Text preview for : RF-HD3035UserManual_ENG.pdf part of Philips MMS 460/00 5.1 Multimedia Speaker system
Back to : RF-HD3035UserManual_ENG.p | Home
USB 3.0 3.5" SATA Hard Disk Drive Enclosure
RF-HD3035
User Guide
USB 3.0 3.5" SATA Hard Disk Drive Enclosure
Contents
Introduction ............................................................................................................3 Safety information ................................................................................................3 Important safety instructions .................................................................3 Features.....................................................................................................................3 Package contents ........................................................................................3 System requirements .................................................................................3 Setting up your hard drive enclosure ............................................................4 Installing your hard drive in the enclosure ........................................4 Connecting the enclosure to your computer....................................5 Installing the software...............................................................................8 Using your enclosure ...........................................................................................9 Backing up your files............................................................................................9 Starting Roxio Back On Track ..................................................................9 Selecting files to back up....................................................................... 10 Creating a new Backup Files project ................................................. 11 Using the Backup Files scheduler....................................................... 12 Backup Files options................................................................................ 13 Restoring files ............................................................................................ 14 Disconnecting the enclosure from your computer ............................... 14 Uninstalling the backup software ...................................................... 14 Troubleshooting ................................................................................................. 15 Specifications....................................................................................................... 15 Legal notices ........................................................................................................ 15 One-year limited warranty.............................................................................. 17
2
Introduction
Congratulations on the purchase of your new Rocketfish RF-HD3035 external hard drive enclosure kit. The USB 3.0 Rocketfish 3.5" SATA hard drive enclosure lets you install a high-speed SATA hard drive and connect it to a computer via a USB 3.0 port. The enclosure has a built-in USB 2.0 hub and a memory card reader. SuperSpeed USB 3.0 transfers data at 5 gigabits per second. That's up to 10 times faster than USB 2.0. The performance may vary, based on your system configuration.
· Use only the accessories provided in the accessory package. · Before you install or use the device, read the user manual and assemble the enclosure carefully. · To prevent short circuits, do not leave any metal objects inside the enclosure when installing the hard drive. · To prevent short circuits, do not use the device close to water, rain, or high humidity.
Features
· Multi-function storage solution for your computer. · Supports up to 2 TB 3.5" SATA interface hard drive. · Provides a two-slot USB 3.0 card reader that supports SDXC, SDHC, SD, MMC, MS, MS PRO, xD, Compact Flash (UDMA, Type I / II), and IBM Microdrive. · Provides two external USB 3.0 downstream ports. · Can stand up or lie down while operating. · One-button backup to easily backup, restore, and synchronize data between your Windows PC and the enclosure. · Has one power-on LED, with backup active indicator. · Metal design facilitates rapid heat dissipation. · Supports Plug-and-Play and is hot-swappable.
Safety information
Warning: To reduce the risk of fire or electric shock, do not expose this device to rain or moisture.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your hard drive enclosure. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your hard drive enclosure.
Important safety instructions
· This device is to be used in temperatures of 41~95°F (5~35°C). Temperatures exceeding these limits may damage your hard drive or the enclosure. Avoid heat sources or direct sunlight. · This device can be stored in a humidity range of between 10% and 90%, and can be operated in a humidity range of between 5% and 80%. · Do not connect the device to your computer without taking precautions to avoid electrostatic discharge or short circuits, which could damage the device or your computer. · Do not place this device close to a source of strong magnetic fields (such as a computer screen, TV, radio, or speaker). Strong magnetic fields can affect the reliability of data transfer to and from the device. · Do not place anything heavy on top of the device.
Package contents
· · · · · · · USB 3.0 3.5" SATA hard drive enclosure USB 3.0 A-B cable AC power adapter Utility CD (User Guide and software) Quick setup guide Stand Accessories · Plastic brackets (2) · Screws and screwdriver · Rubber pads (4)
System requirements
· One formatted 3.5" SATA hard drive. · PC or Macintosh computer with an available USB 3.0 port. (You can connect to a USB 2.0 port, but it will only run at USB 2.0 speeds).
RF-HD3035
3
· Supports Microsoft Windows XP, Windows Vista, and Windows 7 operating systems. · Supports MAC OS X version 10.4 or higher operating system (USB 2.0 only). For highest performance and reliability, install the latest updates and service pack (SP). For Windows, go to the Start menu and select Windows Update.
Back
Power button
Physical description
USB 3.0 port
12V DC in port
Status indicators
The following table describes the power-on and backup active LED.
Front
LED indicator Backup button
LED status Solid Flashing Off Solid Flashing Off
Backup button Card reader access LED CF/MD SD/MMC/MS/MS PRO/xD
Card reader
Description The hard drive is turned on. Data is being transmitted between your computer and the hard drive. The hard drive is turned off. A memory card is in the reader. Data is being transmitted between your computer and the memory card. The memory card reader slot is empty.
