Text preview for : rqt6744-b.pdf part of panasonic RX-D21 owner's manual



Back to : pana d21 operators manual | Home

Dear customer
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. These operating instructions fundamentally explain the operation of RX-D25.

Supplied accessories
Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts. AC mains lead .......................................................................... 1pc. For United Kingdom: (RJA0053-2X) For Australia and New Zealand: (RJA0035-X) For others: (RJA0019-2K) Remote control transmitter RX-D25 only ............................. 1pc. (EUR648258) For the United Kingdom and Republic of Ireland

Portable Stereo CD System
Operating Instructions
Model No.

RX-D25 RX-D21

shop@
www.panasonic.co.uk (for UK customers only) · Order accessory and consumable items for your product with ease and confidence by telephoning our Customer Care Centre Mon­Friday 9:00 am­ 5:30 pm. (Excluding public holidays.) · Or go on line through our Internet Accessory ordering application. · Most major credit and debit cards accepted. · All enquiries transactions and distribution facilities are provided directly by Panasonic UK Ltd. · It couldn't be simpler! Customer Care Centre For UK customers: 08705 357357 For Republic of Ireland customers: 01 289 8333 Technical Support For UK customers: 0870 1 505610 This Technical Support Hot Line number is for Panasonic PC software related products only. For Republic of Ireland, please use the Customer Care Centre number listed above for all enquiries. For all other product related enquiries, please use the Customer Care Centre numbers listed above.

The illustrations show RX-D25. Note: "EB" on the packaging indicates the United Kingdom. Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference.

E

EB GN

Power sources
Using a household AC outlet
FOR UNITED KINGDOM ONLY READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 7 BEFORE CONNECTION. Connect the AC mains lead firmly to the unit and the outlet.

Using batteries (not included)
The unit cannot be powered by batteries if the AC mains lead is connected.

Memory back-up
During power supply interruption, memory backup batteries (not included) save CD programs and radio stations you have set. These batteries do not power the unit.

To household AC outlet

(R20/LR20, D, UM-1)

Inner row

(R6/LR6, AA, UM-3)

Outer row AC mains lead (included) When to change the batteries Sound quality and operations are affected when the batteries are running low. Replace all six batteries. It is also a good idea to replace all the batteries before recording. Removing the batteries Open the battery cover and insert your finger in the hole on the bottom of the unit and push out. When to change the batteries The batteries last about a year. Connect the unit to AC power before replacing the batteries. · Before connecting or disconnecting the AC mains lead, stop the tape and switch [ ] to "TAPE/ " to turn the unit off. The memory batteries are worn out faster if the cord is disconnected with the power still on. Removing the batteries Press the negative end of the number 4 battery and remove the batteries. (Remove the power batteries first.)

Note · The included AC mains lead is for use with this unit only. Do not use it with other equipment. · The function selector switch does not separate entire unit from mains even if in "TAPE/ " position.

RQT6744-B

Controls
Main unit:
RX-D25 only

Remote control

RX-D25 only

:

The functions of the buttons without descriptions are the same as on the main unit.

H.E.S.

XBS

TUNER

CD

/ / /CLEAR ­/ /+

Concerning the remote control
RX-D25 only

Battery installation
Insert the batteries (not included) observing the correct polarities (e,d).
R6, AA, UM-3
1

FM mode select/CD stop /program clear button ( FM MODE/CLEAR)

2

Correct method of use
RX-D25 only
Remote control signal sensor

About 7 meters in front of the signal sensor

Transmission window

These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily influenced by magnetism. RX-D25

RX-D21

Operation notes · Do not place obstacles between the remote control signal sensor and the remote control unit. · Do not expose the remote control signal sensor to direct sunlight or to the bright light of fluorescent light. · Take care to keep the remote control signal sensor and end of the remote control unit free from dust. To prevent damage · Never place heavy items on it. · Do not disassemble or reconstruct it. · Do not spill water or other liquids into it.

2
RQT6744

The Radio
Normal tuning
3 2 1 5 4

Preset tuning
Preset the stations (twelve FM and twelve AM) to make tuning simpler.

124

3

2

3

1

1


Switch [
(Unit comes on.)


