Text preview for : FB795B_10.pdf part of LG Flatron 795FT Plus Manual completo



Back to : FB 795B Flatron 795FT Plu | Home

DISASSEMBLY
1. TILT/SWIVEL REMOVAL 1) Set the monitor face downward. 2) Pressing the latch (a), carefully remove the Tilt/Swivel by pulling it upward.

(a)

2. BACK COVER REMOVAL 1) Remove four screws (a) from the Back Cover. 2) Slide the Back Cover away from the Front Cabinet of the monitor.

(a)

(a)

3. TOP SHIELD REMOVAL 1) Remove six screws (a). 2) Remove four screws (b). 3) Remove two screws (c). 4) Remove two screws (d).

(a) (b) (a) (a) (a) (a) (b) (a) (a) (c) (a) (d) (b) (d)

(b) (c)

- 11 -

4. TOTAL CHASSIS ASSEMBLY REMOVAL 1) Disconnect P903 (Degaussing pin), P704 (DY pin), P609 (Tilt pin), and P610 (Purity pin) from the Main PCB. 2) Disconnect P306 (GND Wire), P304,P305 from the Video PCB. 3) Carefully separate the CDT Board Assembly from the CDT neck. 4) Discharge the remaining static electricity by shorting between the Anode Cap and the CDT ground. 5) Disconnect the Anode Cap from the CDT. 6) Remove four screws (a). 7) Remove the Total Chassis Assembly from the Main Frame.

Anode Cap

P306

(a)

P304,P305 P704

P903

P609 P610

(a) (a)

(a)

5. VIDEO PCB ASSEMBLY REMOVAL 1) Disconnect P301, P303, P310, and P319 from the Video PCB. 2) Remove the Video PCB Assembly from the Interface Assembly.

6. BOTTOM BRACKET REMOVAL 1) Remove five screws (a). 2) Remove the Bottom Bracket.

(a)

P319 P301 P310 P303

(a) (a) (a)

Bottom Bracket

- 12 -

7. MAIN BRACKET & CONTROL PCB ASS'Y REMOVAL 1) Remove nine screws (a). 2) Remove two screws (b). 3) Carefully remove the Interface Assembly from the Main PCB Board. 4) Remove the Control PCB Assembly from the Main Mracket. 5) Release four latches (d) from the Main Board Assembly. 6) Remove the Bottom Bracket.

(a)
Interface Ass'y

(a) (a)

(a) (a) (a)

(a) (a)

(b) (b)

(a)

(a) (d)

Control PCB Ass'y

(d)
Main Bracket

8. INTERFACE ASSEMBLY REMOVAL 1) Remove five screws (a). 2) Remove Interface Rear Shield. 3) Remove three screws (b). 4) Remove the Interface Front Shield and Interface PCB.

Shield, Interface Rear

(a) (a) (b)
Interface PCB Total

(a) (a)

(a)

Shield, Interface Front

(b)

- 13 -