USB 3.0 hub port
Setting up your hard drive enclosure
Installing your hard drive in the enclosure
Read the safety precautions before you install your hard drive in the enclosure: · Use only the accessories provided in the accessory package. · Always unplug the AC adapter before installing the hard drive. · Do not use a power supply with a different voltage rating.
USB 3.0 hub port
4
· Make sure that you first touch an unpainted, grounded metal object to discharge any static electricity stored on your clothing or body before touching any electronic components. · Handle the printed circuit board (PCB) edges only. Avoid touching the onboard electronic components.
4 Replace the top cover (make sure to place it in
the correct direction), then secure it with the four screws that you previously removed.
To install your hard drive in the enclosure:
1 Remove the four (4) screws from the bottom of
the enclosure, then open the top cover plate.
2 Insert the plastic braces (2) into the holes on
both sides of the hard drive.
5 Attach the four rubber pads to the back of the
enclosure to protect the surface.
Connecting the enclosure to your computer
Notes: Make sure that you have already installed a hard drive into the enclosure before you connect your enclosure to your computer. For new hard drives, you need to initialize and partition your hard drive before it will appear in Windows Explorer or on your Mac desktop. Refer to your hard drive manufacturer's documentation or see "Creating A New Partition" on page 6. For optimal performance, make sure that your laptop or PC has USB 3.0 ports. If your computer does not have USB 3.0 capability, you can plug the USB 3.0 cable into any available USB 2.0 port.
3 Slide the drive into the enclosure, then firmly
connect the drive to the SATA connector.
To connect the enclosure to your computer:
1 Plug the power cord into the enclosure, then
plug the AC power adapter into an AC power outlet.
RF-HD3035
5
2 Plug the USB 3.0 B type connector into the USB
port on the enclosure, then plug the USB 3.0 A type connector into an available USB 3.0 port on your computer.
Creating a new partition in Windows XP/Vista/7
To create a new partition in Windows XP/Vista/7:
1 Right click My Computer, then click Manage. 2 Select Disk Management under Storage on the
USB 3.0 A-type connector
USB 3.0 B-type connector
3 Press the Power button on the enclosure. The
operating system automatically detects and sets up the new drive. If the drive is correctly detected, a new drive letter is assigned to the enclosure. · For Macintosh computers, the new drive letter appears on the desktop. · For PCs, the Safely Remove Hardware icon appears on your taskbar.
left pane. Windows should now give you the option to initialize the disk. If not, locate the new drive, right click on the new disk (where it says "New Simple Volume") and choose Initialize.(This step may not be required for some hard drives) 3 Follow the prompts in the wizard. 4 Once complete, locate your hard drive in the bottom right pane. Right-click on the area with a status bar (to the right of the "New Simple Volume" area) and click New Partition. 5 Continue following the directions of the wizard. The recommended partition type is "primary" and the recommended file system is "NTFS." Note that Windows XP limits FAT32 partitions to only 32 GB. You should now be able to see the drive in Windows Explorer.
Formatting the hard drive in Windows
To format the hard drive using Windows:
Note: Formatting is only required for a new hard drive. Do not format a drive that contains valuable data that you want to save. 1 Click Start, then click Control Panel. 2 Click Performance and Maintenance (in Windows 7
Note for Windows users: If you do not see an additional drive in your system, you must format the new drive. See Windows online help for more information. Notes for Macintosh users: Select Disk Utilities from the Utilities folder, then select the external enclosure and format the drive to meet your requirements.
3
4
Creating A New Partition
Note: For new hard drives, you need to initialize and partition your hard drive before it will appear in Windows Explorer.
5 6
The best way to partition a new hard drive is by using the manufacturer's program. Most hard drives should come with a CD that includes its installation program. If not, visit the manufacturer's website to see if a download is available. If the manufacturer's program is not available, try the following instead:
Caution: Doing the following will erase any existing data on the drive. If the drive is damaged and you wish to recover the data, continuing may overwrite the existing information!
click System and Security), then click Administrative Tools. Click Computer Management, then click Disk Management from the menu on the left side of the screen. Click on the new drive, then click on the Action tab at the top of the screen. Go to All Tasks, then click on Format from the menu. Select the file system and other choices you want, then click OK.
Creating a new partition in Mac OS X 10.4 or higher
If you are using a new hard drive, you may need to initialize it first. Initialize your internal hard drive using Drive Setup from the Mac OS CD that came with your computer.
To initialize a Hard Drive:
1 Start your computer from the Mac OS CD. 2 Locate the Utilities folder on the Mac OS CD and
double-click it to open the folder.
