Text preview for : DAEWOO CP185L CP185G CHASSIS TV SM.pdf part of DAEWOO Service Manual



Back to : DAEWOO CP185L CP185G CHAS | Home

S/M No. : TCP185LGF0

Color Television
CHASSIS : CP-185L and CP-185G

Specification
Version TV Standard Sound system Power consumption Speaker Teletext system Aerial Input Channel coverage Tuning system Visual screen size Channel indication Program selection Pal multi system PAL-SECAM B/G, D/K, H, I/I (NTSC : AV Only) Mono * 1 Speaker 14":49W / 20":60W / 21" 68W * 2Speaker 14":57W / 20":64W / 21":74W 3W 8 Ohm o 7.5W 8 Ohm Option 75 Ohm unbalanced off-air channels, S-cable channels and hyperband Ferquency synthesiser tuning system 14":34cm 20':48cm 21":51cm On screen display 100 Programmes RCA jack : Audio input and Vidio input ERUO SCART Jack : Audio/Video and R/G/B input. Sloe and fast swtching, SVHsin Audio - Video jack on front of cabinet in common connection with EURO-SCART Headphone jack on front of cabinet R-40A10 (None teletext) AAA Battery type R-40A01(With teletext) AAA Battery type R-44C05(With teletext) AA Battery type

Auxiliary Outpup Terminal

Remote control

http :

e.co.kr

Jul. 2003

TABLE OF CONTENTS
SAFETY INSTRUCTION SPECIFICATIONS
21 Pin EURO-SCART 2 3 3 4 5 5 5 5~6 7 8~10 11 12~24 25~27

CIRCUIT BLOCK DIAGRAM ALIGNMENT INSTRUCTIONS
1. Service mode 2. Microcontroller configuration 3. TV SET Alignment

SCHEMATIC DIAGRAM EXPLODED VIEW PRINTED CIRCUIT BOARD SERVICE PARTS LIST
The different parts list

APPENDIX (Appendix is provide only by internet [http://svc.dwe.co.kr])
FUNCTIONAL DESCRIPTION IC DESCRIPTION
1~6 7~42

1

SAFETY INSTRUCTION
WARNING : Only competent service personnel may carry out work involving the testing or repair of this equipment

X-RAY RADIATION PRECAUTION
1. Excessive high voltage can produce potentially hazardous X-RAY RADIATION. To avoid such hazards, the high voltage must not exceed the specified limit. The nominal value of the high voltage of this receiver is 22-23 kV (14")or 24-26 kV (20"-21")at max beam current. The high voltage must not, under any circumstances, exceed 27.5 kV (14", 20"), 29KV (21"). Each time a receiver requires servicing, the high voltage should be checked. It is important to use an accurate and reliable high voltage meter.). 2. The only source of X-RAY Radiation in this TV receiver is the picture tube. For continued X-RAY RADIATION protection, the replacement tube must be exactly the same type tube as specified in the parts list.

SAFETY PRECAUTION
1. Potentials of high voltage are present when this receiver is operating. Operation of the receiver outside the cabinet or with the back cover removed involves a shock hazard from the receiver. 1) Servicing should not be attempted by anyone who is not thoroughly familiar with the precautions necessary when working on high voltage equipment. 2) Discharge the high potential of the picture tube before handling the tube. The picture tube is highly evacuated and if broken, glass fragments will be violently expelled. 2. If any Fuse in this TV receiver is blown, replace it with the FUSE specified in the Replacement Parts List. 3. When replacing a high wattage resistor (oxide metal film resistor) in circuit board, keep the resistor body 10 mm away from the circuit board. 4. Keep wires away from high voltage or high temperature components. 5. This receiver must operate under AC 230 volts, 5O Hz. NEVER connect to a DC supply of any other voltage or frequency.

PRODUCT SAFETY NOTICE
Many electrical and mechanical parts in this equipment have special safety-related characteristics. These characteristics are often passed unnoticed by a visual inspection and the X-RAY RADIATION protection afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage, etc. Replacement parts which have these spe- cial safety characteristics are identified in this manual and its supplements, electrical components having such features are identified by designated symbol on the parts list. Before replacing any of these components, read the parts list in this manual carefully. The use of substitutes replacement parts which do not have the same safety characteristics as specified in the parts list may create X-RAY Radiation.

2

SPECIFICATIONS
21Pin EURO-SCART
PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 SIGNAL DESCRIPTION Audio Output Right Audio Input Right Audio Output Left Audio Earth Blue Earth Audio Input Left Blue Input Slow Switching Green Earth N.C Green Input N.C Red Earth Blanking Earth Red Input Chroma Input Fast Switching Video Out Earth Video In Earth Video Output Video Input Common Earth 1 Vpp 1 Vpp 3dB, Impedance 75 3dB, Impedance 75 0.7Vpp 0.1V, Impedance 75 3dB for a luminance signal of 1 Vpp 0 to 0.4V : Logic :"0", 1 to 3V : Logic "1", Impedance 75 0.7Vpp + 0.1V, Impedance 75 0.5Vrms, Impedance > 10k 0.7Vpp + 0.1V, Inpedance 75 TV : 0 to 2V, AV : 4.5 to 12V, Impedance > 10k MATCHING VALUE 0.5 Vrms, Impedance < 1k, (RF 54% Mod) 0.5Vrms, Impedance > 10k 0.5 Vrms, Impedance < 1k, (RF 54% Mod)

3

CIRCUIT BLOCK DIAGRAM

4

ALIGNMENT INSTRUCTIONS
Microcontroller configuration : Service mode
To switch the TV set into service mode please see instruction below. 1 - Select pr. number 91 2 - Adjust sharpness to minimum and exit all menu. 3 - Quickly press the key sequence : RED - GREEN - menu To exit SERVICE menu press menu key or Std By key. In Service Mode press "OK" to the microcontroller i.e. the I2C bus is free and the set can be controlled by external equipment. Press "OK" again to allow the microcontroller to control the set again

Microcontroller configuration :
Tuner Option Option DW PHI PH2 Tuner maker DAEWOO / SAMSUNG LIPS (tuner internal AGC ) PHILIPS ( Video processor AGC )

TV set Alignment
1 - G2 alignment - Set TV in NORMAL I mode - TV in AV mode without video signal ? Black screen. - TV preset with WP Red, WP Green and WP Blue equal to 32. - TV preset with Black R, Black G equal to 8. - Adjust screen volume ( on FBT ) such that the highest cathode cut-off voltage measured on CRT board, is Vcutoff 5V Screen size 14" 20" & 21" Vcut-off 115V 125V

2 - White balance - Select a dark picture and adjust Black G and Black R to the desired colour temperature. - Select a bright picture and adjust WP Red, WP Green, WP Blue to the desired colour temperature.

5

ALIGNMENT INSTRUCTIONS

3 - Focus - Adjust the Focus volume ( on FBT ) to have the best resolution on screen. 4 - Vertical geometry - Adjust the Vertical Amplitude, Shift, S-Correction and Slope to compensate for vertical distortion

5 - Horizontal picture centering - Adjust H Shift to have the picture in the center of the screen. 7 - AGC - Adjust the antenna signal level to 68dB V 2 for Daewoo tuner (63dB V 1 for Philips tuner) - Set RF AGC to 0. - Increase RF AGC level and stop when the level on pin 6 of I501 goes below 2.5 Vdc

6

7

EXPLODED VIEW
1. 14V3

8

EXPLODED VIEW

2. 20V3

9

EXPLODED VIEW

3. 21V3

10

11

ELECTRICAL PARTS LIST
Caution In this Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need the

latest parts information, please refer to PPL(Prats Price List) in Service information Center (http://svc.dwe.co.kr)
Caution is a recommendable part for stock.
is safety component, so it must be used the same component.

