Text preview for : ViewSonic Q9b-3 VS11455 pow. JT198NP4FD3 LD7575.pdf part of ViewSonic Q9b-3 VS11455 Service Manual



Back to : ViewSonic Q9b-3 VS11455 p | Home

Service Manual
ViewSonic Q9b-3
Model No. VS11455 19" Color TFT LCD Display

(Q9b-3_SM Rev. 1a Sep. 2006)

ViewSonic 381 Brea Canyon Road, Walnut, California 91789 USA - (800) 888-8583

Copyright Copyright © 2006 by ViewSonic Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of ViewSonic Corporation. Disclaimer ViewSonic makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranty of merchantability or fitness for any particular purpose. Further, ViewSonic reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of ViewSonic to notify any person of such revision or changes. Trademarks Optiquest is a registered trademark of ViewSonic Corporation. ViewSonic is a registered trademark of ViewSonic Corporation. All other trademarks used within this document are the property of their respective owners.

Revision History
Revision
1a

SM Editing Date
9/15/2006

ECR Number

Description of Changes
Initial Release

Editor
Jamie Chang

ViewSonic Corporation

i

Confidential - Do Not Copy

Q9b-3

TABLE OF CONTENTS

1. 2. 3. 4. 5. 6. 7. 8. 9.

Precautions and Safety Notices Specification Front Panel Function Control Description Circuit Description Adjustment Procedure Troubleshooting Flow Chart Recommended Spare Parts List Exploded Diagram and Exploded Parts List Block Diagram

1 4 7 12 17 38 43 51 55 56 64

10. Schematic Diagrams 11. PCB Layout Diagrams

ViewSonic Corporation

ii

Confidential - Do Not Copy

Q9b-3

1. Precautions and Safety Notices
1. Appropriate Operation (1) (2) (3) (4) (5) (6) (7) (8) (9) Turn off the product before cleaning. Use only a dry soft cloth when cleaning the LCD panel surface. Use a soft cloth soaked with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not used for a long period of time. If smoke, abnormal noise, or strange odor is present, immediately switch the LCD display off. Do not touch the LCD panel surface with sharp or hard objects. Do not place heavy objects on the LCD display, video cable, or power cord. Do not use abrasive cleaners, waxes or solvents for your cleaning. Do not operate the product under the following conditions: - Extremely hot, cold or humid environment. - Areas susceptible to excessive dust and dirt. - Near any appliance generating a strong magnetic field. - Place in direct sunlight.

2. Caution No modification of any circuit should be attempted. Service work should only be performed after you are thoroughly familiar with all of the following safety checks and servicing guidelines. 3. Safety Check Care should be taken while servicing this LCD display. Because of the high voltage used in the inverter circuit, the voltage is exposed in such areas as the associated transformer circuits. 4. Power Supply Requirements The external AC power operating range shall be from 90 to 264Vac 5. LCD Module Handling Precautions 5.1. Handling Precautions (1) Since front polarizer is easily damaged, pay attention not to scratch it. (2) Be sure to turn off power supply when inserting or disconnecting from input connector. (3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots. (4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. (5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. (6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when handling. (7) Do not open nor modify the Module Assembly. (8) Do not press the reflector sheet at the back of the module to any directions. (9) In case if a Module has to be put back into the packing container slot after once it was taken out from the container, do not press the center of the CCFL Reflector edge. Instead, press at the far ends of the CFL Reflector edge softly. Otherwise the TFT Module may be damaged. (10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface Connector of the TFT Module. (11) After installation of the TFT Module into an enclosure (LCD monitor housing, for example), do not twist nor bend the TFT Module even momentary. At designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT Module may be damaged. (12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please follow local ordinances or regulations for disposal. (13) Small amount of materials having no flammability grade is used in the LCD module.

ViewSonic Corporation

1

Confidential - Do Not Copy

Q9b-3

The LCD module should be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be applied exemption. (14) The LCD module is designed so that the CFL in it is supplied by Limited Current Circuit (IEC60950 or UL1950). Do not connect the CFL in Hazardous Voltage Circuit. 5.2. Handling and Placing Methods Correct Methods: Incorrect Methods: Only touch the metal frame of the LCD panel Surface of the LCD panel is pressed by fingers or the front cover of the monitor. Do not touch and that may cause "Mura" the surface of the polarizer.

Take out the monitor with cushions

Taking out the monitor by grasping the LCD panel. That may cause "Mura"

ViewSonic Corporation

2

Confidential - Do Not Copy

Q9b-3

Place the monitor on a clean and soft foam pad. Placing the monitor on foreign objects. That could scratch the surface of the panel or cause "Mura"

ViewSonic Corporation

3

Confidential - Do Not Copy

Q9b-3

2. Specification
1. General Requirements General Specifications Test Resolution & Frequency Test Image Size Contrast and Brightness Controls

"1280 x 1024" @ 60Hz Full Size Factory Default: Contrast =100%, Brightness = 100%

2. Signal Interface Video Interface Analog Input Connector Default Input Connector Video Cable Connector DB-15 Pin out Video Signals Video Impedance Exclusions 3. Power Power Supply Input Voltage Range Power Dissipation 4. Electrical Requirements Horizontal / Vertical Frequency Horizontal Frequency Vertical Refresh Rate

DB-15 (Analog) Defaults to the first detected input Compliant DDC 1/2B. 1. Video RGB (Analog) Separate Sync 75 Ohms (Analog), 100 Ohms (Digital) Not compatible with interlaced video.

90 to 264 VAC 37Watts (Typ.)

Maximum Pixel Clock Sync Polarity

30 ­ 80 KHz 56­ 75 Hz * For resolution 1280 x 1024, the vertical Refresh rate up to 75 Hz; for there rest Resolutions, the vertical refresh rate up To 75Hz. 135 MHz. Independent of sync polarity.

Timing Table Item Timing Analog 1 640 x 480 @ 60Hz, 31.5kHz Yes 2 640 x 480 @ 67Hz, 35.0kHz Yes 3 640 x 480 @ 75Hz, 37.5kHz Yes 4 720 x 400 @ 70Hz, 31.5kHz Yes 5 800 x 600 @ 56Hz, 35.1kHz Yes 6 800 x 600 @ 60Hz, 37.9kHz Yes 7 800 x 600 @ 75Hz, 46.9kHz Yes 8 800 x 600 @ 72Hz, 48.1kHz Yes 9 832 x 624 @ 75Hz, 49.7kHz Yes 10 1024 x 768 @ 60Hz, 48.4kHz Yes 11 1024 x 768 @ 70Hz, 56.5kHz Yes 12 1024 x 768 @ 75Hz, 60.0kHz Yes 13 1280 x 1024 @ 60Hz, 63.4kHz Yes 14 1280 x 1024 @ 75Hz, 79.97kHz Yes Changing Modes Maximum Mode Change Blank Time for image Under 5 seconds (Maximum) stability. Note: 1 seconds (Typ.) for recognized timings 1) Excluding "Auto Adjust" time 1-2 seconds (Typ.) for unrecognized timing 2) Under DOS mode (640 x 350, 720 x 400 & 640 x 400), there is no "Auto Adjust" feature. 3) The monitor needs to do "Auto Adjust" the first time a new mode is detected.

ViewSonic Corporation

4

Confidential - Do Not Copy

Q9b-3

5. LCD Panel Panel Characteristics 1st Souce: Panel Type Type Active Size Pixel Arrangement Pixel Pitch # of Backlights Backlight Life Panel Performance Luminance ­ Condition: CT = 6500K, Contrast = Max, Brightness = Max Brightness Uniformity Contrast Ratio Color Depth Viewing Angle (Horizontal) Viewing Angle (Vertical) Response Time 10%-90% @ Ta=25°C 2nd and 3rd Source: Panel Type Type Active Size Pixel Arrangement Pixel Pitch # of Backlights Backlight Life Panel Performance Luminance ­ Condition: CT = 6500K, Contrast = Max, Brightness = Max Brightness Uniformity Contrast Ratio Color Depth Viewing Angle (Horizontal) Viewing Angle (Vertical) Response Time 10%-90% @ Ta=25°C

HSD190ME13-A02 TN type with LVDS interface 376.32 (H) x 301.06 (V) RGB Vertical Stripe 0.294 mm 4 CCFL edge-light (2 top / 2 bottom) 40,000 Hours (minimum) 250 cd/m2 (typ. after 30-minute warm-up)

80% Entire Area(Typ) 600:1 (typ.), 450:1 (minimum) 16.2M colors (6-bits+2 bits FRC) 140 degrees @ CR>10 130 degrees @ CR>10 8ms(Typ.)

2nd panel source : HSD190ME13-A10 3rd Panel source : HSD190ME13-A16 TN type with LVDS interface 376.32 (H) x 301.056 (V) RGB Vertical Stripe 0.294 mm 4 CCFL edge-light (2 top / 2 bottom) 40,000 Hours (minimum) 300 cd/m2 (typ. after 30-minute warm-up)

75%(Typ)/70%min 700:1 (typ.), 450:1 (minimum) 16.2million colors (6 bits+2bits data) 160degrees @ CR>10 155 degrees @ CR>10 8ms (Typ.)

6. Mechanical Dimensions Width Height Depth Monitor Weight Ergonomics Tilt Up Tilt Down

407 mm 414 mm 200 mm 4.85kg / 10.67 lbs 20 DEGREES MINIMUM -5 degrees

ViewSonic Corporation

5

Confidential - Do Not Copy

Q9b-3

Package Specifications Width Height Depth Gross Weight 7. Environmental Environmental Conditions Operating Temperature Storage Temperature Operating Relative Humidity Storage Relative Humidity Operating Altitude Storage Altitude

465 mm 445 mm 150 mm 5.55kg (12.21 lbs)

0°C to +40°C -20°C to +60°C 10% to 90% RH Non-Condensing 5% to 90% RH Non-Condensing 0 to +3,000 meters 0 to +12,000 meters

ViewSonic Corporation

6

Confidential - Do Not Copy

Q9b-3

3. Front Panel Function Control Description

Main Menu with OSD controls

Front Control Panel shown below in detail

Scrolls through menu options and adjusts the displayed control. Also a shortcut to display the Contrast adjustment control screen.

Displays the Main Menu or exits the control screen and saves adjustments.

