Text preview for : Yamaha-RXE600 micro audio sys.pdf part of Yamaha RXE600 audio microsystem
Back to : Yamaha-RXE600 micro audio | Home
MICRO COMPONENT SYSTEM RDX-E600
RX-E600/ NX-E400
RX-E600/NX-E400
SERVICE MANUAL
SERVICE MANUAL
The RDX-E600 is composed of the RX-E600, NX-E400 and the DVD-E600.
This service manual is for the RX-E600 and the NX-E400.
For the DVD-E600 service manual, please refer to the following publication number:
DVD-E600 100924
DVD-E600 100924
IMPORTANT NOTICE
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are
already known and understood by the users, and have therefore not been restated.
WARNING: Failure to follow appropriate service and safety procedures when servicing this product may result in per-
sonal injury, destruction of expensive components, and failure of the product to perform as specified. For
these reasons, we advise all YAMAHA product owners that any service required should be performed by
an authorized YAMAHA Retailer or the appointed service representative.
IMPORTANT: The presentation or sale of this manual to any individual or firm does not constitute authorization, certifica-
tion or recognition of any applicable technical capabilities, or establish a principle-agent relationship of
any form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering,
and service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore,
inevitable and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to
exist, please contact the distributor's Service Division.
WARNING: Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this
buss).
IMPORTANT: Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to
the unit.
I CONTENTS
TO SERVICE PERSONNEL . . . . . . . . . . . . . . . . . . . . 2 IC DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12~14
FRONT PANELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BLOCK DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
REAR PANELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3~4 PRINTED CIRCUIT BOARD . . . . . . . . . . . . . . . . 16~19
REMOTE CONTROL PANELS . . . . . . . . . . . . . . . . . . 4 PIN CONNECTION DIAGRAM . . . . . . . . . . . . . . . . . 20
SPECIFICATIONS / . . . . . . . . . . . . . . . . . . 4~5 SCHEMATIC DIAGRAM . . . . . . . . . . . . . . . . . . . 21~22
INTERNAL VIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23~33
DISASSEMBLY PROCEDURES / . . . . . . . 6~7 REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . 34
TEST MODE / . . . . . . . . . . . . . . . . . . . 8~9 SYSTEM CONTROL . . . . . . . . . . . . . . . . . . . . . . 34~49
AMP ADJUSTMENTS / . . . . . . . . . . . . . . 10 NX-E400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
DISPLAY DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 PARTS LIST FOR CARBON RESISTORS . . . . . . . . 51
100923
P.O.Box 1, Hamamatsu, Japan
'04.09
RX-E600/NX-E400
AC LEAKAGE
I TO SERVICE PERSONNEL WALL EQUIPMENT TESTER OR
OUTLET UNDER TEST EQUIVALENT
1. Critical Components Information
Components having special characteristics are marked s
and must be replaced with parts having specifications equal
to those originally installed.
2. Leakage Current Measurement (For 120V Models Only)
When service has been completed, it is imperative to verify INSULATING
that all exposed conductive surfaces are properly insulated TABLE
from supply circuits.
RX-E600/NX-E400
G Meter impedance should be equivalent to 1500 ohm G Leakage current must not exceed 0.5mA.
shunted by 0.15µF. G Be sure to test for leakage with the AC plug in both polarities.
"CAUTION"
"F232: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE 3.15A,
125V FUSE."
CAUTION
F232: REPLACE WITH SAME TYPE 3.15A, 125V FUSE.
ATTENTION
F232: UTILISER UN FUSIBLE DE RECHANGE DE MEME TYPE DE 3.15A, 125V.
WARNING: CHEMICAL CONTENT NOTICE!
The solder used in the manufacturing process except soldering of the P.C.B. ass'y contains LEAD. In addition, other
electrical/electronic and /or plastic (where applicable) components may also contain traces of chemicals found by the
California Health and Welfare Agency (and possibly other entities) to cause cancer and/or birth defects or other reproductive
harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REA-
SON WHATSOEVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose
eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before
handling food.
About Lead Free Solder /
The P.C.B.s installed in this unit are soldered using the
following solder.
