Text preview for : Yamaha-EMX660(2) pwrmix.pdf part of Yamaha EMX660 powered mixer (other ver.docs)



Back to : Yamaha-EMX660(2) pwrmix.p | Home

EMX660

POWERED MIXER

SERVICE MANUAL

CONTENTS SPECIFICATIONS ................................................ 3/5 DIMENSIONS ............................................................ 6 PANEL LAYOUT .................................... 7 BLOCK & LEVEL DIAGRAM ......................................... 10 CIRCUIT BOARD LAYOUT ............... 11 DISASSEMBLY PROCEDURE ............................ 12 LSI PIN DESCRIPTION .............................. 15 IC BLOCK DIAGRAM ................................. 17 INSPECTIONS ....................................................... 18/23 TROUBLE SHOOTING ............... 28 PARTS LIST OVERALL CIRCUIT DIAGRAM CIRCUIT BOARDS

This document is printed on chlorine free (ECF) paper with soy ink.

PA 011519
20000608-74800
1.45K-479

HAMAMATSU, JAPAN
Printed in Japan 2000.06

1

EMX660

IMPOR TANT NOTICE
This manual has been provided for the use of authorized Yamaha Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically Yamaha Products, are already known and understood by the users, and have therefore not been restated.

WARNING :

Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury, destruction of expensive components and failure of the product to perform as specified. For these reasons, we advise all Yamaha product owners that all service required should be performed by an authorized Yamaha Retailer or the appointed service representative. This presentation or sale of this manual to any individual or firm does not constitute authorization certification, recognition of any applicable technical capabilities, or establish a principal-agent relationship of any form.

IMPORTANT :

The data provided is belived to be accurate and applicable to the unit(s) indicated on the cover. The research engineering, and service departments of Yamaha are continually striving to improve Yamaha products. Modifications are, therefore, inevitable and changes in specification are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the distributor's Service Division.

WARNING : IMPORTANT :

Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulated by grounding yourself to the ground bus in the unit (heavy gauge black wires connect to this bus.) Turn the unit OFF during disassembly and parts replacement. Recheck all work before you apply power to the unit.

WARNING: CHEMICAL CONTENT NOTICE!
The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or plastic (Where applicable) components may also contain traces of chemicals found by the California Health and Welfare Agency (and possibly other entities) to cause cancer and/or birth defects or other reproductive harm. DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON WHAT SO EVER! Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/flux vapor! If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling food.

WARNING
Components having special characteristics are marked originally installed. and must be replaced with parts having specification equal to those

2

EMX660

SPECIFICATIONS
General specifications
Maximum output power 300 W + 300 W/4ohms @0.5% THD at 1 kHz (POWER AMP OUT 1, 2) 215 W + 215 W/8ohms @0.5% THD at 1 kHz (POWER AMP OUT 1, 2) 600 W/8ohms @0.5% THD at 1 kHz (BRIDGE) 20 Hz~20 kHz +1 dB, ­3 dB @1 W output into 8ohms (POWER AMP OUT) 20 Hz~20 kHz +1 dB, ­3 dB @+4 dB output into 10 kohms (MAIN OUT, MONITOR OUT, EFFECT SEND) Less than 0.5% @20 Hz~20 kHz, 150 W output into 4ohms (POWER AMP OUT 1, 2) Less than 0.3% @20 Hz~20 kHz, +14 dB output into 10 kohms (MAIN OUT, MONITOR OUT, EFFECT OUT) ­124 dB equivalent input noise, ­65 dB residual output noise (POWER AMP OUT) ­88 dB residual output noise (MAIN OUT, MONITOR OUT, EFFECT SEND) ­79 dB (83 dB S/N) MAIN OUT, MONITOR OUT ­69 dB (73 dB S/N) MAIN OUT, MONITOR OUT ­75 dB (79 dB S/N) EFFECT SEND ­69 dB (73 dB S/N) EFFECT SEND Master level control at nominal level and all channel level controls at minimum. Master level control at nominal level and 1 channel level control at nominal level. Master level control at nominal level and all channel level controls at minimum. Master level control at nominal level and 1 channel level control at nominal level.

Frequency response Total harmonic distortion

Hum & noise (Average, Rs=150) (with 20 Hz~20 kHz BPF)

Maximum voltage gain (PAD: OFF)

88 dB CH IN (Lo-Z) to POWER AMP OUT (CH1~4) 66 dB CH IN (Lo-Z) to MAIN OUT, MONITOR OUT (CH1~4) 72 dB CH IN (Lo-Z) to EFFECT OUT (CH1~4) 48 dB CH IN (Lo-Z) to REC OUT (CH1~4) 56 dB CH IN (Hi-Z) to MAIN OUT, MONITOR OUT (CH1~4) 26 dB AUX IN to MAIN OUT 24 dB TAPE IN to MAIN OUT 66 dB MIC IN to MAIN OUT, MONITOR OUT (CH5·6) 26 dB LINE IN to MAIN OUT, MONITOR OUT (CH5) 46 dB INST IN to MAIN OUT, MONITOR OUT (CH6) 65 dB adjacent input, 65 dB input to output ±15 dB Maximum HIGH 12 kHz shelving* MID 2.5 kHz peaking LOW 80 Hz shelving* * Turn over/roll-off frequency of shelving: 3 dB below maximum variable level. 5 POINTS LED METER (­10, ­5, 0, +3, +6 dB) (MAIN OUT, MONITOR OUT) 7 bands (125, 250, 500, 1 k, 2 k, 4 k, 8 kHz), ±12 dB Maximum (MAIN OUT, MONITOR OUT) 8 types (VO.ECHO 1, VO.ECHO 2, VO.REV. 1, VO.REV. 2, HALL 1, HALL 2, ROOM, PLATE) +15 V is supplied to electrically balanced inputs for powering condenser microphones via 2.4 kohms current limiting/isolation resisters. Comp. : THD0.5% (POWER AMP OUT) Turns on. : THD0.5% (POWER AMP OUT) POWER Switch on/off Mute, DC Detection, Temp (Heatsink Temp90°C) DIGITAL EFFECT MUTE : on/off USA and Canada Europe Other 250 W 497×275×275 mm 17 kg 120 V AC 60 Hz 230 V AC 50 Hz 240 V AC 50 Hz

Crosstalk at 1 kHz

Input channel equalization

Meters Graphic equalizer Internal digital effect Phantom power Limiter LIMIT indicators Protection Circuit (Power Amp.) Foot switch (FC-5) Power requirement Power consumption Dimensions (WxHxD) Weight · 0 dB=0.775 Vrms

3

EMX660

Input specifications
Input level Input connectors PAD Actual load impedance Nominal impedance Sensitivity1 Nominal level Max. before cliping ­20 dB (77.5 mV) XLR-3-31 type2 ­20 dB (77.5 mV) ­40 dB (7.75 mV) ­10 dB (245 mV) ­50 dB (2.45 mV) ­10 dB (245 mV) ­30 dB (24.5 mV) ­10 dB (245 mV) +10 dB (2.45 V) ­10 dB (245 mV) +20 dB (7.75 V) ­20 dB (77.5 mV) +20 dB (7.75 V) 0 dB (0.775 V) +20 dB (7.75 V) XLR-3-31 type2 Phone jack3 Phone jack3 Phone jack3 RCA phono jack3 Phone jack (TRS)2 600ohms Lines ­22 dB (61.6 mV) 3 kohms 10 kohms 470 kohms 10 kohms 10 kohms 50~600ohms Mics ­62 dB (0.616 mV) Connector type

CH INPUT (Lo-Z) (CH1~4)

OFF 3 kohms ON

50~600ohms ­62 dB (0.616 mV) Mics 600ohms Lines ­32 dB (19.5 mV) 50~600ohms Mics ­52 dB (1.95 mV)

­50 dB (2.45 mV)

CH INPUT (Hi-Z) (CH1~4)

OFF 10 kohms ON

MIC INPUT (CH5·6) LINE INPUT (CH5) (1, 2) INST INPUT (CH6) (1, 2) AUX IN TAPE IN (1, 2)

600ohms Lines ­22 dB (61.6 mV) 1 kohms ­42 dB (6.16 mV)

600ohms Lines ­22 dB (61.6 mV)

600ohms Lines ­22 dBV (79.4 mV) ­10 dBV (316 mV) +17.8 dBV (7.76 V)

1. Sensitivity is the lowest level that can produce an output of +4 dB (1.23 V) or the nominal output level when the unit is set at maximum gain. (All level controls are at maximum position.) 2. Balanced (T=Hot, R=Cold, S=Gnd) 3. Unbalanced · 0 dB=0.775 Vrms, 0 dBV=1 Vrms.

Output specifications
Output connectors Actual source impedance 0.1ohms 0.1ohms 600ohms 600ohms 600ohms 600ohms Nominal impedance 4/8ohms Speaker 8ohms Speaker 10 kohms Lines 10 kohms Lines 10 kohms Lines 10 kohms Lines Output level Connector type Nominal 60 W/4ohms 120 W/8ohms +4 dB (1.23 V) +4 dB (1.23 V) +4 dB (1.23 V) ­10 dBV (316 mV)
Max. before cliping

POWER AMP OUT (1·2) (A, B) BRIDGE OUT MAIN OUT MONITOR OUT EFFECT OUT REC OUT (1, 2)

(300 W/4ohms) (600 W/8ohms) +20 dB (7.75 V) +20 dB (7.75 V) +20 dB (7.75 V) +10 dBV (3.16 V)

Phone jack Phone jack Phone jack Phone jack Phone jack RCA phono jack

· All output jacks are unbalanced. · 0 dB=0.775 Vrms, 0 dBV=1 Vrms.

