST
SERVICE CHECK PROGRAM BLOCK DIAGRAM
......................... 215/225 OVERALL CONNECTOR CIRCUIT DIAGRAM
PANEL TEST ..................... 235/240
UPDATING THE PROGRAM CIRCUIT DIAGRAM
..................... 245/246 PW800W SERVICE MANUAL
INSTALLING an OPTION CARD PSL120 PARTS LIST
.................. 247/248




PA 011740
PM5D: 200408-
PM5D-RH: 200408- HAMAMATSU, JAPAN 1
PW800W: 200408- Copyright (c) Yamaha Corporation. All rights reserved. PDF-K75301 '04.09
PSL120: 200408-
PM5D/PM5D-RH



IMPORTANT NOTICE
This manual has been provided for the use of authorized Yamaha Retailers and their service personnel. It has been assumed that basic
service procedures inherent to the industry, and more specifically Yamaha Products, are already known and understood by the use rs,
and have therefore not been restated.

WARNING : Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury,
destruction of expensive components and failure of the product to perform as specified. For these reasons, we advise
all Yamaha product owners that all service required should be performed by an authorized Yamaha Retailer or the
appointed service representative.

IMPORTANT : This presentation or sale of this manual to any individual or firm does not constitute authorization certification,
recognition of any applicable technical capabilities, or establish a principal-agent relationship of any form.

The data provided is belived to be accurate and applicable to the unit(s) indicated on the cover. The research engineering, and service
departments of Yamaha are continually striving to improve Yamaha products. Modifications are, therefore, inevitable and changes in
specification are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the
distributor's Service Division.

WARNING : Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulated
by grounding yourself to the ground bus in the unit (heavy gauge black wires connect to this bus.)

IMPORTANT : Turn the unit OFF during disassembly and parts replacement. Recheck all work before you apply power to the unit.



WARNING: CHEMICAL CONTENT NOTICE!
The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or plastic (Where applicable)
components may also contain traces of chemicals found by the California Health and Welfare Agency (and possibly other entities) to cause
cancer and/or birth defects or other reproductive harm.

DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON WHAT SO EVER!

Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/
flux vapor!

If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling food.



LITHIUM BATTERY HANDLING
This product uses a lithium battery for memory back-up.
WARNING : Lithium batteries are dangerous because they can be exploded by improper handling. Observe the following precautions
when handling or replacing lithium batteries.
Leave lithium battery replacement to qualified service personnel.
Always replace with batteries of the same type.
When installing on the PC board by soldering, solder using the connection terminals provided on the battery cells.
Never solder directly to the cells. Perform the soldering as quickly as possible.
Never reverse the battery polarities when installing.
Do not short the batteries.
Do not attempt to recharge these batteries.
Do not disasemble the batteries.
Never heat batteries or throw them into fire.
ADVARSEL!
Lithiumbatteri-Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. levér det brugte batteri tilbage
til leverandren.
VARNING
Explosionsfara vid felaktigt batteribyte.
Använd samma batterityp eller en ekvivalent typ som rekommenderas av apparattillverkaren.
Kassera använt batteri enligt fabrikantens instruktion.
VAROITUS
Paristo voi räjähtää, jos se on virheellisesti asennettu.
Vaihda paristo ainoastaan laitevalmistajan suosittelemaan tyyppiiin.
Hävitä käytetty paristo valmistajan ohjeiden mukaisesti.
The following information complies with Dutch official Gazette 1995. 45; ESSENTIALS OF ORDER ON THE COLLECTION OF BATTERIES.
· Please refer to the diassembly procedure for the removal of Back-up Battery.
· Leest u voor het verwijderen van de backup batterij deze beschrijving.




WARNING
Components having special characteristics are marked and must be replaced with parts having specification equal to those
originally installed.




2
PM5D/PM5D-RH




Take care not to trap your fingers.