Displays the control screen for the highlighted control. Also toggles between two controls on some screens. Also a shortcut to Auto Image Adjust.

Power light Green = ON Orange = Power Saving

Standby Power On/Off

ViewSonic Corporation

7

Confidential - Do Not Copy

Q9b-3

Do the following to adjust the display setting: 1. To display the Main Menu, press button [1].

NOTE: All OSD menus and adjustment screens disappear automatically after about 30 seconds. This is adjustable through the OSD timeout setting in the setup menu. 2. To select a control to adjust, press or to scroll up or down in the Main Menu. 3. After the desired control is selected, press button [2]. A control screen like the one shown below appears.
The line at the bottom of the screen shows the current functions of buttons 1 and 2: Exit or select the Brightness control.

4. To adjust the setting, press the up or down buttons. 5. To save the adjustments and exit the menu, press button [1] twice. The following tips may help you optimize your display: · Adjust the computer's graphics card so that it outputs a 1280 x 1024 @ 60Hz video signal to the LCD display. (Look for instructions on "changing the refresh rate" in the graphics card's user guide.) · If necessary, make small adjustments using H. POSITION and V. POSITION until the screen image is completely visible. (The black border around the edge of the screen should barely touch the illuminated "active area" of the LCD display.)

ViewSonic Corporation

8

Confidential - Do Not Copy

Q9b-3

Main Menu Controls
Adjust the menu items shown below by using the up and down buttons. Control Explanation Auto Image Adjust automatically sizes, centers, and fine tunes the video signal to eliminate waviness and distortion. Press the [2] button to obtain a sharper image. NOTE: Auto Image Adjust works with most common video cards. If this function does not work on your LCD display, then lower the video refresh rate to 60 Hz and set the resolution to its pre-set value. Contrast adjusts the difference between the image background (black level) and the foreground (white level). Brightness adjusts background black level of the screen image. Color Adjust provides several color adjustment modes, including preset color temperatures and a User Color mode which allows independent adjustment of red (R), green (G), and blue (B). The factory setting for this product is 6500K (6500 Kelvin).

9300K-Adds blue to the screen image for cooler white (used in most office settings with fluorescent lighting). 6500K-Adds red to the screen image for warmer white and richer red. 5400K-Adds green to the screen image for a darker color. User Color Individual adjustments for red (R), green (G), and blue (B). 1. To select color (R, G or B) press button [2]. 2. To adjust selected color, press or . Important: If you select RECALL from the Main Menu when the product is set to a Preset Timing Mode, colors return to the 6500K factory preset.

ViewSonic Corporation

9

Confidential - Do Not Copy

Q9b-3

Control

Explanation Information displays the timing mode (video signal input) coming from the graphics card in the computer, the LCD model number, the serial number, and the ViewSonic® website URL. See your graphics card's user guide for instructions on changing the resolution and refresh rate (vertical frequency). NOTE: VESA 1280 x 1024 @ 60Hz (recommended) means that the resolution is 1280 x 1024 and the refresh rate is 60 Hertz. Manual Image Adjust displays the Manual Image Adjust menu.

The Manual Image Adjust controls are explained below: H. Size (Horizontal Size) adjusts the width of the screen image. H./V. Position (Horizontal/Vertical Position) moves the screen image left or right and up or down. Fine Tune sharpens the focus by aligning the text and/or graphics with pixel boundaries. Sharpness adjusts the clarity and focus of the screen image. Setup Menu displays the menu shown below:

The Setup Menu controls are explained below:

ViewSonic Corporation

10

Confidential - Do Not Copy

Q9b-3

Control

Explanation Language Select allows the user to choose the language used in the menus and control screens. Resolution Notice advises the optimal resolution to use. OSD Position allows the user to move the OSD menus and control screens. OSD Timeout sets the length of time the OSD screen is displayed. For example, with a "15 second" setting, if a control is not pushed within 15 seconds, the display screen disappears. Memory Recall returns the adjustments back to factory settings if the display is operating in a factory Preset Timing Mode listed in the Specifications of this manual. Exception: This control does not affect changes made with the User Color control, Language or Power Lock setting. Audio Adjust Volume increases the volume, decreases the volume, and mutes the audio. Mute temporarily silences audio output.

Short Cut Key

Function Key : 5 Keys !
[1] [2]

1

2



Main Menu 1. Auto Image Adjust 2. toggle 720x400 and 640x400 mode when input 720x400 or 640x400 mode to immediately activate Brightness menu. to immediately activate Contrast menu. recall both of Contrast and Brightness to default Power Lock OSD Lock Burning mode Factory Mode

[] [] []+ [] [1] + [] [1] + [] []+ [] + No signal message OSD Signal + [] + [2] + [ ]

Remark : All the short cuts function are only available while OSD off (exclude Power Lock and OSD Lock)
Q9b-3

ViewSonic Corporation

11

Confidential - Do Not Copy

4. Circuit Description
A. DC-DC CONVERTER This brick convert is the 110-220AC input voltage to 12V AND 5V output for invert use and panel use and system controller use . 5V Out put at L804 VCC 12V In put at L803,F901 B. Scaling controller The ADC is to convert RGB analog signal to digital signal that scaling chip can acknowledge. The HSYNC input receives a logic signal and provides the frequency reference for pixel clock generation. The scaling IC is to converts the input signal ranging from VGA to SXGA into SXGA resolution that panel can acknowledge. The scaling IC is to converts the input signal ranging from VGA to SXGA into SXGA resolution that panel can acknowledge. GENERAL DESCRIPTION The TSUM16AK is total solution graphics processing IC for LCD monitors with panel resolutions up to SXGA. It is configured with a high-speed integrated triple-ADC/PLL, a high quality display processing engine, and an integrated output display interface that can support LVDS panel interface format. To further reduce system costs, the TSUM16AK also integrates intelligent power management control capability for green-mode requirements and spread-spectrum support for EMI management. The TSUM16AK incorporates the world's first coherent oversampled RGB graphics ADC in a monitor controller system1. The oversampling ADC samples the input RGB signals at a frequency that is much higher than the signal source pixel rate. This can preserve details in the video signal that ordinarily would be lost due to input signal jitter or bandwidth limitations in non-oversampled systems. The TSUM16AK also incorporates a new Dynamic Frame Rate (DFR) generator2 for the digital output video to the display panel that preserves the advantages of a fixed output clock rate, while eliminating the output end of frame short-line. PIN DESCRIPTION Analog Interface Pin Name HSYNC0 VSYNC0 REFP REFM RIN0P RIN0M SOGIN0 GIN0P GIN0M BIN0P BIN0M REXT Analog Input Analog Input Analog Input Analog Input Analog Input Analog Input Analog Input Pin Type Schmitt Trigger Input w/ 5V-tolerant Schmitt Trigger Input w/ 5V-tolerant Function Analog HSYNC input Pin 63 64 62 61 59 58 57 56 55 54 53 51 input

Analog VSYNC input Internal Internal ADC top de-coupling pin ADC bottom de-coupling pin

Analog red input Reference ground for analog red input Sync-on-green Analog green input Reference ground for analog input green Analog input blue Reference ground for analog input blue External resistor 390 ohm to AVDD_ADC

ViewSonic Corporation

12

Confidential - Do Not Copy

Q9b-3

Serial Flash Interface Pin Name SDO CSZ SCK SDI LVDS Interface Pin Name LVA0M LVA0P LVA1M LVA1P LVA2M LVA2P LVA3M LVA3P LVACKM Pin Type Output Output Output Output Output Output Output Output Output Function A-Link Negative LVDS Data Differential Output A-Link Positive LVDS Data Differential Output A-Link Negative LVDS Data Differential Output A-Link Positive LVDS Data Differential Output A-Link Negative LVDS Data Differential Output A-Link Positive LVDS Data Differential Output A-Link Negative LVDS Data Differential Output A-Link Positive LVDS Data Differential Output A-Link Negative LVDS Differential Clock Output Pin 114 113 112 111 110 109 106 105 108 Pin Type Input w/ 5V-Tolerant Output Output Output Function SPI Flash Data Output Serial SPI Flash Chip Select SPI Flash Serial Clock SPI Flash Data Input Serial Pin 70 71 72 73

Pin Name LVACKP LVB0M LVB0P LVB1M LVB1P LVB2M LVB2P LVB3M LVB3P LVBCKM LVBCKP

Pin Type Output Output Output Output Output Output Output Output Output Output Output

Function A-Link Positive LVDS Differential Clock Output B-Link Negative LVDS Data Differential Output B-Link Positive LVDS Data Differential Output B-Link Negative LVDS Data Differential Output B-Link Positive LVDS Data Differential Output B-Link Negative LVDS Data Differential Output B-Link Positive LVDS Data Differential Output B-Link Negative LVDS Data Differential Output B-Link Positive LVDS Data Differential Output B-Link Negative LVDS Differential Clock Output B-Link Positive LVDS Differential Clock Output

Pin 107 127 126 125 124 123 122 119 118 121 120

ViewSonic Corporation

13

Confidential - Do Not Copy

Q9b-3

GPIO Interface Pin Name GPIO_P12 PWM1/ GPIO_P25 GPIO_P00/ SAR1 GPIO_P01/ SAR2 GPIO_P02/ SAR3 GPIO_P03 GPIO_P06 GPIO_P07 PWM0/ GPIO_P26 GPIO_P13 GPIO_P14 GPIO_P16/ PWM2 Pin Type I/O w/ 5V-tolerant I/O w/ 5V-tolerant I/O w/ 5V-tolerant I/O w/ 5V-tolerant I/O w/ 5V-tolerant I/O w/ 5V-tolerant I/O w/ 5V-tolerant I/O w/ 5V-tolerant I/O w/ 5V-tolerant I/O w/ 5V-tolerant I/O w/ 5V-tolerant I/O w/ 5V-tolerant Function General Purpose Input/Output; programmable driving strength 4mA Pin 20 21 23 24 25 26 27 28 29 30 31 35

Pulse Width Modulation Output; 4mA driving strength/ General Purpose Input/Output; 4mA driving strength General Purpose Input/Output; 4mA driving strength/ SAR ADC Input General Purpose Input/Output; 4mA driving strength/ SAR ADC Input General Purpose Input/Output; 4mA driving strength/ SAR ADC Input General Purpose Input/Output; programmable driving strength 4mA