For European Model Purchaser/User Information specified in EN55103-1 and EN55103-2. Inrush Current: 56A Conformed Environment: E1, E2, E3 and E4

4

EMX660

5

EMX660

DIMENSIONS
W:497
(45.5) 259 H:275 (45.5) 168

45.5

380 487

45.5

16

57.5

150 D:275

(67.5)

Units: mm

6

EMX660

PANEL LAYOUT
Control panel Channel section

1
HIGH
­15 +15

MID

1
­15 +15

1 2 3 4 5

Equalizer controls (HIGH, MID, LOW) Monitor controls (MONI) Effect control (EFFECT) Level control (LEVEL) Pad switch (PAD) (Channel 1-4 only)

LOW

­15

+15

MONI

2
0 10

EFFECT

3
0 10

LEVEL

4
0 10

PAD

5

1
DIGITAL EFFECT section MONITOR section
8
VO. ECHO 1 VO. ECHO 2

VO. REV. 1

VO. REV. 2

+12 · 6 · 0 · 6 · ­12 125 250 500 1k 2k 4k 8k

+12 · 6 · 0 · 6 · ­12

+6 +3 0 ­5 ­10

12

HALL. 1

6 9 10
0 10 0 10 0 10

11
TAPE IN MASTER

HALL. 2

EFFECT RTN
ROOM

MONITOR

PLATE

ON

7

8 9 10 11 12

Graphic equalizer EFFECT RTN control TAPE IN control MASTER control Peak level indicator

DIGITAL EFFECT
6 Effect select switch and indicator 7 DIGITAL EFFECT ON switch and indicator

7

EMX660

MAIN section
+12 · 6 · 0 · 6 · ­12 125 250 500 1k 2k 4k 8k +12 · 6 · 0 · 6 · ­12

13

+6 +3 0 ­5 ­10

18

13 14 15 16 17 18

Graphic equalizer EFFECT RTN control AUX IN control TAPE IN MASTER control Peak level indicator

17
0 10 0 10 0 10 0 10

EFFECT RTN

AUX IN

TAPE IN

MASTER

MAIN
14 15 16

POWER AMP section

2AMPs 300W 300W
1
LIMITER
MAIN BRIDGE MAIN MAIN MAIN MONITOR

2

19 LIMITER indicator 20 Power amp select switch

19

20

POWER AMP

POWER indicator & PHANTOM section
21 POWER indicator 22 PHANTOM switch

21
ON OFF

POWER

PHANTOM

22

8

EMX660

Input/Output panel
Hi-Z Hi-Z Hi-Z Hi-Z 1 LINE 2 1 INST 2 EFFECT OUT
TAPE REC IN OUT MONITOR

1 Lo-Z Lo-Z Lo-Z Lo-Z MIC MIC FOOT SW
AUX IN

1
MAIN

2

2

SEE REAR PANEL CAUTION

EEEngine

INPUT

OUTPUT

1
1 2 3 4 5 6

2

3

4

5

6

Hi-Z, Lo-Z input jacks MIC, LINE, INST input jacks Effect output jack (EFFECT OUT) Foot switch jack (FOOT SW) External input jacks (AUX IN/TAPE IN) External output jacks (REC OUT/MONI-TOR/MAIN)

Rear panel
2 1

POWER

B

A

SPEAKERS

B

A

ON /

OFF

POWER AMP 2

BRIDGE

POWER AMP 1

1 Speaker output jacks (POWER AMP 1 A/B, POWER AMP 2 A/B,BRIDGE) 2 Power switch

9

CN301

CN101

2 4 5 7 5 7

CN901

3 1

2 4

3 1 3 1

IC706

SUB
1

1

2

2

IC601

3

3

IC601
7 5 7

CN301

CN901

CN101

3 1 1

IC603

5

7

2 4

3

3 1

IC603

2 4

IC704 IC705 IC801
7 7 5

IC703
6 7 8

BLOCK & LEVEL DIAGRAM

3 1

2 4 3 1

5

7

IC703
3 1

IC706

IC902 IC901 IC901
7 3 1 2 4 3 1 5

2 4

3 1

KEC-92542

CN101

2 4

5

IC201

CN101

10
IC101(CH1, 2) IC301(CH3, 4) IC701
1 2 4 3 1 3 3 1

EMX660

MIX
IC704 IC705

1

2

3

2 4

3 1

PWR

IC501
1

1

2

2

3

3

IC501 IC101

EMX660

CIRCUIT BOARD LAYOUT

PWR 1/3

PWR 1/3

PWR 2/3

Power transformer

MIX SUB MIX

11

EMX660

DISASSEMBLY PROCEDURE

1 1-1 1-2 1-3

1-4

MIX circuit board Remove the six (6) screws marked [30]. The panel assembly can then be removed. (Fig. 1) Remove the four (4) screws marked [P130]. The shield case can then be removed. (Fig. 1) Remove the forty-three (43) knobs, the thirteen (13) special hexagonal nuts and the thirteen (13) screws marked [P90]. (Fig. 1) Remove the twelve (12) screws marked [P40]. The MIX circuit board can then be removed. (Fig. 1)

2 2-1 2-2 2-3

SUB circuit board Remove the panel assembly. (See Procedure 1.) Remove the shield case. (See Procedure 1.) Remove the SUB circuit board from the seven(7) spacer supports marked [P110]. (Fig. 1)

Right side view
[50] [P130]

Front panel
[P40] [P40]

Left side view
[P130]

Power transformer [30]

[P110]

SUB

[P110] [30]

MIX
[P110]

[P130]

[P90]

[P90]

Hexagonal nut

[P90]

[P130]

Rear panel
[R180]

[70]

[70]

[R180]

[30]: [50]: [70]: [P40]:

Bind Head Screw 4.0X8 MFZN2BL (EG340360) Bind Head Screw SP 5.0X10 MFZN2BL (VU688100) Bind Head Screw 4.0X8 MFZN2BL (EG340360) Hexagonal Button Screw-P 3X25 MFZNBL (V3289800)

[P90]: Bonding Tapping Screw-B 3.0X8 MFZN2BL (VN413300) [P130]: Bonding Tapping Screw-B 3.0X8 MFZN2BL (VN413300) [R180]: Bind Head Tapping Screw-B 4.0X8 MFZN2BL (EG340190)

Fig.1

12

EMX660

3 3-1 3-2

3-3 3-4 3-5

PWR 1/3 circuit board Remove the panel assembly. (See Procedure 1.) Remove the two (2) connectors from the power transformer and the six (6) screws marked [70]. The rear assembly can then be removed. (Fig. 1) Remove the six (6) screws marked [R180]. The power unit can then be removed. (Fig. 1) Remove the sixteen (16) screws marked [R90]. TR support angle A/B can then be removed. (Fig. 2) Remove the six (6) screws marked [R40]. The PWR circuit board 1/3 can then be removed. (Fig. 2)
[R90] [R90]

Power unit

[R40]

PWR 1/3

[R40]

[R90]

[R90]

[R40]: Bind Head Screw SP 3.0X8 MFZN2Y (EG330290) [R90]: Bind Head Tapping Screw-B 3.0X12 MFZN2BL (VQ074600)

Fig.2

4 4-1 4-2 4-3

PWR 2/3 circuit board Remove the panel assembly. (See Procedure 1.) Remove the rear assembly. (See Procedure 3.) Remove the screw marked [R210] and the five (5) "special screws b". The PWR 2/3 circuit board can then be removed. (Fig. 3) PWR 3/3 circuit board Remove the panel assembly. (See Procedure 1.) Remove the rear assembly. (See Procedure 3.) Remove the two (2) screws marked [R150] and then remove the PWR 3/3 circuit board with the switch bracket. (Fig. 3) Remove the two (2) screws marked [R140] and the screw marked [R150a] from the switch bracket. The PWR 3/3 circuit board can then be removed. (Fig. 3)

5 5-1 5-2 5-3

5-4

13

EMX660

6 6-1 6-2 6-3 6-4

Motor fan Remove the panel assembly. (See Procedure 1.) Remove the rear assembly. (See Procedure 3.) Remove the power unit. (See Procedure 3.) Remove the two (2) screws marked [R120]. The motor fan can then be removed. (Fig. 3)

7 7-1 7-2 7-3

Power transformer Remove the panel assembly. (See Procedure 1.) Remove the rear assembly. (See Procedure 3.) Remove the four (4) screws marked [50]. The power transformer can then be removed. (Fig. 1)

Front panel
Power unit

[R120]

[R120]

Motor fan

PWR 3/3

PWR 2/3

[R150]

[R150a]

[R140]

[R150]

[R210]

Hexagonal nut

[R120]:

Bind Head Screw 3.0X30 ZMC2BL (VT520200)

[R140]: Bind Head Screw 3.0X8 MFZN2BL (VB659000) [R150a]: Bonding Tapping Screw-B 3.0X8 MFZN2BL (VN413300) [R150]: [R210]: Bonding Tapping Screw-B 3.0X8 MFZN2BL (VN413300) Bonding Tapping Screw-B 3.0X8 MFZN2BL (VN413300)

Fig.3

14

EMX660

LSI PIN DESCRIPTION
ZFX-2 (XY297A00) DSP PIN NAME I/O NO.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 ED2 ED3 ED4 ED5 ED6 ED7 VSS VDD CLKM0 CLKM1 TMS TDI TCK CLKIN VSS VDD CLKO EA12/ED8 EA13/ED9 EA14/ED10 EA15/ED11 VSS VDD EA16/ED12 EA17/ED13 EA18/ED14 EA19/ED15 EA4/ED16 EA5/ED17 EA6/ED18 EA7/ED19 VSS VDD EA8/ED20 EA9/ED21 EA10/ED22 EA11/ED23 TEST0 TEST1 TEST2 TEST3 /BIO /INT1 ARBC1 ARBC2 AX1 AX2 AX3 VSS VDD I/O I/O I/O I/O I/O I/O I I I I I I O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O I I I I I I I I O O O

SUB: IC306

FUNCTION
External Memory and I/O Data Bus

PIN NO.
51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100

NAME

I/O

FUNCTION
Host Interface Data Output/I2C Bus Data CMEM Update Buffer and HR Resistor Empty Flag Output Audio Data Transmitt Unit 2/3 Left and Right Channel Frame Frequency Signal Audio Data Receive Unit 1 Data Input Audio Data Receive Unit 2 Data Input Host Interface Receive Clock / I2C Bus Address 0 Host Interface Data Input/ I2C Bus Address 1 Host Interface Receive Data Frame Frequency Signal/ I2C Bus Address 2 Ground Power Supply Host Interface Transmitt Clock/ I2C Bus Clock Host Interface Transmitt Data Frame Frequency Signal/ I2C Bus Address 3 Host Interface Chip Select/ I2C Bus Address 4 HRBCK/HXBCK Active Edge Select/ I2C Bus Address 5 Host Interface Mode Select Ground Power Supply Audio Data Transmitt Unit 1 bit Clock Audio Data Transmitt Unit 2/3 bit Click Audio Data Transmitt Unit 1 Left and Right Channel Frame Frequency Signal Machine Clock Output then 8 min. Ruch ALU Overflow Frag Output Ruch MAC Overflow Frag Output Host Interface Transmitt Data Ready Frag Output Emurator Interrupt 0 Emurator Interrupt 1 TAP(Test Access Port) Data Output Machine Clock then512 min. Audio Data Receive Unit 1 Left and Right Channel Frame Frequency Signal Audio Data Receive Unit 2 Left and Right Channel Frame Frequency Signal Host Interface Data Format Select/ I2C Bus Address 6 Input Level Control Mute Control TAP(Test Access Port) Reset Hardware Reset Ground Power Supply External I/O Enable External DRAM Low Address Strove/External SRAM Chip Select External DRAM Culumn Address Strove/External SRAM Output Enable External ROM Enable External Memory and I/O Wright Enable External Memory and I/O Address Bus