6
3 Double-click Drive Setup. 4 In the list of drives, select the drive you want to
Using your memory card reader
The enclosure provides two USB 3.0 multimedia memory card slots:
Memory card slots Compatible memory cards
initialize, then click Initialize.
Formatting the hard drive on your Mac
To format your hard drive with Mac OS Extended format:
This method of formatting hard drives allows for more efficient use of hard drive storage space. 1 Click Custom Setup. 2 Select the Type menu in the Volume Info area, then choose Mac OS Extended Format. 3 Resize the volumes if desired. 4 When ready, click OK, then click Initialize.
SD/MMC/MS/MS-PRO/xD
CF/MD
· Secure Digital card(SDXC, SDHC, SD) · Multi Media card(MMC) · Sony® Memory stick (MS, MS PRO) · xD picture cards Note: A memory card adapter is required for Mini SD, RS MMC, MS DUO, MS PRO DUO, and Micro SD. · Accepts Compact FlashTM memory cards (UDMA, type I/II) · IBMTM Microdrive
If initialization fails, do the following:
1 Choose Initialization Options from the Functions
To use the memory card reader with Windows:
1 Insert a memory card into the appropriate slot. Caution: Make sure that the card is inserted into the correct slot and in the correct direction. Failure to do so may result in damage to the card or the slot.
menu. 2 Click the checkbox next to Low level format, then click OK. Choosing this option adds significant time to the initialization process.
To format the hard drive:
1 Start the Disk Utility tool (under Applications). 2 Select the new hard drive you are trying to
install.
3 Click the Erase tab. 4 Choose a volume format and assign a name to
the new drive, then click Erase.
Using the USB hubs on the enclosure
The enclosure provides two USB 3.0 hubs, you can plug any of the following low-powered USB devices into these ports: · Keyboard · Mouse · Keypad · Floppy drive · Network adapter · Webcam · Speakers · Microphone · Card reader · Pen drive · DVD/CD rewriteable · Digital camera · Low-capacity 2.5" external HD enclosure
Note: Most USB devices require that software drivers be installed before connecting them to a computer. When installing a USB device, always follow the USB peripheral's installation instructions provided by the manufacturer.
double-click the drive icon for the slot you are using. 3 To access files and folders on the inserted card, use the normal Windows procedures for opening, copying, pasting, or deleting files and folders. 4 When you have finished working with the files on the memory card, right-click the memory card icon, and click Eject. 5 Remove the memory card.
Caution: Do not remove a memory card while the card reader LED is flashing or blinking.
2 Open My Computer or Windows Explorer, then
Formatting a memory card
If your computer has trouble recognizing a new memory card, format the memory card in your camera or by using the following procedure on your computer.
To format a memory card:
1 Click Start, then click My Computer. 2 Under "Removable Storage," right-click the
3
4 5 6
memory card icon representing the card type inserted, then click Format. Type a label name into the label field if you want to see the name of your memory card appear under its memory card icon. Click Start. The card is formatted. When the formatting is completed, click OK on the Format Complete window. Click Close to finish.
RF-HD3035
7
Installing the software
The installation CD includes backup software to enable you to back up your files.
Note: This Roxio Back On Track software runs only on Windows 7, Windows Vista, and Windows XP computers using USB. Important: Before installing the backup software, make sure that your Windows operating system has been updated to the latest service pack. To make sure you have the latest service pack, run Windows Update. No additional driver is required.
4 Click Next. The Roxio End-User License
Agreement screen opens.
To install Roxio Back On Track:
1 Save all files and close all programs. 2 Insert the included CD into your optical drive.
The introductory screen opens. Or, if the screen does not open, double-click the Run.exe file on the CD.
5 Read the license agreement, then click on "I
accept the terms of the License Agreement." 6 Click Next to proceed. The Choose Setup Type screen opens.
3 Click Install Backup Software. The Welcome screen
opens.
7 Choose the setup type, then click Next to start
installation. The Ready to Install screen opens.
8 Click Install to install the software.
8
9 It may take several minutes to install the
software.
The first time you run the software, the Product Registration screen opens.
2 Complete the product registration information 10 When installation is complete, the Setup Wizard
Completed screen opens.
as prompted (first time only). The main screen opens.
3 To back up or restore files, follow the on-screen
guide. For help, press F1 or click Help.
11 Click Finish to complete the installation.
Using your enclosure
Starting Roxio Back On Track
To start Roxio Back On Track:
1 Press the backup button (the button with the
Backing up your files
The Backup Files project lets you back up important files to a disc, hard drive, or other storage device. A Backup Files project can be scheduled to run daily, weekly, or monthly. Large backups are automatically spread across as many discs as required. Begin by selecting the drive or folder containing the files you would like to archive. You can choose to archive all the files in the selected path or just certain types of files. Several preset file categories are available. Finally, schedule the project to run on a regular basis, or click the action button to begin recording now.