General Purpose Input/Output; 6/12mA programmable driving strength General Purpose Input/Output; 6/12mA programmable driving strength Pulse Width Modulation Output; 4mA driving strength/ General Purpose Input/Output; 4mA driving strength Purpose Input/Output; 4mA General driving strength Purpose Input/Output; 4mA General driving strength General Purpose Input/Output; 4mA Pulse driving strength/ idth Modulation W Output; 4mA driving strength

Pin Name GPIO_P15 /PWM0 GPIO_P23 GPIO_P22 GPIO_P11/ I2C_MDA GPIO_P10/ I2C_MCL PWM2/ GPIO_P24 GPIO_P27 /PWM1

Pin Type I/O w/ 5V-tolerant I/O w/ 5V-tolerant I/O w/ 5V-tolerant I/O w/ 5V-tolerant I/O w/ 5V-Tolerant I/O w/ 5V-tolerant I/O w/ 5V-tolerant

Function General Purpose Input/Output; 4mA driving strength/ Pulse Width Modulation Output; 4mA driving strength General General Purpose Input/Output; 4mA driving strength Purpose Input/Output; 4mA driving strength

Pin 69

74 75 76

General Purpose Input/Output; 4mA driving strength/ I2C Master Data; 4mA driving strength General Purpose Input/Output; 4mA driving strength/ I2C Master Clock; 4mA driving strength Pulse Width Modulation Output; 4mA driving strength/ General Purpose Input/Output; 4mA driving strength General Purpose Input/Output; 4mA driving strength/ Pulse Width Modulation Output; 4mA driving strength

77

78

79

ViewSonic Corporation

14

Confidential - Do Not Copy

Q9b-3

Misc. Interface Pin Name BYPASS RST RSTN VCTRL MODE[1:0] Input w/ 5V-Tolerant Input w/ 5V-Tolerant Output Input Pin Type Function For External Bypass Capacitor Chip Reset; High Reset Chip Reset; Low Reset Regulator Control Chip Configuration Input MODE[1:0] 00 DDC Data for Analog Interface; 4mA driving strength/ UART Transmitter/GPIO DDC Clock for Analog Interface/ UART Receiver/GPIO Crystal Crystal Oscillator Input Oscillator Output Xin Xout 32 33 Pin 4 19 22 11 102, 104

DDCA_SDA/ RS232_TX DDCA_SCL/ RS232_RX XIN XOUT Power Pins Pin Name AVDD_ADC AVDD_MPLL AVDD_PLL VDDP

I/O w/ 5V-tolerant Input w/ 5V-Tolerant

65 66

Pin Type 3.3V Power 3.3V Power 3.3V Power 3.3V Power

Function ADC Power MPLL Power PLL Power Digital Output Power

Pin 44, 50, 60 34 52 14, 67, 95, 103, 115

Pin Name VDDC GND

Pin Type 1.8V Power Ground

Function Digital Core Power Ground

Pin 12, 68, 97, 117 13, 38, 41, 47, 96, 116

No Connects Pin Name NC Pin Type Function No connects Pin 1-3, 5-10, 15-18, 36, 37, 39, 40, 42, 43, 45, 46, 48, 49, 80-94, 98-101, 128

INVERTER In order to drive the CCFLs embedded in the panel module, there is a half bridge inverter to convert by the controller. The input 12V up to hundreds of AC voltage output. The inverter is formed by symmetric in order to drive the separate lamp modules. The input stage consists of a PWM controller, half bridge inverter, and switching MOSFET to convert DC input into AC output. The output stage consists of a tuning capacitor, coupling capacitor, transformer, push-pull

ViewSonic Corporation

15

Confidential - Do Not Copy

Q9b-3

MOSFET pair to boost AC output up to hundreds of voltage. And one resister is serial to lamp for output voltage feedback. There are two signal to control the inverter which come from system. Logic "high" level which send to I901 is turn on the inverter. BRI signal control brightness by DC level which was integral from PWM signal. AUDIO General description The TDA7496L is a stereo 2W+2W class AB power amplifier assembled in the @ Powerdip 14+3+3 package, specially designed for high quality sound, TV and Monitor applications. Features of the TDA7496L include linear volume control, Stand-by and mute functions Ipeak Output Peak Current (internally limited) 0.7 0.9 A Vin Input Signal 2.8 Vrms GV Closed Loop Gain Vol Ctrl > 4.5V 28.5 30 31.5 dB GvLine Monitor Out Gain Vol Ctrl > 4.5V; Zload > 30K-1.5 0 1.5 dB AMin VOL Attenuation at Minimum Volume Vol Ctrl < 0.5V 80 dB BW 0.6 MHz ABSOLUTE MAXIMUM RATINGS Symbol Parameter Value Unit VS DC Supply Voltage 26 V VIN Maximum Input Voltage 8 Vpp Ptot Total Power Dissipation (Tcase = 60°C) 6 W Tamb Ambient Operating Temperature 0 to 70 °C Tstg, Tj Storage and Junction Temperature -40 to 150 °C V6 Volume CTRL DC voltage 7 V 0 4 8 12 Area(cm2)

ViewSonic Corporation

16

Confidential - Do Not Copy

Q9b-3

5. Adjustment Procedure
1. Function Test 1.1. Product - 19" LCD Monitor 1.2. Test Equipment - Color Video Signal & Pattern (or PC with SXGA resolution and a sound card) 1.3. Test Condition Before function test and alignment, each LCD Monitor should be run-in and warmed up for at least 30 minutes with the following conditions: (a) In room temperature, (b) With full-white screen, RGB, and Black (c) With cycled display modes, 640*480 (H=43.27kHz, V=85Hz) 800*600 (H=53.7kHz, V=85Hz) 1024*768 (H=68.67kHz, V=85Hz) 1280*1024 (H=79.97kHz, V=75Hz) 1.4. Test Display Modes & Pattern 1.4.1 Compatible Modes Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Timing 640 x 480 @ 60Hz, 31.5kHz 640 x 480 @ 67Hz, 35.0kHz 640 x 480 @ 75Hz, 37.5kHz 720 x 400 @ 70Hz, 31.5kHz 800 x 600 @ 56Hz, 35.1kHz 800 x 600 @ 60Hz, 37.9kHz 800 x 600 @ 75Hz, 46.9kHz 800 x 600 @ 72Hz, 48.1kHz 832 x 624 @ 75Hz, 49.7kHz 1024 x 768 @ 60Hz, 48.4kHz 1024 x 768 @ 70Hz, 56.5kHz 1024 x 768 @ 75Hz, 60.0kHz 1280 x 1024 @ 60Hz, 63.4kHz 1280 x 1024 @ 75Hz, 79.97kHz

1.4.2 Function Test Display Pattern Item Test Content Pattern 1 Frequency & Fine Line Moire Tracking 2 Contrast/Brightness 16 Gray Scale 3 4 5 6 Specification Eliminate visual wavy noise. Remark Figure 1 Figure 2 Figure 3 Figure 4, 5, 6 Figure 7 Figure 7, 8

16 gray levels should be distinguishable. Boundary Horizontal & Horizontal and Vertical position Vertical Thickness of video should be adjustable to be within the screen frame. RGB Color RGB Color Contrast of each R, G, B, color Performance Intensities should be normal. Screen Uniformity Full White Should be compliant with the & Flicker spec. Dead Pixel/Line White Screen & The numbers of dead pixels Dark Screen should be compliant with the spec.

ViewSonic Corporation

17

Confidential - Do Not Copy

Q9b-3

7

White Balance

White & Black Pattern

The screen must have the pure Figure 9 white and black pattern, no other color.

Fine Line Morie Pattern (Figure1)

Gray Scale Pattern (Figure2)

Horizontal & Vertical Thickness Pattern (Figure 3)

R. Color Pattern (Figure 4)

G. Color Pattern (Figure5)

B. Color Pattern (Figure 6)

Full White Patter (Figure 7)

Dark Screen Pattern (Figure 8)

ViewSonic Corporation

18

Confidential - Do Not Copy

Q9b-3

Black-White Pattern (Figure 9)

1.5. Function Test and Alignment Procedure 1.5.1 All Modes Reset You should do "Memory Recall" (Refer to Chapter III-3. Hot Keys for Function Controls) first. This action will allow you to erase all end-user's settings and restore the factory defaults. 1.5.2 Auto Image Adjust Please select and enter "Auto Adjust" function on Main Menu to see if it is workable. The "Auto Adjust" function is aimed to offer a better screen quality by built-in ASIC. For optimum screen quality, the user has to adjust each function manually. 1.5.3 Firmware Test Pattern: Burn In Mode (Refer to Chapter III-3. Hot Keys for Function Controls) - Make sure the F/W is the latest version. 1.5.4 DDC Test Pattern: EDID program - Make sure it can pass test program. 1.5.5 Fine Tune and Sharpness Test Signal: 1280*1024@60Hz Test Pattern: Line Moire Pattern - Check and see if the image has noise and focus performs well. Eliminate visual line bar. - If not, readjust by the following steps: (a) Select and enter "Fine Tune" function on "Image Adjust" to adjust the image to eliminate visual wavy noise. (b) Then, select and enter "Sharpness" function to adjust the clarity and focus of the screen image. 1.5.6 Boundary Test Signal: 1280*1024@60Hz Test Pattern: Horizontal & Vertical Line Thickness Pattern - Check and see if the image boundary is within the screen frame. - If not, readjust by the following steps: (a) Select and enter "Image Adjust" function on OSD Main Menu.

ViewSonic Corporation

19

Confidential - Do Not Copy

Q9b-3

(b) Then, select and enter "H. Size" or "H./V. Position" function to adjust the video boundary to be full scanned and within screen frame. 1.5.7 White Balance A. TIMING: 1280x1024 64KHz/60Hz. B. PATTERN: 5 Blocks. C. LCD MONITOR set to 1280x1024 80K/75Hz BURN IN and warm up over 30 minutes. D. CA110 color analizer at the center of screen and along a perpendicular to the screen at 20cm from the display. E. Power turn off, Press "" and " 2 " and turn on power at the same time after power LED is on, release "" and " 2 " key, Then press " 1 " key go to factory mode. (Fig.1)

(Fig.1)

F.