] to "TUNER".


How to preset
Preparation: Tune to the desired station. (Do steps 1­4 on the left.)


(Omit this step if using the remote control)

2 3


While " flashing

" and the frequency are

4

4


Press [MEMORY].
(This completes presetting.)


5

Adjust the volume.

Repeat the above to preset other stations. Note " goes off during presetting, return to step 1. If "

To use auto scan You can search for a station by listening to all tuned-in stations for 8 seconds each. ] to "TUNER". Preparation: Switch [ 1. Press [BAND] to select "FM" or "AM". 2. Press [AUTO SCAN]. Auto scan starts. Indicates auto scan 3. Press [AUTO SCAN] when you find the desired station. Auto scan ends when it reaches the original frequency again. To stop during the process, press [AUTO SCAN].

(Omit this step if using the remote control)

4 3 (Remote control: [4] or [3])

To improve reception
FM: Extend the whip antenna and adjust its direction. AM: Adjust facing of the unit. If noise is excessive in the FM stereo mode " lights up.) Press [FM MODE]. (" Sound will be produced in monaural, but this also reduces noise. " goes out.) Press the button again to cancel. ("

Preset channel

To use preset scan You can search for a station by listening to all preset channels for 8 seconds each. 1. Do steps to above. For remote control, replace [­ / g] or [f/+] described below with [4] 4 or [3]. 3 2. Press and hold [­/ g] or [f/+] until "PS" appears on the display.

1 2

Indicates preset scan 3. Press [­/ g] or [f/+] when you find the desired channel. Preset scan ends after searching through each preset channel once. To stop during the process, press [­/ g] or [f/+].

3
RQT6744



























3 Press [­/g] or [f/+] to select the desired channel (1­12).


"

".





















1 Press [BAND] to select "FM" or "AM". 2 Press [TUNE MODE] to display


To listen to preset channels





























































The frequency changes one step each time a button is pressed. " " lights when an FM stereo broadcast is being received. Automatic tuning Keep [­/ g] or [f/+] depressed and release when the frequency display starts to change. A station with good reception is automatically selected and the process stops. To stop automatic tuning, press [­/ g] or [f/+] again. Note Automatic tuning may stop on a frequency where there is no station if there is interference. Press [­/ g] and [f/+] to tune if this occurs.


While " " and the preset channel are flashing

Press [­/g] or [f/+] to select the desired channel.
(Remote control: [4] or [3]) 4 3





























































Press [­/g] or [f/+] to tune to the desired station.

Press [MEMORY].
Preset channel

































































If " " is on the display, press [TUNE MODE] to clear it off.






























































2 3




Press [BAND] to select "FM" or "AM".

1

Press [MEMORY].

CDs
Normal play 23 1 5 Program play
You can program up to 24 tracks.

4

2

1 3
Track number Play time

1 2


Switch [
(Unit comes on.)


] to "CD".


Ensure CD is stopped before programming.

1 2


Label must face upward.

Press [MEMORY].
The track is programmed.

Program order

Repeat steps 1 and 2 until you have programmed all the tracks you want. Total number of tracks

Total play time of programmed tracks

Play starts from the first track and continues to the last track. Track number in play

3


Press [-/ J].
Play starts in the programmed order.

5

Adjust the volume.

To stop play Press [L]. To pause Press [-/ J] during playback. To resume, press [-/ J]. Hold down [­/ g] (backward) or [f/+] (forward) during playback or when paused. Press [­/ g] (backward) or [f/+] (forward) during playback or when paused.

To stop play Press [L]. "P" is displayed indicating that the program is still active. Press [L] again and "CLr" is displayed; the program is cleared, and the normal play mode is restored. To check program contents Press [­/ g] or [f/+] when "P" is displayed. Display "-- --:-- --": Program equals, or exceeds, 100 minutes but programming and play are still possible. "FULL": 24 tracks have already been programmed. The program is full.