SIDE A / SIDE B /
MAIN P.C.B - Lead Free Solder /
OPERATION P.C.B - Lead Free Solder /
Side A SMT REFLOW Process
Solder Dip
Side B MI FLOW Process
Among some types of lead free solder currently available,
it is recommended to use one of the following types for
the repair work.
· Sn + Ag + Cu (tin + silver + copper)
· Sn + Cu (tin + copper)
· Sn + Zn + Bi (tin + zinc + bismuth)
1. As the melting point temperature of the lead free solder
is about 30°C to 40°C (50°F to 70°F) higher than that of
the lead solder, be sure to use a soldering iron suitable
to each solder.
2. If lead solder must be used, be sure to remove lead
free solder from each terminal section of the parts to
be replaced and from the area around it completely
before soldering, or make sure that the lead free solder
and lead solder melt together fully.
2
RX-E600/NX-E400
I FRONT PANELS
U, C, R, K, A, L, J models B, G, E models
RX-E600/NX-E400
I REAR PANELS
U, C models R model
K model A model
B model G, E models
3
RX-E600/NX-E400
L model
I SPECIFICATIONS /
RX-E600
I AUDIO SECTION /
Minimum RMS Output Power Per Channel /
20Hz to 20kHz, 0.1% THD, 6 ohms . . . . . . . . . . 40W + 40W
1kHz, 0.1% THD, 6 ohms . . . . . . . . . . . . . . . . . . 55W + 55W
Maximum Power Per Channel / (EIAJ)
1kHz, 10% THD, 6 ohms (R, J models) . . . . . . . 65W + 65W
RX-E600/NX-E400
Dynamic Power Per Channel / (IHF)
6 ohms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60W + 60W
4 ohms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75W + 75W
J model 2 ohms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100W + 100W
DIN Standard Output Power Per Channel /
1kHz, 0.7% THD, 4 ohms (G, E models) . . . . . . 60W + 60W
Dynamic Headroom / (6 ohms)
U, C, models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.76dB
IEC Power Per Channel /
1kHz, 0.1% THD, 6 ohms (G, E models) . . . . . . 55W + 55W
Power Band Width /
0.1% THD, 30W/6 ohms . . . . . . . . . . . . . . . . 10Hz to 50kHz
Damping Factor /
20Hz to 20kHz, 6 ohms . . . . . . . . . . . . . . . . . . . . 60 or more
Input Sensitivity/Impedance
DVD, etc . . . . . . . . . . . . . . . . . . . . . . . . . . 150mV/47k-ohms
Maximum Input Signal Level / (1kHz, 0.5% THD)
DVD, etc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0V
Output Level/Impedance
I REMOTE CONTROL PANELS REC OUT (MD, TAPE) . . . . . . . . . . . . . . . 150mV/1.2k-ohms
SUB WOOFER (50Hz) . . . . . . . . . . . . . . . . . 2.0V/680-ohms
U, C, R, K, A, L, J models B, G, E models Headphone Jack Rated Output/Impedance
DVD, etc 1kHz, 150mV, 8 ohms . . . . . . . . . 0.43V/330 ohms
Frequency Response / (20Hz to 20kHz)
DVD, etc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0±0.5dB
Total Harmonic Distortion / (20Hz to 20kHz)
DVD, etc to SP OUT (20W/6 ohms) . . . . . . . . . . . . . . 0.04%
Signal-to-Noise Ratio / (IHF-A-Network)
DVD, etc, Input Shorted (150mV) . . . . . . . . . . . . . . . . . 93dB
(250mV) . . . . . . . . . . . . . . . . . 98dB
Residual Noise / (IHF-A-Network)
SP OUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100µV
Channel Separation / (Vol. 30dB)
DVD, etc, Input 5.1k-ohms Shorted, 1kHz/10kHz 60dB/45dB
Tone Control Characteristics /
BASS : Boost/cut . . . . . . . . . . . . . . . . . . . . ±10dB (50Hz)
Turnover Frequency . . . . . . . . . . . . . . . . . 350Hz
TREBLE : Boost/cut . . . . . . . . . . . . . . . . . . . ±10dB (20kHz)
Turnover Frequency . . . . . . . . . . . . . . . . . 3.5kHz
Filter Characteristics /
SUB WOOFER (L.P.F.) . . . . . . . . . . . . . fc = 100Hz, 6dB/oct.