Adjust Color Temperature: (1) EEPROM INIT (5 BLOCKS): Press "" key move cursor to EEPROM INIT, Press " 2 " key then monitor will INIT ADC value. (2) Press "" key move cursor to "White Balance", Press " 2 " key do white balance adjustment. (3) Press "" key move cursor to "Color Temperature Adjust", Press " 2 " key, Then OSD will display Fig.2

(Fig.2) (4) 9300K verify: move cursor to 9300K Press " 2 " key. Press "", "" key adjust R.G.B value x=0.283 ± 0.02 y=0.298 ± 0.02 Press " 1 "key return to Fig.2

ViewSonic Corporation

20

Confidential - Do Not Copy

Q9b-3

(5) 6500K verify: Repeat (4) press "", "" move cursor to 6500K press " 2 " key x=0.313 ± 0.02 (6) 5400K verify: Repeat (4) press "", "" move cursor to 5400K press " 2 " key x=0.332 ± 0.02 y=0.348 ± 0.02 (7) Press " 1 " key go back to Fig.2, Then press " 1 " key return to Fig.1, Power key OFF/ON quit factory mode. G. Color Temperature Verify: BRIGHTNESS MAX, CONTRAST MAX 9300K: x=0.283 ± 0.02 y=0.298 ± 0.02 6500K: x=0.313 ± 0.02 y=0.329 ± 0.02 5400K: x=0.332 ± 0.02 y=0.348 ± 0.02 H. Luminance Verify: BRIGHTNESS MAX, CONTRAST MAX HSD190ME13A10/A16: Luminance :240(min) HSD190ME13A02 : Luminance: 200(min) 1.5.8 R, G, B, Colors Contrast Test Signal: 1280*1024@60Hz Test Pattern: R, G, B, Color Intensities Pattern and 16 Gray Scale Pattern - Check and see if each color is normal and distinguishable. - If not, please return the unit to repair area. 1.5.9 Screen Uniformity and Flicker Test Signal: 1280*1024@60Hz Test Pattern: Full White Pattern - Check and see if it is in normal condition. 1.5.10 Dead Pixel and Line Test Signal: 1280*1024@60Hz Test Pattern: Dark and White Screen Pattern - Check and see if there are dead pixels on LCD panel with shadow gauge and filter film. - The total numbers and distance of dead pixels should be compliant with the spec. 1.5.11 Mura Test Pattern: White, RGB, Black, & Grey Test Tool: 8% ND Filter - Check if the Mura can pass 8% ND Filter. 1.5.13 Check for Secondary Display Modes Test Signal: Analog: 640*350@70Hz; 640*480@60HZ 720*400@70Hz; 800*600@60HZ/70HZ/75HZ 832*624@75Hz, 1024*768@60HZ/70HZ/75HZ 1280*1024@60/75Hz - Normally when the primary mode 1280*1024@60Hz is well adjusted and compliant with the specification, the secondary display modes will be great possible to be compliant with the spec. But we still have to check with the general test pattern to make sure every secondary is compliant with the specification.

y=0.329 ± 0.02

ViewSonic Corporation

21

Confidential - Do Not Copy

Q9b-3

1.5.14 All Modes Reset After final QC step, we have to erase all saved changes again and restore the factory defaults. You should do "All Mode Reset" again. 1.5.15 Power Off Monitor Turn off the monitor by pressing "Power" button.

2. Firmware Upgrade Procedure When you receive the returned monitor, please check whether the firmware version is the latest. If not, please do the following procedures to upgrade it to the latest version. 2.1. Equipment Needed - Q9/b-3 Monitor - Fixture for Firmware Upgrade - VGA Cable - PC (Personal Computer) - LPT Cable - Firmware Upgrade Program - One additional monitor for checking the program execution

Printer Port

PC

Q9b-3

LPT Cable

VGA Cable

ViewSonic Corporation

22

Confidential - Do Not Copy

Q9b-3

2.2. Setup Procedure 2.2.1 Connect P2 of Fixture with printer port of PC by LPT Cable. 2.2.2 Connect P1 of Fixture with Q9/B-3 Monitor by VGA Cable. 2.2.4 Connect Power Cord to Q9/b-3 Monitor. 2.2.5 Connect PC to the additional monitor. 2.3. ISP Download program procedure 2.3.1 Hardware Connect status:

2.3.2 Down load isp program Step 1: Execute ISP.exe

Step 2: Select device type

button to select the type of the device, It need to be selected Pressing the the Pm25LV512 for this project.

ViewSonic Corporation

23

Confidential - Do Not Copy

Q9b-3

Step 3: Connect device Then press the button to connect device.

connection successful : press the button

to continue;

Step 4: Read file (1)Press the button to enter the read-file page.

ViewSonic Corporation

24

Confidential - Do Not Copy

Q9b-3

(2)Press the button

to select file (*.bin).

Step 5: Run

Pressing the

Button to enter the auto-download page. Press button to download the firmware.

ViewSonic Corporation

25

Confidential - Do Not Copy

Q9b-3

Step 6: Download program finish Pressing the Button to finish the download program procedure.

Trouble shooting: If you find the status like the follow picture. Please check the following item. a. The connecting status between PC and ISP board. b. The connecting status between ISP status and Monitor. Turn off the power of monitor (AC plug off ) and disconnect the D-Sub connector . To connect the D-Sub connector and then turn on the power of monitor.(AC plug on)

If the test result shows "passed," it means the connection is well. If not (failed), it means the connection has problems.Then you need to check the setup procedure or reboot the PC, or simply use another PC to do the firmware upgrade.

ViewSonic Corporation

26

Confidential - Do Not Copy

Q9b-3

3. DDC Key In Procedure Note: 1. Every time after replacing the main board, you have to do the DDC key in. 2. If you find the DDC does not conform to the monitor, you have to do the DDC key in. 3.1. Equipment Needed JT198NP4FD3 Monitor DDC Card PC RS232 cable Barcode Reader VGA Cable

Q9b-3

DDC Card

PC

RS-232 Cable

VGA Cable

Barcode Reader

3.2. Setup Procedure 3.2.1 Connect VGA Card and DDC Card with RS-232 cable.

ViewSonic Corporation

27

Confidential - Do Not Copy

Q9b-3

3.2.2 Barcode Reader connect with keyboard and PC keyboard port.

3.2.3 Connect RS-232 Cable and JT198NP4FD3 with VGA Cable. 3.2.4 Connect Power Cord to JT198NP4FD3 Monitor.

3.3. DDC Key In Procedure 3.3.1 Run DDC.exe 3.3.2 Choose model number and conform the Time then Press "ENTER" key.

3.3.3 When appear the PIC " choose DDC Card", Press ALT+2 Enter DDC 2B test interface.

Choose DDC Card

ViewSonic Corporation

28

Confidential - Do Not Copy

Q9b-3

3.3.4 Press F8 to choose corresponding model.DAT (Q9-3.DAT press "ENTER" key)

(The filename on this picture is a example only, the exact one, please refer to your model.)

3.3.5 Press F9 enter the download interface

ViewSonic Corporation

29

Confidential - Do Not Copy

Q9b-3

3.3.6 Key in the serial number or use the barcode reader to scan the barcode of the monitor, and press "ENTER" key.

3.3.7 The successful picture is as follows. "Compare EDID OK! Press any key to continue".

ViewSonic Corporation

30

Confidential - Do Not Copy

Q9b-3

3.3.8 Let Q9-3 active then see the information in OSD, it shows "Serial NO : PPZ0517A3178" (The Serial NO. provided above is a example only; the exact one, please refer to your monitor.)

3.4. Check Method Use ViewSonic EDID Editor

ViewSonic Corporation

31

Confidential - Do Not Copy

Q9b-3

Connect the Q9-3 Monitor to PC with VGA Cable. Excute the EDID Editor, then Press Ctrl+F5. If the DDC is correct, you can see the information as follow:

(The data on this picture is a example only; the exact one, please refer to your monitor.)

ViewSonic Corporation

32

Confidential - Do Not Copy

Q9b-3

Packing For Shipping And Disassembly Procedure Packing For Shipping 1. Packing Procedure
1.1 Paste protection film to protect the monitor. (Figure 1) 1.2 Put the monitor in the PE bag and seal the bag with tape. (Figure 2/3)

Figure 1

Figure 2

Figure 3 1.3 Put the cushions on the monitor. (Figure 4) 1.4 Place the monitor into the carton and then put all the accessories into the carton. At last, close the carton and seal it with tape. (Figure 5)
1.Power Cord 2.VGA Cable 3.Audio Cable

Figure 4

User's Guide

Figure 5

ViewSonic Corporation

33

Confidential - Do Not Copy

Q9b-3

Disassembly Procedure 1. Disassembly of Stand unit from Monitor
1.1 Remove Dust Cover.

Dust cover

1.2 Remove Stand Unit.

ViewSonic Corporation

34

Confidential - Do Not Copy

Q9b-3

1.3 Unscrew 4 screws to remove Hinge.

2. Disassembly of Front Cover and Rear Cover
2.1 Unscrew two screws that secure Rear Cover to remove Front Cover.

Front Cover

ViewSonic Corporation

35

Confidential - Do Not Copy

Q9b-3

2.2 Unscrew 2 screws to remove Rear Cover.

Rear Cover

3. Disassembly of Main Board, Keypad Board and Panel Unit
3.1 Unscrew 6 screws to remove Shielding Plate.

Shielding Plate

ViewSonic Corporation

36

Confidential - Do Not Copy

Q9b-3

3.2. Unscrew 7 screws and disconnect the wires to remove Main Board.

Main Board

3.3. Lay Panel Unit facedown and unscrew 4 screws on its right and left sides to remove Panel Unit and Keypad Board.

Panel Unit

Panel Bracket

Keypad Board

ViewSonic Corporation

37

Confidential - Do Not Copy

Q9b-3

6. Troubleshooting Flow Chart

START

CHECK MAIN

N 5V OK? CHECK POWER PCB OK? Y N 3.3V OK? CHECK

Y

CHECK AND I104,D130 SUROUND CAP OK?

Y

CHECK I104 3.3V

D807,I801,I801
OK? Y N 1.8V OK? CHECK

I104,SUROUND CAP

SUROUND CAP OK?