Rocketfish logo on it) on the front of the enclosure. -ORClick Start, BackOnTrack (folder), then click BackOnTrack.
RF-HD3035
9
Selecting files to back up
You can back up all of the files in a selected path or limit your project to certain file categories. The following categories can be selected from the project window: Email, Financial, Music, Photos, Productivity, and Video and Recorded TV. You can also create one custom category.
By default, files will be selected based on the following criteria: · All files in the selected path: All files on the drive or folder you selected to archive. · Email: All files with the following file name extensions --- .dbx, .eml, .eudora, .mozilla, .msg, .pbx, .pst, .wab, .mbx, .mim, .mime, .mlm, .wcm, and .pfc. · Financial: All files with the following file name extensions ---.mbf, .mny, .ofc, .ptb, .ptdb, .q00, .q01, .q02, .q03, .q04, .q05, .q06, .q07, .q08, .q09, .q98, .qba, .qbb, .qbi, .qbw, .qbx, .qdb, .qdf, .qdt, .qel, .qif, .qph, .sdb, .t01, .t02, .t03, .t04, .t05, .t06, .ta0, .ta1, .ta2, .ta3, .ta4, .ta5, .ta8, .ta9, .tax, .qmd, .mn4, .txf, .tax2008, .tax2009, .tax2010, and .tax2011. · Music: All files with the following file name extensions --- .669, .aa, .aac, .aif, .aifc, .aiff, .amf, .amr, .apl, .au, .bwf, .cda, .cdda, .dcm, .far, .flac, .it, .itz, .kar, .m3u, .m3url, .m4a, .m4b, .m4p, .mdz, .mid, .midi, .miz, .mp1, .mp2v, .mp3, .mpga, .mpv2, .mtm, .nsa, .nst, .ogg, .okt, .pls, .qcp, .ra, .rmi, .s3m, .s3z, .sd2, .shn, .snd, .stm, .stz, .ult, .ulw, .voc, .wav, .wax, .wma, .wpl, .xm, .xpl, .asx, and .m4u. Your entire My Music folder (Windows XP) or Music folder (Windows Vista and Windows 7) is included if it is located on the drive or in the folder you selected to archive. · Photos: All files with the following file name extensions --- .cam, .cr2, .crw, .dcr, .j2c, .j2k, .jfi, .jfif, .jif, .jp2, .jpe, .jpeg, .jpg, .jpx, .k25, .kdc, .kqp, .mrw, .nef, .orf, .pef, .pmp, .raf, .raw, .srf, .thm, .3ds, .ai, .ait, .ani, .art, .b3d, .bmp, .can, .cdr, .cdt,
.cgm, .clp, .cmt, .cpt, .cur, .dcx, .dds, .dib, .djvu, .drw, .drz, .dwg, .dxf, .emf, .eps, .epsf, .fax, .fi, .fmf, .fpx, .fxo, .fxs, .g3, .g3n, .gif, .gmf, .grb, .gro, .gsm, .gtif, .hpi, .icb, .icl, .ico, .ilbm, .img, .indd, .indt, .iw44, .lbm, .lwi, .mac, .macp, .mix, .mng, .mod, .mpnt, .msp, .ncr, .ngg, .nlm, .nol, .odg, .paint, .pat, .pcd, .pct, .pcx, .pdl, .pdp, .pict, .pmd, .pmg, .png, .pnm, .pnt, .pntg, .pp4, .pp5, .ppm, .prm, .psd, .psp, .pspimage, .pub, .qti, .qxd, .qxt, .rgb, .rle, .rppm, .sci, .sgi, .slddrw, .svg, .svg2, .targa, .tcw, .tga, .tif, .tiff, .vda, .vdx, .vsd, .vss, .vst, .vsx, .vtx, .wmf, .wmz, and .wpg. Your entire My Pictures folder (Windows XP) or Pictures folder (Windows Vista and Windows 7) is included if it is located on the drive or in the folder you selected to archive. · Productivity: All files with the following file name extensions --- .bk0, .bk1, .bk2, .bk3, .bk4, .bk5, .bk6, .bk7, .bk8, .doc, .docm, .docx, .dot, .dotm, .dotx, .lwp, .odt, .ott, .pdf, .ps, .rtf, .txt, .wpd, .wps, .wpt, .wri, .123, .dif, .ods, .ots, .qpw, .wk1, .wk3, .wk4, .wks, .xla, .xlam, .xlr, .xls, .xlsb, .xlsm, .xlsx, .xlt, .xltm, .xltx, .odp, .otp, .pot, .potm, .potx, .ppa, .ppam, .pps, .ppsm, .ppsx, .ppt, .pptm, .pptx, .prz, .shw, .mpp, .wp, .wp6, .wmlx, and .oft. In Windows XP, your my Documents folder, with the exception of your My Pictures, My Videos, My DVDs, and My Music folders, is included if it is located on the drive or in the folder you selected to archive. In Windows Vista and Windows 7, your Documents folder with the exception of your Pictures, Videos, DVDs, and Music folders, is included if it is located on the drive or in the folder you selected to archive. · Video and Recorded TV: All files with the following file name extensions - .3g2, .3gp, .3gp2, .3gpp, .amc, .asf, .avi, .cin, .dv, .flc, .ivf, .m15, .m1v, .m2p, .m2v, .m4e, .m4v, .m75, .mov, .mp4, .mpe, .mpeg, .mpg, .mpm, .mpv, .mswmm, .nsv, .ogm, .qt, .qtl, .qts, .rm, .rmvb, .rp, .rt, .rts, .rtsp, .rv, .sdv, .smi, .smil, .sml, .ssm, .swf, .vfw, .wm, .wmd, .wmv, .wmx, .wvx, .xmz, .m1p, .mp2, .vbs, .xtl, .dvr-ms, and .wtv. Your My Videos folder (Windows XP) or Videos folder (Windows Vista and Windows 7) is included if it is located on the drive or in the folder you selected to archive.