I AM SECTION /
Tuning Range /
U, C models . . . . . . . . . . . . . . . . . . . . . . . . . 530 to 1710kHz
R, L models . . . . . . . . . . . . . . . 530 to 1710/531 to 1611kHz
A, B, G, E, J models . . . . . . . . . . . . . . . . . . . 531 to 1611kHz
Usable Sensitivity / . . . . . . . . . . . . . . . . . . 300µV/m
Antenna / . . . . . . . . . . . . . . . . . . . Loop antenna
4
RX-E600/NX-E400
I FM SECTION / I SPEAKER SECTION / (NX-E400)
Tuning Range / Type / . . . . . . 2-way Bass Reflex Magnetic Shielding Type
U, C models . . . . . . . . . . . . . . . . . . . . . . . 87.5 to 107.9MHz Driver /
R, L models . . . . . . . . . . . 87.5 to 108.0/87.50 to 108.00MHz Woofer . . . . . . . . . . . . . . . . . . . . . . 13cm (5-1/8") Cone Type
K, A, B, G, E models . . . . . . . . . . . . . . 87.50 to 108.00MHz Tweeter . . . . . . . . . . . . . . . . . . . . . . . 2.5cm (1") Dome Type
J model . . . . . . . . . . . . . . . . . . . . . . . . . 76.00 to 108.00MHz Frequency Response / . . . . . . 55Hz to 28kHz
Usable Sensitivity / (75 ohms) Impedance / . . . . . . . . . . . . . . . . . . . . . 6 ohms
RX-E600/NX-E400
Mono (S/N 30dB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.0µV Nominal Input / . . . . . . . . . . . . . . . . . . . . . . . . . . 60W
Alternate Channel Selectivity / . . . . . . . . . . 70dB Maximum Input / . . . . . . . . . . . . . . . . . . . . . . . . 110W
Signal-to-Noise Ratio / Sensitivity / . . . . . . . . . . . . . . . 87dB/2.83V,1m
Mono/Stereo (IHF) . . . . . . . . . . . . . . . . . . . . . . . . . . . 76/70dB Crossover Frequency / . . . . . . . . 3kHz
Harmonic Distortion / Input Terminal / . . . . . . . . . . . . . Screw/Banana Type
Mono/Stereo (1kHz) . . . . . . . . . . . . . . . . . . . . . . . . 0.2/0.3% Dimensions / (W x H x D) . . . . . 186 x 300 x 223mm
Stereo Separation / (7-5/16" x 11-13/16" x 8-3/4")
1kHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45dB Weight / . . . . . . . . . . . . . . . . . . . . . . . . 4.3 kg (9 lbs. 7 oz)
Frequency Response / Finish / . . . . . . . . . . . . . . . . . . . High Gloss Piano Finish
20Hz to 15kHz . . . . . . . . . . . . . . . . . . . . . . . . . . . +0.5/-2.0dB Accessories / . . . . . . . . . . . . . Speaker Cable (4m) x 2
Antenna Input / . . . . . . . . . . 75 ohms unbalanced
* Specifications subject to change without notice.
I GENERAL /
Power Supply / G DIMENSIONS / (RX-E600)
U, C models . . . . . . . . . . . . . . . . . . . . . . . . AC 120V, 60Hz
(7/8")
R, L models . . . . . . . . . . . AC 110/120/220/240V, 50/60Hz
22
K model . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 220V, 60Hz
A model . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 240V, 50Hz
B, G, E models . . . . . . . . . . . . . . . . . . . . . . AC 230V, 50Hz
J model . . . . . . . . . . . . . . . . . . . . . . . . . AC 100V, 50/60Hz
Power Consumption /
U, C models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110W
R, K, A, B, G, E, L models . . . . . . . . . . . . . . . . . . . . . 125W
J model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85W
Standby Power Consumption /
335 (13-3/16")
372 (14-5/8")
U, C, J models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.7W
R, K, A, B, G, E, L models . . . . . . . . . . . . . . . . . . . . . 0.8W
Maximum Power Consumption
1kHz, 10% THD, 2ch, 6 ohms (R, L models) . . . . . . 255W
AC Outlets /
U, C, R, G, E, L, J models, Switched x 2
100W max (Total)
A, B models Switched x 1 . . . . . . . . . . . . . . . . . . . 100W max
Dimensions / (W x H x D) . . . . . . . . 217 x 108 x 372mm
(9/16")
(8-9/16" x 4-1/4" x 14-5/8")
15
Weight / . . . . . . . . . . . . . . . . . . . . . . 5.4 kg (11 lbs. 14 oz)
Finish /
100 (3-15/16")
Gold color . . . . . . . . . . . . . . . . . U, C, R, K, A, G, E models
108 (4-1/4")
Silver color . . . . . . . . . . . . . . . . . . U, R, B, G, E, L, J models
Accessories / (of RDX-E600) . . AM loop antenna x 1
Indoor FM antenna x 1
Remote Control x 1
(5/16")
217 (8-9/16")
Battery (size "UM-3", "R06") x 2
8
* Specifications subject to change without notice.