Y CHECK
Q107 1.8V SUROUND CAP OK?

D807,I801,I801
OK?

Q107,SUROUND CAP

ViewSonic Corporation

38

Confidential - Do Not Copy

Q9b-3

6.1. NO POWER

POWER STAR

Check 5 V O/P

Check

Check PANEL

I902 T801

P901-P904

PA NE

12 V Check 12 V 0/P C823

Check I901 Q905,Q911 Q907,Q908 Q909,Q910

Y
Check D823 T901 ,T902 D822 5V Check

Check F801 D801 C805

Y
Check 12 V I801 Q801 MAIN PCB

ViewSonic Corporation

39

Confidential - Do Not Copy

Q9b-3

6.2. NO DISPLAY

Power key Work ok

N

Check Keypad

N

Check 5V

N

Check I104

Y Check H V sync N Check I105 N Check P102 N Check I/O cable

Y Check R.G.B DATA N Check I/O cable N Check I105 N Check P102

Y Check X101 N Check
C129,C130

N

Check I105,I104

N

Check
VCC1.8V,3.3v

Y Check I101 HS,VS HWRESET N Check
SCL,SDA

N

Check I104, SCL,SDA

N

Check I107, SCL,SDA

Y
Y Check BACKLITE N Check Q104 N Check P102 WIRE N Check PANEL

ViewSonic Corporation

40

Confidential - Do Not Copy

Q9b-3

6.3. LOSE COLOR

Some bits lost

Lose color R or G or B

Y

Y

N Check I105 I105 OR R-pack soldering

Check P107

N Check

Sign
Sign Cable

Y

N I107 poor soldering Check R104,R105.R106 R108,R109,R110 Check C101,C102 C103,C107 C105,C106

Y

I105 fail or Poor,,soldering

ViewSonic Corporation

41

Confidential - Do Not Copy

Q9b-3

6.4. NO AUDIO

N Check Jack P603 Check Audio cable

N Check 12V TRACE 12 V

Check

N Check I601 Check P601

Check speaker

ViewSonic Corporation

42

Confidential - Do Not Copy

Q9b-3

7. Recommended Spare Parts List
RECOMMENDED SPARE PARTS LIST (Q9b-3)
ViewSonic Model Number: VS11455 Serial No. Prefix: QD8
Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Rev: 1a
ECR/ECN ViewSonic P/N A-00006133 B-00008067 B-00008068 C-00003192 C-00008093 C-00003195 C-00008094 C-00008091 C-00008092 CB-00003009 CB-00005735 DC-00008082 DC-00008083 E-00003479 E-00008049 E-00008050 M-MS-0808-1316 M-MS-0808-1317 P-00008075 P-00008076 P-00008077 P-00008078 PL-00003187 PL-00008023 Ref. P/N 2427130047P 6201-7998344F31 6202-7998344F31 2028553002 2028553002P 2028553102 2028553102P 2603308070 2603407714 2427501191P 2427721841P 2002370048P 2438570036P 2212007901P 2391301098P 2391301099P 2013222536P 2013053000P 2011020070P 2012189500P 2012189600P 2013228805P 2028258702 2028258702P Location P951 Universal number#

Accessories: PC Board Assembly: Cabinets:

Cables: Documentation: Electronic Components: Packing Material:

Plastics:

Description Power Cord (German) 1.83M Main Board Power Supply Board Neck 178 W/Arm Up ABS 94HB Neck 178 W/Arm Up ABS 94HB RoHS Neck 178 W/ Arm Down ABS 94HB Neck 178 W/ Arm Down ABS 94HB RoHS Front Panel Back Cover I/O CABLE Cable - (Ear 3.5 1.8M) Quick Start Guide CD-Rom LCD Panel - HSD190ME13-A02 Speaker (Right) Speaker (Left) POLYETHY BAG POLYETHY BAG Craft Box Foam (Right) Foam (Left) POLYETHY BAG Pedestal (JT198DP) Black Pedestal (JT198DP) Black RoHS

5B01 5B01 5B04 5B04

P961 P962 6P84 6P80 V901 W601 W602 6P75 6P60 6P01 6P20 6P21 6P85 5B08 5B08

Remark 1: Above listed items are examples, supplier can expand the rows to add more necessary items. Remark 2: All revised RSPLs with newly added items or any change made should be highlighted and correlated with the ECN/ECR approved by ViewSonic Corporation. This is to eliminate repeated cross checks of each item between this version and prior versions.

ViewSonic Corporation

43

Confidential - Do Not Copy

Q9b-3

BOM LIST (Q9b-3)
ViewSonic Model Number: VS11455 Rev: 1a Serial No. Prefix: QD8
Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 ViewSonic P/N N/A N/A N/A N/A M-BK-0805-0070 HW-00003031 N/A N/A C-00008093 N/A N/A N/A C-00008094 N/A M-SCW-0824-0812 N/A N/A N/A M-SCW-0824-0812 PL-PD-0714-0113 N/A N/A N/A N/A N/A N/A N/A M-SCW-0824-0285 N/A M-SCW-0824-0811 N/A N/A N/A HW-00003028 P-00008075 N/A N/A N/A N/A M-LB-0813-0530 M-LB-0813-0959 P-00008076 P-00008077 N/A M-MS-0808-1317 M-MS-0808-1316 DC-00008083 DC-00008082 P-00008078 N/A N/A N/A N/A N/A N/A M-SCW-0824-0285 M-SCW-0824-0285 M-SCW-0824-0285 N/A N/A N/A N/A N/A N/A E-C-0404-1815 N/A N/A E-C-0404-1815 E-C-0404-1834 E-C-0404-1424 E-C-0404-1815 E-C-0404-1815 E-C-0404-1838 N/A N/A E-C-0404-1815 E-C-0404-1815 E-C-0404-1834 Ref. P/N 2024273702P 2053756201P 2044268003P 2022267202P 2071869400P 2071872900P 2061254400P 2061254400P 2028553002P 2106656900P 2106656901P 2084740122P 2028553102P 2105251800P 2084730062P 2084740122P 2028258702P 2071973400P 2084730062P 2039819301P 2055690057P 2071979500P 2080002200P 2082630064P 2084730104P 2086240132P 2027258102P 2084730082P 2082630064P 2080003700P 2081440082P 2071678800P 2082630042P 2071874300P 2011020070P 2055670103P 2055690060P 2055690056P 2055613379P 2055617101P 2055613392P 2012189500P 2012189600P 2055170164P 2013053000P 2013222536P 2438570036P 2002370048P 2013228805P 2072253903P 2072261500P 2072261401P 2105251400P 2105251400P 2105251400P 2084730082P 2084730082P 2084730082P 2281447391P 2281447391P 2281447391P 2281447391P 2281447391P 2281447391P 2281410491P 2333347691P 2333347691P 2281410491P 2333647591P 2333610591P 2281410491P 2281410491P 2333610691P 2272122091P 2272122091P 2281410491P 2281410491P 2333647591P Description FRONT BEZEL JT198N ABS 94HB BLACK C LED INDIC.-PWR JT198N/PMMA 94HB FUNCTION KEY VP920/ABS 94HB BLACK C CABI BACK JT198V ABS HB BLACK C-F AUDIO BRACKET,FIX METAL PLATE 1.0MM KENSINGTON BRACKET,FIX JT198QP SECC 0.8T WALL MOUNT SPONGE SPONG BLK 50*20*3.0T SPONGE SPONG BLK 50*20*3.0T NECK 178W/ARM UP ABS 94HB BLACK C HINGE JT198QP -1'~20' HINGE JT198QP 0'~20' H.Y SCREW,BND T+ M4*12 (BND T+) NECK 178W/ARM DOWN ABS 94HB BLACK C SPRING PLATE JT178WP/EMI PLATE SCREW,BND T+ M3X6(BND T+) SCREW,BND T+ M4*12 (BND T+) STAND JT198DP ABS94HB #4001 BLACK METAL FITTG JT198DP SECC 1.0T STAND SCREW,BND T+ M3X6(BND T+) FOOT PAD RUBBER O20*2TMM SQUARE GRAIN LABEL JT198NP4FD3 Q9b STAND INSTALL METAL FITTG JT198V SECC 0.6T F SCREW,SPE L355 M3x6 DH NICKEL-PLATED SCREW M3*6 P=0.5 BLACK SCREW,BND T+ M3X10(BND T+)BLACK SCREW,P SW+ M4*12 PSW+ 2N DUST COVER JT178WP/ABS 94HB BLACK C SCREW,BND T+ M3X8(BND T+) SCREW M3*6 P=0.5 BLACK SCREW,SPE ISZZTER001A M3*6L MSWR17/FZMYI SCREW,(WASH) M4X8 P=0.7(TOOTH WASHER) SHIELD PLATE JT198V SPTE 0.3T F-PHONE SCREW M3*4 P=0.5 BRACKET,FIX SECC T=0.8 VE910 ACINLET CARTON BOX JT198NP4FD3 Q9b VS11455 WW LABEL JT198NP4FD3 Q9b-3 VS11455 (E) LABEL ENERGYSTAR LABEL 11X11MM NO PP LABEL Q9b-3 VS11455 SMALL LABEL LABEL VIEWSONIC CONTAINER LABEL LABEL 10*20 HI-POT TESTED OK LABEL VSC HIGH VOLTAGE WARNING LABEL POLYFOAM JT198N-X,D/EPS (R) POLYFOAM JT198N-X D/EPS (L) LABEL JT198NP4FD3 Q9b VS11455 TCO99 POLYETHY BAG 90CMX75CMX0.02t PE-LD POLYETHY BAG 250mmX350mmX0.3t ADD>PE-LD< CD-OWNER GUIDE Q9b-3 WIZARD CD HSD GUARANT CARD VIEWSONIC Q9b-3 QSG POLYETHY BAG 175X280X0.03T mm LDPE A5 HEAT SINK JT178DP SPTE T=1MM HEAT SINK JT178DP 40L*35W*20H AL T=3 HEAT SINK JT178QP AL6063S-75 30*20*15 SPRING PLATE SPTE T=0.4MM (GROUND PLATE) SPRING PLATE SPTE T=0.4MM (GROUND PLATE) SPRING PLATE SPTE T=0.4MM (GROUND PLATE) SCREW,BND T+ M3X8(BND T+) SCREW,BND T+ M3X8(BND T+) SCREW,BND T+ M3X8(BND T+) CAP CER CC 0.047u/ 50V Y5V P=5.0 Z T CAP CER CC 0.047u/ 50V Y5V P=5.0 Z T CAP CER CC 0.047u/ 50V Y5V P=5.0 Z T CAP CER CC 0.047u/ 50V Y5V P=5.0 Z T CAP CER CC 0.047u/ 50V Y5V P=5.0 Z T CAP CER CC 0.047u/ 50V Y5V P=5.0 Z T CAP CER CC 0.1u/ 50V Y5V P=5.0 Z T CAP ELE 105'C EC 47u/ 16V 5*11 P=5.0 T CAP ELE 105'C EC 47u/ 16V 5*11 P=5.0 T CAP CER CC 0.1u/ 50V Y5V P=5.0 Z T CAP ELE 105'C EC 4.7u/ 50V 5*11 P=5.0 T CAP ELE 105'C EC 1u/ 50V 5*11 P=5.0 T CAP CER CC 0.1u/ 50V Y5V P=5.0 Z T CAP CER CC 0.1u/ 50V Y5V P=5.0 Z T CAP ELE 105'C EC 10u/ 50V 5*11 P=5.0 T CAP CER TC 22p/50V CH P=5.0 J T CAP CER TC 22p/50V CH P=5.0 J T CAP CER CC 0.1u/ 50V Y5V P=5.0 Z T CAP CER CC 0.1u/ 50V Y5V P=5.0 Z T CAP ELE 105'C EC 4.7u/ 50V 5*11 P=5.0 T Location 1F01 1F02 1F03 2C01 2C02 2C03 2C06 2C07 5B01 5B02 5B02 5B03 5B04 5B05 5B06 5B07 5B08 5B09 5B10 5B11 5B12 5F01 5F02 6B01 6B02 6B03 6B04 6B05 6B06 6F01 6F04 6F05 6F06 6F11 6P01 6P02 6P03 6P05 6P11 6P13 6P14 6P20 6P21 6P50 6P60 6P75 6P80 6P84 6P85 9H01 9H02 9H03 9H11 9H12 9H13 9S01 9S02 9S03 C101 C102 C103 C105 C106 C107 C116 C117 C119 C120 C124 C125 C126 C127 C128 C129 C130 C131 C132 C134 Universal number# Q'ty 1 1 1 1 1 1 1 1 1 1 1 4 1 1 1 4 1 1 4 4 1 1 4 4 2 4 1 2 2 6 1 1 3 1 1 1 1 1 25 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