Tip: You can add to the list of file extensions included in any file category by using the controls on the Backup options panel. See "Backup Files options" on page 13 for more information.
10
Creating a custom category
Most computer files are defined by the two-, three-, or four-letter extension placed at the end of their names. Plain text files, for example, can be identified by their .txt file extension. When you record a Backup Files project, the program is simply searching your computer for files with extensions that correspond to the categories you selected. If you want to archive files that are not included on any of the pre-defined lists, you could choose to archive all files or edit one of the existing categories (see "Backup Files options" on page 13 for more information), or you could create your own custom list of file extensions that will appear as the category called My Custom Category.
3 Click Browse and use the Browse for Folder
window to select the drive or folder containing the files you would like to archive.
Note: Files stored on different source drives cannot be archived in the same Backup Files project.
4 Select the types of files you wish to archive.
Choose either All files in the selected path or Only files in the following categories. If you selected only files in the following categories, select the file categories you would like to archive. The choices are Email, Financial, Music, Photos, Productivity, and Video and Recorded TV. If you created a custom category, it will also be available. See "Creating a custom category" on page 11 for more information.
Note: Hold your mouse pointer over an icon to see the category it represents.
To create a custom file category:
1 Click Options.
5 If you want, place a check mark in the Only
2 Click File Backup on the left side of the Options
3 4 5 6
7
window. The File Category options are displayed on the right side of the window. Click My Custom Category. Type a file extension into the Extension text box. It is not necessary to include the period. Click Add. The file extension is added to the list box on the right. Continue adding file extensions one at a time until you are finished. To remove a file extension from your list, click its name in the list box, then click Remove. Click OK to save your list as My Custom Category. This new category is added to the list of file categories in the project window.
archive files changed since checkbox to limit the backup to files that have been modified since the date you select. To change the date, click the date box arrow to open the calendar. When you click a date in the calendar, the date is automatically entered into the date box. 6 Select a destination for your archived files from the Destination Selection list. The destination can be a hard drive, a disc recorder, or another type of storage device. 7 To compress or encrypt your backup, click Advanced and select the appropriate settings: · Compression-Click the Compress check box if you would like the back up files created for this project to be compressed. Compression reduces file size. The amount of compression varies based on the types of files you back up. Compressed files take longer to restore than uncompressed files. · Encryption-Click the Encrypt check box to require a password to open or restore your backup project. Type a password for this project in the space provided and again in the confirmation box.
Caution: If you forget or lose your password, you will not be able to open or restore your backup project.
8 Click the action
Creating a new Backup Files project
To create a new Backup Files project:
1 Click the FIle Backup tab in the project list. A list
of projects is displayed.
button to run the project now. To schedule your project, choose one of the options in Step 3 on the project window. For more information about scheduling a project, see "Using the Backup Files scheduler" on page 12. -ORTo save your project, click Save. Enter a name for the project, then click OK. If you decided to run the project now, a progress screen will inform you when the project has been completed. 9 Click Done to return to the project window.
Note: Scheduled projects must be saved before they can be run.