Unit : mm (inch)
U ....... USA model B ....... British model
C ....... Canadian model G ....... European model
R ....... General model E ....... South European model
K ....... Korean model L ....... Singapore model
A ....... Australian model J ....... Japanese model
5
RX-E600/NX-E400
I INTERNAL VIEW
1 2 3 4 5 1 POWER TRANSFORMER
2 MAIN (4) P.C.B.
3 OPERATION (2) P.C.B.
4 AM/FM TUNER
5 MAIN (2) P.C.B.
RX-E600/NX-E400
6 OPERATION (1) P.C.B.
7 MAIN (5) P.C.B.
8 MAIN (1) P.C.B.
9 MAIN (3) P.C.B.
6 7 8 9
I DISASSEMBLY PROCEDURES /
(Remove parts in disassembly order as numbered.)
1. Removal of Top Cover
a. Remove 4 screws (1) and 4 screws (2) in Fig. 1.
b. Lift the Top Cover at the rear and move it rearward
slantingly.
2. Removal of Front Panel
a. Disconnect 5 connectors (CB251, CB253, CB210,
CB407, CB700) in Fig. 2.
b. Remove 2 screws (3), 2 screws (4) and 1 push rivet
(5) in Fig. 1.
c. Release 2 hooks and remove the Front Panel Unit by
pulling it forward.
Top Cover
2
Front Panel Unit
1 2 MAIN (3) P.C.B.
OPERATION (1) P.C.B.
CB407
CB210
1
MAIN (2) P.C.B.
Hook CB253
3 OPERATION (2) P.C.B.
5
Hook CB251
3
4 MAIN (1) P.C.B.
Front Panel Unit CB700
Fig. 1 Fig. 2
6
RX-E600/NX-E400
G When checking the P.C.B.:
a. Remove the Top Cover and the Front Panel Unit.
b. Remove 6 screws (6) in Fig. 3.
c. Remove 5 screws (7) in Fig. 3.
d. Remove 3 screws (8) in Fig. 3.
e. Remove the Power Transformer and Main P.C.B. (with
the rear panel attached) from the main chassis.
RX-E600/NX-E400
f. With the rear panel attached, set the Main P.C.B on its
side. At this time, set the Power Transformer on its side
as well in Fig. 4.
g. Using a lead wire or the like, connect G250 of the Main
(1) P.C.B. with the rear panel in Fig. 4.
h. With the Front Panel Unit set on its side, connect 5
connectors (CB251, CB253, CB210, CB407, CB700) in
Fig. 5.
i. Connect the power cable, turn on the power and check
for operation.
7
7
6
6
6
Main Chassis / CB407
CB210
CB251
8
Fig. 3
CB700
G250
Lead Wire Front Panel Unit /
CB253
MAIN (1) P.C.B.
Fig. 5
Rear Panel
Power Transformer
Fig. 4
7
RX-E600/NX-E400
I TEST MODE /
POWER Off condition
STANDBY/ON Key is pushed while pushing DISPLAY Key and AUTO/MAN'L Key.
RX-E600/NX-E400
TEST MODE indication.
TEST MODE UP / TEST MODE DOWN / When present mode is carried out.
PRESET/TUNING B Key / PRESET/TUNING N Key /
PRESET/BAND Key /
Test mode number up. Test mode number down. Execute test mode.
TEST PROGRAM MODE FUNCTION DESCRIPTION /
Test mode is finished.