To search forward/ backward To skip forward/ backward

"NO DISC" is displayed if there is no disc in the unit. Note · If interference occurs to radios or televisions, place the unit as far as possible from this equipment. · Do not press [c CD OPEN/CLOSE] during play, pause or immediately after you inserted the CD and closed the CD lid. CD may be scratched. This unit can play CD-DA (digital audio) format audio CD-R that has been finalized (a process that enables CD-R players to play audio CD-R) upon completion of recording. It may not be able to play some CD-R due to the condition of the recording. It cannot play CD-RW.

CD play modes
You can repeat one track ( random order ( ). ), all tracks ( ) or play the tracks in

Press [CD PLAY MODE] before or during playback to select the desired mode.
off (no indication)

These modes remain active until cancelled. You can use repeat mode with program play. Note Random and program play cannot be done at the same time.

4
RQT6744

































































4


Press [-/ J] to start play.

Elapsed play time





























































3

Push [c CD OPEN/CLOSE] to close the CD lid.

Total playing time

Specified track number





























































Push [c CD OPEN/CLOSE] to open the CD lid and insert the CD.

Press [­/g] or [f/+] to select the desired track.

































































Cassettes
This unit is suitable for playing normal tapes, but high and metal position tapes will not be played to their full potential.

4

Adjust the volume.

2 3 1

4

To stop play Press [L/c STOP/EJECT]. (Unit is switched off.) To pause To rewind/ fast-forward Press [J PAUSE] during playback. To resume, press [J PAUSE]. Press [) REW/REV] (to rewind) or [( FF/CUE] (to fast-forward) in the stop mode.

To find a particular Press [) REW/REV] (to search backward) or [( FF/CUE] (to search forward) during spot playback. Play is resumed when the button is released.

Press [L/c STOP/EJECT] to open the deck and load a cassette.
Close deck by hand. Side to be played facing you

Exposed tape facing upward

3

Press [/ PLAY] to start play.
Unit comes on and play starts.

Recording
You can record radio broadcasts or CDs. Before recording · This unit is suitable for recording normal tapes, but it cannot record onto high and metal position tapes to their full potential and prior recordings will not be erased correctly. · The recording level is set automatically. · Take up the leader tape before proceeding. Leader tape (Recording cannot be made.)

3

Press [[

] to start recording.

[/ PLAY] is also depressed with [[ ]. Recording starts (one side only). The CD also starts playing if in CD mode.

1

3

To stop recording Press [L/c STOP/EJECT]. (The CD does not stop.) To stop recording temporarily Press [J PAUSE]. (The CD does not stop.) Press once again to resume recording. To record on the other side of the cassette ]. Turn the cassette over and press [[ If the CD finishes before the cassette Recording continues. Press [L/c STOP/EJECT] to stop it. If the cassette finishes before the CD The CD continues playing. Press [L] to stop it. Erasure prevention Use a screwdriver or similar object to break out the tab. Side A Tab for Side A

Tab for Side B

1

Press [L/c STOP/EJECT] to open the deck and load a cassette.
Close deck by hand. Side to be recorded facing you

Exposed tape facing upward

2

Select the source to be recorded.
When recording radio broadcasts Tune in the station. (Do steps 1­4 of "Normal tuning" on page 3.) When recording CDs Insert the CD to be recorded. (Do steps 1­3 of "Normal play" on page 4.) If you want to record programmed tracks, program desired tracks before proceeding to step 3.

To re-record on a protected cassette Cover the hole with adhesive tape. Adhesive tape To erase a tape ] to "TAPE/ ". 1. Set [ 2. Insert the cassette with the side to be erased facing towards you and the exposed tape facing up. ]. 3. Press [[ [/ PLAY] is depressed at the same time. Note Noise may be recorded if this unit is near a TV. Keep the units at least 1.5 meters apart. Changes to volume and sound quality do not affect recording. To prevent interruptions to recording, supply AC power to the unit or replace the batteries. Your attention is drawn to the fact that recording pre-recorded tapes or discs or other published or broadcast material may infringe copyright laws.

5
RQT6744

























































































































































































































































1 2


Switch [

] to "TAPE/S".