Ground Power Supply Clock Mode
CLKM0 CLKM1 1 min. 3fold 5fold PLL BYPASS 0 1 0 1 0 0 1 1



TAP(Test Access Port) Mode Select TAP Data Input TAP Clock Master Clock Ground Power Supply Machine Clock Output External SRAM and ROM Address Bus/ External DRAM and I/O Data Bus

Ground Power Supply


External SRAM and ROM Address Bus/ External DRAM and I/O Data Bus

External Memory Address Bus/ External I/O Data Bus

Ground Power Supply


External Memory Address Bus/ External I/O Data Bus

Test Mode Control

Separate Control Input Interrupt 1 Audio Data Receive Unit 1 bit Clock Audio Data Receive Unit 2 bit Clock Audio Data Transmitt Unit 1 Data Output Audio Data Transmitt Unit 2 Data Output Audio Data Transmitt Unit 3 Data Output Ground Power Supply

HX/SDA I/O/Z /EMPTY O/Z AXLR2 I AR1 I AR2 I HRBCK/SA0 I HR/SA1 I HRS/SA2 I VSS VDD HXBCK/SCL I HXS/SA3 I /CS/SA4 I HBCKS/SA5 I I2CSEL I VSS VDD AXBC1 I AXBC2 I AXLR1 I DIV8 O /LAV O /LMV O /DRDY O/Z EMU0 I/O/Z EMU1 I/O/Z TDO O/Z DIV512 O ARLR1 I ARLR2 I HDIR/SA6 I SEL5V3V I /MUTE I /TRST I /RS I VSS VDD /IOE O /RAS/SRCS O /CAS/SROE O /ROME O /WE O EA0 O EA1 O EA2 O EA3 O VSS VDD ED0 I/O ED1 I/O



Ground Power Supply External Memory and I/O Data Bus

Z: High inpedance

15

EMX660

PCM3001E (XY282A00) ADA PIN NAME I/O FUNCTION NO.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 VINL Vcc1 AGND1 VREFL VREFR VINR CINPR CINNR CINNL CINPL VCOM VOUTR AGND2 VCC2 I I O ADC Analog input, L ch ADC Analog Power Supply ADC Analog Ground ADC Reference decuple, L ch ADC Reference Decuple, R ch ADC Analog input, R ch ADC Unch areasing Filter Capacitor (+), R ch ADC Unch areasing Filter Capacitor (-), R ch ADC Unch areasing Filter Capacitor (-), L ch ADC Unch areasing Filter Capacitor (+), L ch DAC Center Power Supply Decuple DAC Analog Output, R ch DAC Analog Ground DAC Analog Power Supply

SUB: IC305

PIN NO.
15 16 17 18 19 20 21 22 23 24 25 26 27 28

NAME
VOUTL LRCIN BCKIN DIN DOUT XTI XTO CLKIO VDD DGND FMT2 FMT1 FMT0 RSTB

I/O
O I I I O I O I/O I I I I

FUNCTION
DAC Analog Output, L ch Sampling Clock Input (fs) Bit Clock Input Audio Data Input Audio Data Output Crystal Oscillator Input, External System Clock Input Crystal Oscillator Output Crystal Oscillator Buffer Output, Externak System Clock Input Digital Power Supply Digital Ground Audio Data Format 2 (1) Audio Data Format 1 (1) Audio Data Format 0 (1) Reset Input, Active "L"

16

EMX660

IC BLOCK DIAGRAM

NJM2068L-D(XM356A00) NJM4558L-D(XQ212A00) N5238AP(XM085A00)
MIX: IC101, IC102, IC301, IC302, IC501, IC502, IC601, IC603, IC703, IC704, IC705, IC706, IC901 SUB: IC101, IC201, IC304

M5229P(XG203A00)
MIX: IC701, IC801

BA6137(XA534A00)
MIX: IC702, IC802

7Seg Grafic

LED Driver

IN1 NF1 IN2 NF2 IN3

1 560 2 3 560 4 5 560 6 7 560 8 9 560 10

- + 47k 10k

20 19

-Vcc GND +Vcc
1

+

+

+

+

+ +

OP AMP
+ +
B A

- + 47k

10k 18 17
2 3 4 5 6 7

Constant Current Circuit

8

9

OUTPUT INVERTED INPUT NON-INVERTED INPUT NF7 IN7 NF6 IN6

D1

D2

D3

D4

GND

D5

Amp Output

IN

VCC

- + 47k 47k - +

16 15

NF3 IN4

- + 47k 47k - + 47k 47k - + - + 14 13 12 11 10 9 8

14 13 12 11

1 OUT A

2 IN A

3

4 --V

5

6

7

8

+IN
A

+IN
B

IN OUT B B

+V

NF4 IN5 NF5

TC74HC138AP(IR013800)
MIX: IC902

TC74HCU04AP(IG142200)
SUB: IC302

DECO-8
A B C G2A G2B G1 Output Y7 GND 1 2 3 4 5 6 7 8 B C G2A G2B G1 A 16 Y0 Y1 Y2 Y3 Y4 15 14 13 12 11 10 9 Vcc Y0 Y1 Y2 Y3 Y4 Y5 Y6

Inverter
1 2 3 4 5 6 7

1A 1Y 2A 2Y Output 3A 3Y Vss

VDD 6A 6Y 5A 5Y 4A 4Y

Select

Enable

Y7 Y6 Y5

17

EMX660

INSPECTIONS
1. Measuring Instruments Low Frequency Oscillator: Oscilloscope: Level Meter: Note: Use a balance input measuring instrument : Signal level 0 dBs = 0.775V 2. Mixer Part Balance Output, Output Impedance = 150 ohms Input Impedance > 100 kohms = Input Impedance > 100 kohms =

2-1 Setting Conditions Setting conditions are as follows unless otherwise specified. 2-2 Input and Output Load Input Signal: Load: 2-3 Control Panel Setting Channel Input (CH1-CH4) Section EQ (HIGH, MID, LOW) level controls: MONITOR level control: EFFECT level control: LEVEL: PAD: Channel Input (CH5-CH6) Section EQ (HIGH, MID, LOW) level controls: MONITOR level control: EFFECT level control: LEVEL: EFFECT Section DIGITAL EFFECT ON switch MAIN Section GRAPHIC EQUALIZER (7 band) Fader: EFFECT RTN level control: AUX IN: TAPE IN: MASTER (MAIN): MONITOR Section GRAPHIC EQUALIZER (7 band) Fader: EFFECT RTN level control: TAPE IN Level control: MASTER (MAIN) level control: Others PHANTOM ON/OFF switch POWER AMP switch

1 kHz, sine wave (Rs = 150 ohms) All output terminals have a 10 k ohms load

Center Maximum Maximum Maximum OFF Center Maximum Maximum Maximum OFF Center Maximum Maximum Maximum Maximum Center Maximum Maxmum Maximum OFF MAIN/MONITOR

18

EMX660

2-4 Gain Each output gain should be as shown in the table below.
Table 1 Input Terminal Input Level MAIN OUT MONITOR OUT EFFECT OUT [Units: dBs] REC OUT

Lo-z MIC Hi-Z LINE INST AUX TAPE

-32 -32(PAD ON) -52 -22 -42 -22 -22

+4± 2 +4± 2 +4± 2 +4± 2 +4± 2 +4± 2

+4± 2 -

+4± 2 -

+13.8± 2 -

2-5 Frequency Response When the input signal frequency is set to 20 Hz and 20 kHz in Tables 1, each output terminal level should fall within the range of +1 and -3 dB, using 1 kHz as the reference. 2-6 Equalizer Characteristics When LOW, MID, HIGH GAIN VR's of CH1-6 are moved, the output level in each frequency obtained at MAIN OUT and MONITOR OUT should be in the range shown in the table below, using the output level at the center click position as reference. If the output level is not within the range as shown in the table, vary the specified frequency of the input signal within ±20% range and check that the output level as shown in the table below can be obtained. Table 2 EQ Controls LOW MID HIGH GAIN Maximum Minimum Maximum Minimum Maximum Minimum Frequency 80 Hz 2.5 kHz 12 kHz [Units: dBs] Response +12 ± 2 +12 ± 2 +14 ± 2 - 14 ± 2 +12 ± 2 +12 ± 2

2-7 Graphic Equalizer Characteristics When setting of the fader of the graphic equalizer is varied to the maximum and minimum positions, the output response for each frequency obtained at MAIN OUT and MONITOR OUT should be in the range shown in the table below using the output level at the center click position as a standard. If the output level is not within the range as shown in the table, vary the specified frequency of the input signal within ±20% range and check that the output level as shown in the table below can be obtained. Table 3 125 Hz Response Maximum Minimum Input signal frequency and Fader name 250 Hz 500 Hz 1 kHz 2 kHz +12 ± 2 -12 ± 2 [Units: dBs] 4 kHz 8 kHz

2-8 Meter LED When the MAIN OUT and MONITOR OUT output levels are as shown in the table below, each corresponding METER LED light should light up. Table 4 LED Name +6 +3 0 -5 -10 [Units: dBs] Lighting Level +10 ± 2 +7 ± 2 +4±2 -1 ± 2 -6 ± 2.5

