Text preview for : 2170 Security.txt part of nokia,alkatel,simens all secret cod for all mobil factur



Back to : Secret Codes.rar | Home

(170-2213/4) Security

The 170-2213 and the 170-2214 are both the same telephone. The only
difference is where they are sold.

Security Code

Your phone will prompt you for a five-digit security code to enter certain
features. The factory default code is 12345, and that is what your phone
will accept until it is changed.

If your service provider hasn't already changed your security code, it's
recommended you have it changed immediately. See "To change your security
code (Menu 5 3)" below.

Note: When entering your security code, ** will appear on the display
to keep others from viewing your code.

If you make a mistake entering the code,

Erase the incorrect digit by pressing CLR or press and hold CLR to exit
the current function.

What if you enter the wrong security code?

You can still enter it again. But if you enter the wrong security code
five times in a row, your phone will activate a security timer.

If this happens, your phone will not accept a security code for about five
minutes, even if you enter the correct one. You can still use your phone,
but any attempts to enter the security code will reset the timer.

Once the timer has elapsed, you may re-enter the correct security code to
access security code protected features.

Note: Your phone must remain on during the five minute security timer or
the timer will reset for another five minutes.

Menu 5 1, Automatic Phone Lock

When this feature is activated, your phone will be locked every time you
switch on your phone. You must enter a four-digit lock code to unlock
your phone. Without entering your lock code, you'll be denied access to
almost every memory and menu function.

When your phone is locked, your phone will only receive incoming calls and
make outgoing calls to the phone numbers stored in memory locations 2, 3,
and 4.

If your phone is locked and you switch your phone off and back on again,
you must enter the lock code.

Note: When your phone is locked, calls may be possible to the emergency
number programmed into your phone (e.g. 911 or other official
emergency number) including calls with Emergency Key 9.

To enter the lock code

At Enter lock code: enter the lock code and press OK.

Note: Your security code can be entered in place of the lock code when
you are asked to enter the lock code.

To answer a call with Auto Lock on

Press TALK.

Can you make calls with Auto Lock on?

Yes. You can call numbers that are stored in memory locations 2, 3, and
4, which are unlocked. To make full use of this feature, you may wish to
store your most frequently-dialed numbers in these locations.

To call unlocked memory locations while Auto Lock is on

There are four different ways you can do this:

1. Press and hold CLR to go to the start screen. Press / or / to
desired unlocked location, then press TALK.

2. Enter number as it is stored and press TALK.

3. Press desired unlocked location (either 2, 3, or 4) and press TALK.

4. Press and hold the desired unlocked location.

To turn Auto Lock off

Use Menu 5 1 and your lock code.

To change your lock code (Menu 5 2)

You can change your lock code with your phone's menu. Your default code
is set to the last 4 digits of your phone number. In a lock code, only
characters 0 to 9 * and # are accepted.

Changing the lock code is simple. Just press Menu 5 2 and follow the
prompts to do this. Make sure you have your security code handy. You'll
need it to change the lock code.

Note: Avoid entering access codes similar to emergency numbers to prevent
accidental emergency calls.

To change your security code (Menu 5 3)

The default security code for your phone is 12345. It's recommended that
you change this code immediately. Just press Menu 5 3 and follow the
prompts to do this, and make sure you write the new code down and store it
away from your phone.

Menu 5 4, Restrict Calls

This feature allows you to restrict outgoing calls from your phone. You
can select the level of restrictions through a series of menu choices.

Menu 5 4 1, Restrict outgoing calls

Allowed means that all calls can be made as usual.

Blocked means that no calls can be made.

Limited means that calls can be made only to phone numbers stored in
certain memory locations.

When restricting outgoing calls by selecting Limited, you are prompted for
an Allow from location: and To location: value. for example, at Allow
from location: enter 1 and To location: enter 15, to allow only calls to
the numbers stored in locations 1-15.

Note: When calls are restricted, calls may be possible to the emergency
number programmed into your phone (e.g. 911 or other official
emergency numbers). However, Emergency Key 9 may not operate
depending on the type of restriction you choose.

The default setting for this feature is Allowed.

Menu 5 4 2, Restrict international calls

Allowed means you can make international calls and Blocked means you
cannot.

The default setting for this feature Allowed.

Menu 5 5, Hide Memory

This feature will prevent your phone from displaying the phone number
stored in your personal directory.

To hide numbers in memory

Use Menu 5 5. You'll need your security code to do this.

To hide only one location, enter the location number at both the Hide from
location: and To location: prompts.

To hide a series of locations, such as locations 10-15, enter the first
location, for example 10, at Hide from location: and the last location,
for example 15, at To location:

Temporary Lists & Call Timers

Your phone automatically stores the last ten numbers you've dialed,
numbers of the last ten calls you've answered, and the numbers of the last
ten calls you missed. It also gives you ten temporary storage places in a
"notepad."

Note: Your phone displays the phone numbers of received and missed calls
only if you have subscribed to Caller ID and the wireless system is
able to identify the caller.

Menu 01 1, Dialed Numbers

Press and hold CLR to go to the start screen.

Press TALK, then quickly press / or / to scroll the list.

If you want to call any of the other numbers in the list, press TALK while
that number is displayed.

To call the first number that appears on your screen, simply wait a few
seconds and your phone will dial it automatically.

The top right corner of the display shows the location number of the last
dialed number (L0 - L9). Menu 01 1 also accesses the Dialed Numbers list.

Menu 01 2, Answered Calls

Press and hold CLR to go to the start screen.

Press * then / or / to scroll the list.

This shows the calling phone numbers of the ten most recent calls you've
answered. If the number listed is stored in your personal directory,
press ABC to view associated names. Also, you can press Menu 01 2 to
access this list.

Menu 01 3, Missed Calls

When you miss a phone call, your phone will display 1 MISSED CALL. Simply
press List to view the number. If you wish to view the number later,
press Quit.

You can view the number later by using the following step.

Press and hold CLR to go to the start screen.

Quickly press * twice (a + will appear on the display), then press / or
/ to scroll the list.

This shows you the calling phone numbers of the 10 most recent calls
you've missed. Menu 013 also accesses the Missed Calls list.

Notepad

Use the Notepad to store names and numbers that you don't want stored in
your personal directory. The Notepad holds up to 10 names and numbers.

To store numbers and names in notepad

1. Enter name and number as you normally would, but at STORE IN LOCATION,
press #.

2. Press OK.

See "Your Personal Directory" in Faxback Doc. # 48319 for details on
storing numbers.

To see numbers and names in notepad

Press and hold CLR to go to the start screen.

Press #, then / or /.

The top right corner of the display shows the location number of the
notepad (0 degrees - 9 degrees).

To clear temporary lists and notepad

Press Menu 01 4.

This clears Dialed Numbers, Answered Calls, Missed Calls, and the notepad.
You cannot undo this operation, so be careful!

Menu 01 7, Call Timers

This feature is for those of you who want to keep track of calls for
billing purposes. Your phone has separate call timers for each phone
number (NAM) your phone uses. This shows call durations for the NAM that
is currently selected.

Use Menu 01 7 and press / repeatedly to show durations of LAST CALL. ALL
CALLS, HOME AREA CALLS, ROAMING CALLS & LIFE TIMER.

Note: The actual time invoiced for calls by your service provider may
vary, depending upon network features, rounding off for billing,
and so forth.

To clear Call Timers

Use Menu 01 7 6 to clear all call timers. You must enter the security
code to clear all call timers. Note that the Life Timer, which is a
running total of all calls made and received with your phone, cannot be
reset.