PM5D-RH


PM5D




PW800W




PW800W



PW800W
PSL120


3
PM5D/PM5D-RH


SPECIFICATIONS
1. General Specifications
Internal: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Sampling Frequency External: 44.1 kHz (-10%) to 48 kHz (+6%)
88.2 kHz (-10%) to 96 kHz (+6%)
PM5D: Less than 2.3 ms INPUT to STEREO A,B (@Fs = 48 kHz)
Less than 1.15 ms INPUT to STEREO A,B (@Fs = 96 kHz)
Signal Delay
PM5D-RH: Less than 2.5 ms INPUT to STEREO A,B (@Fs = 48 kHz)
Less than 1.25 ms INPUT to STEREO A,B (@Fs = 96 kHz)
Fader 100mm motorized x38
Fader Resolution +10 to -138, - dB (1024 steps/100 mm)
PM5D: 84 dB INPUT1-48 to Each Output
Maximum Voltage Gain
PM5D-RH: 86 dB INPUT1-48 to Each Output
Crosstalk (@1kHz) -80 dB Adjacent Input Channels (INPUT1-48)
Dimensions 1551 x 950 x 283 mm (W x D x H)
PM5D: 98 kg
Net Weight
PM5D-RH: 97 kg
PM5D: 480W, DC 24V, 20A (Use PW800W Only)
Power Requirements
PM5D-RH: 528W, DC 24V, 22A (Use PW800W Only)
Operation free-air Temperature Range +10°C to + 35°C
Storage Temperature Range -20°C to + 60°C
Owner's Manual
Gooseneck Lamps x 3
Included Accessories Power Supply PW800W Connection Cable
Studio Manager CD-ROM
Studio Manager Installation Guide
mini YGDAI cards
Optional Accessories Power Supply PW800W
Power Supply Link Cable PSL120




Analog Input (1-48)
Connector XLR-3-31 Type (Balanced) x48
PM5D: +48V DC is supplied to Input by individual mechanical switch
Phantom Power
PM5D-RH: +48V DC is supplied to Input by individual software control
Pad Switch PM5D: 0/26 dB attenuation
PM5D: 44 dB detented
­60 dB to ­16 dB (PAD=OFF), ­34 to +10 dB (PAD=ON)
Gain Control
PM5D-RH: 72 dB by software control
­62 dB to 10 dB (1 dB step)
Peak Indicator Red LED is lit when post HA level reaches 3 dB below clipping
Signal Indicator Green LED is lit when post HA level reaches 14 dB below nominal
Insert (Pre AD converter) PM5D: Out, In (TRS Balanced)
Insert Switch PM5D: On/Off
AD Converter 24bit linear, 128 times oversampling




Analog Input (ST IN1-4 [L,R])
Connector XLR-3-31 Type (Balanced) x8
Phantom Power PM5D-RH: +48V DC is supplied to Input by individual software control
PM5D: 44 dB detented
­34 dB to +10 dB
Gain Control
PM5D-RH: 72 dB by software control
­62 dB to +10 dB (1 dB step)
Peak Indicator Red LED is lit when post HA level reaches 3 dB below clipping
Signal Indicator Green LED is lit when post HA level reaches 14 dB below nominal
AD Converter 24bit linear, 128 times oversampling




4
PM5D/PM5D-RH




Analog Input (2TR IN ANALOG1,2 [L,R]) STEREO A,B [L,R] MIX1-24 MATRIX1-8
Connector XLR-3-31 Type (Balanced) x4 Connector XLR-3-32 Type (Balanced)
Gain Switch +24 dBu (default) / +18 dBu DA Converter 24bit linear, 128 times oversampling
AD Converter 24bit linear, 128 times oversampling


MONITOR OUT [L,C,R], CUE OUT
Digital Input (2TR IN DIGITAL1-3) Connector XLR-3-32 Type (Balanced)
AES/EBU XLR-3-31 Type (Balanced) x2 (DIGITAL DA Converter 24bit linear, 128 times oversampling
Connector IN 1,2) Level Control Analog potentiometer
SPDIF RCA PIN (DIGITAL IN 3)
Sampling Rate On/Off by software control (1:3 and 3:1 maxi-
Converter mum input to output sample rate ratio)
PHONES (x2)
Connector TRS
Talkback Input Level Control Analog potentiometer
Connector XLR-3-31 Type (Balanced)
Phantom Power +48V DC is supplied by software control
Gain 50 dB fixed (pre level control) Digital Output (2TR OUT DIGITAL1-3)
AD Converter 24bit linear, 128 times oversampling AES/EBU XLR-3-32 Type (Balanced) x2 (DIGITAL
TALKBACK IN and selected INPUT1-48 can be Connector OUT 1,2)
Talkback Select SPDIF RCA PIN (DIGITAL OUT 3)
used simultaneously
Sampling Rate On/Off by software control (1:3 and 3:1 maxi-
Converter mum input to output sample rate ratio)

Oscillator
Level 0 to ­96dB (1dB step)
On/Off Dedicated switch and software control
MODE: Sine Wave 1ch, Sine Wave 2ch, Pink
Waveform Noise, Burst Noise
Sine Waveform: 100Hz, 1kHz, 10kHz
Routing MIX1-24, MA TRIX1-8, STEREO A,B (L,R)