DISPLAY / FUNCTION / PRESET/BAND Key /
Indication for destinaion. (*1) STANDBY/ON Key /
01 DEST-B,G (*1)
All FL segments and BACKUP RAM CLEAR. 1st : all segments light /
02 FL+CLEAR (Note that memories set by the user will be
2nd : RAM CLEAR / POWER OFF /
erased.)
Also, the preset contents of the tuner
are restored to the factory preset ones. The completion of test mode.
All FL segments and circuit board short cir 1st : all segments light /
03 FL CHECK -cuit inspection.
2nd : Even-numbered segments and even
numbered digits are turned on. FL CHECK /
1st /
3rd : Odd -numbered segments and odd-
numbered digits are turned on. TIMER PRESET
EDIT
STEREO
TUNED
AUTO RDS PS PTY RT CT
MEMORY PTY HOLD
TIMER
SLEEP
VOLUME
2nd /
Version information of the microcomputer It is changed to the date indication.
04 Ver-1.00 software. (*2)
PRESET STEREO AUTO RDS PS PTY RT CT TIMER
The date of the microcomputer software. (*2) TIMER
EDIT TUNED MEMORY PTY HOLD SLEEP
VOLUME
It is changed to version indication.
*2
04'04.07.06
*2
3rd /
The calculation of SUM is done and indicated Re-calculation
05 SUM[Caa2] after that. (*2) TIMER PRESET
EDIT
STEREO
TUNED
AUTO RDS PS PTY RT CT
MEMORY PTY HOLD
TIMER
SLEEP
VOLUME
*2
(*1)
DESTINATION R, L (AM9k/FM50k) R, L (AM10k/FM100k) K, A B, G, E U, C J
Display R9k R10k A B, G U, C J
(*2) Contents of indication change by the microcomputer software.
8
RX-E600/NX-E400
G FACTORY PRESET
PRESET No.
BAND MARKETS
1 2 3 4 5 6 7 8
U, C, R, L (100k/10k) 98.1 95.1 87.5 101.5 107.9 88.1 106.1 107.9
FM (MHz)
R, K, A, B, G, E, L (50k/9k) 98.10 95.10 87.50 101.50 108.00 88.10 106.10 107.90
U, C, R, L (100k/10k) 630 1080 1400 530 1710 900 1350 1440
AM (kHz)
R, K, A, B, G, E, L (50k/9k) 630 1080 1404 531 1611 900 1350 1440
NOTE 1) PRESET PAGE ................................................. A : FM B : AM C : FM D : AM E : FM
RX-E600/NX-E400
G
FM (MHz) 83.0 82.1 76.0 84.0 86.0 90.0 78.0 88.0
AM (kHz) 630 1080 1404 531 1611 900 1350 1440
CAUTION : When executing Test mode No. 2 RAM CLEAR, be sure to write down the preset memory contents of the
tuner, using a table like the one shown below. Execution of RAM CLEAR will set the memory contents of the
tuner back to the factory preset state which means that all the memories preset by the user will be erased.
:
Preset group P1 P2 P3 P4 P5 P6 P7 P8
A
B
C
D
E
9
RX-E600/NX-E400
I AMP ADJUSTMENTS /
G Confirmation of Idling Current /
1) No signal applied. /
2) Non-loaded condition. /
3) Aging is not necessary. /
Item/ Test Point/ Rating/ (DC) Note/
R319 If the measured voltage exceeds 5mV, cut the lead wire of R308(L ch)
RX-E600/NX-E400
MAIN L (Between terminal / or R309(R ch) and then check again if each measured value satisfies the
) rating.
0.1mV--5mV
R320
MAIN R (Between terminal /
)
* Confirm that the idling current is 0.25mV -- 15mV after 60 minutes.
0.1mV ~ 5mV (DC)
R308 (L ch)
R309 (R ch)
Q261 MAIN (1) P.C.B. Cut OFF
R319 (L ch)
R320 (R ch)
R319
R308 Note)
· If the idling current exceeds 5mV after a power amplifier
R320 repair, check for a defective component before cutting the
resistor.
R309 · If R308(L ch) or R309(R ch) have already been cut off and
idling current does not flow, reconnect R308(1k-ohms) or
R309(1k-ohms).