LOC ZZ100 ZZ110 00100 00200 M821 ZZ120 M211 M541 M781 ZZ130 10 M801 M811 M821 ZZ131 ZZ132 ZZ140 M201A M201B M201C M211A M211B M211D M591 M591A M681 SP01A SP02A V901 ZRT10 ZZ200 M191 M191A M201 M231 M251 M252 M531 M531A M561 ZZ210

PART CODE 48B3740A01 PTACPWD434 4850Q00910 48586002E2 4858213801 PTBCSHD753 4852156721 4855415800 4857817610 PTPKCPD753 6520010100 4858057500 4858194100 4858211801 48519A5310 58G0000147 PTCACAD753 4856013300 4856215402 4856013302 7172401412 4855930901 7172401412 4855933901 7172401212 4856812001 7172401212 7172401212 PSRTPWD002 4859637160 PTFMSJD753 4854946301 7178301011 4852074601 4851114411 4852540801 4852540701 4855313201 7178300811 4855617500 PTSPPWD753

PART NAME TRANSMITTER REMOCON ACCESSORY AS BATTERY MANUAL INSTRUCTION BAG INSTRUCTION COVER BACK AS COVER BACK SPEC PLATE CLOTH BLACK PACKING AS STAPLE PIN BOX CARTON PAD BAG P.E CRT GROUND NET COIL DEGAUSSING CABINET AS SCREW CRT FIXING WASHER RUBBER SCREW CRT FIXING SCREW TAPPTITE DECO TERM SCREW TAPPTITE DECO WOOFER SCREW TAPPTITE TIE CABLE SCREW TAPPTITE SCREW TAPPTITE CRT AS CRT MASK FRONT AS BUTTON SCREW TAPPTITE MASK FRONT PANEL CONTROL ASSY GRILL R GRILL L DECO COVER SCREW TAPPTITE MARK BRAND SPEAKER AS

DESCRIPTION R-40A01 DTA-20V1MZ R03/NN ENGLISH,ARABIC L.D.P.E T0.05X250X400 DTB-21D4T HIPS(CORE A2,B1) 150ART P/E FILM (C/TV) FELT 300X20X0.7 DTB-21D4T AUTO W65 DW-3 EPS L.D.P.E T0.03X1300X1100 2101S-1015-1P DC-21SF DTB-21D4T 30X80 BK CR T2.0 30X190 BK TT2 TRS 4X14 MFZN BK PVC CL T0.2 TT2 TRS 4X14 MFZN BK HIPS GY TT2 TRS 4X12 MFZNBK NYLON66 DA100 TT2 TRS 4X12 MFZNBK TT2 TRS 4X12 MFZNBK A51EHW135X01(PHILIPS) A51EHW135X01 DTB-21D4T ABS BK TT2 WAS 3X10 MFZN HIPS BK 2326711+4857101+6717900 EGI T0.8 EGI T0.8 HIPS GY TT2 WAS 3X8 MFZN CU AU+ABS BK DTB-21D4T

REMARK R

!

R

!

12

ELECTRICAL PARTS LIST

LOC P602A SP01 SP02 ZZ290 10 30 40 C404 C408 C801 C804 C808 C824 D707 D807 I301 00001 0000A 0000B I501 I601 I602 I702 I703 I801 00001 0000A 0000B I802 I805 I901 00001 0000A 0000B JPA01 JPA02 L401 LF801 M682 P401 P501 P801 A000 Q401 00001

PART CODE 4850704S31 4858310810 4858310810 PTMPMSD753 2193102005 2291050616 2291050301 CMYH3C822J CMYE2D624J CL1UC3474M CEYN2W151P CH1BFE222M CH1HFE102M 4858900002 DRGP30J PTD2SW7100 1LA78041 4857027100 7174300811 1DW3613EB6 1TDA7267A1TDA7267A1AT24C08PC 1TS0P1238W PTM2SW4600 1STRW67534857024600 7174300811 1LTV817C 1KA7805 PTC3SW1100 1TDA6107Q4857031100 7174300811 4859200401 4859109950 58H0000020 5PLF24A1 4856812001 4859240120 4850708N08 4859903110 4859903511 PTJ2SW7200 TST1803DH-

PART NAME CONNECTOR SPEAKER SPEAKER PCB MAIN MANUAL AS SOLDER BAR FLUX SOLDER FLUX SOLVENT C MYLAR C MYLAR C LINE ACROSS C ELECTRO C CERA AC C CERA AC HOLDER LED ASSY DIODE HEAT SINK ASS`Y IC VERTICAL HEAT SINK SCREW TAPPTITE IC MICOM IC AMP IC AMP IC IC PREAMP HEAT SINK ASS`Y IC POWER HEAT SINK SCREW TAPPTITE IC PHOTO COUPLER IC REGULATOR HEAT SINK ASS`Y IC VIDEO AMP HEAT SINK SCREW TAPPTITE SOCKET RGB JACK PIN BOARD COIL H-LINEARITY FILTER LINE TIE CABLE CONN WAFER CONNECTOR CORD POWER AS CORD POWER HEAT SINK ASS`Y TR HORI

DESCRIPTION YH025-04+YRT205+ULW800400 SP-58126F01 SP-58126F01 DTB-21D4T SN:PB=63:47 S63S-1320 JS-64T3 IM-1000 1.6KV BUP 8200PF J 200V PU 0.62MF J 0.47MF 1J(UCVSNDF/SV)+Q/O 450V LHS 150MF (25X40) U/C/V AC400V 2200PF 4.0KV 1000PF E DG LH-3P RGP30J 1LA78041 + 7174300811 LA78041 SPCC T1.0+SN TT2 RND 3X8 MFZN DW9361/N2/3-EB6 TDA7267A TDA7267A AT24C08-10PC TS0P1238WI1 1STRW6753- + 7174300811 STR-W6753 AL EX B/K TT2 RND 3X8 MFZN LTV-817C KA7805 1TDA6107Q- + 7174300811 TDA6107Q A1050P-H24 T2.0 TT2 RND 3X8 MFZN YRS21-R1 PH-JB-9710A L-76(76.5UH) LF-24A1 NYLON66 DA100 YFW500-06 BIC-08T-25T+C-20T+ULW=400 KKP-419J-H03VVH2+H0U=2200 CW4232 H03VVH2-F=2250 TST1803DH- + 7174301011 ST1803DHI

REMARK R R

R R R ! !

R R R R

R

R

R

!

R

13

ELECTRICAL PARTS LIST

LOC 0000A 0000B R801 R802 SCT1 SF01 SW801 T401 T402 T801 U100 ZZ200 C305 C315 C415 C600 C805 C810 C811 C813 C814 C817 C818 C820 C903 F802 ZZ200 10 E001 E002 E003 E004 E005 E006 E007 E008 E009 E010 E011 E012 E013 E014 E015 E016 E017

PART CODE 4857027200 7174301011 DDC7R0M290 RX07B339JP 4859303530 5PK2960M 5S40101143 50D10A3 50H0000256 50M3541B64859721530 PTMPJ0D753 CEXF1E471V CEXF1E471V CEXF2E100V CEXF1E102V CBXB3D471K CEXF2C101V CEXF2C101V CEXF1C222V CEXF1E102V CEXF1C471V CEXF1C471V CEXF1C101V CCXB3D102K 5FWML4022L PTMPJBD753 2TM18006BE 4856310300 4856310300 4856310300 4856310300 4856310300 4856310300 4856310300 4856310300 4856310300 4856310300 4856310300 4856310300 4856310300 4856310300 4856310300 4856310300 4856310300

PART NAME HEAT SINK SCREW TAPPTITE POSISTOR R CEMENT SOCKET CRT FILTER SAW SW POWER PUSH TRANS DRIVE FBT TRANS SMPS TUNER VARACTOR PCB MAIN (RHU) AS C ELECTRO C ELECTRO C ELECTRO C ELECTRO C CERA SEMI C ELECTRO C ELECTRO C ELECTRO C ELECTRO C ELECTRO C ELECTRO C ELECTRO C CERA FUSE PCB MAIN M-10 AS TAPE MASKING EYE LET EYE LET EYE LET EYE LET EYE LET EYE LET EYE LET EYE LET EYE LET EYE LET EYE LET EYE LET EYE LET EYE LET EYE LET EYE LET EYE LET

DESCRIPTION AL T1.0 TT2 RND 3X10 MFZN ECPCD7R0M290 7W 3.3 OHM J BEN 15MM 4P PCS629-03C K2960M PS3-22SP (P.C.B) TD-10A3 FFA69023M TSM-3541B6 DT5-BF18D N DTB-21D4T 25V RSS 470MF (10X16) TP 25V RSS 470MF (10X16) TP 250V RSS 10MF (10X20) TP 25V RSS 1000MF (13X20) TP 2KV BL(N) 470PF K (T) 160V RSS 100MF (16X25) TP 160V RSS 100MF (16X25) TP 16V RSS 2200MF (16X31.5) TP 25V RSS 1000MF (13X20) TP 16V RSS 470MF (8X12)TP 16V RSS 470MF (8X12)TP 16V RSS 100MF (6.3X11) TP 2KV B 1000PF K (TAPPING) WIDE TL 250V 4A CASE DTB-21D4T 6.2X500 BSR T0.2 (R1.6) BSR T0.2 (R1.6) BSR T0.2 (R1.6) BSR T0.2 (R1.6) BSR T0.2 (R1.6) BSR T0.2 (R1.6) BSR T0.2 (R1.6) BSR T0.2 (R1.6) BSR T0.2 (R1.6) BSR T0.2 (R1.6) BSR T0.2 (R1.6) BSR T0.2 (R1.6) BSR T0.2 (R1.6) BSR T0.2 (R1.6) BSR T0.2 (R1.6) BSR T0.2 (R1.6) BSR T0.2 (R1.6)

REMARK

R R

! !