5
PM5D/PM5D-RH




2. Inputs/Outputs Characteristics

Analog Input Characteristics (PM5D)
Input Level
Actual Load For Use With
Input Terminals PAD GAIN
Impedance Nominal GAIN SW *4 *1 Max. Before Connector
Sensitivity Nominal
Clip
-80 dBu -60 dBu -40 dBu
-60dB
(0.0775 mV) (0.775 mV) (7.75 mV)
0 50-600 Mics
-36 dBu -16 dBu +4 dBu XLR-3-31 Type
INPUT 1-48 3k & --
600 Lines
(12.3 mV) (123 mV) (1.23 V) (Balanced)*2
-16dB
-10 dBu +10 dBu +30 dBu
26
(245 mV) (2.45 V) (24.51 V)
-54 dBu -34 dBu -14 dBu
-34dB
(1.55 mV) (15.5 mV) (155 mV) XLR-3-31 Type
ST IN1-4 [L,R] -- 4k 600 Lines --
-10 dBu +10 dBu +30 dBu (Balanced)*2
10dB
(245 mV) (2.54 V) (24.51 V)
-16 dBu +4 dBu +24 dBu Phone Jack (TRS)
INSERT IN 1-48 -- 10k 600 Lines --
(123 mV) (1.23 V) (12.28 V) (Balanced)*3
+24 dB -6 dBu +4 dBu +24 dBu
2TR IN ANALOG (default) (388 mV) (1.23 V) (12.28 V) XLR-3-31 Type
-- 10k 600 Lines
1,2 [L,R] -12 dBu -2 dBu +18 dBu (Balanced)*2
+18 dB
(195 mV) (0.616 V) (6.16 V)
50-600 Mics XLR-3-31 Type
-60 dBu -50 dBu -30 dBu
TALKBACK -- 3k & --
600 Lines
(0.775 mV) (2.45 mV) (24.5 mV) (Balanced)*2


Analog Input Characteristics (PM5D-RH)
Input Level
Actual Load For Use With
Input Terminals GAIN GAIN SW *4 Max. Before Connector
Impedance Nominal Sensitivity *1 Nominal
Clip
-82 dBu -62 dBu -42 dBu
-62dB 50-600 Mics (61.6 µV) (0.616 mV) (6.16 mV) XLR-3-31 Type
INPUT 1-48 3k & --
600 Lines -10 dBu +10 dBu +30 dBu (Balanced)*2
+10dB
(245 mV) (2.45 V) (24.5 V)
-82dBu -62 dBu -42 dBu
-62dB 50-600 Mics (61.6 µV) (0.616 mV) (6.16 mV) XLR-3-31 Type
ST IN1-4 [L,R] 3k & --
600 Lines -10 dBu +10 dBu +30 dBu (Balanced)*2
+10dB
(245 mV) (2.45 V) (24.5 V)
+24 dB -6 dBu +4 dBu +24 dBu
2TR IN ANALOG (default) (388 mV) (1.23 V) (12.28 V) XLR-3-31 Type
-- 10k 600 Lines
1,2 [L,R] -12 dBu -2 dBu +18 dBu (Balanced)*2
+18 dB
(195 mV) (0.616 V) (6.16 V)
50-600 Mics XLR-3-31 Type
-60 dBu -50 dBu -30 dBu
TALKBACK -- 3k & --
600 Lines
(0.775 mV) (2.45 mV) (24.5 mV) (Balanced)*2


*1. Sensitivity is the lowest level that will produce an output of +4 dBu (1.23 V) or the nominal output level when the unit is set to maximum gain. (All faders
and level controls are maximum position.)
*2. XLR-3-31 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
*3. Phone jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND )
*4. There are switches inside the body to preset the maximum input level.

* In these speci cations, 0 dBu = 0.775 Vrms.
* All input AD converters are 24bit linear, 128 times (@48 kHz) oversampling.
* PM5D: +48V DC (phantom power) is supplied to INPUT (1-48) XLR type connectors via each individual switch, and TALKBACK XLR type connectors
via software switch.
PM5D-RH: +48V DC (phantom power) is supplied to INPUT (1-48) and TALKBACK XLR type connectors via master mechanical switch and each individ-
ual software switch.