19

EMX660

2-9 Distortion Set each volume control of the INPUT section and MASTER section to Nominal in Tables 1. When each output except the REC OUT level reaches +14 dBs, the distortion ratio should be less than 0.3 %. 2-10 Maximum Output Level In the states of 2-9, the maximum output levels of MAIN OUT, MONITOR OUT and EFFECT OUT should be +20 dBs with a distortion of less than 1%. 2-11 Equivalent Input Noise With the level volume of the channel being measured only set to the maximum position and those of other channels set to the minimum position and the input terminals of Lo-z and MIC shorted with 150ohms, check that the noise level at MAIN OUT is -58dBs or less (but -56dBs or less for CH6). If the noise level exceeds the specified value, check the converted input noise level at each channel. The acceptable level is -124dBs or less for CH1 to CH5 and -122 dBs or less for CH6. (Use DIN AUDIO FILTER.) 2-12 Residual Noise Set all the input level controls at minimum in the states of 2-3. When the MASTER and EFFECT OUT level controls in the MAIN and MONITOR section are changed to maximum or minimum, the residual noise should be as shown in the table below. Table 5 MASTER VOLUME Maximum Minimum [Unit: dBs] EFFECT OUT -73

MAIN OUTPUT -71 -88

MONITOR OUT -71 -88

2-13 Phantom Power Connect a load resistance of 2.7 K ohm (more than 1W) between pins 1 and 2 of both the Lo-z IN and the MIC IN input terminals, then short between pins 2 and 3 of the Lo-z IN and the MIC IN input terminal. When the PHANTOM switch is turned on, +10 ± 1.5 V should be obtained between both ends of the load resistance. 2-14 Digital Effect Turn on the power while pressing VO.ECHO1 and ON switches simultaneously and check that the ON LED light flashes. Input a -42dBs/1KHz signal to the CH6 INST, set the EFFECT level control and LEVEL control to the maximum position, and also set MASTER and EFFECT volumes of the MONITOR to the maximum position. Then check the signal level at the MONITOR OUT by selecting the PGM switch as described in Table 6 below. Table 6 PGM Switch VO. ECHO1 VO. ECHO2 VO.REV.1 VO.REV.2 HALL1 HALL2 ROOM PLATE [Unit: dBs]
Operation Press ON SW. Set LEVEL control to min. position. Depress FOOT SW. Check for: (at MONITOR OUT) No output (-53dBs or less) [DIN AUDIO] -53dBs or less [DINdBsDIO] Output obtained Output not obtained (-53dBs or less) [DIN AUDIO] -30dBs or less [DIN AUDIO] and full output are repeated every time FOOT SW is depressed. Output not obtained (-53dBs or less) [DIN AUDIO] 4.2 ±1dB attenuated from full output +10 ±3dBs of full output

Check that the LED light lights up when each PGM switch is selected. Also, check that the EFFECT is applied when the music source (vocal, etc.) is input. 2-15 Stability When a capacitor of 10 µF to 0.1 uF is connected in parallel to the loading resistor at each SPEAKER OUT terminal, or when all VR and EQ control volumes are set to MAX , there should be no abnormality; for example, there should be no oscillation. Especially, check that no oscillation occurs even if the EQ HIGH is at maximum.

20

EMX660

3.

Power Amplifier Part

3-1 Setting Conditions Setting conditions are as follows unless otherwise specified. Input terminal: POWER AMP switch: Output terminal: Output Load: INPUT CH5 LINE1 MAIN-MONITOR POWER AMP 1A, POWER AMP 2A 4 ohm (more than 300W) Connect the load resistor of SPEAKER OUT only when inspecting the power amplifier section unless otherwise specified. Minimum

INPUT CH1 - 4, CH6 LEVEL control:

3-2 Power ON Muting The muting relay should be released 2.5 +/- 1 seconds after the power switch is turned on. 3-3 Speaker Terminal DC Voltage When input terminals are grounded, confirm that each output terminal voltage is 0 +/- 100 mV. 3-4 Gain Check that +22 ± 2.0dBs output voltage is obtained when a -26dBs signal is input to the input terminal. Perform the same check under the setting conditions of POWER AMP switch at MAIN-MAIN and the output terminals at POWER AMP 1G and POWER AMP 2B. 3-5 Frequency Response Apply a -26dBs signal to the input terminal and check that the output voltage when the signal frequency is 20Hz and 20kHz is within +1 and -3dB ranges respectively, using the output voltage at 1kHz as reference. 3-6 Harmonic Distortion Apply a 1 kHz sine wave signal to the input; the output level should be 300 W/4 ohms (33.0 dBs/ch); the distortion ratio should be less than 0.5 %. Apply a sine wave signal of 20 Hz, 1 kHz and 20 kHz separately to the input; the output level should be 150 W/4 ohms (30.0 dBs); the distortion ratio should be less than 0.5 %. Do this inspection within 30 seconds. 3-7 Residual Noise Set the MASTER level controls (MONITOR and MAIN) at minimum; the residual noise at the output terminal should be less than -65 dBs. Note: Use DIN-AUDIO filter. 3-8 Stability Apply a 10 kHz -26 dBs rectangular signal to the input and connect a capacitor (10 pF to 0.47 µF) parallel to the 4 ohm load resistor, or connect an inductor (10 µH to 0.47 H) serial to the 4 ohms load resistor. Confirm that the output signal is as illustrated below. Overshoot: Vp/Vo < 1.8 = Ringing: 5 waves and less than 5 waves Vp Vo

Next, only connect a capacitor (10 pF to 0.47µF) to the SPEAKERS terminal as a load, and confirm that the output is as follows: Overshoot: Vp/Vo < 2.5 = Ringing: It should end within 7 waves; there is no oscillation.

21

EMX660

3-9 Protection Apply a 10 Hz sine wave signal to the input; increase the input signal so that the output signal is clipped. Confirm that the protection function operates and that the speaker relay does not open. When a 1 Hz, 6 Vp-p (8.7 dBs) sine wave signal is applied to the input, confirm that the protection function operates within 2 seconds and the speaker relay is turned off. When the input signal is turned off, confirm that the protection function stops and the speaker relay automatically turns on within 5 seconds. 3-10 PC Limiter and Limiter Apply a 1 kHz -20 dBs sine wave signal to the input and then connect a 1 ohm ( +/- 5% 100 W) resistor; confirm that the output signal is Vp-p < 25V and that the signal is not rectangular. = 3-11 LIMITER Indicator When a 1 kHz -10.8 dBs sine wave signal is applied to the input, the LIMITER indicator should light up. 3-12 Efficiency When the output of POEWR AMP1 and 2 is adjuster to 12.2V (24.0 dBs), confirm that the primary power is 180 +/- 50W. 4. Main Bridge

4-1 Setting Conditions Input Terminal: POWER AMP switch: Measuring Output Terminal: Output Load:

INPUT CH 5 LINE 1 MAIN BRIDGE BRIDGE 8 ohm (more than 600 W)

INPUT CH 1- 4, CH 6 LEVEL level control: Minimum Note: Other control settings are the same as those for the mixer in section 2-3. 4-2 Connection Tip 4 ohms Phone Plug 4 ohms Sleeve

Measuring instruments input Measuring instruments ground

4-3 Gain Apply a 1 kHz -26.0 dBs sine wave signal to the input; confirm that the output levels is are +22.0 ± 2 dBs. 4-4 Frequency Response Apply a -26dBs signal to the input terminal and check that the output voltage when the signal frequency is 20Hz and 20kHz is within +1 and -6dB ranges respectively, using the output voltage at 1kHz as reference. 5. Power Supply Fluctuation There should be no operational problems when the power voltage is varied within +/- 10% of the nominal voltage.

22

EMX660

23

EMX660

24

EMX660

25

EMX660

26

EMX660

27

EMX660

TROUBLE SHOOTING
Problem Cause Action

The POWER indicator is dark.

Please wait. When the device cools off, normal operation will resume automatically. However, please check the following two points to prevent the The load on this device was too great, and the protection circuit for the inter- problem from recurring. If the input to this device is greater than the nominal nal transformer has operated. Possilevel, lower the input to the nominal level. If the ble reasons for the excessive load are an excessive input to the device, or inap- device is not ventilated sufficiently, refer to the cautions given at the beginning of this manual and take propriate ventilation. appropriate measures to insure adequate ventilation.

Sound is no longer output from the speakers.

Please wait. When the device cools off, normal operation will resume automatically. However, please check the following three points to prevent The load on the amplifier of this device the problem from recurring. If the level setting is excessive, lower it to the nomiwas too great, and the protection cirnal level. You can refer to the peak level indicators cuit for the amplifier has operated. The POWER Possible reasons for the excessive load of the main section when doing so. If the device is not ventilated sufficiently, refer to the indicator is lit. are an excessive level setting in the channel control section or main section, cautions given at the beginning of this manual and take appropriate measures to insure adequate veninsufficient ventilation, or insufficient load impedance of the connected speak- tilation. If the load impedance (including a short) is too low, ers. and change the connections so that the impedance is correct. Connections between devices have come loose. Other Inspect the connections, and correct any faulty connections. The device may have malfunctioned.

Other

28

POWERED MIXER

PARTS LIST
CONTENTS OVERALL ASSEMBLY ELECTRICAL PARTS .............................................. 2 ............................................. 5
Notes : DESTINATION ABBREVIATIONS A : Australian model B : British model C : Canadian model D : German model E : European model F : French model H : North European model I : Indonesian model J : Japanese model M : South African model O : Chinese model Q : South-east Asia model T : Taiwan model U : U.S.A. model V : General export model (110V) W: General export model (220) N,X : General export model Y : Export model

WARNING
Components having special characteristics are marked specification equal to those originally installed. and must be replaced with parts having

The numbers "QTY" show quantities for each unit. The parts with "--" in "PART NO." are not available as spare parts. This mark " } " in the REMARKS column means these parts are interchangeable. ) part number is O, not zero. The second letter of the shaded ( ) part number is I, not one. The second letter of the shaded (

EMX660

OVERALL ASSEMBLY
60 R220 R80 R20 R90 R90 R210 R60 R10 R170 R230 R100 R180 R120 R110 R160

100 R230 R220 R30 2/3 R50 R70 R40 R30 1/3 R90 R30 3/3 R130 R150 R200 70 R140 R190 R150 110

B80 B70 40 50 B30 B40

B10 B20

B90

B110 P130 P40 P30 P100 B60 B120 B50 P50 P140 P110 P60 P120 P70 P80 P180 10

B100

90

P90

P70 P60 P80 P90 P10

P20 20

30

2

EMX660

REF NO.