R R

! !

R

!

14

ELECTRICAL PARTS LIST

LOC E018 E019 E020 E100 E101 E104 E105 E106 E107 E108 E109 N001 N002 N003 N004 P602 R304 R306 R402 R415 R804 R821 R822 R824 R835 ZZ200 C102 C106 C121 C320 C355 C412 C414 C417 C418 C420 C423 C502 C504 C509 C511 C512 C514 C517 C519

PART CODE 4856310300 4856310300 4856310300 4856310600 4856310600 4856310600 4856310600 4856310600 4856310600 4856310600 4856310600 4857417500 4857417500 4857417500 4857417500 485923172S RS01Z109JRS01Z109JRS01Z249JRS02Z102JS RS02Z278JS RS02Z100JS RS02Z151JS RS02Z101JS RS02Z151JS PTMPJRD753 CEXF1E470V CEXF1H100V CEXF1H100V CEXF1H101V CMXM2A104J CEXF2C229V CMXM2A104J CXSL2H470J CMXM2A104J CCXB1H102K CCXB2H561K CEXF1E470V CMXM2A332J CEXF1E470V CMXL1J104J CMXL1J104J CEXF1E101V CEXF1H109V CEXF1H109V

PART NAME EYE LET EYE LET EYE LET EYE LET EYE LET EYE LET EYE LET EYE LET EYE LET EYE LET EYE LET TERM PIN TERM PIN TERM PIN TERM PIN CONN WAFER R M-OXIDE FILM R M-OXIDE FILM R M-OXIDE FILM R M-OXIDE FILM R M-OXIDE FILM R M-OXIDE FILM R M-OXIDE FILM R M-OXIDE FILM R M-OXIDE FILM PCB MAIN RADIAL AS C ELECTRO C ELECTRO C ELECTRO C ELECTRO C MYLAR C ELECTRO C MYLAR C CERA C MYLAR C CERA C CERA C ELECTRO C MYLAR C ELECTRO C MYLAR C MYLAR C ELECTRO C ELECTRO C ELECTRO

DESCRIPTION BSR T0.2 (R1.6) BSR T0.2 (R1.6) BSR T0.2 (R1.6) BSR T0.2 (R2.3) BSR T0.2 (R2.3) BSR T0.2 (R2.3) BSR T0.2 (R2.3) BSR T0.2 (R2.3) BSR T0.2 (R2.3) BSR T0.2 (R2.3) BSR T0.2 (R2.3) DA-IB0214(D2.3/DY PIN) DA-IB0214(D2.3/DY PIN) DA-IB0214(D2.3/DY PIN) DA-IB0214(D2.3/DY PIN) YW025-04 (STICK) 1W 1 OHM J (TAPPING) 1W 1 OHM J (TAPPING) 1W 2.4 OHM J (TAPPING) 2W 1K OHM J SMALL 2W 0.27 OHM J SMALL 2W 10 OHM J SMALL 2W 150 0HM J SMALL 2W 100 OHM J SMALL 2W 150 0HM J SMALL DTB-21D4T 25V RSS 47MF (5X11) TP 50V RSS 10MF (5X11) TP 50V RSS 10MF (5X11) TP 50V RSS 100MF (8X11.5) TP 100V 0.1MF J (TP) 160V RSS 2.2MF (8X11.5)TP 100V 0.1MF J (TP) 500V SL 47PF J (TAPPING) 100V 0.1MF J (TP) 50V B 1000PF K (TAPPING) 500V B 560PF K (TAPPING) 25V RSS 47MF (5X11) TP 100V 3300PF J (TP) 25V RSS 47MF (5X11) TP 63V MEU 0.1MF J 63V MEU 0.1MF J 25V RSS 100MF (6.3X11) TP 50V RSS 1MF (5X11) TP 50V RSS 1MF (5X11) TP

REMARK

15

ELECTRICAL PARTS LIST

LOC C522 C523 C524 C525 C526 C528 C530 C532 C551 C555 C564 C570 C593 C599 C601 C602 C603 C604 C605 C650 C770 C802 C803 C806 C809 C812 C815 C816 C819 C822 C832 C833 C834 C835 C901 C902 CA04 CA10 G901 G902 G903 G904 I803 L802 Q101

PART CODE CEXF1H479V CCXF1H103Z CMXM2A104J CCXB1H102K CMXM2A104J CEXF1E101V CEXF1E101V CEXF1H100V CEXF1C101V CEXF1E470V CEXF1E101V CCXB1H472K CEXF1E101V CEXF1H229V CEXF1H108V CCXF1H103Z CEXF1C101V CEXF1H108V CEXF1C101V CEXF1E470V CEXF1H100V CCXF3A472Z CCXF3A472Z CCXB1H821K CCXB3A271K CEXF2A100V CMXL2E104K CEXF1E101V CEXF1E470V CMXM2A104J CEXF1H100V CMXM2A473J CEXF1H109V CCXB2H471K CMXL2E104K CCXB1H561K CEXD1H229F CCXF1H103Z 4SG0DX0001 4SG0DX0001 4SG0DX0001 4SG0DX0001 1KA431L 58CX430599 TKTC3198Y-

PART NAME C ELECTRO C CERA C MYLAR C CERA C MYLAR C ELECTRO C ELECTRO C ELECTRO C ELECTRO C ELECTRO C ELECTRO C CERA C ELECTRO C ELECTRO C ELECTRO C CERA C ELECTRO C ELECTRO C ELECTRO C ELECTRO C ELECTRO C CERA C CERA C CERA C CERA C ELECTRO C MYLAR C ELECTRO C ELECTRO C MYLAR C ELECTRO C MYLAR C ELECTRO C CERA C MYLAR C CERA C ELECTRO C CERA SPARK GAP SPARK GAP SPARK GAP SPARK GAP IC COIL CHOKE TR

DESCRIPTION 50V RSS 4.7MF (5X11) TP 50V F 0.01MF Z (TAPPING) 100V 0.1MF J (TP) 50V B 1000PF K (TAPPING) 100V 0.1MF J (TP) 25V RSS 100MF (6.3X11) TP 25V RSS 100MF (6.3X11) TP 50V RSS 10MF (5X11) TP 16V RSS 100MF (6.3X11) TP 25V RSS 47MF (5X11) TP 25V RSS 100MF (6.3X11) TP 50V B 4700PF K (TAPPING) 25V RSS 100MF (6.3X11) TP 50V RSS 2.2MF (5X11) TP 50V RSS 0.1MF (5X11) TP 50V F 0.01MF Z (TAPPING) 16V RSS 100MF (6.3X11) TP 50V RSS 0.1MF (5X11) TP 16V RSS 100MF (6.3X11) TP 25V RSS 47MF (5X11) TP 50V RSS 10MF (5X11) TP 1KV F 4700PF Z (T) 1KV F 4700PF Z (T) 50V B 820PF K (TAPPING) 1KV B 270PF K (TAPPING) 100V RSS 10MF (6.3X11) TP 250V MEU 0.1MF K 25V RSS 100MF (6.3X11) TP 25V RSS 47MF (5X11) TP 100V 0.1MF J (TP) 50V RSS 10MF (5X11) TP 100V 0.047MF J (TP) 50V RSS 1MF (5X11) TP 500V B 470PF K (TAPPING) 250V MEU 0.1MF K 50V B 560PF K (TAPPING) 50V RND 2.2MF (5X11) TP 50V F 0.01MF Z (TAPPING) SSG-102-A1(1.0KV) TAP SSG-102-A1(1.0KV) TAP SSG-102-A1(1.0KV) TAP SSG-102-A1(1.0KV) TAP KA431L AZ-9004Y 940K TP KTC3198Y

REMARK

16

ELECTRICAL PARTS LIST

LOC Q402 Q403 Q501 Q502 Q503 Q520 Q531 Q805 Q807 Q808 Q809 Q810 Q811 Q812 Q851 Q852 R907 SW701 SW702 SW703 SW704 SW705 SW706 X502 Z501 Z502 Z503 ZZ200 10 20 A001 C353 C403 C501 C515 C516 C518 C520 C521 C527 C531 C533 C534 C535 C536

PART CODE TKTC3207 TKTC3198YTKTA1266YTKTC3198YTKTC3198YTKTC3198YTKTA1266YTKTC3205YTKTA1281YTKTC3198YTKTC3198YTKTC3198YTKTA1266YTKTC3198YTKTC3198YTKTC3198YRN01B102JS 5S50101090 5S50101090 5S50101090 5S50101090 5S50101090 5S50101090 5XEX12R00E 5PXXT5R5MB 5PXXT6R5MB 5PXXT6R0MB PTMPJAD753 2TM14006LB 2TM10006LB 4859807793 CZCH1H100J CBZF1H104Z CCZF1H103Z CBZR1C222M CBZR1C472M CBZF1H104Z CCZB1H221K CCZB1H221K CCZF1H473Z CCZF1H473Z CCZB1H102K CCZF1H223Z CCZF1H223Z CCZF1H223Z