6
PM5D/PM5D-RH




Analog Output Characteristics
Output Actual Source For Use With Output Level
Terminals Impedance Nominal GAIN SW*4 Connector
Nominal Max. Before Clip
+24 dB (default) +4 dBu (1.23 V) +24 dBu (12.28 V) XLR-3-32 Type
STEREO A,B [L,R] 150 600 Lines
+18 dB ­2 dBu (616 mV) +18 dBu (6.16 V) (Balanced)*1

MONITOR OUT +24 dB (default) +4 dBu (1.23 V) +24 dBu (12.28 V) XLR-3-32 Type
150 600 Lines
[L,R,C] +18 dB ­2 dBu (616 mV) +18 dBu (6.16 V) (Balanced)*1
+24 dB (default) +4 dBu (1.23 V) +24 dBu (12.28 V) XLR-3-32 Type
CUE OUT [L,R] 150 600 Lines
+18 dB ­2 dBu (616 mV) +18 dBu (6.16 V) (Balanced)*1
+24 dB (default) +4 dBu (1.23 V) +24 dBu (12.28 V) XLR-3-32 Type
MATRIX OUT 1-8 150 600 Lines
+18 dB ­2 dBu (616 mV) +18 dBu (6.16 V) (Balanced)*1
+24 dB (default) +4 dBu (1.23 V) +24 dBu (12.28 V) XLR-3-32 Type
MIX OUT 1-24 150 600 Lines
+18 dB ­2 dBu (616 mV) +18 dBu (6.16 V) (Balanced)*1
Phone Jack (TRS)
INSERT OUT 1-48 150 10k Lines -- +4 dBu (1.23 V) +24 dBu (12.28 V)
(Balanced)*2 *5
8 Phones 75 mW *6 150 mW Stereo Phone Jack
PHONES (x 2) 15 --
40 Phones 65 mW *6 150 mW (TRS) (Unbalanced)*3

*1. XLR-3-32 type connectors are balanced.(1=GND,2=HOT,3=COLD)
*2. Phone jacks are balanced.(Tip=HOT,Ring=COLD,Sleeve=GND)
*3. PHONES stereo phone jacks areunbalanced.(Tip=LEFT,Ring=RIGHT,Sleeve=GND)
*4. There are switches inside the body to preset the maximum output level.
*5. INSERT OUTs are only provided for PM5D.
*6. The position of the level control is 10 dB lowered from Max.
* Inthese specifications,0 dBu =0.775 Vrms.
* All output DA converters are 24bit,128 times (@48 kHz)oversampling.




Digital Input Characteristics
Terminal Format Data Length Level Connector
1 AES/EBU AES/EBU 24bit RS422 *1
XLR-3-31 Type (Balanced)
2TR IN DIGITAL 2 AES/EBU AES/EBU 24bit RS422 *1
XLR-3-31 Type (Balanced)
3 COAXIAL IEC-60958 24bit 0.5Vpp/75 RCA Pin Jack
CASCADE IN -- RS422 D-Sub Half Pitch Connector 68P (Female)
*1. XLR-3-31 type connectors are balanced.(1=GND,2=HOT,3=COLD)


Digital Output Characteristics
Terminal Format Data Length Level Connector
AES/EBU*1 *3
1 AES/EBU 24bit RS422 XLR-3-32 Type (Balanced)*4
Professional Use
AES/EBU*1
2TR OUT DIGITAL 2 AES/EBU 24bit *3 RS422 XLR-3-32 Type (Balanced)*4
Professional Use
IEC-60958*2 0.5Vpp/75
3 COAXIAL 24bit *3 RCA Pin Jack
Consumer Use
CASCADE OUT -- RS422 D-Sub Half Pitch Connector 68P (Female)

*1. The channel status of 2TR OUT DIGITAL 1, 2 is described on page 8.
*2. The channel status of 2TR OUT DIGITAL 3 is described on page 8.
*3. Dither:word length 16/20/24 bit
*4. XLR-3-32 type connectors are balanced.(1=GND, 2=HOT, 3=COLD)




7
PM5D/PM5D-RH




Channel Status of 2TR OUT DIGITAL 1, 2
byte bit field name fixed/variable data description
0 Block Format 1 professional use
1 Mode 0 audio
fixed
2-4 Emphasis 0x4 off
5 Fs Lock 0 lock
0
0x0 others
0x3 32kHz
6-7 Sampling Frequency variable
0x2 44.1kHz
0x1 48kHz
0-3 Channel Mode 0x1 2ch mode
1 fixed
4-7 Users Bit Management 0x0 --
0-2 Use of AUX 0x1 24bits Audio Data
2 fixed
3-7 Source 0x00 --
3 0-7 Multi Channel fixed 0x00 --
0-1 Digital Audio Reference Signal 0x0
fixed --
2 -- 0
0x0 others
4
3-6 Sampling Frequency variable 0x5 88.2kHz
0x4 96kHz
7 Sampling Frequency Scan Flag fixed 0 --