Note · The unit is on in the pause mode. Stop tape to turn the unit off by pressing [L/c STOP/EJECT] when leaving the unit. · Do not press [/ PLAY] when rewinding or fast-forwarding, as this may jam the tape. Be sure to press [L/c STOP/EJECT] before the next operation. Full auto-stop The automatic stop system will release the buttons when the tape reaches the end during play, recording, fast forwarding or rewinding.







































































CAUTION!
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

NORSK

ADVARSEL!
DETTE PRODUKTET ANVENDER EN LASER. BETJENING AV KONTROLLER, JUSTERINGER ELLER ANDRE INNGREP ENN DE SOM ER BESKREVET I DENNE BRUKSANVISNING, KAN FØRE TIL FARLIG BESTRÅLING. DEKSLER MÅ IKKE ÅPNES, OG FORSØK ALDRI Å REPARERE APPARATET PÅ EGENHÅND. ALT SERVICE OG REPARASJONSARBEID MÅ UTFØRES AV KVALIFISERT PERSONELL.

CAUTION!

PLACE · DO NOT INSTALL, ORCABINET BOOKCASE, BUILT-IN

· · ·

THIS UNIT, IN A OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS. DO NOT OBSTRUCT THE UNIT'S VENTILATION OPENINGS WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS. DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS LIGHTED CANDLES, ON THE UNIT. DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY FRIENDLY MANNER.

ADVARSEL!

EN BOKHYLLE, · APPARATET MÅ IKKE PLASSERES IET ANNET LUKET INNEBYGGET KABINETT ELLER KET STED HVOR VENTILASJONSFORHOLDENE ER UTILSTREKKELIGE. SØRG FOR AT GARDINER ELLER LIGNENDE IKKE FORVERRER VENTILASJONSFORHOLDENE, SÅ RISIKO FOR ELEKTRISK SJOKK ELLER BRANN FORÅRSAKET AV OVERHETING UNNGÅS. APPARATETS VENTILASJONSÅPNINGER MÅ IKKE DEKKES TIL MED AVISER, BORDDUKER, GARDINER OG LIGNENDE. PLASSER IKKE ÅPEN ILD, SLIK SOM LEVENDE LYS, OPPÅ APPARATET. BRUKTE BATTERIER MÅ KASSERES UTEN FARE FOR MILJØET.

· · ·

WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.

ADVARSEL:
FOR Å REDUSERE FAREN FOR BRANN, ELEKTRISK STØT ELLER SKADER PÅ PRODUKTET, MÅ DETTE APPARATET IKKE UTSETTES FOR REGN, FUKTIGHET, VANNDRÅPER ELLER VANNSPRUT. DET MÅ HELLER IKKE PLASSERES GJENSTANDER FYLT MED VANN, SLIK SOM BLOMSTERVASER, OPPÅ APPARATET.

DETTE APPARATET ER BEREGNET TIL BRUK UNDER MODERATE KLIMAFORHOLD.

SUOMI

Precautions
· · ·
Avoid using or placing this unit near sources of heat. Do not leave it in an automobile exposed to direct sunlight for a long time with the doors and windows closed as this may deform the cabinet. Avoid cuts, scratches, or poor connections in the AC mains lead, as they may result in possible fire or electric shock hazard. Also, excessive bending, pulling or splicing of the lead should be avoided. Do not unplug the AC mains lead by pulling on the lead. To do so may cause premature failure or shock hazard. Do not operate this unit on AC mains in a bathroom, as a potential shock hazard may result. When not in use, disconnect the AC mains lead from the household AC outlet.

VAROITUS!
LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄ KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA ALTISTAA KÄYTTÄJÄN TURVALLISUUSLUOKAN 1 YLITTÄVÄLLE NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE.

VAROITUS!

LAITETTA · ÄLÄ ASENNA TAI LAITA TÄTÄTAI MUUHUNKABINETTITYYPPISEEN KIRJAKAAPPIIN SULJETTUUN TILAAN, JOTTA TUULETUS ONNISTUISI. VARMISTA, ETTÄ VERHO TAI MIKÄÄN MUU MATERIAALI EI HUONONNA TUULETUSTA, JOTTA VÄLTETTÄISIIN YLIKUUMENEMISESTA JOHTUVA SÄHKÖISKU- TAI TULIPALOVAARA. ÄLÄ PEITÄ LAITTEEN TUULETUSAUKKOJA SANOMALEHDELLÄ, PÖYTÄLIINALLA, VERHOLLA TAI MUULLA VASTAAVALLA ESINEELLÄ. ÄLÄ ASETA PALAVAA KYNTTILÄÄ TAI MUUTA AVOTULEN LÄHDETTÄ LAITTEEN PÄÄLLE. HÄVITÄ PARISTOT LUONTOA VAHINGOITTAMATTOMALLA TAVALLA.