PART NAME TR TR TR TR TR TR TR TR TR TR TR TR TR TR TR TR R METAL FILM SW TACT SW TACT SW TACT SW TACT SW TACT SW TACT CRYSTAL QUARTZ FILTER CERA FILTER CERA FILTER CERA PCB MAIN AXIAL AS TAPE MASKING TAPE MASKING PCB MAIN C CERA C CERA SEMI C CERA C CERA C CERA C CERA SEMI C CERA C CERA C CERA C CERA C CERA C CERA C CERA C CERA

DESCRIPTION KTC3207 (TP) KTC3198Y KTA1266Y (TP) KTC3198Y KTC3198Y KTC3198Y KTA1266Y (TP) KTC3205Y (TP) KTA1281Y KTC3198Y KTC3198Y KTC3198Y KTA1266Y (TP) KTC3198Y KTC3198Y KTC3198Y 1W 1K OHM J SMALL THVH472GCA THVH472GCA THVH472GCA THVH472GCA THVH472GCA THVH472GCA HC-49/U 12.000MHZ 30PPM TP XT 5.5MB-TP XT 6.5MB-TP XT 6.0MB-TP DTB-21D4T 3M #232 6.0X2000M 3M #232-MAP-C 6.2X2000M 246X330 50V CH 10PF J 50V F 0.1MF Z 50V F 0.01MF Z 16V Y5R 2200PF M (AXIAL) 16V Y5R 4700PF M (AXIAL) 50V F 0.1MF Z 50V B 220PF K (AXIAL) 50V B 220PF K (AXIAL) 50V F 0.047MF Z 50V F 0.047MF Z 50V B 1000PF K (AXIAL) 50V F 0.022MF Z 50V F 0.022MF Z 50V F 0.022MF Z

REMARK

17

ELECTRICAL PARTS LIST

LOC C571 C585 C590 C591 C606 CA01 CA02 CA03 CA05 CA06 CA07 CA08 D101 D120 D313 D405 D407 D408 D450 D520 D521 D531 D532 D533 D534 D701 D702 D710 D711 D801 D802 D803 D804 D805 D806 D808 D809 D810 D812 D813 D814 D815 D817 D820 DA02

PART CODE CCZB1H821K CBZR1C222M CZCH1H270J CZCH1H270J CBZF1H104Z CCZB1H101K CCZB1H101K CCZB1H101K CCZB1H102K CCZB1H102K CCZB1H102K CCZB1H102K D1N4148 DUZ33B D1N4004S D1N4937G D1N4937G D1N4937G D1N4937G D1N4148 D1N4148 D1N4148 D1N4148 D1N4148 D1N4148 DUZ5R6BM DUZ5R6BM DUZ5R1B DUZ5R6BM DLT2A05G DLT2A05G DLT2A05G DLT2A05G D1N4937G DUZ5R6BM D1N4937G DRGP15J D1N4937G DUZ8R2BM D1N4148 D1N4937G D1N4937G DUZ6R2BM DUZ2R7B DUZ5R6BM

PART NAME C CERA C CERA C CERA C CERA C CERA SEMI C CERA C CERA C CERA C CERA C CERA C CERA C CERA DIODE DIODE ZENER DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE DIODE ZENER DIODE ZENER DIODE ZENER DIODE ZENER DIODE DIODE DIODE DIODE DIODE DIODE ZENER DIODE DIODE DIODE DIODE ZENER DIODE DIODE DIODE DIODE ZENER DIODE ZENER DIODE ZENER

DESCRIPTION 50V B 820PF K AXIAL 16V Y5R 2200PF M (AXIAL) CH 50V 27PF J AXL 52MM CH 50V 27PF J AXL 52MM 50V F 0.1MF Z 50V B 100PF K (AXIAL) 50V B 100PF K (AXIAL) 50V B 100PF K (AXIAL) 50V B 1000PF K (AXIAL) 50V B 1000PF K (AXIAL) 50V B 1000PF K (AXIAL) 50V B 1000PF K (AXIAL) 1N4148 (TAPPING) UZ-33B 1N4004S 1N4937G (TAPPING) 1N4937G (TAPPING) 1N4937G (TAPPING) 1N4937G (TAPPING) 1N4148 (TAPPING) 1N4148 (TAPPING) 1N4148 (TAPPING) 1N4148 (TAPPING) 1N4148 (TAPPING) 1N4148 (TAPPING) UZ-5.6BM UZ-5.6BM UZ-5.1B UZ-5.6BM LT2A05G (TP) LT2A05G (TP) LT2A05G (TP) LT2A05G (TP) 1N4937G (TAPPING) UZ-5.6BM 1N4937G (TAPPING) RGP15J 1N4937G (TAPPING) UZ-8.2BM 1N4148 (TAPPING) 1N4937G (TAPPING) 1N4937G (TAPPING) UZ-6.2BM UZ-2.7B UZ-5.6BM

REMARK

18

ELECTRICAL PARTS LIST

LOC DA03 DA04 DA05 DA06 DA08 DA09 DA10 DA11 DA13 DA27 J001 J002 J003 J004 J005 J006 J008 J010 J012 J013 J014 J016 J017 J018 J019 J020 J021 J022 J023 J024 J026 J027 J028 J029 J030 J034 J035 J036 J037 J038 J040 J041 J042 J043 J044

PART CODE DUZ5R1B CCZB1H271K DUZ5R6BM DUZ5R6BM DUZ5R6BM DUZ5R6BM DUZ5R6BM DUZ5R6BM CCZB1H271K DUZ5R6BM 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY

PART NAME DIODE ZENER C CERA DIODE ZENER DIODE ZENER DIODE ZENER DIODE ZENER DIODE ZENER DIODE ZENER C CERA DIODE ZENER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER

DESCRIPTION UZ-5.1B 50V B 270PF K UZ-5.6BM UZ-5.6BM UZ-5.6BM UZ-5.6BM UZ-5.6BM UZ-5.6BM 50V B 270PF K UZ-5.6BM AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING

REMARK

19

ELECTRICAL PARTS LIST

LOC J045 J050 J052 J053 J054 J055 J056 J057 J059 J060 J061 J062 J065 J067 J068 J069 J070 J071 J072 J073 J074 J075 J076 J077 J078 J079 J080 J081 J082 J083 J084 J085 J086 J087 J088 J089 J090 J092 J094 J095 J096 J097 J098 J099 J100

PART CODE 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY

PART NAME WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER

DESCRIPTION AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING

REMARK

20

ELECTRICAL PARTS LIST

LOC J101 J102 J103 J104 J105 J106 J107 J108 J109 J110 J111 J116 J117 J118 L101 L303 L500 L501 L502 L510 L511 L601 L602 L603 L604 L605 L801 L901 R101 R102 R103 R104 R105 R106 R107 R121 R302 R303 R305 R310 R311 R351 R352 R401 R404

PART CODE 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 85801065GY 5CPZ569K02 5MC0000100 5CPZ829K02 85801065GY 5CPZ100K02 5CPZ100K02 5CPZ100K02 5MC0000100 5CPZ109M04 5CPZ109M04 5CPZ109M04 5CPZ109M04 5MC0000100 5MC0000100 RD-AZ473JRD-AZ472JRD-AZ123JRD-AZ104JRD-AZ392JRD-AZ101JRD-AZ101JRD-2Z332JRD-2Z129JRD-AZ152JRD-2Z331JRD-AZ102JRD-AZ102JRN-4Z1501F RD-AZ471JRD-4Z472JRD-2Z751J-

PART NAME WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER WIRE COPPER COIL PEAKING COIL BEAD COIL PEAKING WIRE COPPER COIL PEAKING COIL PEAKING COIL PEAKING COIL BEAD COIL PEAKING COIL PEAKING COIL PEAKING COIL PEAKING COIL BEAD COIL BEAD R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R METAL FILM R CARBON FILM R CARBON FILM R CARBON FILM

DESCRIPTION AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING 5.6UH K (AXIAL 3.5MM) HC-3550 8.2UH K (AXIAL 3.5MM) AWG22 1/0.65 TIN COATING 10UH K (AXIAL 3.5MM) 10UH K (AXIAL 3.5MM) 10UH K (AXIAL 3.5MM) HC-3550 1UH 10.5MM M (LAL04TB) 1UH 10.5MM M (LAL04TB) 1UH 10.5MM M (LAL04TB) 1UH 10.5MM M (LAL04TB) HC-3550 HC-3550 1/6 47K OHM J 1/6 4.7K OHM J 1/6 12K OHM J 1/6 100K OHM J 1/6 3.9K OHM J 1/6 100 OHM J 1/6 100 OHM J 1/2 3.3K OHM J 1/2 1.2 OHM J 1/6 1.5K OHM J 1/2 330 OHM J 1/6 1K OHM J 1/6 1K OHM J 1/4 1.50K OHM F 1/6 470 OHM J 1/4 4.7K OHM J 1/2 750 OHM J