Channel Status of 2TR OUT DIGITAL 3
byte bit field name fixed/variable data description
0 Block Format consumer use
0
1 Mode audio
2 Copy 1 enabled
3 Emphasis off
0 fixed
4
5 0
-- --
6
7
1 0-7 Category Code fixed 0x49 Digital Mixer (L=1:original)
0-3 Source Number
2 fixed 0x0
4-7 Channel Number
0xC 32kHz
0x0 44.1kHz
0x4 48kHz
0-3 Sampling Frequency variable
0x8 --
3 0x1 88.2kHz
0x5 96kHz
4-5 Fs Accuracy 0x0 Level II
6 fixed
-- 0 --
7
4 0 Maximum Audio Sample word length fixed 1 24bits
1-3 Sample Word Length fixed 0x5 24bits
0x3 32kHz
0xF 44.1kHz
0xB 48kHz
4-7 Original Sampling Frequency variable
0x0 --
0xE 88.2kHz
0xA 96kHz




8
PM5D/PM5D-RH




Control I/O Characteristics
Terminal Format Level Connector
TO HOST USB USB 1.1 B Type USB Connector
IN
--
MIDI THRU MIDI DIN Connector 5P
OUT
TIME CODE IN SMPTE SMPTE 0.3Vpp(Min)/10.0Vpp(Max), 10k XLR-3-31 Type (Balanced)*1
IN TTL/75 (ON/OFF)
WORD CLOCK -- BNC Connector
OUT TTL/75
GPI -- *3
D-Sub Connector 25P (Female)
HA REMOTE -- D-Sub Connector 9P (Male)
RS422
RS422 REMOTE D-Sub Connector 9P (Female)
KEYBOARD
PS/2 -- DIN Connector 6P
MOUSE
LAMP 1,2,3 2.5V - 11.5V XLR-4-31 Type*2
--
MEMORY CARD -- PCMCIA (Compact Flash)

*1. XLR-3-31 type connectors are balanced. (1/Sleeve=GND, 2/Tip=HOT, 3/Ring=COLD)
*2. 4pin=HOT, 3pin=COLD, Lamp rating 5 W, Voltage control by variable volume
*3. Inputs: 4 channels, Outputs: 12 channels
Input Pin: AD Converter (7bit, 128steps, Voltage Detection Range: 0-5V, Maximum Rating: 5V)
Output Pin: Open Collector (Vmax=12V, Imax/pin=75 mA, GPO1-8: Total Imax=300 mA, GPO9-12: Total Imax=300 mA)
Power Pin: Power Supply (Vp=5V, Imax/2 pin=500 mA)




SLOT 1-4 Characteristics
The Number Of
Card Name Function Input Output
Usable Cards
MY8-AT ADAT
MY8-TD TASCAM 8 IN 8 OUT
MY8-AE AES/EBU
MY4-AD 4 IN
ANALOG IN --
MY8-AD 8 IN
MY4-DA ANALOG OUT -- 4 OUT
MY8-AD24
ANALOG IN 8 IN --
MY8-AD96 4
MY8-DA96 ANALOG OUT --
MY8-AE96S 8 OUT
AES/EBU 8 IN
MY8-AE96
MY16-AT ADAT
MY16-AE AES/EBU 16 IN 16 OUT
MY16-TD TASCAM
MY16-C CobraNet TM 16 IN 16 OUT




9
PM5D/PM5D-RH




3. Electrical Characteristics
All faders are nominal when measured. Output impedance of signal generator: 150ohms
Frequency Respones Fs= 44.1 kHz or 48 kHz @20 Hz­20 kHz, referenced to the nominal output level @1 kHz
Fs= 88.2 kHz or 96 kHz @20 Hz­40 kHz, referenced to the nominal output level @1 kHz
Input Output RL Conditions Min. Typ. Max. Unit
STEREO A,B
MIX OUT
MATRIX OUT 600 PM5D: GAIN: Max., PAD: Off ­1.5
INPUT 1-48
MONITOR OUT PM5D-RH: GAIN: Max.
0.0 0.5 dB
CUE OUT
PHONES 8 ­3.0
STEREO A,B
2TR IN ANALOG 1,2 600 ­1.5
MONITOR OUT