· Q261 and Q262 are transistors for temperature correction.
Apply silicone grease to the contact surface with the heat
Q262 sink.
10
RX-E600/NX-E400
I DISPLAY DATA
G V700 : 16-BT-67GN (V3579300)
a 1
PATTERN AREA
RX-E600/NX-E400
G PIN CONNECTION
Pin No. 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
Connection F2 F2 NP NP 11G 10G 9G 8G 7G 6G 5G 4G 3G 2G 1G P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 P15 P16 P17 P18 P19 P20 P21 P22 NP NP F1 F1
Pin No. 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82
Connection F2 F2 NP NP 12G 13G 14G 15G 16G NX NX NX NX NX NX NX NX NX NX NX NX NX NX NX P35 P34 P33 P32 P31 P30 P29 P28 P27 P26 P25 P24 P23 NP NP F1 F1
Note : 1) F1, F2 ..... Filament 2) NP ..... No pin 3) NX ..... No extened Pin 4) 1G ~ 16G ..... Grid
G GRID ASSIGNMENT
15G 14G 13G 12G 11G 10G 9G 8G 7G 6G 5G 4G 3G 2G 1G
1-1 2-1 3-1 4-1 5-1 16G
1-2 2-2 3-2 4-2 5-2
1-3 2-3 3-3 4-3 5-3
1-4 2-4 3-4 4-4 5-4
1-5 2-5 3-5 4-5 5-5
(16G)
1-6 2-6 3-6 4-6 5-6
1-7 2-7 3-7 4-7 5-7
(15G~1G)
G ANODE CONNECTION
16G 15G 1G 16G 15G 1G 16G 15G 1G
P1 1-1 P13 3-3 P25 B9 5-5
P2 2-1 P14 4-3 P26 B10 1-6
P3 3-1 P15 5-3 P27 B11 2-6
P4 4-1 P16 1-4
P28 3-6
P5 5-1 P17 B1 2-4 P29 4-6
P6 1-2 P18 B2 3-4 P30 5-6
P7 2-2 P19 B3 4-4 P31 1-7
P8 3-2 P20 B4 5-4 P32 2-7
P9 4-2 P21 B5 1-5 P33 3-7
P10 5-2 P22 B6 2-5 P34 4-7
P11 1-3 P23 B7 3-5 P35 5-7
P12 2-3 P24 B8 4-5
11
RX-E600/NX-E400
I IC DATA
IC700 : M30218FCFP (16 bit µ-COM)
P52/FLD10
P54/FLD12
P55/FLD13
P56/FLD14
P57/FLD15
P00/FLD16
P01/FLD17
P02/FLD18
P03/FLD19
P04/FLD20
P05/FLD21
P06/FLD22
P17/FLD23
P10/FLD24
P12/FLD26
P13/FLD27
P14/FLD28
P15/FLD29
P16/FLD30
P17/FLD31
P20/FLD32
P21/FLD33
P22/FLD34
P23/FLD35
P53/FLD11
P11/FLD25
P50/FLD8
P51/FLD9
VCC
VSS
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
RX-E600/NX-E400
P67/FLD7 81 50 P24/FLD36
P66/FLD6 82 49 P25/FLD37
P65/FLD5 83 48 P26/FLD38
P64/FLD4 84 47 P27/FLD39
P63/FLD3 85 46 P30/FLD40
P62/FLD2 86 45 P31/FLD41
P61/FLD1 87 44 P32/FLD42
P60/FLD0 88 43 P33/FLD43
VEE 89 42 P34/FLD44
P107/AN7 90 41 P35/FLD45
P106/AN6 91 40 P36/FLD46
P105/AN5 92 39 P37/FLD47
P104/AN4 93 38 P40/FLD48
P103/AN3 94 37 P41/FLD49
P102/AN2 95 36 P42/FLD50
P101/AN1 96 35 P43/FLD51
AVSS 97 34 P44/TXD0/FLD52
P100/AN0 98 33 P45/RXD0/FLD53
VREF 99 32 P46/CLK0/FLD54
AVCC 100 31 P47/CTS0/RTS0/FLD55
10
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
11
1
2
3
4
5
6
7
8
9
P97/DA0/CLKOUT/DIMOUT
P96/DA1/SCLK22
P95/SCLK21