REMARK

21

ELECTRICAL PARTS LIST

LOC R405 R420 R430 R431 R450 R505 R506 R507 R508 R509 R512 R513 R514 R515 R516 R517 R518 R520 R521 R522 R523 R524 R525 R526 R527 R528 R530 R531 R533 R534 R535 R537 R538 R539 R549 R550 R551 R555 R556 R560 R561 R567 R571 R572 R573

PART CODE RD-AZ102JRD-AZ102JRD-4Z223JRD-4Z303JRD-2Z103JRD-AZ101JRD-AZ332JRD-AZ101JRD-AZ332JRD-AZ681JRD-AZ101JRD-AZ101JRD-AZ101JRD-AZ153JRD-AZ393JRD-AZ102JRD-AZ273JRD-AZ183JRD-AZ391JRD-AZ221JRD-AZ331JRD-AZ561JRD-AZ104JRD-4Z479JRD-AZ431JRD-AZ221JRD-AZ470JRD-AZ102JRD-AZ103JRD-AZ102JRD-AZ101JRD-AZ101JRD-AZ101JRD-AZ101JRD-AZ101JRD-AZ101J85801065GY RD-AZ103JRD-AZ562JRD-4Z102JRD-AZ221JRD-AZ101JRD-AZ432JRD-AZ122JRD-AZ272J-

PART NAME R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM WIRE COPPER R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM

DESCRIPTION 1/6 1K OHM J 1/6 1K OHM J 1/4 22K OHM J 1/4 30K OHM J 1/2 10K OHM J 1/6 100 OHM J 1/6 3.3K OHM J 1/6 100 OHM J 1/6 3.3K OHM J 1/6 680 OHM J 1/6 100 OHM J 1/6 100 OHM J 1/6 100 OHM J 1/6 15K OHM J 1/6 39K OHM J 1/6 1K OHM J 1/6 27K OHM J 1/6 18K OHM J 1/6 390 OHM J 1/6 220 OHM J 1/6 330 OHM J 1/6 560 OHM J 1/6 100K OHM J 1/4 4.7 OHM J 1/6 430 OHM J 1/6 220 OHM J 1/6 47 OHM J 1/6 1K OHM J 1/6 10K OHM J 1/6 1K OHM J 1/6 100 OHM J 1/6 100 OHM J 1/6 100 OHM J 1/6 100 OHM J 1/6 100 OHM J 1/6 100 OHM J AWG22 1/0.65 TIN COATING 1/6 10K OHM J 1/6 5.6K OHM J 1/4 1K OHM J 1/6 220 OHM J 1/6 100 OHM J 1/6 4.3K OHM J 1/6 1.2K OHM J 1/6 2.7K OHM J

REMARK

22

ELECTRICAL PARTS LIST

LOC R575 R580 R585 R586 R587 R595 R596 R597 R598 R601 R602 R603 R607 R610 R710 R711 R712 R713 R720 R721 R722 R723 R724 R725 R803 R805 R806 R807 R808 R809 R810 R811 R813 R814 R815 R816 R817 R818 R823 R825 R826 R827 R828 R829 R830

PART CODE RD-AZ511JRD-AZ561JRD-4Z224JRD-AZ221JRD-AZ221J85801065GY RD-AZ122JRD-AZ153JRD-AZ153JRD-AZ822JRD-AZ152JRD-4Z100JRD-AZ470JRD-AZ162JRD-AZ431JRD-AZ431J5MC0000100 RD-AZ100JRD-AZ122JRD-AZ181JRD-AZ221JRD-AZ331JRD-AZ471JRD-AZ222JRD-4Z104JRD-4Z225JRD-4Z152JRD-4Z221JRD-4Z102JRD-AZ473JRD-4Z479JRD-AZ152JRC-2Z565KP RD-AZ221JRD-AZ682JRD-AZ103JRD-AZ103JRD-AZ473JRD-AZ561JRD-AZ222JRD-AZ751JRD-AZ473JRD-AZ103JRD-AZ471JRD-AZ221J-

PART NAME R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM WIRE COPPER R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM COIL BEAD R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON COMP R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM

DESCRIPTION 1/6 510 OHM J 1/6 560 OHM J 1/4 220K OHM J 1/6 220 OHM J 1/6 220 OHM J AWG22 1/0.65 TIN COATING 1/6 1.2K OHM J 1/6 15K OHM J 1/6 15K OHM J 1/6 8.2K OHM J 1/6 1.5K OHM J 1/4 10 OHM J 1/6 47 OHM J 1/6 1.6K OHM J 1/6 430 OHM J 1/6 430 OHM J HC-3550 1/6 10 OHM J 1/6 1.2K OHM J 1/6 180 OHM J 1/6 220 OHM J 1/6 330 OHM J 1/6 470 OHM J 1/6 2.2K OHM J 1/4 100K OHM J 1/4 2.2M OHM J 1/4 1.5K OHM J 1/4 220 OHM J 1/4 1K OHM J 1/6 47K OHM J 1/4 4.7 OHM J 1/6 1.5K OHM J 1/2 5.6M OHM K 1/6 220 OHM J 1/6 6.8K OHM J 1/6 10K OHM J 1/6 10K OHM J 1/6 47K OHM J 1/6 560 OHM J 1/6 2.2K OHM J 1/6 750 OHM J 1/6 47K OHM J 1/6 10K OHM J 1/6 470 OHM J 1/6 220 OHM J

REMARK

23

R831 LOC R832 R833 R834 R840 R841 R842 R843 R901 R902 R903 R904 R905 R906 R954 RA01 RA02 RA03 RA04 RA06 RA07 RA08 RA09 RA10 RA11 RA12 RA16 RA19 RA20 RA30 RA44

RD-AZ473JPART CODE RD-AZ561J85801065GY RD-AZ561JRN-4Z6801F RN-4Z1003F RN-4Z2201F RD-AZ333JRD-AZ102JRD-AZ102JRD-AZ102JRD-2Z152JRD-2Z152JRD-2Z152JRD-AZ103JRD-AZ680JRD-AZ101JRD-AZ101JRD-AZ101JRD-AZ750JRD-AZ390JRD-AZ750JRD-AZ750JRD-AZ101JRD-AZ101JRD-AZ101JRD-AZ680JRD-AZ750JRD-AZ473JRD-AZ512JRD-AZ682J-

R CARBON FILM NAME PART R CARBON FILM WIRE COPPER R CARBON FILM R METAL FILM R METAL FILM R METAL FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM R CARBON FILM

1/6 47K OHM J DESCRIPTION 1/6 560 OHM J AWG22 1/0.65 TIN COATING 1/6 560 OHM J 1/4 6.8K OHM F 1/4 100K OHM F 1/4 2.20K OHM F 1/6 33K OHM J 1/6 1K OHM J 1/6 1K OHM J 1/6 1K OHM J 1/2 1.5K OHM J 1/2 1.5K OHM J 1/2 1.5K OHM J 1/6 10K OHM J 1/6 68 OHM J 1/6 100 OHM J 1/6 100 OHM J 1/6 100 OHM J 1/6 75 OHM J 1/6 39 OHM J 1/6 75 OHM J 1/6 75 OHM J 1/6 100 OHM J 1/6 100 OHM J 1/6 100 OHM J 1/6 68 OHM J 1/6 75 OHM J 1/6 47K OHM J 1/6 5.1K OHM J 1/6 6.8K OHM J

REMARK

24

APPENDIX FUNCTIONAL DESCRIPTION
FUNCTIONAL DESCRIPTION OF VIDEO PROCESSOR Vision IF amplifier
The vision IF amplifier can demodulate signals with positive and negative modulation. The PLL demodulator is completely alignment-free. The VCO of the PLL circuit is internal and the frequency is fixed to the required value by using the clock frequency of the -Controller/Teletext decoder as a reference. The setting of the various frequencies is made by the controlling software in subaddress 27H (33.9 MHz for system L-and 38.9 MHz for all other systems) Because of the internal VCO, the IF circuit has a high immunity to EMC interference.