Gain Error @1 kHz
Input Output RL Conditions Min. Typ. Max. Unit
PM5D: Input Level : ­60 dBu, GAIN: Max., PAD: Off
PM5D-RH: Input Level : ­62 dBu, GAIN: Max.
INPUT 1-48 STEREO A,B 600 2.0 4.0 6.0
PM5D: Input Level : +10 dBu, GAIN: Min., PAD: On
PM5D-RH: Input Level : +10 dBu, GAIN: Min.
2TR IN ANALOG 1,2 STEREO A,B 600 Input Level: +4 dBu 2.0 4.0 6.0
STEREO A,B dBu
MIX OUT Full Scale Output
MATRIX OUT 600 23.5 24.0 24.5
Internal OSC
MONITOR OUT Full Scale Output, MONITOR Level Control: Max.
CUE OUT Full Scale Output, CUE Level Control: Max.
PHONES 8 ­30 dBFs, PHONES Level Control: Max. ­0.5 0 0.5



Total Harmonic Distortion Fs= 44.1 kHz or 48 kHz
Input Output RL Conditions Min. Typ. Max. Unit
PM5D: +4 dBu @20 Hz­20 kHz, GAIN: Max., PAD: Off
0.1
PM5D-RH: +4 dBu @20 Hz­20 kHz, GAIN: Max.
INPUT 1-48 STEREO A,B 600
PM5D: +4 dBu @20 Hz­20 kHz, GAIN: Min., PAD: On
0.05
PM5D-RH: +4 dBu @20 Hz­20 kHz, GAIN: Min.
2TR IN ANALOG 1,2 STEREO A,B 600 +4 dBu @20 Hz­20 kHz 0.05
STEREO A,B %
MIX OUT Full Scale Output @1 kHz
MATRIX OUT 600 0.02
Internal OSC
MONITOR OUT Full Scale Output @1 kHz, MONITOR Level Control : Max.
CUE OUT Full Scale Output @1 kHz, CUE Level Control: Max.
PHONES 8 Full Scale Output @1kHz, PHONES Level Control: Max. 0.2
* Total Harmonic Distortion is measured with a 18 dB/octave filter @80 kHz


Total Harmonic Distortion Fs= 88.2 kHz or 96 kHz
Input Output RL Conditions Min. Typ. Max. Unit
PM5D: +4 dBu @20 Hz­40 kHz, GAIN: Max., PAD: Off 0.1
PM5D-RH: +4 dBu @20 Hz­40 kHz, GAIN: Max. 0.12
INPUT 1-48 STEREO A,B 600
PM5D: +4 dBu @20 Hz­40 kHz, GAIN: Min., PAD: On
0.05
PM5D-RH: +4 dBu @20 Hz­40 kHz, GAIN: Min.
2TR IN ANALOG 1,2 STEREO A,B 600 +4 dBu @20 Hz­40 kHz 0.05
STEREO A,B %
MIX OUT Full Scale Output @1 kHz
MATRIX OUT 600 0.02
Internal OSC
MONITOR OUT Full Scale Output @1 kHz, MONITOR Level Control : Max.
CUE OUT Full Scale Output @1 kHz, CUE Level Control: Max.
PHONES 8 Full Scale Output @1kHz, PHONES Level Control: Max. 0.2
* Total Harmonic Distortion is measured with a 18 dB/octave filter @80 kHz

10
PM5D/PM5D-RH




Hum & Noise EIN= Equivalent Input Noise
Input Output RL Conditions Min. Typ. Max. Unit
Master fader at nominal level and one INPUT fader at nomi- ­128
nal level. EIN
PM5D: Rs= 150 , GAIN: Max., PAD: Off ­64
INPUT 1-48 PM5D-RH: Rs= 150 , GAIN: Max. ­62
Master fader at nominal level and one INPUT fader at nomi-
STEREO A,B 600 nal level.
­81 ­76
PM5D: Rs= 150 , GAIN: Min., PAD: On
PM5D-RH: Rs= 150 , GAIN: Min.
Master fader at nominal level and all INPUT1-48 faders at
nominal level.
All INPUT ­64
PM5D: Rs= 150 , GAIN: Min., PAD: On dBu
PM5D-RH: Rs= 150 , GAIN: Min.
Master fader at nominal level.
2TR IN ANALOG 1,2 STEREO A,B 600 ­81 ­76
Rs= 150
STEREO A,B Residual Output Noise, ST Master Off
MIX OUT Residual Output Noise, MIX Master Off
MATRIX OUT 600 Residual Output Noise, MATRIX Master Off
-- ­86
MONITOR OUT Residual Output Noise, MONITOR Level Control Min.
CUE OUT Residual Output Noise, CUE Level Control Min.
PHONES 8 Residual Output Noise, PHONES Level Control Min.
* Hum & Noise is measured with a 6 dB/octave filter @12.7 kHz; equivalent to a 20 kHz filter with infinite dB/octave attenuation.