PART NO. -----V5288600 -EG340360 XY325B00 XY326A00 XY327B00 XY328A00 VU688100 -----EG340360 VZ765100 -VA039300 V5288600 ---VV102700 -EG340330 VV085400 VV435200 VV085500 03747270 VV085600 03747290 -V5209800 V5110900 V3291600 V3289800 VU860200 VU859700

*

* * * *

10 20 30 40 40 40 40 50 60 60 60 60 60 70 90 100 110

DESCRIPTION OVERALL ASSEMBLY Overall Assembly Overall Assembly Overall Assembly Overall Assembly Overall Assembly Body Assembly Panel Assembly Bind Head Screw Power Transformer Power Transforme Power Transforme Power Transforme Bind Head Screw Rear Assembly Rear Assembly Rear Assembly Rear Assembly Rear Assembly Bind Head Screw Cord Binder Cord, Front Label Body Assembly Body Carpet Shield Sheet Side Plate (L) Side Plate (R) Bind Head Screw Glip Assembly Oval Head Screw Corner Protector Truss Head Tapping Screw-1 Leg Truss Head Tapping Screw-1 Panel Assembly Front Panel Circuit Board PCB Support Hexagonal Button Screw-P Knob Knob

EMX660 J U,V H,W B A

REMARKS (V521540) (V521700) (V521720) (V521740) (V521760) (V521780) (V528870)

QTY

RANK

4.0X8 MFZN2BL J U,V H,W,B A SP 5.0X10 MFZN2BL J U,V H,W B A 4.0X8 MFZN2BL TS-0708 KSS 1430 #24 14P 500L UV (V528880) (V528960) (V528970) (V528980) (V528990)

6

01

4

01

6 (V522900)

01 02 03

* B10 B20 B30 B40 B50 B60 B70 B80 B90 B100 B110 B120

C968

(V520960) (VZ52800) (VV43470) (V520970)

2 06

4.0X18 MFZN2BL 5.0X35 MFZN2BL 4.0X12 MFZN2BL 4.0X20 MFZN2BL (V528870) MIX NEW NIFCO 3X25 MFZNBL MX-GREEN/D-GRAY N-GRAY/D-GRAY

10 2 8 16 8 8

01 04 01 03 01 01

* *

P10 P20 P30 P40 P50 P60

P70

VU860300 Knob

MX-BLUE/D-GRAY

P80 P90 * P100 P110 P120 P130 * P140 P180

VV625800 Knob VN413300 V5111000 V3224800 -VN413300 V5210000 ------V5210400 V5210700 V5211700 V5212300 -Bonding Tapping Screw-B Circuit Board Spacer Support Shield Case Bonding Tapping Screw-B DSP Select Button Cable, FFC Rear Assembly Rear Assembly Rear Assembly Rear Assembly Rear Assembly Rear Panel Rear Panel Rear Panel Rear Panel Heat Sink

ORANGE/D-GRAY 3.0X8 MFZN2BL SUB KCA-14 PIN GOO

CH1-6(HIGH,MID,LOW) CH1-6(MONI), MONI.(TAPE IN,MASTER), MAIN(AUX IN,TAPE IN) CH1-6(EFFECT), MONI.(EFFECT RTN), MAIN(EFFECT RTN) CH1-6(LEVEL), MAIN(MASTER)

12 12 18 10

01 01 01 01

8

01

7 13 7

01 01 01 01

(V520990) 3.0X8 MFZN2BL DIGITAL EFFECT BNCDP=1.25K-35-90 J U,V H,W B A J U,V H,W,B A (V430430) (V528880) (V528960) (V528970) (V528980) (V528990) 4

* * * *

R10 R10 R10 R10 R20

(V521290) RANK: Japan only

: New Parts

3

EMX660

REF NO.

R30 R30 R30 R40 R50 R60 R70 * R80 R90 R100 R110 R120 R130 R140 R150 R160 R160 R160 R160 R170 R180 R190 R200 R210 R220 R230 * * *

PART NO. V5227100 V5227200 V5227300 EG330290 VV086500 --V5214900 VQ074600 V2955500 V2951400 VT229100 -VB659000 VN413300 V3277000 VV205600 V3277100 VV058300 VV103100 EG340190 VU859000 VP156800 VN413300 V4773400 EG340190

DESCRIPTION Circuit Board Circuit Board Circuit Board Bind Head Screw Support Angle A Angle B Insulation Sheet Bind Head Tapping Screw-B Fan Angle Bracket, Fan Bind Head Screw Switch Bracket Bind Head Screw Bonding Tapping Screw-B AC Cord AC Cord AC Cord AC Cord Cord Strain Relief Bind Head Tapping Screw-B Power Switch Knob Bind Head Screw Bonding Tapping Screw-B Holder, Cord Bind Head Tapping Screw-B

REMARKS PWR PWR PWR SP 3.0X8 MFZN2Y H=7.4 B=5.5 J U,V H,W,B,A

QTY

RANK

6 6 (V521320) (V521330)

01 01

3.0X12 MFZN2BL 3110KL05WB50L34 4.0X30 ZMC2BL (V319280) 3.0X8 MFZN2BL 3.0X8 MFZN2BL J VCTF 2X0.75 7A UC SJT 3X#18 10A E H05VV-F3X0.7510A BS H05VV-F3X0.75 SR-6P1 4.0X8 MFZN2BL MX12/4 A4.0X8 MFZN2BL 3.0X8 MFZN2BL 4.0X8 MFZN2BL

2 16

2 2 3 J U,V H,W,A B 6 POWER ON/OFF U,V,H,W,B,A 2 2

01 08 03 01 01 01 05 06 06 08 01 01 01 01 01 01

: New Parts

RANK: Japan only

4

EMX660

ELECTRICAL PARTS
REF NO.

PART NO. V5110900 V5111000 V5227100 V5227200 V5227300 V5110900 VV307300 VZ968500 VV291400 UR877470 VV488800 VV488800 VZ353800 VZ353800 VZ353800 UR828470 VZ353500 VZ353500 UR877100 UA954270 UA953560 UA953820 UA953220 VZ353500 VZ352900 UR857470 UR877100 UR877100 VZ354000 VZ354000 VZ353900 UR877470 VV488800 VV488800 VZ353800 VZ353800 UR828470 VZ353500 VZ353500 UR877100 UA954270 UA953560 UA953820 UA953220 VZ353500 VZ352900 UR857470 UR877100 UR877100 UR877470 VV488800 VV488800 VZ353800 VZ353800 VZ353800 UR828470 VZ353500 VZ353500 UR877100 UA954270 UA953560 UA953820 UA953220 VZ353500 VZ352900 UR857470 UR877100 UR877100

* * * * * *

DESCRIPTION ELECTRICAL PARTS Circuit Board Circuit Board Circuit Board Circuit Board Circuit Board Circuit Board LED Spacer Button Jumper Wire Electrolytic Cap. Electrolytic Cap.-LLM Electrolytic Cap.-LLM Ceramic Cap.-B Ceramic Cap.-B Ceramic Cap.-B Electrolytic Cap. Ceramic Capacitor-SL Ceramic Capacitor-SL Electrolytic Cap. Mylar Capacitor Mylar Capacitor Mylar Capacitor Mylar Capacitor Ceramic Capacitor-SL Ceramic Capacitor-SL Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Ceramic Capacitor-F Ceramic Capacitor-F Ceramic Cap.-B Electrolytic Cap. Electrolytic Cap.-LLM Electrolytic Cap.-LLM Ceramic Cap.-B Ceramic Cap.-B Electrolytic Cap. Ceramic Capacitor-SL Ceramic Capacitor-SL Electrolytic Cap. Mylar Capacitor Mylar Capacitor Mylar Capacitor Mylar Capacitor Ceramic Capacitor-SL Ceramic Capacitor-SL Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Electrolytic Cap.-LLM Electrolytic Cap.-LLM Ceramic Cap.-B Ceramic Cap.-B Ceramic Cap.-B Electrolytic Cap. Ceramic Capacitor-SL Ceramic Capacitor-SL Electrolytic Cap. Mylar Capacitor Mylar Capacitor Mylar Capacitor Mylar Capacitor Ceramic Capacitor-SL Ceramic Capacitor-SL Electrolytic Cap. Electrolytic Cap. Electrolytic Cap.

REMARKS EMX660 MIX SUB PWR PWR PWR MIX MX12/4 NO.947 CD-GRAY 0.6 47.00 63.0V 10.00 50.0V 10.00 50.0V 470P 50V K 470P 50V K 470P 50V K 470.00 10.0V 100P 50V J 100P 50V J 10.00 63.0V 0.027 50V J 5600P 50V J 8200P 50V J 2200P 50V J 100P 50V J 27P 50V J 47.00 35.0V 10.00 63.0V 10.00 63.0V 0.01 50V Z 0.01 50V Z 1000P 50V K 47.00 63.0V 10.00 50.0V 10.00 50.0V 470P 50V K 470P 50V K 470.00 10.0V 100P 50V J 100P 50V J 10.00 63.0V 0.027 50V J 5600P 50V J 8200P 50V J 2200P 50V J 100P 50V J 27P 50V J 47.00 35.0V 10.00 63.0V 10.00 63.0V 47.00 63.0V 10.00 50.0V 10.00 50.0V 470P 50V K 470P 50V K 470P 50V K 470.00 10.0V 100P 50V J 100P 50V J 10.00 63.0V 0.027 50V J 5600P 50V J 8200P 50V J 2200P 50V J 100P 50V J 27P 50V J 47.00 35.0V 10.00 63.0V 10.00 63.0V (XY280A00) (XY281A00) (XY324A00) (XY324A00) (XY324A00) (XY280A00) PAD

QTY

RANK

J U,V H,W,B,A

22 4 200

01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01

C101 C102 C103 C104 -106 C107 C108 C109 C111 -112 C113 C114 * C115 C116 C117 C118 C119 C120 C121 C122 -125 C126 C201 C202 C203 C204 -207 C208 C209 -211 C212 C213 C214 * C215 C216 C217 C218 C219 C220 C221 C301 C302 C303 C304 C305 -307 C308 C309 -311 C312 C313 C314 * C315 C316 C317 C318 C319 C320 C321

: New Parts

RANK: Japan only

5

EMX660

REF NO.

