Text preview for : 601_uk_user.pdf part of Scantronic 601 User Manual for 601 alarm panel



Back to : 601_uk_user.pdf | Home

Scantronic 601/602 User Instructions
Full set the system
1. Enter [User code] Exit tone sounds

http://groups.msn.com/UKSecurityPanels

This manual can be downloaded from

Part set the system
1. 2. 3. Press [2] Press [ENT] Enter [User code]

Unset the system
1. Enter [User code] Entry tone stops

Reset system after alarm condition
1. Enter [User code]

Omit a zone
1. 2. 3. 4. Enter [User code] Press [OMIT] Press [Zone number to omit] Repeat above two steps as required for addition zones Zone is omitted

Change your own user code
1. 2. 3. 4. Press [4] Press [ENT] Enter [User code] Enter existing [user to change] Defaults user codes are 0001 to 0007 for users 2 to 8, and [OMIT] [OMIT] [OMIT] [OMIT] for the duress code (all inactive!)

5.

Enter new [User code]

Test the alarm sounders
1. 2. 3. Press [8] Press [ENT] Enter [User code] Sounders should sound

Walk test the detection devices
1. 2. 3. Press [9] Press [ENT] Enter [User code] Walk test detectors as required sounder tone changes to indicate detector active

4.

Enter [ENT] to end test

Keypad personal attack alarm
1. Press [1] and [3] together Personal attack alarm generated

View the event log
1. 2. 3. 4. Press [5] Press [ENT] Enter [User code] Press [4] for earlier events, [6] for later event