For CP-185L/G

1. IF demodulator and audio amplifier
The FM demodulator is realised as a narrow band PLL with external loop filter, which provides the necessary selectivity without using an extra band pass filter. To obtain good selectivity a linear phase detector and a constant input signal amplitude are required. For this reason the intercarrier signal is internally supplied to the demodulator via a gain controlled amplifier and AGC circuit. The nominal frequency of the demodulator is set via a gain controlled amplifier and AGC circuit. The nominal frequency of the demodulator is tuned to the required frequency (5.5 / 6.0 / 6.5 MHz) by means of a calibration circuit which uses the clock frequency of the microcontroller as a reference. Selection of the required frequency is done by the controlling software.

Video switches
The video switch has one input for an external CVBS or Y/C signal. The selected CVBS signal can be supplied to pin 38, the IF video output. The selection between both signals is realised by the controlling software in subaddress 22H. The video ident circuit is connected to the selected signal. This ident circuit is independent of the synchronisation.

Synchronisation circuit
The IC contains separator circuits for the horizontal and vertical sync pulses and a data-slicing circuit which extracts the digital teletext data from the analogue signal. The horizontal drive signal is obtained from an internal VCO which is running at a frequency of 25 MHz. This oscillator is stabilised to this frequency by using a 12 MHz signal coming from the reference oscillator of the -Controller/Teletext decoder. The horizontal drive is switched on and off via the soft start/stop procedure. This function is realised by means of variation of the TON of the horizontal drive pulses.

1

FUNCTIONAL DESCRIPTION

APPENDIX

The vertical synchronisation is realised by means of a divider circuit. The vertical ramp generator needs an external resistor and capacitor. For the vertical drive a differential output current is available. The outputs are DC coupled to the vertical output stage. The following geometry parameters can be adjusted: „ Horizontal shift „ Vertical amplitude „ Vertical slope „ S-correction „ Vertical shift

Chroma and luminance processing
The chroma band-pass and trap circuits (including the SECAM cloche filter) are realised by means of gyrators and are tuned to the right frequency by comparing the tuning frequency with the reference frequency of the colour decoder. The luminance delay line and the delay cells for the peaking circuit are also realised with gyrators. The circuit contains a black stretcher functi on which corrects the black level for incoming signals which have a difference between the black level and the blanking level.

Colour decoder
The ICs can decode PAL, NTSC and SECAM signals. The PAL/NTSC decoder does not need external reference crystals but has an internal clock generator which is stabilised to the required frequency by using the 12 MHz clock signal from the referenc oscillator of the -Controller/Teletext decoder. The Automatic Colour Limiting (ACL) circuit (switchable via the ACL bit in subaddress 2OH) prevents oversaturation occurring when signals with a high chroma-to-burst ratio are received. The ACL circuit is designed such that it only reduces the chroma signal and not the burst signal. This has the advantage that the colour sensitivity is not affected by this function.

SOFTWARE CONTROL
The CPU communicates with the peripheral functions using Special function Registers (SFRS) which are addressed as RAM locations. The registers for the Teletext decoder appear as normal SFRs in the -Controller memory map and are written to these functions by using a serial bus. This bus is controlled by dedicated hardware which uses a simple handshake system for software synchronisation. For compatibility reasons and possible re-use of software blocks, the TV processor is controlled by I2C bus. The TV processor control registers cannot be read. Only the status registers can be read ( Read address 8A ). The SECAM decoder contains an auto-calibrating PLL demodulator which has two references, via the divided 12 MHz reference frequency (obtained from the -Controller) which is used to tune the PLL to the desired free-running frequency and the bandgap reference to obtain the correct absolute value of the output signal. The VCO of the PLL is calibrated during each vertical blanking period, when the IC is in search or SECAM mode. The base-band delay line (TDA 4665 function) is integrated. This delay line is also active during NTSC reception, to obtain a good suppression of cross colour effects. The demodulated colour difference signals are internally supplied to the delay line.

2

FUNCTIONAL DESCRIPTION
RGB output circuit and black-current stabilization

APPENDIX

In the RGB control circuit the signal is controlled on contrast, brightness and saturation. The ICs have a linear input for external RGB signals. The signals for OSD and text are internally supplied to the control circuit. The output signal has an amplitude of about 2 Volts black-to-white at nominal input signals and nominal settings of the various controls. To obtain an accurate biasing of the picture tube the 'Continuous Cathode Calibration' system has been included in these ICs. A black level off set can be made with respect to the level which is generated by the black current stabilisation system. In this way different colour temperatures can be obtained for the bright and the dark part of the picture. The black current stabilisation system checks the output level of the 3 channels and indicates whether the black level of the highest output is in a certain window or below or above this window. This indication is read from the status byte 01 and is used for automatic adjustment of the Vg2d voltage during the production of the TV receiver. During switch-off of the TV receiver a fixed beam current is generated by the black current control circuit. This current ensures that the picture tube capacitance is discharged. During the switch-off period the vertical deflection is placed in an overscan position so that the discharge is not visible on the screen.

2. IF
The TDA9361/TDA9381 has an alignment free IF PLL demodulator. The fully integrated oscillator is automatically calibrated, using the 12 MHz crystal as a frequency reference. The IF frequency is simply set in TV-Processor by I2C bus. The AFC information is available via I2C bus from the TV-Processor status bytes. The controlling software uses this information for tuner frequency tracking ( automatic following ). The AFC window is typically 125Khz wide. The minimum frequency step of the tuner is 62.5 kHz. This AFC function is disabled when a program is tuned using the direct frequency entry or after fine tuning adjustment. Therefore it is recommended to tune a channel with the TV search function ( manual or ATSS ) or by using the direct channel entry to enable the Automatic Frequency Control.

3

FUNCTIONAL DESCRIPTION

APPENDIX

For SECAM L and L' the TDA9361/TDA9381 is switched to positive modulation via I2C bus. SECAM L' transmission only occur in VHF band I and have their picture and sound carrier interchanged, compared to SECAM L and PAL B/G channels. For SECAM'L the picture carrier is situated at 33.9 MHz and the AM sound carrier at 40.40 MHz. The IF PLL reference is tuned from 38.9 to 33.9 MHz, this is done via I2C Bus and the SIF filter is switched from channel 2 to channel 1;this is done by pin 4 of TDA 9361. The tuner AGC time constant is slower for positive than for negative modulation, because the TDA9361 reduces its AGC current. To make the AGC time constant even slower an extra series resistor R103 is added. To prevent IF overload when jumping from a very strong transmitter to a weak transmitter a diode D101 has been added The SAW filter ( SF1 ) has a double Nyquist slope at 38.9 MHz and 33.9 MHz needed for this multistandard application. The disadvantage of this choice is that a 5.5 MHz trap filter ( Z501 ) is needed to suppress the residual sound carrier in the video for B/G signals.

3. Source switching
Video : The TDA9361/TDA9381 has only one external video input. The SCART video in pin (#20) is connected to the front RCA video input. The controlling software via I2C bus selects the signal source : - Video signal from tuner ( Pin 40 ). - External video. - External SVHS from SCART. The sound source switching is done in the video processor part and in the AM demodulator by the -Controller via I2C bus. The video processor pin 28 has multiple functions and provides in this applicationbus. - Deemphasis time constant - Audio monitor output - External AM input - Deemphasis time constant : The time constant is given by the capacitor C504,needer to obtain the 54 s time time constant for standarad PAL signal. - Audio monitor output : the nominal output signal is 500 mVrms, for all standards. The signal is also internally connected through to the audio switch. This signal is not controlled by the volume setting and can be used for SCART audio output. The signal is buffered to avoid influencing the deemphasis time constant and to adjust the output level. - External AM input : By software the deemphasis pin can be converted into an input pin. External AM signal for SECAM L/L' is directly connected to this pin. In this configuration the FM sound is internally muted, DC level remains at 3Vdc. An external sound signal of 500mVrms is applied to pin 35 via a coupling capacitor. The input impedance of this pin is 25k typical. Switching between internal FM, external AM or external audio from SCART is controlled internally by software.

4

FUNCTIONAL DESCRIPTION

APPENDIX

Fast R, G, B insertion : The external R, G, B insertion needs a fast switching and cannot be controlled by the software (instruction cycle of 1 sec). The fast switching pin 16 of SCART is directly connected to the TV processor pin 45 ( Fast blanking input ). The display is synchronised with the selected video source, i.e. to get stable R, G, B signal insertion they must be synchronised with the selected video source.

4. ”-Controller I/O pin configuration and function
The I/O pins of the -Controller can be configured in many ways. All port functions can be individually programmed by the controlling software. Each I/O port pin can be individually programmed in these configurations :

Open drain
In this mode, the port can function as input and output. It requires an external pull-up resistor. The maximum allowable supply voltage for this pull up resistor is +5V. So in this mode it is possible to interface a 5 Volt environment like I2C while the -Controller has a 3.3 Volt supply.