2 Click the Backup Files project.
RF-HD3035
11
To open and run a saved Backup Files project:
1 Click File. If the project is listed on the File
Scheduler tips
The following tips will help you to better understand the scheduler: · Scheduled projects must be saved before they can be run. · Keep the following limitations in mind if you want a scheduled project to be completed successfully while you are away from your computer: · Backup Files will not overwrite files without your permission. This usually involves clicking on a series of message boxes. To perform an unattended archive project, you may need to change the hard drive destination for your archived files or archive your files to a disc. · If you are archiving files onto a disc, a blank disc must be inserted in your drive when the project starts. · Some of the energy conservation settings available for your computer may keep a scheduled project from starting even if the project launcher is open. · The Backup Files project uses a scheduler that is part of the Windows operating system. A system administrator has the ability to prevent a computer user from using the scheduler or running scheduled projects. If the Backup Files scheduler does not work as expected, consult your system administrator. · You can use your Windows scheduling software to customize when your saved projects run. You can schedule a project to run twice a week or once every hour. Save your project, then edit the schedule using the Windows Scheduler. To run Windows Scheduler in Windows XP, click Start, All Programs, Accessories, System Tools, Scheduled Tasks. To run Windows Scheduler in Windows Vista and Windows 7, click Start, All Programs, Accessories, System Tools, Task Scheduler.
Note: See Windows Help and Support for information on using the Windows Scheduler. Remember that scheduling changes made directly in the Windows Scheduler are not displayed in the Backup Files project window.
menu, select it. If the project is not listed, click Open and use the dialog box to navigate to the project file. By default, project files are saved in your Windows Vista and Windows 7 Documents folder or Windows XP My Documents folder. The settings for that project are displayed in the project window. 2 Change the project settings as needed. Click Save to save your changes. (If you save the project without changing its name, the original project is overwritten.) 3 If necessary, insert a blank or rewritable disc into the selected destination drive. 4 Click the action button to begin recording. A progress screen informs you when the project has been completed.
Using the Backup Files scheduler
Each time you create a Backup Files project, you have the option of running it immediately or scheduling the project to run at a regular interval that you choose.
To schedule a Backup Files project:
1 Open the Backup Files project. 2 Set up a new project or select a saved project.
See "Creating a new Backup Files project" on page 11 for more information on starting a project. 3 Choose one of the scheduling options in the project window: · Run now-The project runs after you click the action button. · Daily-The project runs every day at the time the project was created. · Weekly-The project runs once a week at the time and on the day of the week the project was created. · Monthly-The project runs once a month at the time and on the day of the month the project was created. 4 Save your project by clicking Save. A save window appears. 5 Name the project, then click OK.
Note: If you schedule a monthly backup for the 31st day of the month, your backup will be skipped during months with fewer than 31 days. Backups scheduled on the 29th or 30th day of the month will also be skipped during some months.
12
Backup tips
· All of the discs used in a Back Up Files project must be the same general format. · In a multi-disc Back Up Files project, files are assigned based on the size of the first disc you use. If your first disc has a capacity of 650 MB, for example, no more than 650 MB will be burned on any subsequent disc, even if it has a larger capacity. This also means that no disc in a project can have a smaller capacity than the first disc used in a project. · Discs used in a Back Up Files project are closed once they are recorded. If you use write-once discs, you will not be able to add additional data. · To view a list of the files on a Back Up Files disc, open the .RFI file placed on the disc.
4 Continue adding file extensions one at a time
until you are finished. To remove a file extension from your list, click its name in the list box, then click Remove. 5 Click OK to save your list as My Custom Category.
To add file extensions to one of the preset file selection categories:
1 Select the file category you would like to
2 3 4 5
Backup Files options
Click Options on the control panel to open the Options window. Here you find settings that can be used to customize your application. Each available group of options is displayed in the left pane. Click the name of an options group, and those option settings appear on the right. Each panel includes a Restore Defaults button that can be used to restore the default settings for the options on that panel only.
Note: Not all options are available for all drives or operating systems.
customize. The choices are Email, Financial, Music, Photos, Productivity, and Video & Recorded TV. Enter the file extension you would like to add into the Extension text box. Click Add. The file extension is added to the list box on the right. Continue adding file extensions one at a time until you are finished. Click OK.
Using one-touch backup
To use one-touch backup if you have set up a backup project:
· Press the One-Touch button on the HDD enclosure. The backup process begins.
To use one-touch backup if you have NOT set up a backup project:
1 Press the One-Touch button on the HDD
Backup options-FIle Backup panel
Use the Backup panel to customize the following Backup Files settings: · File category options-Use this option to create a custom file selection category or to add additional file types to any of the preset categories. · Launch Backup Files when my external hard drive is re-connected-Select this option to easily back up files to an external hard drive. · Verify data written to the disc after burning-A check mark in this box adds a verification step to make sure that no errors occur during the recording of your discs.
enclosure. The Roxio BackOnTrack software opens with the Backup Files page displayed. 2 Follow the on-screen instructions to set up a backup project. 3 After a backup project is set up, push the One-Touch button to backup your data. 4 To modify One-Touch backups in the future, follow the instructions for setting up backup projects.