· ·

· · ·

CLASS 1 LASER PRODUCT
(Back of product)

LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT
DANGER ADVARSEL VARO! VARNING ADVARSEL VORSICHT
INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. AVOID DIRECT EXPOSURE TO BEAM. USYNLIG LASERSTRÅLING VED ÅBNING, NÅR SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION. UNDGÅ UDSÆTTELSE FOR STRÅLING. AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA NÄKYMÄTÖNTÄ LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN. OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD OCH SPÄRREN ÄR URKOPPLAD. BETRAKTA EJ STRÅLEN. USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPNES OG SIKKERHEDSLÅS BRYTES. UNNGÅ EKSPONERING FOR STRÅLEN. UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET UND SICHERHEITSVERRIEGELUNG ÜBERBRÜCKT. NICHT DEM STRAHL AUSSETZEN.

VAROITUS:
TULIPALO-, SÄHKÖISKUVAARAN TAI TUOTETTA KOHTAAVAN MUUN VAHINGON VÄHENTÄMISEKSI EI LAITETTA SAA ALTISTAA SATEELLE, KOSTEUDELLE, VESIPISAROILLE TAI ROISKEELLE, EIKÄ NESTETTÄ SISÄLTÄVIÄ ESINEITÄ, KUTEN ESIMERKIKSI MALJAKOITA, SAA ASETTAA LAITTEEN PÄÄLLE. TÄMÄ LAITE ON TARKOITETTU LEUDOSSA ILMASTOSSA. KÄYTETTÄVÄKSI

Inside of product Tuotteen sisällä Produktets innside

This product may receive radio interference caused by mobile telephones during use. If such interference is apparent, please increase separation between the product and the mobile telephone.

6
RQT6744

Maintenance
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth dipped in a soap-andwater solution or a weak detergent solution. · Never use alcohol, paint thinner or benzine to clean this unit. · Before using chemically treated cloth, read the instructions that came with the cloth carefully.

Using headphones (not included)
Turn down the volume and connect the headphones to the [PHONES] jack.
Plug type: 3.5 mm stereo Note Avoid listening for prolonged periods of time to prevent hearing damage.

PHONES

Tape head care
Clean the heads regularly to assure good quality playback and recording. Use a cleaning tape (not included).

Use of Batteries
If this unit is not used for a long period of time or is used only from an AC power source, remove all the batteries to prevent potential damage due to possible battery leakage. · Align the poles (+ and ­) properly when inserting the batteries. · Do not mix old and new batteries or different types of batteries. · Do not recharge ordinary dry cell batteries. · Do not heat or disassemble the batteries. Do not allow them to contact flame or water. · Do not keep together with metallic objects such as necklaces. · Do not use rechargeable type batteries. · Do not use batteries if the covering has been peeled off. Mishandling of batteries can damage other items, cause damage to the unit, and may cause a fire through short-circuiting or electrolyte leakage. If electrolyte leaks from the batteries, consult your dealer. Wash thoroughly with water if electrolyte comes in contact with any part of your body.

·

Lens care
Clean the lens regularly to prevent malfunctions. Use a blower to remove dust and a cotton swab if it is extremely dirty. Recommended product: Lens cleaner kit (SZZP1038C). Lens

Caution for AC Mains Lead
(For United Kingdom)
("EB" area code model only)
For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark m or the BSI mark o on the body of the fuse. If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local dealer.

WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E, BY THE EARTH SYMBOL n OR COLOURED GREEN OR GREEN/YELLOW. THIS PLUG IS NOT WATERPROOF--KEEP DRY.

Before use
Remove the connector cover.

How to replace the fuse
The location of the fuse differ according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the instructions below. Illustrations may differ from actual AC mains plug. 1. Open the fuse cover with a screwdriver.

CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13-AMPERE SOCKET.
If a new plug is to be fitted please observe the wiring code as stated below. If in any doubt please consult a qualified electrician.

Figure A

Figure B

~

Fuse cover

2. Replace the fuse and close or attach the fuse cover.

IMPORTANT
The wires in this mains lead are coloured in accordance with the following code: Blue: Neutral, Brown: Live. As these colours may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black or Blue. The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Brown or Red.

Figure A
Fuse (5 ampere)

Figure B
Fuse (5 ampere)

7
RQT6744

Audio software
Take note of the following points to extend the life of your equipment. Always read the instructions provided with the software.

Specifications
Frequency range FM AM Sampling frequency Decoding Beam source Pickup Bølgelengde Laserstyrke 87.50­108.00 MHz (50 kHz steps) 522­1629 kHz (9 kHz steps) 44.1 kHz 16 bit linear Semiconductor laser (wavelength 780 nm) 780 nm Ingen farlig stråling sendes ut (med sikkerhets-beskyttelse) 2 channel, stereo Less than possible measurement data 1 bit DAC 4 track, 2 channel, stereo Variable sound monitor AC bias Multi Pole magnet 50­12000 Hz 10 cm 4 x 2 1.5 cm PHONES: 3.5 mm stereo (32 )

Discs
Choose discs with this mark: Continued use of irregular shaped CDs can damage the unit.

Do not
· use CDs with labels and stickers that are coming off or with adhesive exuding from under labels and stickers. · attach scratch-proof covers or any other kind of accessory. · write anything on the CD. · clean CDs with liquids.(Wipe with a soft, dry cloth.) · use CDs printed with label printers available on the market. · load a blank CD-R as it will cause abnormal malfunction and may damage the CD-R.

No. of channels Wow and flutter D/A converter Track system Monitor system Recording system Erasing system Frequency range Normal position Speakers Full range Centre speaker (RX-D25 only) Jacks Output Power requirement AC Battery Memory back-up

Cassette tapes
· Tapes exceeding 100 minutes are thin and can break or get caught in the mechanism. · Tape slack can get caught up in the mechanism and should be taken up before the tape is played. · Endless tapes can get caught up in the deck's moving parts if used incorrectly.

Dimensions (WxHxD) Mass

230-240 V, 50 Hz Power consumption: 11 W 9 V (Six R20/LR20, D, UM-1 batteries) · Do not use rechargeable type batteries. 6 V (Four R6/LR6, AA, UM-3 batteries) · Do not use rechargeable type batteries. 420 x 167 x 275 mm (RX-D25) 3.6 kg without batteries (RX-D21) 3.4 kg without batteries

Note Specifications are subject to change without notice. Mass and dimensions are approximate.

Troubleshooting guide
If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to the directory of Authorized Service Centers (enclosed with this unit) to locate a convenient service center, or consult your dealer for instructions.

Common Problem
The unit doesn't work on batteries. "UO1" is displayed. Is the AC mains lead connected to the unit? Disconnect when using batteries. Have the batteries been inserted correctly? Check that the poles (+ and ­) are correctly aligned. Replace the batteries or use household AC power.

CD
"E" is displayed. Play doesn't start or display is incorrect. Indicates an incorrect operation. Read the instructions. Clean the CD. Wait for an hour for condensation to dry, then try again. Make sure the label is facing up. Replace the CD if it is scratched, warped, or irregularly shaped.

Cassette
Recording not possible. Poor sound quality. The cassette cannot be ejected or the lid can't be closed when loading a cassette. Has the cassette's tab been removed? Cover the hole with adhesive tape. Clean the heads. The batteries are flat. Replace the batteries or connect to household AC power. Press [/ PLAY] then [L/c STOP/EJECT].

Radio
A lot of noise. Is another remote control being used? Use it further away from this unit. Is a TV on? Move the unit away from the TV or turn it off. RX-D25 only Check the batteries are inserted correctly. Replace the batteries if they are worn.

Remote control

The remote control doesn't work.

Matsushita Electric Industrial Co., Ltd. Web Site: http://www.panasonic.co.jp/global/

En

RQT6744-B
L1102KW0