C322 -325 C326 C401 C402 C403 C404 -407 C408 C409 -411 C412 C413 C414 * C415 C416 C417 C418 C419 C420 C421 C501 C502 C503 C504 -507 C508 C509 -511 C512 C513 C514 * C515 C516 C517 C518 C519 C520 C521 C522 C523 C524 C526 C527 -530 C601 C602 C603 C604 -607 C608 C609 -611 C612 C613 C614 * C615 C616 C617 C618 C619 C622 C623 C624 C626 C627 -630 C631 C632 C633

PART NO. VZ354000 VZ354000 VZ353900 UR877470 VV488800 VV488800 VZ353800 VZ353800 UR828470 VZ353500 VZ353500 UR877100 UA954270 UA953560 UA953820 UA953220 VZ353500 VZ352900 UR857470 UR877100 UR877100 UR877470 VV488800 VV488800 VZ353800 VZ353800 UR828470 VZ353500 VZ353500 UR877100 UA954270 UA953560 UA953820 UA953220 VZ353500 VZ352900 UR857470 UR877100 UR877100 VZ353500 VZ353200 UR877100 VZ353900 VZ354000 VZ354000 UR877470 VV488800 VV488800 VZ353800 VZ353800 UR828470 VZ353500 VZ353500 UR877100 UA954270 UA953560 UA953820 UA953220 VZ353500 VZ352900 UR857470 VZ353500 VZ353200 UR877100 VZ353900 VZ354000 VZ354000 UR877100 UR877100 VZ353200

DESCRIPTION Ceramic Capacitor-F Ceramic Capacitor-F Ceramic Cap.-B Electrolytic Cap. Electrolytic Cap.-LLM Electrolytic Cap.-LLM Ceramic Cap.-B Ceramic Cap.-B Electrolytic Cap. Ceramic Capacitor-SL Ceramic Capacitor-SL Electrolytic Cap. Mylar Capacitor Mylar Capacitor Mylar Capacitor Mylar Capacitor Ceramic Capacitor-SL Ceramic Capacitor-SL Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Electrolytic Cap.-LLM Electrolytic Cap.-LLM Ceramic Cap.-B Ceramic Cap.-B Electrolytic Cap. Ceramic Capacitor-SL Ceramic Capacitor-SL Electrolytic Cap. Mylar Capacitor Mylar Capacitor Mylar Capacitor Mylar Capacitor Ceramic Capacitor-SL Ceramic Capacitor-SL Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Ceramic Capacitor-SL Ceramic Capacitor-SL Electrolytic Cap. Ceramic Cap.-B Ceramic Capacitor-F Ceramic Capacitor-F Electrolytic Cap. Electrolytic Cap.-LLM Electrolytic Cap.-LLM Ceramic Cap.-B Ceramic Cap.-B Electrolytic Cap. Ceramic Capacitor-SL Ceramic Capacitor-SL Electrolytic Cap. Mylar Capacitor Mylar Capacitor Mylar Capacitor Mylar Capacitor Ceramic Capacitor-SL Ceramic Capacitor-SL Electrolytic Cap. Ceramic Capacitor-SL Ceramic Capacitor-SL Electrolytic Cap. Ceramic Cap.-B Ceramic Capacitor-F Ceramic Capacitor-F Electrolytic Cap. Electrolytic Cap. Ceramic Capacitor-SL

REMARKS 0.01 50V Z 0.01 50V Z 1000P 50V K 47.00 63.0V 10.00 50.0V 10.00 50.0V 470P 50V K 470P 50V K 470.00 10.0V 100P 50V J 100P 50V J 10.00 63.0V 0.027 50V J 5600P 50V J 8200P 50V J 2200P 50V J 100P 50V J 27P 50V J 47.00 35.0V 10.00 63.0V 10.00 63.0V 47.00 63.0V 10.00 50.0V 10.00 50.0V 470P 50V K 470P 50V K 470.00 10.0V 100P 50V J 100P 50V J 10.00 63.0V 0.027 50V J 5600P 50V J 8200P 50V J 2200P 50V J 100P 50V J 27P 50V J 47.00 35.0V 10.00 63.0V 10.00 63.0V 100P 50V J 47P 50V J 10.00 63.0V 1000P 50V K 0.01 50V Z 0.01 50V Z 47.00 63.0V 10.00 50.0V 10.00 50.0V 470P 50V K 470P 50V K 470.00 10.0V 100P 50V J 100P 50V J 10.00 63.0V 0.027 50V J 5600P 50V J 8200P 50V J 2200P 50V J 100P 50V J 27P 50V J 47.00 35.0V 100P 50V J 47P 50V J 10.00 63.0V 1000P 50V K 0.01 50V Z 0.01 50V Z 10.00 63.0V 10.00 63.0V 47P 50V J

QTY

RANK

01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 RANK: Japan only

: New Parts

6

EMX660

REF NO.

C634 C635 C636 C637 C638 C639 C640 C702 C703 C704 C705 C706 C708 C709 C710 C711 C712 C713 C714 C716 C717 C718 C719 C720 C721 C722 C723 C724 C725 C726 C727 C728 C729 C730 C731 C732 C733 C734 C736 C737 C738 C741 -748 C751 C752 C753 C754 C802 C803 C804 C805 C806 C808 C809 C810 C811 C812 C813 C814 C816 C817 C818 C819 C820 C821 C822 C823 C824 C825 C826

PART NO. VZ353200 VZ353500 VZ353500 VZ352800 VZ352800 UR877100 UR877100 UR838100 VZ353600 VZ352600 UR877100 VZ353900 VZ353600 VZ352700 UR857470 UR877100 VZ353600 VZ353400 VZ353900 UA655820 UA954820 UA655470 UA954390 UA655220 UA954180 UA655100 UA954100 UA954470 UA953470 UA954270 UA953220 UA954120 UA953120 VZ354000 VZ354000 VZ353800 UR857470 UR877100 VZ353600 VZ353400 UR857470 VZ354000 VZ354000 UR877100 VZ353500 VZ353500 UR877100 UR838100 VZ353600 VZ352600 UR877100 VZ353900 VZ353600 VZ352700 UR877100 UR877100 VZ353600 VZ353400 VZ353900 UA655820 UA954820 UA655470 UA954390 UA655220 UA954180 UA655100 UA954100 UA954470 UA953470 UA954270

DESCRIPTION Ceramic Capacitor-SL Ceramic Capacitor-SL Ceramic Capacitor-SL Ceramic Capacitor-SL Ceramic Capacitor-SL Electrolytic Cap. Electrolytic Cap. Electrolytic Cap. Ceramic Cap.-B Ceramic Capacitor-SL Electrolytic Cap. Ceramic Cap.-B Ceramic Cap.-B Ceramic Capacitor-SL Electrolytic Cap. Electrolytic Cap. Ceramic Cap.-B Ceramic Capacitor-SL Ceramic Cap.-B Mylar Capacitor Mylar Capacitor Mylar Capacitor Mylar Capacitor Mylar Capacitor Mylar Capacitor Mylar Capacitor Mylar Capacitor Mylar Capacitor Mylar Capacitor Mylar Capacitor Mylar Capacitor Mylar Capacitor Mylar Capacitor Ceramic Capacitor-F Ceramic Capacitor-F Ceramic Cap.-B Electrolytic Cap. Electrolytic Cap. Ceramic Cap.-B Ceramic Capacitor-SL Electrolytic Cap. Ceramic Capacitor-F Ceramic Capacitor-F Electrolytic Cap. Ceramic Capacitor-SL Ceramic Capacitor-SL Electrolytic Cap. Electrolytic Cap. Ceramic Cap.-B Ceramic Capacitor-SL Electrolytic Cap. Ceramic Cap.-B Ceramic Cap.-B Ceramic Capacitor-SL Electrolytic Cap. Electrolytic Cap. Ceramic Cap.-B Ceramic Capacitor-SL Ceramic Cap.-B Mylar Capacitor Mylar Capacitor Mylar Capacitor Mylar Capacitor Mylar Capacitor Mylar Capacitor Mylar Capacitor Mylar Capacitor Mylar Capacitor Mylar Capacitor Mylar Capacitor

REMARKS 47P 50V J 100P 50V J 100P 50V J 22P 50V J 22P 50V J 10.00 63.0V 10.00 63.0V 100.00 16.0V 220P 50V K 6P 50V J 10.00 63.0V 1000P 50V K 220P 50V K 10P 50V J 47.00 35.0V 10.00 63.0V 220P 50V K 68P 50V J 1000P 50V K 0.82 50V J 0.082 50V J 0.47 50V J 0.039 50V J 0.22 50V J 0.018 50V J 0.1 50V J 0.01 50V J 0.047 50V J 4700P 50V J 0.027 50V J 2200P 50V J 0.012 50V J 1200P 50V J 0.01 50V Z 0.01 50V Z 470P 50V K 47.00 35.0V 10.00 63.0V 220P 50V K 68P 50V J 47.00 35.0V 0.01 50V Z 0.01 50V Z 10.00 63.0V 100P 50V J 100P 50V J 10.00 63.0V 100.00 16.0V 220P 50V K 6P 50V J 10.00 63.0V 1000P 50V K 220P 50V K 10P 50V J 10.00 63.0V 10.00 63.0V 220P 50V K 68P 50V J 1000P 50V K 0.82 50V J 0.082 50V J 0.47 50V J 0.039 50V J 0.22 50V J 0.018 50V J 0.1 50V J 0.01 50V J 0.047 50V J 4700P 50V J 0.027 50V J

QTY

RANK

01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 RANK: Japan only

: New Parts

7

EMX660

REF NO.