To create a new custom category called My Custom Category:
1 Select My Custom Category from the list of file
categories.
2 Type a file extension into the Extension text box. 3 Click Add. The file extension is added to the list
box on the right.
RF-HD3035
13
Restoring files
The Restore Files project restores individual files and folders that you have protected using the Backup Files project. With Restore Files, you select a backup, search for the files or folder you would like to restore, and then click the action button. The files will be restored to the location you choose.
8 Click the action
your files.
button to begin restoring
Restore files tips
· Restore Files can be used to restore as many files or folders as you wish. · Restore Files will not overwrite a file without getting your permission. · Backup files created with the Backup Files project can be recognized by their .rfi file name extension. If you double-click an .rfi file, the project launcher opens. · The Restore Files search box does not support wildcard expressions. · System files cannot be restored to their original location if they are in use by your computer's operating system.
Disconnecting the enclosure from your computer
To restore a file:
1 Click the File Backup tab in the project list. A list
of projects is displayed.
You can disconnect the enclosure at any time while the computer is turned off. If, however, you want to disconnect it while the computer is on, make sure that you do it correctly.
2 Click the Restore Files project. The project 3 4 5
6
7
window opens. If the backup file was saved on a disc, insert the disc into a compatible disc drive. Click Browse at the top of the Selective Restore project window. A dialog box opens. Use the dialog box to navigate to the backup file that contains the files you would like to restore. After you have found the backup file, click it, then click OK. The content of the backup file appears as a directory tree in the project window. Select the files and folders you would like to restore using one of the following methods: · Navigate through the directory tree in the project window. When you find a file or folder you want to restore, select it by clicking on its name. · Type all or part of a file or folder name into the Search box to the right of the Browse button. Click Search. The search results are displayed in the project window. If the file you want to restore appears in the search results, select it by clicking once on its name. If the file does not appear in the search results, try using different search terms or looking in a different backup file. Choose Browse from the Destination Selection menu and select the location where your restored files will be saved.
To disconnect the enclosure while Windows is running:
Note: If a drive window is open or the hard drive enclosure is active, close any associated windows before trying to remove the enclosure. 1 Right-click the Safely Remove Hardware icon
(located in the notification area of the taskbar where you usually see the time displayed). 2 Click the device you want to unplug, then click STOP. 3 When Windows notifies you that it is safe to do so, unplug the enclosure from your computer.
1 Drag the USB icon into the TRASH. 2 Unplug the enclosure.
To disconnect the enclosure while Mac OS X is running:
Uninstalling the backup software
To uninstall the backup software in Windows:
1 Open the Control Panel. 2 Click Add or Remove Programs (Windows XP) or
Programs and Features (Windows Vista and Windows 7). 3 Locate Roxio BackOnTrack on the list, then click Change/Remove (Windows XP) or Uninstall (Windows Vista and Windows 7). 4 Follow the on-screen instructions to remove the software completely from your computer.
14
5 After the software is uninstalled, restart your
computer if prompted.
Specifications
Hard drive type 3.5" SATA HDD, up to 2 TB 1.67 × 8.74 × 5.19 inches (42.5 × 222 × 132 mm) SATA I/II USB 3.0 Dimensions Interface to device Interface to PC
Troubleshooting
I do not see the enclosure/additional drive in my system · Make sure that the USB cable is connected firmly to your enclosure and computer. · Make sure that the USB cable is not broken. · Open the enclosure and make sure that all of the connections are securely fastened. · Use the rear USB ports on the back of the computer instead of the front USB ports. · Check for motherboard compatibility issues. · Check for hard drive compatibility issues. · Windows users: Partition and format the new hard drive by using Disk Management in Windows. · Macintosh users: Partition and format the new hard drive by clicking Disk Utilities in the Utilities folder, then clicking your external enclosure. · Make sure the HDD has been initialized and partitioned before hardware installation. Refer to "Creating A New Partition" on page 7. · Try a different memory card of the same type in the same slot. If the different memory card works, replace the original memory card. · Shine a flashlight into the empty card slots. Look to see if any pin inside is bent. Straighten bent pins with the end of a mechanical pencil or paper clip. · Make sure that memory card is fully inserted into the slot. · Try a different memory card of the same type in the same slot. If the different memory card works, replace the original memory card. · Some cards have a read/write security switch. Make sure that security switch is set to Write Enabled. · Make sure that the amount of data you tried to store does not exceed the capacity of the card. · Inspect the ends of the memory cards for dirt or material closing a hole. Clean the contacts with a lint-free cloth and small amounts of isopropyl alcohol. · If errors persist, replace the memory card. · Your system may be operating at USB 2.0 speeds due to an incorrect driver installation of the USB 3.0 adapter card or a system that does not support USB 3.0. If your system includes a PCIe slot, you can achieve SuperSpeed USB transfer rates by installing a USB 3.0 PCIe adapter card. · Make sure you have installed the backup utility program, if the utility program has been installed successfully, it will show an icon in the toolbar when Windows was booting.