ViewSonic Corporation

44

Confidential - Do Not Copy

Q9b-3

Item 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161

ViewSonic P/N N/A N/A E-C-0404-1815 E-C-0404-1838 E-C-0404-1815 E-C-0404-1119 N/A N/A E-C-0404-1815 N/A E-C-0404-1815 E-C-0404-1838 E-C-0404-1815 E-C-0404-1838 E-C-0404-1815 E-C-0404-1838 N/A N/A N/A E-C-0404-2271 E-C-0404-1815 E-C-0404-1838 N/A N/A E-C-0404-1424 E-C-0404-1424 N/A N/A N/A E-C-0404-1815 N/A E-00005729 E-C-0404-1855 E-C-0404-1855 N/A E-C-0404-2262 N/A E-C-0404-1838 N/A N/A N/A N/A N/A N/A N/A E-C-0404-1838 N/A N/A N/A N/A N/A E-00005730 E-00005730 N/A N/A E-00003555 N/A N/A N/A N/A N/A N/A N/A N/A E-00003555 N/A N/A N/A E-00005730 E-00005730 N/A E-D-0403-0531 N/A N/A E-D-0403-0531 N/A N/A E-D-0403-0531 N/A N/A E-D-0403-0531 N/A N/A

Ref. P/N 2281410401P 2281410401P 2281410491P 2333610691P 2281410491P 2272122191P 2272122091P 2333610601P 2281410491P 2281410401P 2281410491P 2333610691P 2281410491P 2333610691P 2281410491P 2333610691P 2281410401P 2333347691P 2333347691P 2333310791P 2281410491P 2333610691P 2333310812P 2333322691P 2333610591P 2333610591P 2333347791P 2333347791P 2333322791P 2281410491P 2300947401P 2300947481P 2287247212P 2287247212P 2357510708P 2285110291P 2281147191P 2333610691P 2283322291P 2283322291P 2336010811P 2330006491P 2336010801P 2335347773P 2281110491P 2333610691P 2285122191P 2335310841P 2287210300P 2302047391P 2275422001P 2284022291P 2284022291P 2275450901P 2330006491P 2302047291P 2284010391P 2281110491P 2284010391P 2284010391P 2281110491P 2275422001P 2284010291P 2275450901P 2302047291P 2330006491P 2302068391P 2281110491P 2284022291P 2284022291P 2281110491P 2363600195P 2363601795P 2363601895P 2363600195P 2363601795P 2363601895P 2363600195P 2363601795P 2363601895P 2363600195P 2363601795P 2363601895P

Description CAP CER CC 0.1u/ 50V Y5V P=5.0 Z T CAP CER CC 0.1u/ 50V Y5V P=5.0 Z T CAP CER CC 0.1u/ 50V Y5V P=5.0 Z T CAP ELE 105'C EC 10u/ 50V 5*11 P=5.0 T CAP CER CC 0.1u/ 50V Y5V P=5.0 Z T CAP CER TC 220p/50V CH P=5.0 J T CAP CER TC 22p/50V CH P=5.0 J T CAP,ELE 105'C EC 10u/ 50V 5*11 P=2.0 C CAP CER CC 0.1u/ 50V Y5V P=5.0 Z T CAP CER CC 0.1u/ 50V Y5V P=5.0 Z T CAP CER CC 0.1u/ 50V Y5V P=5.0 Z T CAP ELE 105'C EC 10u/ 50V 5*11 P=5.0 T CAP CER CC 0.1u/ 50V Y5V P=5.0 Z T CAP ELE 105'C EC 10u/ 50V 5*11 P=5.0 T CAP CER CC 0.1u/ 50V Y5V P=5.0 Z T CAP ELE 105'C EC 10u/ 50V 5*11 P=5.0 T CAP CER CC 0.1u/ 50V Y5V P=5.0 Z T CAP ELE 105'C EC 47u/ 16V 5*11 P=5.0 T CAP ELE 105'C EC 47u/ 16V 5*11 P=5.0 T CAP ELE 105'C EC 100u/ 16V 6.3*11 P=5.0 T CAP CER CC 0.1u/ 50V Y5V P=5.0 Z T CAP ELE 105'C EC 10u/ 50V 5*11 P=5.0 T CAP ELE 105'C EC 1000u/ 16V10*17 P=5.0 K CAP,ELE 105'C EC 22u/ 16V 5*11 P=5.0 T CAP ELE 105'C EC 1u/ 50V 5*11 P=5.0 T CAP ELE 105'C EC 1u/ 50V 5*11 P=5.0 T CAP ELE 105'C EC 470u/ 16V 10*12.5 P=5.0 T CAP ELE 105'C EC 470u/ 16V 10*12.5 P=5.0 T CAP ELE 105'C EC 220u/ 16V 8*11 P=5.0 T CAP CER CC 0.1u/ 50V Y5V P=5.0 Z T CAP,MTL MINI X2 0.47u/275V P=15.0 M C X CAP MINI X2 0.47u/275V P=15.0 K C CAP CER Y2 4700p/250V Y5V P=10.0 M K CAP CER Y2 4700p/250V Y5V P=10.0 M K EC HI-RIPPLE 105C 400V EC 100u/400V 18*32 P=7.5 S CAP CER CC 1000P/1KV Y5P P=5.0 K T CAP CER CC 470pF/50V P=5.0 K T CAP ELE 105'C EC 10u/ 50V 5*11 P=5.0 T CAP CER 125'C CC 2200p/500V X7R P=5.0 K T CAP CER 125'C CC 2200p/500V X7R P=5.0 K T HI-LIFE LOW ESR ELE CAP EC 1000u/ 16V 10*16 P=5.0 C CAP ELE SPECIAL (3000HR) EC 470u /16V 10*13 P=5.0 T HI-LIFE LOW ESR ELE CAP EC 1000u/ 10V 8*20 P=3.5 C CAP,ELE LOW ESR 105'C (6 000HR) EC 470u/ 16V 10*13 P=5.0 T CAP CER CC 0.1u/50V (Y5P) P=5.0 K T CAP ELE 105'C EC 10u/ 50V 5*11 P=5.0 T CAP CER CC 220P/1KV Y5P P=5.0 K T CAP,ELE LOW ESR 105'C EC 1000u/ 16V 10*16 P=5.0 C CAP CER Y2 0.01uF/250V P=10.0 M CAP,MTL MEF 0.047uF/50V P=5.0 J T CAP CER TC 22P/3KV SL P=7.5 J C CAP CER CC 2200p/50V X7R P=5.0 K T CAP CER CC 2200p/50V X7R P=5.0 K T CAP CER TC 5P/3KV SL P=7.5 J C CAP ELE SPECIAL (3000HR) EC 470u /16V 10*13 P=5.0 T CAP,MTL MEF 4700pF/50V P=5.0 J T CAP CER CC 0.01u/50V X7R P=5.0 K T CAP CER CC 0.1u/50V (Y5P) P=5.0 K T CAP CER CC 0.01u/50V X7R P=5.0 K T CAP CER CC 0.01u/50V X7R P=5.0 K T CAP CER CC 0.1u/50V (Y5P) P=5.0 K T CAP CER TC 22P/3KV SL P=7.5 J C CAP CER CC 1000p/50V X7R P=5.0 K T CAP CER TC 5P/3KV SL P=7.5 J C CAP,MTL MEF 4700pF/50V P=5.0 J T CAP ELE SPECIAL (3000HR) EC 470u /16V 10*13 P=5.0 T CAP,MTL MEF 0.068u/50V P=5.0 J T CAP CER CC 0.1u/50V (Y5P) P=5.0 K T CAP CER CC 2200p/50V X7R P=5.0 K T CAP CER CC 2200p/50V X7R P=5.0 K T CAP CER CC 0.1u/50V (Y5P) P=5.0 K T DIODE,SWITCH 1N4148 DO-35 WILLAS DIODE,SWITCH 1N4148TA_NL DO-35 FAIRCHILD DIODE,SWITCH 1N4148 DO-35 TSC DIODE,SWITCH 1N4148 DO-35 WILLAS DIODE,SWITCH 1N4148TA_NL DO-35 FAIRCHILD DIODE,SWITCH 1N4148 DO-35 TSC DIODE,SWITCH 1N4148 DO-35 WILLAS DIODE,SWITCH 1N4148TA_NL DO-35 FAIRCHILD DIODE,SWITCH 1N4148 DO-35 TSC DIODE,SWITCH 1N4148 DO-35 WILLAS DIODE,SWITCH 1N4148TA_NL DO-35 FAIRCHILD DIODE,SWITCH 1N4148 DO-35 TSC