Push-Pull
The push pull mode can be used for output only. Both sinking and sourcing is active, which leads to steep slopes. The levels are 0 and Vddp, the supply voltage 3.3Volts.

High impedance
This mode can be used for input only operation of the port.

Special port for LED
Pin 10 and 11 have the same functionality as the general I/O pins but in addition, their current source and sink capacity is 8 mA instead of 4 mA. These pins are used for driving LED's via a series current limiting resistor.

”-Controller I/O pin configuration and function table
pin 1 2 3 4 5 6 7 8 10 11 62 name n.u. SCL SDA SECAM L' OCP RF AGC in Key in S/SW Red LED Green LED Audio mute configuration Stand by High impedance Open Drain Open Drain High impedance High impedance High impedance High impedance High impedance High impedance Open Drain Push Pull TV on High impedance Open Drain Open Drain Push Pull / High impedance High impedance High impedance High impedance High impedance Open Drain High impedance High impedance not used Serial clock line Serial data line SIF filter switching + AM/FM switching Over Current Protection (Switch the set OFF if the voltage on this pin is <2.3V ) Used during ATSS to measure 7RF signal level. Local keyboard input external video switch description

5

FUNCTIONAL DESCRIPTION
5. SECAM L/L' sound switching circuit.

APPENDIX

The microcontroller pin 4 is a three levels output. The voltage and configuration of this port is described below : Sound mode FM AM L AM L' Port configuration Push Pull Push Pull High Impedance Voltage Internally shorted to ground Pull up to 3.3V Fixed by R511, R156, R157

In FM mode the microcontroller is internally grounded to pin 4. The TDA9830 output is muted

6. Sound amplification
The device TDA7267A is a mono audio amplifier in powerDIP package specially designed for TV application. Thanks to the fully complementary output configuration the device delivers a rail to rail voltage swing without need of bootstrap capacitors. No external heat sink is needed as the Cu ground plane of the PCB is used as heat dissipation.

7. Vertical deflection
The vertical driver circuit is a bridge configuration. The deflection coil is connected between the output amplifiers, which are driven in phase opposition. The differential input circuit is voltage driven. The input circuit is especially intended for direc connection to driver circuits which deliver symmetrical current signals, but is also suitable for asymmetrical currents. The output current of these devices is converted to voltages at the input pins via resistors R350 and R351. The differential input voltage is compared with the output current through the deflection coils measured as voltage across R302, which provides internal feed-back information. The voltage across R302 is proportional to the output current. Flyback voltage The flyback voltage is determined by an additional supply voltage Vfb. The principle of operation with two supply voltages (class G) makes it possible to fix the supply voltage Vp optimum for the scan voltage and the second supply voltage Vfb optimum for the flyback voltage. Using this method, very high efficiency is achieved. The supply voltage Vfb is almost totally available as fly-back voltage across the coil, this being possible due to the absence of a coupling capacitor. Protection The output circuit has protection circuits for : - Too high die temperature - overvoltage of output stage A Guard circuit The guard signal is not used by the TDA9361/ TDA9381 to blank the screen in case of a fault condition. Damping resistor For HF loop stability a damping resistor (R305) is connected across the deflection coil.

6

IC DESCRIPTION

APPENDIX

1. TDA9361 : TV signal processor - Teletext decoder with embedded ”-Controller. TDA9381 : TV signal processor - with embedded ”-Controller.

TV-signal Processor
„ Multi-standard vision IF circuit with alignment-free PLL demodulator „ Internal (switchable) time-constant for the IF-AGC circuit „Mono intercarrier with a selective FM-PLL demodulator which can be switched to the different FM sound frequencies (5.5 / 6.0 / 6.5 MHz) „ Source selection between 'Internal' CVBS and external CVBS or Y/C signals „ Integrated chrominance trap circuit „ Integrated luminance delay line with adjustable delay time „ Asymmetrical'delay line type' peaking in the luminance channel „ Black stretching for non-standard luminance signals „ lntegrated chroma band-pass filter with switchable centre frequency „ Only one reference (12 MHz) crystal required for the -Controller, Teletext and the colour decoder „ PAL / NTSC or multistandard colour decoder with automatic search system „ Internal base-band delay line „RGB control circuit with 'Continuous Cathode Calibration', white point and black level off set adjustment so that the colour temperature of the dark and the bright parts of the screen can be chosen independently. „Linear RGB or YUV input with fast blanking for external RGB/YUV sources. The Text/OSD signals are internally supplied from the -Controller/Teletext decode „Contrast reduction possibility during mixed-mode of OSD and Text signals „Horizontal synchronisation with two control loops and alignment-free horizontal oscillator „Vertical count-down circuit „Vertical driver optimised for DC-coupled vertical output stages „Horizontal and vertical geometry processing

”-Controller
„ 80C51 -controller core standard instruction set and timing „ 1 s machine cycle „ 64Kx8-bit programmed ROM „ 3 - 12Kx8-bit Auxiliary RAM (shared with Display and Acquisition) „ Interrupt controller for individual enable/disable with two level priority „ Two 16-bit Timer/Counter registers „ watchdog timer „ Auxiliary RAM page pointer „16-bit Data pointer „ IDLE and Power Down (PD) mode „ 8-bit A/D converter „ 4 pins which can be programmed as general I/0 pin or ADC input.

7

IC DESCRIPTION
Data Capture

APPENDIX

„ Text memory 10 pages „Inventory of transmitted Teletext pages stored in the Transmitted Page Table (TPT) and Subtitle Page Table (SPT) „Data Capture for 525/625 line WST, VPS (PDC system A) and Wide Screen Signalling (WSS) bit decoding Automatic selection between 525 WST/625 WST „ Automatic selection between 625 WST/VPS on line 16 of VBI „ Real-time capture and decoding for WST Teletext in Hardware, to enable optimised -processor throughput „ Automatic detection of FASTEXT transmission „ Real-time packet 26 engine in Hardware for processing accented, G2 and G3 characters „ Signal quality detector for video and WST/VPS data types „ Comprehensive teletext language coverage „ Full Field and Vertical Blanking lnterval (VBI) data capture of WST data

Display
„ Teletext and Enhanced OSD modes „ Features of lever 1.5 WST. „ Serial and Parallel Display Attributes „ Single/Double/Quadruple Width and Height for characters „ Scrolling of display region „ Variable flash rate controlled by software „ Enhanced display features including overlining, underlining and italics „ Soft colours using CLUT with 4096 colour palette „ Globally selectable scan lines per row (9/10/13/16) and character matrix [12x10, 12xl3, 12x16 (VxH)] „ Fringing (Shadow) selectable from N-S-E-W direction „ Fringe colour selectable „ Meshing of defined area „ Contrast reduction of defined area „ Cursor „ Special Graphics Characters with two planes, allowing four colours per character „ 32 software redefinable On-Screen display characters „ 4 WST Character sets (GO/G2) in single device (e.g. Latin, Cyrillic, Greek, Arabic) „ G1 Mosaic graphics, Limited G3 Line drawing characters „ WST Character sets and Closed Caption Character set in single device

Data Capture
The Data Capture section takes in the analogue Composite Video and Blanking Signal (CVBS), and from this extracts the required data, which is then decoded and stored in memory. The extraction of the data is performed in the digital domain. The first stage is to convert the analogue CVBS signal into a digital form. This is done using an ADC sampling at 12MHz. The data and clock recovery is then performed by a MultiRate Video Input Processor (MuIVIP). From the recovered data and clock the following data types are extracted WST Teletext (625/525), Closed Caption, VPS, WSS. The extracted data is stored in either memory (DRAM) via the Memory Interface or in SFR locations.

