EVOi.324.pdf part of JBL EVOi 324 EVOi.324.pdf, EVOi.324 The Intelligent Powered Loudspeaker text manual preview

Text preview for : EVOi.324.pdf part of JBL EVOi 324 EVOi.324 The Intelligent Powered Loudspeaker

Back to : EVOi.324.pdf | Home

EVOi.324
Application:
Fixed Installations Houses of Worship Schools Performing Arts Centers Civic Venues

Intelligent Powered Speaker System

Key Features:
EVOi.324 Automatic Acoustic set-up, AutoEQ and Delay-Set* Automated Feedback Suppression, Anti Feedback Control* Automatic Self Diagnostics, Speaker Status Reporting* Enhanced Total Thermal Management System (ETTMS) Thermal Modeling Driver Thermal Protection Pre-set EQ for selectable system response 3-way tri-amp Filtered Array Technology (FATTM) design 80° x 80° horizontal and vertical constant coverage 2 x 14" NDDŽ LFs, ThermomasterTM baffle design 1 x 1.5" exit large format neodymium compression driver All aluminum waveguide Very high performance-to-weight ratio 2 x 600 W digital amplifiers 1 x 100 W linear amplifier 2nd Order geometric SMC white or black paintable enclosure Std M10 eyebolt fixtures, 6 connection points, 3 eyebolt kit Free standing foot kit Optional wall bracket adapter, WM300
*These functions are accessible through the use of EVOi.net

Specifications:
Frequency Range (-10 dB): Freq. Response (-3 dB): Horizontal Coverage (-6 dB): Vertical Coverage (-6 dB): Directivity Factor (Q): Directivity Index (DI): Sensitivity: Dimensions (H x W x D): Net Weight: Low Frequency Driver: Low Frequency/Mid Driver: High Frequency Driver: Waveguide: Amplifier Power Low Frequency: Max. Continuous Output: Burst Output: Signal-to-Noise Ratio: Amplifier Power LF/Mid: Max. Continuous Output: Burst Output: Signal-to-Noise Ratio: Amplifier Power HF: Maximum Continuous Output: Burst Output: Signal-to-Noise Ratio: Audio Connectors: LF Crossover Frequency: LF/Mid Crossover Frequency: HF Crossover Frequency: Limiting: EQ type: 40 Hz - 18 kHz 48 Hz - 16 kHz 80° (averaged 500 Hz -16 kHz) 80° (averaged 500 Hz -16 kHz) 11.4 (averaged 500 Hz -16 kHz) 10.6 dB (averaged 500 Hz - 16 kHz) 101 dB (-15 dBu @ 1 meter)* 1067 x 353 x 386.2 mm, (42 x 13.9 x 15.2 in) 29.48 kg, (65 lbs) 14" NDD, Carbon Fiber Cone, Dual 2" Voice Coils, Integral ThermomasterTM 14" NDD, Carbon Fiber Cone, Dual 2" Voice Coils, Integral Thermomaster 2430, Large Format, 1.5" Exit Compression Driver with a Neodymium Motor, 100 Watt 3" Encapsulated Voice Coil, Aluminum Diaphragm Aluminum thermally coupled to 2430 via "silpad" gasket 440 Hz load ref = 6 Ohms, Input = 1.4 Vrms/5.14 dBu, Output = 300W, THD<0.3% 330 W (with Limiters) 600 W >90 dB A weighted 440 Hz load ref = 6 Ohms, Input = 1.4 Vrms/5.14 dBu, Output = 300 W, THD<0.3% 330 W (with Limiters) 600 W >90 dB A weighted 3 kHz load ref = 8 Ohms, Input = 3.2 Vrms/12.3 dBu, Output = 35 W, THD<0.2% 50 Wrms (with Limiters) 100 W >90 dB A weighted Balanced XLR 250 Hz 1.25 kHz 1.25 kHz Dynamic Amplifier Clip Prevention Parametric

Auto-EQ Auto-EQ Sample Rate: MLS Sequence Length: Number of Averaged Sequences: Maximum impulse response length: FFT Length: FFT window type: Log-frequency domain resolution: Number of EQ filters: Anti Feedback Control Number of Fixed Filters: Number of Live Filters: Maximum Cut: Width: Self-Diagnostics: 6 kHz 4095 8 682 ms 4096 Raised Cosine Bell 1/50th Octave 6 6 Parametric 6 Parametric 15 dB 0.05 - 0.4 Octave 18 Status Reporting Conditions

*EVOi.324 Sensitivity Chart
Electrical Input dBu -25 -20 -15 -10 -5 0 5 8 10 Acoustic Output Measured SPL Volts (AC RMS) (dB re: 20uPa) 0.04 0.08 0.14 0.25 0.44 0.78 1.38 1.95 2.45 91 96 101 106 110 116 118 120 122

101 dB = Equivalent 1w/1m Specification

Frequency Response is measured on-axis at a distance referenced to 1m @ -10 dBu input, shown as a whole space (4) and half space (2, dotted line) environment.

Horizontal Off-axis Frequency Response

Directivity vs. Frequency

Vertical Off-axis Frequency Response (down)

Beamwidth vs. Frequency

Vertical Off-axis Frequency Response (up)

Vertical Polars

Horizontal Polars

D/A

D/A

D/A

Included Accessories Eyebolt Kitfor suspended applications Foot Kitfor free standing applications Optional Accessories Wall Mount Adapter Kit, WM300 Horizontal Suspension Kit, HS-1
1 Turn Foot To Set Tilt. 2 Tighten Screw.

Eyebolt Washer

Shipping Specifications EVOi.324
Foot

Placeholder Bolt

Washer Nut Adjustable Foot

Shipping Weight 36.6 kg (85 lbs) Shipping Dimensions 514 mm x 1124 mm x 508 mm (20.25 in x 44.25 in x 20 in)

JBL Professional 8500 Balboa Boulevard, P.O. Box 2200 Northridge, California 91329 U.S.A.
A Harman International Company Š Copyright 2001 JBL Professional

SS EVOi.324 CRP 15M 12/01