Text preview for : SONY DCR-SR68 985273651.pdf part of SONY DCR-SR58E/SR68/SR68E/ SR78E/SR88/SR88E DCR-SR58E/SR68/SR68E/
SR78E/SR88/SR88E service manual level 1,2,3
Back to : DCR-SR68.part1.rar | Home
DCR-SR58E/SR68/SR68E/ SR78E/SR88/SR88E
Ver. 1.0 2010.01
985273651.pdf
Revision History
Ver. 1.0 Date 2010.01 History Official Release Contents -- S.M. Rev. issued --
Auto-ADJ
(ENGLISH)
For adjusting these models, the Adjust manual and the Adjust station are required. For details of installing the Adjust station and the Adjust manual, please refer to the Service manual ADJ of HDR-TG5/TG5E/TG5V/TG5VE/TG7VE.
Adjust station It is the software to start Adjust manual for the specified product. Adjust manual It is the software to adjust and check digital cameras and camcorders for service. The executable file (.msi) for each product is available. For the operating procedure of the Adjust manual, after starting the Adjust manual software, please refer to "About the Adjust manual software" on the `NOTE' tab.
Note: In case of updating the Adjust manual or the Adjust station program, install with overwriting it.
Adjust manual Installation
Note 1: Note 2: Be sure to install Adjust station first. Do not change the initially set folder to which the program is forwarded to.
1. Download the Adjust manual (DCR-SR68 Series AM Ver_.r.zip) from ESI home page. 2. Double-click Setup.msi. 3. The installation window appears. Click [Next]. Adjust manual installation starts. 4. The widow to choose the destination folder of the Adjust manual program appears. Click [Next]. 5. When Adjust manual is installed normally, the confirmation window appears. Click [Close]. The installer is closed.
DCR-SR58E/SR68/SR68E/SR78E/SR88/SR88E_ADJ
9-852-736-51
Sony EMCS Co.
2010A0800-1 © 2010.01 Published by Tokai TEC