8

IC DESCRIPTION
Data Capture Features

APPENDIX

- Video Signal Quality detector - Data Capture for 625 line WST - Data Capture for 525 line WST - Data Capture for US Closed Caption - Data Capture for VPS data (PDC system A) - Data Capture for Wide Screen Signalling (WSS) bit decoding - Automatic selection between 525 WST/625WST - Automatic selection between 625WST/VPS on line 16 of VBI - Real-time capture and decoding for WST Teletext in Hardware, to enable optimised microprocessor throughput - 10 pages stored On-Chip - lnventory of transmitted Teletext pages stored in the Transmitted Page Table (TPT) and Subtitle Page Table (SPT) - Automatic detection of FASTEXT transmission - Real-time packet 26 engine in Hardware for processing accented, G2 and G3 characters - Signal quality detector for WST/VPS data types - Comprehensive Teletext language coverage - Full Field and Vertical Blanking Interval (VBI) data capture of WST data

9

IC DESCRIPTION

APPENDIX

10

IC DESCRIPTION
IC marking and version
Chassis CP 185 IC marking (line 3) DW9361/N1/3-DE1 (note : x is the software version) OSD languages English, Russian Arabic, Melayu

APPENDIX

Text English, Russian Arabic, Melayu

CP 185N/C

DW9381/N3-DE1 (note : x is the software version)

English, Russian, Arabic Melayu, Thailand, HIND

PINNING
SYMBOL n.u. SCL SDA SECAM L' out PIN 1 2 3 4 DESCRIPTION Port 1.3 Not used. I2C bus clock line I2C Data line Port 2.0 : FM sound : PushPull Low AM SECAM L'PushPull High AM SECAM L : High Impedance Port 3.0 : Over Current Protection ADC 1 : For program sorting in ATSS (High Impedance) ADC 2 : local key input (High impedance) ADC 3 : Scart Slow switching input digital ground for -controller core and peripheral port 0.5 ( 8mA current sinking capability ) port 0.6 ( 8mA current sinking capability ) analog ground of teletext decoder and digital ground of TV processor SECAM PLL decoupling 2nd supply voltage TV-processor decoupling digital supply of TV-processor phase-2 filter phase-1 filter ground 3 for TV-processor bandgap decoupling n.u. vertical drive B output vertical drive A output

OCP RF AGC in Key-in S/SW VssC/P LED 1 LED 2 VSSA SEC PLL VP2 DECDIG PH2LF PH1LF GND3 DECBG AVL VDRB VDRA

5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

11

IC DESCRIPTION
SYMBOL IFIN1 IFIN2 IREF VSC TUNERAGC AUDEEM DECSDEM GND2 SNDPLL SNDIF HOUT FBISO AUDEXT EHT0 PLLIF IFVO VP1 CVBSINT GND1 CVBS/Y CHROMA AUDOUT INSSW2 R2IN G2IN B2IN BCLIN BLKIN R0 G0 B0 VDDA VPE VDDC OSCGND XTALIN XTALOUT RESET VDDP Audio Mute Power IR in PIN 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 DESCRIPTION IF input 1 IF input 2 Reference current input vertical sawtooth capacitor tuner AGC output audio deemphasis decoupling sound demodulator ground 2 for TV processor narrow band PLL filter n.u. horizontal output flyback input / sandcastle output external audio input EHT/Overvoltage protection IF PLL loop filter IF video output main supply voltage TV-processor internal CVBS input ground 1 for TV-processor external CVBS/Y input chrominance input (SVHS) audio out 2nd RGB insertion input 2nd R input 2nd G input 2nd B input beam current limiter input black current input RED Output GREEN Output BLUE Output

APPENDIX

analog supply of Teletext decoder and digital supply of TV-Processor (3.3V) OTP programming supply digital supply to core (3.3V) oscillator ground supply crystal oscillator input crystal oscillator output reset digital supply to periphery (3.3V) Port 1.0 : Audio mute output (PushPull ) Port 1.1 : Power output (PushPull ) Interrupt input 0 : R/C Infrared input

12

IC DESCRIPTION

APPENDIX

13

TDA-9361 OR TDA9381

IC DESCRIPTION
2. TDA-7267A
„ Can deliver 3w the 10% 14.5V/8 „ Internal fixed gain 32dB „ No feedback capacitor „ No boucherot cell „ Thermal protection „ Ac short circuit trotection „ Svr capacitor for better ripple Rejection „ Low turn-on/off pop „ Stand-by mode

APPENDIX

PowerDIP 8+8 ORDERING NUMBER : TDA7267A

Decription
The device TDA7267A is a new technology Mono Audio Amplifier in Power DIP package specifically designed for TV application. Thanks to the fully complementary output configuration the device delivers a rail to rail voltage swing without need of boostrap capacitors.

Black Diagram

14

IC DESCRIPTION
ABSOLUTE MAXIMUM RATINGS
Symbol Vs Io Top Ti Tstg Parameter Operating Supply Voltage Output Put Peak Current Operating Temperature Range Junction Temperature Storage Temperature Range Value 18 1.5 0 to 70 150 -40 to 125

APPENDIX

unit V A ... C ... C ... C

PIN CONNECTION (Top View)

Rth with "on Board" Square heat Sink vs. Copper Area

Example of heatsink using PC board copper

15

IC DESCRIPTION
THERAML DATA
Symbol Rth j-amb Rth j-case Parameter Thermal Rasistance junction to ambient Thermal Resistance Junction to case Value 70 15

APPENDIX

unit .../ CW .../ CW

ELECTRICAL CHARACTERISTICS (Tamb = 25...C; Vs = 14.5V; RL=8; f=1KHz; nuless otherwise specified.)
Symbol Vs Is Isb Vo Av RIN Po THD SVR EI Vsb Parameter Supply Voltage Range Quiescent Current Stand-By Current Quiescent Output Voltage voltage Gain Input Impedance Output Power Distortion Supply Voltage Rejection Input Noise Voltage Stand-By Enable Voltage THD = 10% Po = 1W Vripple = 150mVrms; Fripple = 1KHz Rg = 10K; BW = 20Hz to 20KHz 31 50 2.7 100 3 0.1 50 5 10 1 0.3 Pin 3 shorted to GND 7.5 33 Test concition Min. 5 23 Typ. Max. 18 35 0.3 Unit V mA mA V dB K W % dB V V

Figure1. Application Circuit

APPLICATION HINTS : For 14.5V supply and 8 speaker application, its maximum power dissipation is about 1.8W. Assumming that max ambient temperature is 70...C, the required thermal resistance of the device mounted on the PCB with a dissipating area must be equal to : (150-70)/1.8 = 44.4...C/W. Junction to pin thermal resistance of the package is about 15...C/W. That means external heat sink of about 30...C C/W is required. Cu ground plane of PCB can be used as heat dissipating means.

16

IC DESCRIPTION
3. LA78041

APPENDIX

17

IC DESCRIPTION

APPENDIX

18

IC DESCRIPTION

APPENDIX

19

IC DESCRIPTION

APPENDIX

20

IC DESCRIPTION

APPENDIX

21

IC DESCRIPTION

APPENDIX

22

IC DESCRIPTION
4. TDA6107Q

APPENDIX

The TDA6107Q includes three video output amplifiers in one plastic DIL-Bent-SIL 9-pin medium power package, using high voltage DMOS technology, and is intended to drive the three cathodes of a colour CRT directly. To obtain maximum performance, the amplifier should be used with black-current control.

Features
- Typical bandwidth of 5.5 MHz for an output signal of 60 Vpp - High slew rate of 900V/ s - No external components requireds - Very simple application - Single supply voltage of 200V - Internal reference voltage of 2.5 V - Fixed gain of 50. - Black-current stabilisation (BCS) circuit - Thermal protection

Pin description
Pin 1 2 3 4 5 6 7 8 9 Symbol Vi(1) Vi(2) Vi(3) GND Iom VDD VOC(3) VOC(2) VOC(1) Description inverting input 1 inverting input 2 inverting input 3 ground (fim) black current measurement output supply voltage cathode output 3 cathode output 2 cathode output 1

23

IC DESCRIPTION
5. 24C08 8 Kbit EEPROM
features : - 8 Kbit serial I2C bus EEPROM - Single supply voltage : 4.5 V to 5.5 V - 1 Million Erase/Write cycles (minimum) - 40 year data retention (minimum)

APPENDIX

Pin description
Pin No. 1, 2, 3 5 6 7 8 4 Name E0, E1, E2 SDA SCL WC Vcc Vss Description Device address Serial Data/Address Input/Output Serial clock Write control Supply voltage Ground

The memory device is compatible with the I2C memory standard. This is a two wire serial interface that uses a bidirectional data bus and serial clock. The memory carries a built-in 4-bit unique device type identifier code (1010) in accordance with the I2C bus definition.

Serial Clock (SCL) The SCL input is used to strobe all data in and out of the memory. Serial Data (SDA) The SDA pin is bi-directional, and is used to transfer data in or out of the memory

24

IC DESCRIPTION
6. STR-W6753

APPENDIX

25

IC DESCRIPTION

APPENDIX

26

IC DESCRIPTION

APPENDIX

27

IC DESCRIPTION

APPENDIX

28

IC DESCRIPTION

APPENDIX

29

IC DESCRIPTION

APPENDIX

30

IC DESCRIPTION

APPENDIX

31

IC DESCRIPTION

APPENDIX

32

IC DESCRIPTION

APPENDIX

33

IC DESCRIPTION

APPENDIX

34

IC DESCRIPTION

APPENDIX

35

IC DESCRIPTION

APPENDIX

36

IC DESCRIPTION

APPENDIX

37

IC DESCRIPTION

APPENDIX

38

IC DESCRIPTION

APPENDIX

39

IC DESCRIPTION

APPENDIX

40

IC DESCRIPTION

APPENDIX

41

IC DESCRIPTION

APPENDIX

42

IC DESCRIPTION

APPENDIX

43