Location C135 C136 C137 C138 C139 C140 C141 C142 C143 C144 C145 C146 C148 C149 C150 C151 C153 C156 C157 C168 C169 C172 C601 C602 C603 C604 C605 C606 C610 C615 C801 C801 C802 C803 C805 C806 C808 C810 C820 C821 C822 C823 C824 C825 C826 C827 C828 C829 C831 C901 C902 C903 C904 C905 C906 C908 C910 C911 C912 C913 C914 C916 C917 C918 C919 C922 C924 C925 C926 C927 C928 D101 D101 D101 D102 D102 D102 D103 D103 D103 D104 D104 D104

Universal number#

Q'ty 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

ViewSonic Corporation

45

Confidential - Do Not Copy

Q9b-3

Item 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244

ViewSonic P/N E-D-0403-0531 N/A N/A E-D-0403-0531 N/A N/A N/A N/A N/A N/A E-D-0403-0531 N/A N/A E-D-0403-0531 N/A N/A N/A E-D-0403-0531 N/A N/A N/A E-D-0403-1500 E-D-0403-1500 E-D-0403-0531 N/A N/A N/A N/A N/A N/A N/A E-D-0403-1465 N/A N/A N/A N/A N/A N/A N/A N/A N/A E-D-0403-0531 N/A N/A E-D-0403-0531 N/A N/A E-D-0403-0531 N/A N/A E-D-0403-0531 N/A N/A E-D-0403-0531 N/A N/A E-D-0403-0531 N/A N/A E-D-0403-0531 N/A N/A E-D-0403-0531 N/A N/A E-D-0403-0531 N/A N/A E-D-0403-0531 N/A N/A E-D-0403-0531 N/A N/A E-D-0403-0531 N/A N/A E-D-0403-0531 N/A N/A E-D-0403-0531 N/A N/A

Ref. P/N 2363600195P 2363601795P 2363601895P 2363600195P 2363601795P 2363601895P 2363516895P 2363516895P 2363516895P 2363516895P 2363600195P 2363601795P 2363601895P 2363600195P 2363601795P 2363601895P 2363516895P 2363600195P 2363601795P 2363601895P 2428106125P 2363222195P 2363222195P 2363600195P 2363601795P 2363601895P 2363703808P 2368501800P 2368502800P 2363231995P 2363234995P 2363220395P 2363235195P 2363303900P 2363303700P 2363303300P 2363300212P 2363234012P 2363300212P 2363234012P 2428106075P 2363600195P 2363601795P 2363601895P 2363600195P 2363601795P 2363601895P 2363600195P 2363601795P 2363601895P 2363600195P 2363601795P 2363601895P 2363600195P 2363601795P 2363601895P 2363600195P 2363601795P 2363601895P 2363600195P 2363601795P 2363601895P 2363600195P 2363601795P 2363601895P 2363600195P 2363601795P 2363601895P 2363600195P 2363601795P 2363601895P 2363600195P 2363601795P 2363601895P 2363600195P 2363601795P 2363601895P 2363600195P 2363601795P 2363601895P 2363600195P 2363601795P 2363601895P

Description DIODE,SWITCH 1N4148 DO-35 WILLAS DIODE,SWITCH 1N4148TA_NL DO-35 FAIRCHILD DIODE,SWITCH 1N4148 DO-35 TSC DIODE,SWITCH 1N4148 DO-35 WILLAS DIODE,SWITCH 1N4148TA_NL DO-35 FAIRCHILD DIODE,SWITCH 1N4148 DO-35 TSC DIODE,ZENER HZ6B-2 5.6-5.9V DO-35 HITACHI DIODE,ZENER HZ6B-2 5.6-5.9V DO-35 HITACHI DIODE,ZENER HZ6B-2 5.6-5.9V DO-35 HITACHI DIODE,ZENER HZ6B-2 5.6-5.9V DO-35 HITACHI DIODE,SWITCH 1N4148 DO-35 WILLAS DIODE,SWITCH 1N4148TA_NL DO-35 FAIRCHILD DIODE,SWITCH 1N4148 DO-35 TSC DIODE,SWITCH 1N4148 DO-35 WILLAS DIODE,SWITCH 1N4148TA_NL DO-35 FAIRCHILD DIODE,SWITCH 1N4148 DO-35 TSC DIODE,ZENER HZ6B-2 5.6-5.9V DO-35 HITACHI DIODE,SWITCH 1N4148 DO-35 WILLAS DIODE,SWITCH 1N4148TA_NL DO-35 FAIRCHILD DIODE,SWITCH 1N4148 DO-35 TSC JUMPER 0.6*12.5mm DIODE,RECT SB140 DO-41 PEC DIODE,RECT SB140 DO-41 PEC DIODE,SWITCH 1N4148 DO-35 WILLAS DIODE,SWITCH 1N4148TA_NL DO-35 FAIRCHILD DIODE,SWITCH 1N4148 DO-35 TSC LED 3 GRN/YEL H=7.5mm RECT,BRIDGE 2KBP06M 600V/2A PEC RECT,BRIDGE 2KBP06M(LF) 600V/2A MOSPEC DIODE,RECT UF4007 DO-41 1000V/1A PEC DIODE,RECT UF4007 DO-41 MOSPEC DIODE,RECT UF4004G DO-41 PEC DIODE,RECT UPG10G DO-204AL ZOWIE DIODE,SCHOTTKY GMR10H125C TO-220AB GAMMA DIODE,SCHOTTKY GMR10H100C TO-220AB GAMMA DIODE,SCHOTTKY FCH10U10 TO-220AB NI DIODE,SCHOTTKY 31DQ06FC 60V/1.6A H=21.4 NI DIODE,RECT SR306(LF) DO-201AD MOSPEC DIODE,SCHOTTKY 31DQ06FC 60V/1.6A H=21.4 NI DIODE,RECT SR306(LF) DO-201AD MOSPEC JUMPER 0.6*7.5mm DIODE,SWITCH 1N4148 DO-35 WILLAS DIODE,SWITCH 1N4148TA_NL DO-35 FAIRCHILD DIODE,SWITCH 1N4148 DO-35 TSC DIODE,SWITCH 1N4148 DO-35 WILLAS DIODE,SWITCH 1N4148TA_NL DO-35 FAIRCHILD DIODE,SWITCH 1N4148 DO-35 TSC DIODE,SWITCH 1N4148 DO-35 WILLAS DIODE,SWITCH 1N4148TA_NL DO-35 FAIRCHILD DIODE,SWITCH 1N4148 DO-35 TSC DIODE,SWITCH 1N4148 DO-35 WILLAS DIODE,SWITCH 1N4148TA_NL DO-35 FAIRCHILD DIODE,SWITCH 1N4148 DO-35 TSC DIODE,SWITCH 1N4148 DO-35 WILLAS DIODE,SWITCH 1N4148TA_NL DO-35 FAIRCHILD DIODE,SWITCH 1N4148 DO-35 TSC DIODE,SWITCH 1N4148 DO-35 WILLAS DIODE,SWITCH 1N4148TA_NL DO-35 FAIRCHILD DIODE,SWITCH 1N4148 DO-35 TSC DIODE,SWITCH 1N4148 DO-35 WILLAS DIODE,SWITCH 1N4148TA_NL DO-35 FAIRCHILD DIODE,SWITCH 1N4148 DO-35 TSC DIODE,SWITCH 1N4148 DO-35 WILLAS DIODE,SWITCH 1N4148TA_NL DO-35 FAIRCHILD DIODE,SWITCH 1N4148 DO-35 TSC DIODE,SWITCH 1N4148 DO-35 WILLAS DIODE,SWITCH 1N4148TA_NL DO-35 FAIRCHILD DIODE,SWITCH 1N4148 DO-35 TSC DIODE,SWITCH 1N4148 DO-35 WILLAS DIODE,SWITCH 1N4148TA_NL DO-35 FAIRCHILD DIODE,SWITCH 1N4148 DO-35 TSC DIODE,SWITCH 1N4148 DO-35 WILLAS DIODE,SWITCH 1N4148TA_NL DO-35 FAIRCHILD DIODE,SWITCH 1N4148 DO-35 TSC DIODE,SWITCH 1N4148 DO-35 WILLAS DIODE,SWITCH 1N4148TA_NL DO-35 FAIRCHILD DIODE,SWITCH 1N4148 DO-35 TSC DIODE,SWITCH 1N4148 DO-35 WILLAS DIODE,SWITCH 1N4148TA_NL DO-35 FAIRCHILD DIODE,SWITCH 1N4148 DO-35 TSC DIODE,SWITCH 1N4148 DO-35 WILLAS DIODE,SWITCH 1N4148TA_NL DO-35 FAIRCHILD DIODE,SWITCH 1N4148 DO-35 TSC

Location D105 D105 D105 D106 D106 D106 D107 D108 D110 D111 D124 D124 D124 D125 D125 D125 D126 D127 D127 D127 D128 D129 D130 D601 D601 D601 D701 D801 D801 D806 D806 D807 D807 D821 D821 D821 D822 D822 D823 D823 D901 D902 D902 D902 D905 D905 D905 D906 D906 D906 D907 D907 D907 D908 D908 D908 D909 D909 D909 D910 D910 D910 D911 D911 D911 D912 D912 D912 D913 D913 D913 D915 D915 D915 D916 D916 D916 D917 D917 D917 D918 D918 D918