C827 C828 C829 C830 C831 C832 C833 C834 C901 C902 C903 C904 C905 C906 C907 C908 C909 C910 C911 C912 CN901 D601 -604 D901 D902 EM901 IC101 IC102 IC301 IC302 IC501 IC502 IC601 IC603 IC701 IC702 IC703 IC704 IC705 IC706 IC801 IC802 IC901 IC902 J1 JK101 JK102 JK201 JK202 JK301 JK302 JK401 JK402 JK501 JK502 JK503 JK601 JK602 JK603 JK701 * JK702 JK703 JK801 JK901 JK902 LD701 -703 LD704 LD705 LD801

PART NO. UA953220 UA954120 UA953120 VZ354000 VZ354000 VZ353800 UR857470 UR877100 VZ353600 VZ352600 UR877100 UR877100 VZ353600 VZ353400 UR857470 VZ354000 VZ354000 UR858100 VZ354600 VZ354600 VQ048400 VD631600 VD631600 VD631600 VD631600 VV056900 XM356A00 XQ212A00 XM356A00 XQ212A00 XM356A00 XQ212A00 XM356A00 XM085A00 XG203A00 XA534A00 XM356A00 XM356A00 XM356A00 XM356A00 XG203A00 XA534A00 XM356A00 IR013800 VV291400 VU805200 V2954500 VU805200 V2954500 VU805200 V2954500 VU805200 V2954500 VU805200 V2954500 V2954500 VU805200 V2954500 V2954500 V2954500 V4807600 V2954500 V2954500 V2954500 V2954500 VV938100 VV938100 VV621000 VV621000 VV938100

DESCRIPTION Mylar Capacitor Mylar Capacitor Mylar Capacitor Ceramic Capacitor-F Ceramic Capacitor-F Ceramic Cap.-B Electrolytic Cap. Electrolytic Cap. Ceramic Cap.-B Ceramic Capacitor-SL Electrolytic Cap. Electrolytic Cap. Ceramic Cap.-B Ceramic Capacitor-SL Electrolytic Cap. Ceramic Capacitor-F Ceramic Capacitor-F Electrolytic Cap. Monolithic Ceramic Cap. Monolithic Ceramic Cap. Connector, FFC Diode Diode Diode Diode Filter, EMI IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC Jumper Wire XLM Connector Phone Jack XLM Connector Phone Jack XLM Connector Phone Jack XLM Connector Phone Jack XLM Connector Phone Jack Phone Jack XLM Connector Phone Jack Phone Jack Phone Jack Pin Connector Phone Jack Phone Jack Phone Jack Phone Jack LED LED LED LED LED

REMARKS 2200P 50V J 0.012 50V J 1200P 50V J 0.01 50V Z 0.01 50V Z 470P 50V K 47.00 35.0V 10.00 63.0V 220P 50V K 6P 50V J 10.00 63.0V 10.00 63.0V 220P 50V K 68P 50V J 47.00 35.0V 0.01 50V Z 0.01 50V Z 100.00 35.0V 0.1 50V Z 0.1 50V Z 52045series 35P TE 1SS133,176,HSS104 1SS133,176,HSS104 1SS133,176,HSS104 1SS133,176,HSS104 ZJSR5101-223TA NJM2068L-D NJM4558L-D NJM2068L-D NJM4558L-D NJM2068L-D NJM4558L-D NJM2068L-D M5238AP M5229P BA6137 NJM2068L-D NJM2068L-D NJM2068L-D NJM2068L-D M5229P BA6137 NJM2068L-D TC74HC138AP 0.6 XLR-Jack NC3FAV1-0 LJ-0695-4R-A XLR-Jack NC3FAV1-0 LJ-0695-4R-A XLR-Jack NC3FAV1-0 LJ-0695-4R-A XLR-Jack NC3FAV1-0 LJ-0695-4R-A XLR-Jack NC3FAV1-0 LJ-0695-4R-A LJ-0695-4R-A XLR-Jack NC3FAV1-0 LJ-0695-4R-A LJ-0695-4R-A LJ-0695-4R-A RJ-1130A-01-0320A LJ-0695-4R-A LJ-0695-4R-A LJ-0695-4R-A LJ-0695-4R-A LT331-41-C13 (YE) LT331-41-C13 (YE) LT321-41-C13 (GR) LT321-41-C13 (GR) LT331-41-C13 (YE)

QTY

RANK

01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 02 03 02 03 02 03 02 03 04 03 02 02 02 02 04 03 02 02 01 04 02 04 02 04 02 04 02 04 02 02 04 02 02 02 02 02 02 02 01 01 01 01 01

OP AMP OP AMP OP AMP OP AMP OP AMP OP AMP OP AMP OP AMP 7Seg Grafic LED Driver OP AMP OP AMP OP AMP OP AMP 7Seg Grafic LED Driver OP AMP DECO-8 22 CH1(Lo-Z) CH1(Hi-Z) CH2(Lo-Z) CH2(Hi-Z) CH3(Lo-Z) CH3(Hi-Z) CH4(Lo-Z) CH4(Hi-Z) CH5(MIC) CH5(LINq) CH5(LINEw) CH6(MIC) CH6(LINq) CH6(LINw) OUTPUT(MAIN) TAPE IN,REC OUT(q,w) INPUT(AUX IN) OUTPUT(MONITOR) EFFECT OUT FOOT SW MAIN(+6,+3,0) MAIN(-5) MAIN(-10) MONITOR(+6,+3,0)

: New Parts

RANK: Japan only

8

EMX660

REF NO.

-803 LD804 LD805 LD901 -908 LD909 LD910 LD911 LD912 Q101 Q102 Q201 Q202 Q301 Q302 Q401 Q402 Q501 Q502 Q601 Q602 Q901 R101 R102 R103 R104 R105 R106 R107 R108 R109 R110 R111 R112 R113 R114 R115 R116 R117 R118 R119 R120 R121 R122 R123 R124 R125 R126 R127 R128 R129 -131 R132 R133 R134 R135 R201 R202 R203 R204 R205 R206 R207 R208 R209 R210 R211 R212 R213

PART NO. VV938100 VV621000 VV621000 VV621000 VV621000 VV938100 VV621000 VV620800 VV620800 IC224030 IC224030 IC224030 IC224030 IC224030 IC224030 IC224030 IC224030 IC224030 IC224030 IC224030 IC224030 IA101590 HF458100 V2440200 V2440200 VV058400 HF457150 HF454100 HF454100 VV066100 VV066100 HF454100 HF454100 HF455150 HF456820 VV065400 VV065400 VV065100 VV065100 VV065500 VV065500 HF457100 HF457100 HF456120 HF456120 HF456330 HF456330 HF457100 HF456390 HF454100 HF457180 HF457180 VV312400 VV312400 HF458100 HF458100 HF458100 V2440200 V2440200 VV058400 HF457150 HF454100 HF454100 VV066100 VV066100 HF454100 HF454100 HF455150 HF456820

DESCRIPTION LED LED LED LED LED LED LED LED LED Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Carbon Resistor Metal Film Resistor Metal Film Resistor Flame Proof C. Resistor Carbon Resistor Carbon Resistor Carbon Resistor Metal Film Resistor Metal Film Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Metal Film Resistor Metal Film Resistor Carbon Resistor Carbon Resistor Carbon Resistor Metal Film Resistor Metal Film Resistor Flame Proof C. Resistor Carbon Resistor Carbon Resistor Carbon Resistor Metal Film Resistor Metal Film Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor

REMARKS LT331-41-C13 (YE) LT321-41-C13 (GR) LT321-41-C13 (GR) LT321-41-C13 (GR) LT321-41-C13 (GR) LT331-41-C13 (YE) LT321-41-C13 (GR) LT311G-41-C13(RE) LT311G-41-C13(RE) 2SC2240 GR,BL 2SC2240 GR,BL 2SC2240 GR,BL 2SC2240 GR,BL 2SC2240 GR,BL 2SC2240 GR,BL 2SC2240 GR,BL 2SC2240 GR,BL 2SC2240 GR,BL 2SC2240 GR,BL 2SC2240 GR,BL 2SC2240 GR,BL 2SA1015 O,Y 100.0K 1/4 J 2.4K 1/4 F 2.4K 1/4 F 390.0 1/4 J 15.0K 1/4 J 10.0 1/4 J 10.0 1/4 J 47K 1/4 F 47K 1/4 F 10.0 1/4 J 10.0 1/4 J 150.0 1/4 J 8.2K 1/4 J 8.2K 1/4 F 8.2K 1/4 F 2.2K 1/4 F 2.2K 1/4 F 10K 1/4 F 10K 1/4 F 10.0K 1/4 J 10.0K 1/4 J 1.2K 1/4 J 1.2K 1/4 J 3.3K 1/4 J 3.3K 1/4 J 10.0K 1/4 J 3.9K 1/4 J 10.0 1/4 J 18.0K 1/4 J 18.0K 1/4 J 3.9K 1/4 F 3.9K 1/4 F 100.0K 1/4 J 100.0K 1/4 J 100.0K 1/4 J 2.4K 1/4 F 2.4K 1/4 F 390.0 1/4 J 15.0K 1/4 J 10.0 1/4 J 10.0 1/4 J 47K 1/4 F 47K 1/4 F 10.0 1/4 J 10.0 1/4 J 150.0 1/4 J 8.2K 1/4 J MONITOR(-5) MONITOR(-10) D.EFFECT(VO.ECHO1,2, VO.REV1,2, HALL1,2, HALL,PLATE) D.EFFECT ON POWER LIMITER 1 LIMITER 2

QTY

RANK

01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01

: New Parts

RANK: Japan only

9

EMX660

REF NO.

R214 R215 R216 R217 R218 R219 R220 R221 R222 R223 R224 R225 R226 R227 R228 R229 -231 R232 R233 R234 R235 R301 R302 R303 R304 R305 R306 R307 R308 R309 R310 R311 R312 R313 R314 R315 R316 R317 R318 R319 R320 R321 R322 R323 R324 R325 R326 R327 R328 R329 -331 R332 R333 R334 R335 R401 R402 R403 R404 R405 R406 R407 R408 R409 R410 R411 R412 R413 R414 R415

PART NO. VV065400 VV065400 VV065100 VV065100 VV065500 VV065500 HF457100 HF457100 HF456120 HF456120 HF456330 HF456330 HF457100 HF456390 HF454100 HF457180 HF457180 VV312400 VV312400 HF458100 HF458100 HF458100 V2440200 V2440200 VV058400 HF457150 HF454100 HF454100 VV066100 VV066100 HF454100 HF454100 HF455150 HF456820 VV065400 VV065400 VV065100 VV065100 VV065500 VV065500 HF457100 HF457100 HF456120 HF456120 HF456330 HF456330 HF457100 HF456390 HF454100 HF457180 HF457180 VV312400 VV312400 HF458100 HF458100 HF458100 VV065300 VV065300 VV058400 HF457150 HF454100 HF454100 VV066100 VV066100 HF454100 HF454100 HF455150 HF456820 VV065400 VV065400

DESCRIPTION Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Metal Film Resistor Metal Film Resistor Carbon Resistor Carbon Resistor Carbon Resistor Metal Film Resistor Metal Film Resistor Flame Proof C. Resistor Carbon Resistor Carbon Resistor Carbon Resistor Metal Film Resistor Metal Film Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Metal Film Resistor Metal Film Resistor Carbon Resistor Carbon Resistor Carbon Resistor Metal Film Resistor Metal Film Resistor Flame Proof C. Resistor Carbon Resistor Carbon Resistor Carbon Resistor Metal Film Resistor Metal Film Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Metal Film Resistor Metal Film Resistor