Dynamic Range
Input Output RL Conditions Min. Typ. Max. Unit
PM5D: AD + DA, GAIN: Min.,
Fs= 44.1/48 kHz 108
INPUT 1-48 STEREO A,B PAD: On
PM5D-RH: AD + DA, GAIN: Min. Fs= 88.2/96 kHz 106
STEREO A,B
600 dB
MIX OUT
-- MATRIX OUT DA Converter 110
MONITOR OUT
CUE OUT
* Dynamic range is measured with a 6 dB/octave filter @12.7 kHz; equivalent to a 20 kHz filter with infinite dB/octave attenuation.



Input Indicator Level
Input Output Condition Min. Typ. Max. Unit
PEAK Red LED: ON 19 21 23
INPUT 1-48
SIGNAL Green LED: ON ­12 ­10 ­8
INSERT OUT dBu
PEAK Red LED: ON 19 21 23
ST IN 1-4
SIGNAL Green LED: ON ­12 ­10 ­8



Sampling Frequency
Parameter Conditions Min. Typ. Max. Unit
Normal Rate 39.69 50.88
External Clock Frequency Range
Double Rate 79.39 101.76
Word Clock : Int 44.1kHz 44.1
kHz
Word Clock : Int 48kHz 48
Frequency
Word Clock : Int 88.2kHz 88.2
Word Clock : Int 96kHz 96
Word Clock : Int 44.1kHz
Word Clock : Int 48kHz
Internal Clock Accuracy 50 ppm
Word Clock : Int 88.2kHz
Word Clock : Int 96kHz
Word Clock : Int 44.1kHz
Word Clock : Int 48kHz
Jitter 5 ns
Word Clock : Int 88.2kHz
Word Clock : Int 96kHz


11
PM5D/PM5D-RH



4. Other Functions

Libraries Output Function
Name Number Total Function Parameter
Scene Memory Preset 1 + User 500 501 Frequency= 20 Hz to 20 kHz
Input Patch Library Preset 1 + User 99 100 Gain= ­18 dB to +18 dB
Output Patch Library Preset 1 + User 99 100 8Band Equalizer Q= 0.10 to 10.0
Input Channel Library Preset 1 + User 199 200 (Matrix: 4band) Low Shelving (Low Band)
Output Channel Library Preset 1 + User 199 200 High Shelving, LPF (High Band)
Input EQ Library Preset 40 + User 159 199 Type I/Type II
Output EQ Library Preset 3 + User 196 199 Insert Insert Point: Pre EQ/Post EQ/Pre Fader/Post On
GATE Library Preset 4 + User 195 199 Type: Comp/Expander/Compander H/Com-
COMP Library Preset 36 + User 163 199 pander S

Effect Library Preset 54 + User 145 199 Threshold= ­54 dB to 0 dB

GEQ Library Preset 1 + User 199 200 Ratio= 1:1 to :1
Compressor
HA Library Preset 1 + User 199 200 Attack= 0 msec to 120 msec
Release= 5 msec to 42.3 sec

Input Function Gain= 0 dB to +18 dB
Knee= Hard to 5 (soft)
Function Parameter
Input Delay Time = 0.0 msec to 1000 msec
Phase Normal/Reverse
Fader Level: 1024 steps, , ­138 dB to +10 dB
MS Decode On, S-Gain
On On/Off
Attenuator ­96 to +24 dB
DCA Group 2 Groups
Slope= 12 dB/Oct
HPF Mute Group 8 Groups
Frequency= 20 Hz to 600 Hz
Mix to Matrix Matrix Send Point: Pre Fader/Post Fader/Post On
Frequency= 20 Hz to 20 kHz Stereo to Matrix Level: 1024 steps, , ­138 dB to +10 dB
Gain= ­18 dB to +18 dB
Output Port Att 0 dB to ­9 dB
Q= 0.10 to 10.0
4Band Equalizer
Low Shelving (Low Band)
Processor
High Shelving, LPF (High Band)
Function Parameter
Type I/Type II
GEQ 31 bands x 12 systems
Insert Insert Point: Pre EQ/Post EQ/Pre Delay/Post Fader
Effects Stereo In/Stereo Out multi effector x 8 systems
Direct Out Point: Pre HPF/Pre EQ/Pre Fader/Post
Direct Out
On
Type: Gate/Ducking
Threshold= ­54 dB to 0 dB
Attack= 0 msec to 120 msec
Hold= 0.02 msec to 1.96 sec
Noise Gate Decay= 5 msec to 42.3 sec
Range= ­70 dB to 0 dB
Key In: Self Pre EQ/Self Post EQ/Mix21-24/
Ch1-STIN4R (8ch block)
Key In Filter: HPF/LPF/BPF
Type: Comp/Expander/Compander H/
Compander S
Threshold= ­54 dB to 0 dB
Ratio= 1:1 to :1
Compressor
Attack= 0 msec to 120 msec
Release= 5 msec to 42.3 sec
Gain= 0 dB to +18 dB
Knee= Hard to 5 (soft)
Input Delay Time= 0.0 msec to 1000 msec
Fader Level: 1024 steps, , ­138 dB to +10 dB
On On/Off
DCA Group 8 Groups
Mute Group 8 Groups
24 sends
Fix/Variable can be set each two mixes
Mix Send Mix Send Point: Pre EQ/Pre Fader/Post On/Post
TO ST
Level: 1024 steps, , ­138 dB to +10 dB
LCR Pan CSR= 0% to 100%
12 Surround Pan 3-1, 5.1, 6.1 panning support
PM5D/PM5D-RH