Backup button External features Card reader slots (front) USB 3.0 ports (2) Power button External features (back) DC power jack B-type USB 3.0 port (1)
Memory cards supported
There is a USB icon in the system tray, but I can't find the hard disk in MY COMPUTER. My memory card does not appear in My Computer or Windows Explorer
Power supply Indicator Compatibility
· Secure Digital card(SDXC, SDHC, SD) · Multi Media card(MMC) · Sony® Memory stick (MS, MS PRO) · xD picture cards · Compact FlashTM memory cards (UDMA, type I/II) · IBMTM Microdrive Note: A memory card adapter is required for Mini SD, RS MMC, MS DUO, MS PRO DUO, and Micro SD. AC power adapter
Power-on/backup active LED Card reader active LED Windows XP, Windows Vista, Windows 7, Mac 10.4 or higher
Operating temperature 32~104°F (0~40°C) Operating humidity Certification Operating: 20 to 80% non-condensing FCC Class B, ICES-003
My memory card appears in My Computer but I get errors when writing or reading
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply within the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna.
The data transfer between computer and device is slow
The backup button doesn't work.
RF-HD3035
15
· Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced technician for help.
FCC warning
Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user's authority to operate this equipment.
Canada ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003.
16
One-year limited warranty
Rocketfish Products ("Rocketfish") warrants to you, the original purchaser of this new RF-HD3035 ("Product"), that the Product shall be free of defects in the original manufacture of the material or workmanship for one (1) year from the purchase of the Product ("Warranty Period"). This Product must be purchased from an authorized dealer of Rocketfish brand products and packaged with this warranty statement. This warranty does not cover refurbished Product. If you notify Rocketfish during the Warranty Period of a defect covered by this warranty that requires service, terms of this warranty apply.
How long does the coverage last?
The Warranty Period lasts for one year (365 days), beginning on the date you purchased the Product. The purchase date is printed on the receipt you received with the product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the material or workmanship of the Product is determined to be defective by an authorized Rocketfish repair center or store personnel, Rocketfish will (at its sole option): (1) repair the Product with new or rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable products or parts. Products and parts replaced under this warranty become the property of Rocketfish and are not returned to you. If service of Products and parts are required after the Warranty Period expires, you must pay all labor and parts charges. This warranty lasts as long as you own your Rocketfish Product during the Warranty Period. Warranty coverage terminates if you sell or otherwise transfer the Product.
How to obtain warranty service?
If you purchased the Product at a retail store location, take your original receipt and the Product to the store you purchased it from. Make sure that you place the Product in its original packaging or packaging that provides the same amount of protection as the original packaging. If you purchased the Product from an online web site, mail your original receipt and the Product to the address listed on the web site. Make sure that you put the Product in its original packaging or packaging that provides the same amount of protection as the original packaging.
This warranty also does not cover: · Damage due to incorrect operation or maintenance · Connection to an incorrect voltage supply · Attempted repair by anyone other than a facility authorized by Rocketfish to service the Product · Products sold as is or with all faults · Consumables, such as fuses or batteries · Products where the factory applied serial number has been altered or removed REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY. ROCKETFISH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS. ROCKETFISH PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE WARRANTY PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE. Contact Rocketfish: For customer service please call 1-800-620-2790 www.rocketfishproducts.com Distributed by Best Buy Purchasing, LLC 7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645 © 2010 BBY Solutions, Inc. All rights reserved. ROCKETFISH is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners.
Where is the warranty valid?
This warranty is valid only to the original purchaser of the Product in the United States, Canada, and Mexico.
What does the warranty not cover?
This warranty does not cover: · Customer instruction · Installation · Set up adjustments · Cosmetic damage · Damage due to acts of God, such as lightning strikes · Accident · Misuse · Abuse · Negligence · Commercial use · Modification of any part of the Product, including the antenna
RF-HD3035
17
www.rocketfishproducts.com (800) 620-2790 Distributed by Best Buy Purchasing, LLC 7601 Penn Avenue South, Richfield, MN 55423-3645 USA © 2010 BBY Solutions, Inc. All rights reserved. ROCKETFISH is a trademark of BBY Solutions, Inc. All other products and brand names are trademarks of their respective owners.
10-1087 ENGLISH