REMARKS 8.2K 1/4 F 8.2K 1/4 F 2.2K 1/4 F 2.2K 1/4 F 10K 1/4 F 10K 1/4 F 10.0K 1/4 J 10.0K 1/4 J 1.2K 1/4 J 1.2K 1/4 J 3.3K 1/4 J 3.3K 1/4 J 10.0K 1/4 J 3.9K 1/4 J 10.0 1/4 J 18.0K 1/4 J 18.0K 1/4 J 3.9K 1/4 F 3.9K 1/4 F 100.0K 1/4 J 100.0K 1/4 J 100.0K 1/4 J 2.4K 1/4 F 2.4K 1/4 F 390.0 1/4 J 15.0K 1/4 J 10.0 1/4 J 10.0 1/4 J 47K 1/4 F 47K 1/4 F 10.0 1/4 J 10.0 1/4 J 150.0 1/4 J 8.2K 1/4 J 8.2K 1/4 F 8.2K 1/4 F 2.2K 1/4 F 2.2K 1/4 F 10K 1/4 F 10K 1/4 F 10.0K 1/4 J 10.0K 1/4 J 1.2K 1/4 J 1.2K 1/4 J 3.3K 1/4 J 3.3K 1/4 J 10.0K 1/4 J 3.9K 1/4 J 10.0 1/4 J 18.0K 1/4 J 18.0K 1/4 J 3.9K 1/4 F 3.9K 1/4 F 100.0K 1/4 J 100.0K 1/4 J 100.0K 1/4 J 6.8K 1/4 F 6.8K 1/4 F 390.0 1/4 J 15.0K 1/4 J 10.0 1/4 J 10.0 1/4 J 47K 1/4 F 47K 1/4 F 10.0 1/4 J 10.0 1/4 J 150.0 1/4 J 8.2K 1/4 J 8.2K 1/4 F 8.2K 1/4 F

QTY

RANK

01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 RANK: Japan only

: New Parts

10

EMX660

REF NO.

R416 R417 R418 R419 R420 R421 R422 R423 R424 R425 R426 R427 R428 R429 -431 R432 R433 R434 R435 R501 R502 R503 R504 R505 R506 R507 R508 R509 R510 R511 R512 R513 R514 R515 R516 R517 R518 R519 R520 R521 R522 R523 R524 R525 R526 R527 R528 R529 -533 R534 -536 R537 R538 R601 R602 R603 R604 R605 R606 R607 R608 R609 R610 R611 R612 R613 R614 R615 R616 R617

PART NO. VV065100 VV065100 VV065500 VV065500 HF457100 HF457100 HF456120 HF456120 HF456330 HF456330 HF457100 HF456390 HF454100 HF457180 HF457180 VV312400 VV312400 HF458100 HF458100 HF458100 V2440200 V2440200 VV058400 HF457150 HF454100 HF454100 VV066100 VV066100 HF454100 HF454100 HF455150 HF457180 VV065400 VV065400 VV065100 VV065100 VV065500 VV065500 HF457100 HF457100 HF456120 HF456120 HF456330 HF456330 HF457100 HF456390 HF454100 HF457180 HF457180 HF458100 HF458100 HF456470 HF457100 HF458100 V2440200 V2440200 VV058400 HF457150 HF454100 HF454100 VV066100 VV066100 HF454100 HF454100 HF455150 HF457180 VV065400 VV065400 VV065100 VV065100

DESCRIPTION Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Metal Film Resistor Metal Film Resistor Carbon Resistor Carbon Resistor Carbon Resistor Metal Film Resistor Metal Film Resistor Flame Proof C. Resistor Carbon Resistor Carbon Resistor Carbon Resistor Metal Film Resistor Metal Film Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Metal Film Resistor Metal Film Resistor Flame Proof C. Resistor Carbon Resistor Carbon Resistor Carbon Resistor Metal Film Resistor Metal Film Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor Metal Film Resistor

REMARKS 2.2K 1/4 F 2.2K 1/4 F 10K 1/4 F 10K 1/4 F 10.0K 1/4 J 10.0K 1/4 J 1.2K 1/4 J 1.2K 1/4 J 3.3K 1/4 J 3.3K 1/4 J 10.0K 1/4 J 3.9K 1/4 J 10.0 1/4 J 18.0K 1/4 J 18.0K 1/4 J 3.9K 1/4 F 3.9K 1/4 F 100.0K 1/4 J 100.0K 1/4 J 100.0K 1/4 J 2.4K 1/4 F 2.4K 1/4 F 390.0 1/4 J 15.0K 1/4 J 10.0 1/4 J 10.0 1/4 J 47K 1/4 F 47K 1/4 F 10.0 1/4 J 10.0 1/4 J 150.0 1/4 J 18.0K 1/4 J 8.2K 1/4 F 8.2K 1/4 F 2.2K 1/4 F 2.2K 1/4 F 10K 1/4 F 10K 1/4 F 10.0K 1/4 J 10.0K 1/4 J 1.2K 1/4 J 1.2K 1/4 J 3.3K 1/4 J 3.3K 1/4 J 10.0K 1/4 J 3.9K 1/4 J 10.0 1/4 J 18.0K 1/4 J 18.0K 1/4 J 100.0K 1/4 J 100.0K 1/4 J 4.7K 1/4 J 10.0K 1/4 J 100.0K 1/4 J 2.4K 1/4 F 2.4K 1/4 F 390.0 1/4 J 15.0K 1/4 J 10.0 1/4 J 10.0 1/4 J 47K 1/4 F 47K 1/4 F 10.0 1/4 J 10.0 1/4 J 150.0 1/4 J 18.0K 1/4 J 8.2K 1/4 F 8.2K 1/4 F 2.2K 1/4 F 2.2K 1/4 F

QTY

RANK

01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 RANK: Japan only

: New Parts

11

EMX660

REF NO.

R618 R619 R620 R621 R622 R623 R624 R625 R626 R627 R628 R629 -633 R636 R637 R638 R639 R640 R641 R642 R643 R644 R645 R646 R701 R702 R703 R704 R705 R706 R710 R711 R712 R713 R714 R716 R717 R718 R719 R720 R721 R724 R725 R726 R727 R728 R729 R730 R731 -733 R734 R735 R737 R738 R739 R741 R742 R812 R813 R814 R816 R817 R818 R819 R820 R821 R824 R825 R826 R827

PART NO. VV065500 VV065500 HF457100 HF457100 HF456120 HF456120 HF456330 HF456330 HF457100 HF456390 HF454100 HF457180 HF457180 HF458100 HF456470 HF457100 HF456100 HF456100 HF458470 HF458470 HF456470 HF456470 HF457470 HF457470 HF456820 HF456820 HF456150 HF456150 HF456120 HF456120 HF457180 HF457360 HF457360 HF458220 HF458100 HF458120 HF458120 HF457180 HF455220 HF456430 HF457100 HF456330 HF458100 HF456330 HF457100 HF456470 HF455750 HF457100 HF455680 HF455680 HF455560 HF455560 VV065500 VV065500 HF458100 HF456910 HF455100 HF457180 HF458220 HF458100 HF458120 HF458120 HF457180 HF455220 HF456430 HF457100 HF456330 HF458100 HF456330 HF457100

DESCRIPTION Metal Film Resistor Metal Film Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Metal Film Resistor Metal Film Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor Carbon Resistor

REMARKS 10K 1/4 F 10K 1/4 F 10.0K 1/4 J 10.0K 1/4 J 1.2K 1/4 J 1.2K 1/4 J 3.3K 1/4 J 3.3K 1/4 J 10.0K 1/4 J 3.9K 1/4 J 10.0 1/4 J 18.0K 1/4 J 18.0K 1/4 J 100.0K 1/4 J 4.7K 1/4 J 10.0K 1/4 J 1.0K 1/4 J 1.0K 1/4 J 470.0K 1/4 J 470.0K 1/4 J 4.7K 1/4 J 4.7K 1/4 J 47.0K 1/4 J 47.0K 1/4 J 8.2K 1/4 J 8.2K 1/4 J 1.5K 1/4 J 1.5K 1/4 J 1.2K 1/4 J 1.2K 1/4 J 18.0K 1/4 J 36.0K 1/4 J 36.0K 1/4 J 220.0K 1/4 J 100.0K 1/4 J 120.0K 1/4 J 120.0K 1/4 J 18.0K 1/4 J 220.0 1/4 J 4.3K 1/4 J 10.0K 1/4 J 3.3K 1/4 J 100.0K 1/4 J 3.3K 1/4 J 10.0K 1/4 J 4.7K 1/4 J 750.0 1/4 J 10.0K 1/4 J 680.0 1/4 J 680.0 1/4 J 560.0 1/4 J 560.0 1/4 J 10K 1/4 F 10K 1/4 F 100.0K 1/4 J 9.1K 1/4 J 100.0 1/4 J 18.0K 1/4 J 220.0K 1/4 J 100.0K 1/4 J 120.0K 1/4 J 120.0K 1/4 J 18.0K 1/4 J 220.0 1/4 J 4.3K 1/4 J 10.0K 1/4 J 3.3K 1/4 J 100.0K 1/4 J 3.3K 1/4 J 10.0K 1/4 J

QTY

RANK

01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 RANK: Japan only

: New Parts

12

EMX660

REF NO.

R828 R829 R830 R831 -833 R834 R835 R900 R901 R902 R903 R904 R905 R906 R907 R908 R909 R910 R911 R912 R913 R914 R915 R916 R917 -925 SW101 SW201 SW301 SW401 SW701 SW702 SW901 -909 * * * * * * * * * * * * * * * * * * * * * * * * * * VR101 -103 VR104 -106 VR201 -203 VR204 -206 VR301 -303 VR304 -306 VR401 -403 VR404 -406 VR501 -503 VR504 -506 VR601 -603 VR604 -606 VR701 -703 VR704 -710 VR802 VR803 VR804 -810 VR901 VR902

PART NO. HF456470 HF455750 HF457100 HF455680 HF455680 HF455560 HF455560 HF454100 HF458220 HF457220 HF457180 HF455220 HF457150 HF457100 HF458100 HF4555