Universal number#

Q'ty 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

ViewSonic Corporation

46

Confidential - Do Not Copy

Q9b-3

Item 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325

ViewSonic P/N E-D-0403-0531 N/A N/A E-FS-0410-0009 N/A M-WR-0828-0460 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A E-PC-0411-0083 E-00005306 N/A E-IC-0401-1270 E-IC-0401-2152 N/A N/A N/A N/A N/A N/A N/A n/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A M-WR-0828-0455 M-WR-0828-0455 M-WR-0828-0455 M-WR-0828-0455 M-WR-0828-0455 N/A M-WR-0828-0455 M-WR-0828-0455 N/A M-WR-0828-0455 N/A N/A M-WR-0828-0455 N/A N/A N/A N/A N/A N/A N/A N/A M-WR-0828-0455 N/A N/A N/A N/A N/A N/A M-WR-0828-0455 N/A N/A N/A N/A N/A N/A N/A M-WR-0828-0455 N/A N/A N/A N/A

Ref. P/N 2363600195P 2363601795P 2363601895P 2213125207P 2213125211P 2428106125P 2365335010P 2365335060P 2365425216P 2365106196P 2365106696P 2365915896P 2365100996P 2365106396P 2365335280P 2365329700P 2365335266P 2362401800P 2362402300P 2365328191P 2365319391P 2365321991P 2365327691P 2365335236P 2428106250P 2428106250P 2428106075P 2428106075P 2428106100P 2428106125P 2428106075P 2428208125P 2428106075P 2428106125P 2428106100P 2428208100P 2428208200P 2428208050P 2428106075P 2428106075P 2428106050P 2428106050P 2428106050P 2428106050P 2428106050P 2428208050P 2428106050P 2428106050P 2428106075P 2428106050P 2428106075P 2428106075P 2428106050P 2428106100P 2428106100P 2428106075P 2428106100P 2428106125P 2428106075P 2428106075P 2428106075P 2428106050P 2428106150P 2428106075P 2428106100P 2428106075P 2428106075P 2428106075P 2428106050P 2428106075P 2428106075P 2428106075P 2428106075P 2428106075P 2428106075P 2428106075P 2428106050P 2428106075P 2428106100P 2233422095P 2233422095P

Description DIODE,SWITCH 1N4148 DO-35 WILLAS DIODE,SWITCH 1N4148TA_NL DO-35 FAIRCHILD DIODE,SWITCH 1N4148 DO-35 TSC FUSE 21502.5(2.5A) LITTEL FUSE FUSE 2.5A/250V SG501302.5 PICO JUMPER 0.6*12.5mm LINEAR IC AP1084T33L TO-220 Anachip LINEAR IC AIC1084-33PT TO-220 AIC DIGITAL IC TSUM16AK-LF PQFP-128 Mstar MEMORY IC (FLASH) PM25LV512SCE SO-8 PMC MEMORY IC (FLASH) PS25LV512-33SCE SOIC-8 Mstar IC,DIGITAL SMD 24LC16BT/SN SO-8 MICROCHIP MEMORY IC AT24C16AN-10SU-2.7 SO-8 AMTEL MEMORY IC (EEPROM) M24C16-WMN6TP SO-8 ST LINEAR IC GMA7496L-D20 DIP-20 GAMMA LINEAR IC TDA7496L DIP-20 ST LINEAR IC LD7575PS SOP-8 Leadtrend PHOTO COUPLR TLP621 TOSHIBA PHOTO COUPLR TLP421 DIP4 TOSHIBA LINEAR IC AP431VLA TO-92 ATC LINEAR IC TL431CLPRE3 TO-92 TI LINEAR IC KA431AZTA TO-92 FAIRCHILD LINEAR IC CM431GDCN TO-92 CHAMPION LINEAR IC OZ9936GN SOIC-8 O2-MICRO JUMPER 0.625.00MM JUMPER 0.625.00MM JUMPER 0.6*7.5mm JUMPER 0.6*7.5mm JUMPER 0.6*10.0mm JUMPER 0.6*12.5mm JUMPER 0.6*7.5mm WIRE,STRIP 0.8*12.5mm JUMPER 0.6*7.5mm JUMPER 0.6*12.5mm JUMPER 0.6*10.0mm WIRE,STRIP 0.8*10.0mm WIRE,STRIP 0.8*20.0mm WIRE,STRIP 0.8*5.0mm JUMPER 0.6*7.5mm JUMPER 0.6*7.5mm JUMPER 0.6*5.0mm JUMPER 0.6*5.0mm JUMPER 0.6*5.0mm JUMPER 0.6*5.0mm JUMPER 0.6*5.0mm WIRE,STRIP 0.8*5.0mm JUMPER 0.6*5.0mm JUMPER 0.6*5.0mm JUMPER 0.6*7.5mm JUMPER 0.6*5.0mm JUMPER 0.6*7.5mm JUMPER 0.6*7.5mm JUMPER 0.6*5.0mm JUMPER 0.6*10.0mm JUMPER 0.6*10.0mm JUMPER 0.6*7.5mm JUMPER 0.6*10.0mm JUMPER 0.6*12.5mm JUMPER 0.6*7.5mm JUMPER 0.6*7.5mm JUMPER 0.6*7.5mm JUMPER 0.6*5.0mm JUMPER 0.6*15.0mm JUMPER 0.6*7.5mm JUMPER 0.6*10.0mm JUMPER 0.6*7.5mm JUMPER 0.6*7.5mm JUMPER 0.6*7.5mm JUMPER 0.6*5.0mm JUMPER 0.6*7.5mm JUMPER 0.6*7.5mm JUMPER 0.6*7.5mm JUMPER 0.6*7.5mm JUMPER 0.6*7.5mm JUMPER 0.6*7.5mm JUMPER 0.6*7.5mm JUMPER 0.6*5.0mm JUMPER 0.6*7.5mm JUMPER 0.6*10.0mm RES,CBN 1/4 S RD 1/4WS 22 ohm J T52 RES,CBN 1/4 S RD 1/4WS 22 ohm J T52

Location D919 D919 D919 F801 F801 F802 I104 I104 I105 I106 RA I106 RB I107 RA I107 RB I107 RC I601 I601 I801 I802 I802 I803 I803 I803 I803 I901 J102 J103 J104 J105 J106 J107 J108 J109 J110 J111 J112 J113 J114 J115 J116 J117 J118 J119 J120 J121 J122 J123 J124 J125 J126 J127 J128 J129 J130 J131 J132 J133 J134 J135 J136 J137 J138 J139 J140 J141 J142 J601 J602 J603 J604 J805 J806 J807 J808 J809 J901 J902 J903 J904 J905 J906 J907

Universal number#

Q'ty 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

ViewSonic Corporation

47

Confidential - Do Not Copy

Q9b-3

Item 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407

ViewSonic P/N N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A E-L-0407-0013 E-L-0407-0013 E-L-0407-0013 E-L-0407-0013 E-L-0407-0013 E-L-0407-0013 E-L-0407-0013 E-L-0407-0013 E-L-0407-0013 E-L-0407-0013 E-L-0407-0013 E-L-0407-0013 E-L-0407-0041 E-L-0407-0013 N/A N/A N/A N/A E-L-0407-1606 N/A M-WR-0828-0455 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A A-00006133 CB-00003009 CB-00005735 N/A N/A CB-00005400 M-00003554 M-00003554 M-00003554 E-Q-0402-1624 E-Q-0402-1180 E-Q-0402-1608 N/A N/A N/A E-00003851 E-Q-0402-1106 E-Q-0402-0720 E-Q-0402-1106 E-Q-0402-0720 E-Q-0402-0718 E-Q-0402-0428 N/A E-00004445 E-Q-0402-0718 E-Q-0402-0555 E-Q-0402-0428 E-Q-0402-0718 E-Q-0402-0555 E-Q-0402-0428 N/A E-00005732 E-Q-0402-0718 E-Q-0402-0555 E-Q-0402-0428 E-Q-0402-0718 E-Q-0402-0555 E-Q-0402-0428 N/A

Ref. P/N 2428106200P 2428106150P 2428106175P 2428106075P 2428106075P 2428106075P 2434325603P 2434325603P 2434325603P 2428106125P 2428106125P 2379101495P 2379101495P 2379101495P 2379101495P 2379101495P 2379101495P 2379101495P 2379101495P 2379101495P 2379101495P 2379101495P 2379101495P 2379101595P 2379101495P 2371150903P 2371150903P 2371160302P 2371160301P 2379103500P 2379104400P 2428106050P 2428106125P 2404371012P 2404371007P 2404321230P 2404300003P 2405106000P 2427408016P 2404380302P 2404380302P 2404380302P 2404380302P 2427130047P 2427501191P 2427721841P 2420330151P 2427309040P 2427404011P 2097400301P 2097400301P 2097400301P 2360301696P 2360301296P 2360300896P 2360501396P 2360502196P 2360302296P 2360302496P 2361100491P 2361111491P 2361100491P 2361111491P 2361316191P 2361302591P 2361610900P 2361611200P 2361316191P 2361313691P 2361302591P 2361316191P 2361313691P 2361302591P 2360609596P 2360609696P 2361316191P 2361313691P 2361302591P 2361316191P 2361313691P 2361302591P 2361609891P

Description JUMPER 0.6*20mm JUMPER 0.6*15.0mm JUMPER 0.6*17.5mm JUMPER 0.6*7.5mm JUMPER 0.6*7.5mm JUMPER 0.6*7.5mm SHIELDING TAPE W25*L60mm (AL) SHIELDING TAPE W25*L60mm (AL) SHIELDING TAPE W25*L60mm (AL) JUMPER 0.6*12.5mm JUMPER 0.6*12.5mm FERRITE CORE 3.5*9*0.8 FERRITE CORE 3.5*9*0.8 FERRITE CORE 3.5*9*0.8 FERRITE CORE 3.5*9*0.8 FERRITE CORE 3.5*9*0.8 FERRITE CORE 3.5*9*0.8 FERRITE CORE 3.5*9*0.8 FERRITE CORE 3.5*9*0.8 FERRITE CORE 3.5*9*0.8 FERRITE CORE 3.5*9*0.8 FERRITE CORE 3.5*9*0.8 FERRITE CORE