CONNECTOR PIN ASSIGNMENTS
34 3 2 1




68 37 36 35

CASCADE IN CASCADE OUT
Pin Signal Pin Signal Pin Signal Pin Signal
1 GND 35 GND 1 GND 35 GND
2 Input 1-2(+) 36 Input 1-2(­) 2 Output 1-2(+) 36 Output 1-2(­)
3 Input 3-4(+) 37 Input 3-4(­) 3 Output 3-4(+) 37 Output 3-4(­)
4 Input 5-6(+) 38 Input 5-6(­) 4 Output 5-6(+) 38 Output 5-6(­)
5 Input 7-8(+) 39 Input 7-8(­) 5 Output 7-8(+) 39 Output 7-8(­)
6 Input 9-10(+) 40 Input 9-10(­) 6 Output 9-10(+) 40 Output 9-10(­)
7 Input 11-12(+) 41 Input 11-12(­) 7 Output 11-12(+) 41 Output 11-12(­)
8 Input 13-14(+) 42 Input 13-14(­) 8 Output 13-14(+) 42 Output 13-14(­)
9 Input 15-16(+) 43 Input 15-16(­) 9 Output 15-16(+) 43 Output 15-16(­)
10 DTR In(+) 44 DTR In(­) 10 DTR Out(+) 44 DTR Out(­)
11 RTS Out(+) 45 RTS Out(­) 11 RTS In(+) 45 RTS In(­)
12 GND 46 GND 12 GND 46 GND
13 Word Clock In(+) 47 Word Clock In(­) 13 Word Clock Out(+) 47 Word Clock Out(­)
14 Word Clock Out(+) 48 Word Clock Out(­) 14 Word Clock In(+) 48 Word Clock In(­)
15 Control In(+) 49 Control In(­) 15 Control Out(+) 49 Control Out(­)
16 Control Out(+) 50 Control Out(­) 16 Control In(+) 50 Control In(­)
17 GND 51 ID6 In 17 GND 51 ID6 Out
18 GND 52 ID6 Out 18 GND 52 ID6 In
19 Input 17-18(+) 53 Input 17-18(­) 19 Output 17-18(+) 53 Output 17-18(­)
20 Input 19-20(+) 54 Input 19-20(­) 20 Output 19-20(+) 54 Output 19-20(­)
21 Input 21-22(+) 55 Input 21-22(­) 21 Output 21-22(+) 55 Output 21-22(­)
22 Input 23-24(+) 56 Input 23-24(­) 22 Output 23-24(+) 56 Output 23-24(­)
23 Input 25-26(+) 57 Input 25-26(­) 23 Output 25-26(+) 57 Output 25-26(­)
24 Input 27-28(+) 58 Input 27-28(­) 24 Output 27-28(+) 58 Output 27-28(­)
25 Input 29-30(+) 59 Input 29-30(­) 25 Output 29-30(+) 59 Output 29-30(­)
26 Input 31-32(+) 60 Input 31-32(­) 26 Output 31-32(+) 60 Output 31-32(­)
27 ID0 In 61 ID1 In 27 ID0 Out 61 ID1 Out
28 ID2 In 62 ID3 In 28 ID2 Out 62 ID3 Out
29 ID4 In 63 ID5 In 29 ID4 Out 63 ID5 Out
30 ID0 Out 64 ID1 Out 30 ID0 In 64 ID1 In
31 ID2 Out 65 ID3 Out 31 ID2 In 65 ID3 In
32 ID4 Out 66 ID5 Out 32 ID4 In 66 ID5 in
33 MSB In 67 2Ch/Line In 33 MSB Out 67 2Ch/Line Out
34 FG 68 FG 34 FG 68 FG



1 5 5 1




6 9 9 6
HA REMOTE