Text preview for : 8m052539 EW24D70NCW.pdf part of EW24D70NCW EW24D70NCW EW24D70NCW
Back to : 8m052539 EW24D70NCW.pdf | Home
8m052539
5% - 100% +Vin 0 approx. 5 ms*
(valid when the "C" jumper is removed)
3 Dimming Options
Endicott Research Group, Inc.
2601 Wayne St., Endicott NY 13760 607-754-9187 Fax 607-754-9255 http://www.ergpower.com
8m052539
DC to AC Inverter
* should be selected to be compatible with LCD and display driver
+ Vin -
(1)
1 2
3
Pulse-Width Modulated Controlled
Specifications and Applications Information
3/22/01
Preliminary
8m Class
+Vin
The ERG 8m052539 (8m Class) low profile dc to ac inverter is specifically designed to power the EDT EW24D70NCW LCD display module to a moderate brightness level from a +5 volt dc source.
100 Kohms*
8m Package Package Configuration
1 2 3 4
This low profile inverter features:
1 2 3
* value should be low enough to maintain minimum tube current at minimum brightness
+ Vin -
(1)
Resistive Controlled
ü ü ü ü ü ü ü ü ü
Vmin* to +Vin
Less Than 8 mm in Height LCD Module Specific Display Compatible Output Connector Firm Specifications Application Information Designed, Manufactured and Supported in the USA Custom Input and Output Voltages Flexible System Interface Notebook Display Head Compatible
Input
.55 [14,0]
c
2.35 [59,7]
3.58 [90,9]
* Vmin should be high enough to maintain minimum tube current
+ Vin -
(1)
1 2
3
Voltage Controlled
Pin Descriptions
Input Connector
4 pins are 0.315" [8,00] Long, 0.025" [0,63] Square and are on 0.100" [2,54] Centers.
Output Connector
JAE IL-G-5P-S3L2-E .116 [2,95] DIA.(2X)
Note 1 Input by-pass capacitor (25 uf - 100uf) may be required to reduce reflected ripple.
Endicott Research Group, Inc.
2601 Wayne St., Endicott NY 13760 607-754-9187
page 4.
Con1-1 Con1-2 Con1-3 Con1-4
Vin(+) GND Control * NC
* Valid when the "C" Jumper is removed
Con2-1 Con2-2 Con2-3 Con2-4 Con2-5
NC ACout NC NC ACout
Output
.55 [14,0]
5
2
.12 [3,0] .79 [20,1]
8m052539
Absolute Maximum Ratings
Rating Input Voltage Range Operating Temperature Storage Temperature Symbol Vi n To Tstg Value -0.3 to +5.5 -0 to +70 -40 to +85 Units
Relative Frequency
Typical Performance Curves
Relative Frequency vs. Input Voltage 4.0% 3.5% 3.0% 2.5% 2.0% 1.5% 1.0% 0.5% 0.0% -0.5% 3.25
8m052539
Relative Brightness vs. Input Power 140.0% 130.0% 120.0% 110.0% 100.0% 90.0% 80.0% 70.0% 60.0% 50.0% 1.25
o o
C C
Recommended Operating Conditions
Rating Input Voltage Symbol Vi n Value +2.5 to 5.5 Units V dc
4.25
5.25
6.25
7.25
Relative Brightness
V dc
1.75
2.25
2.75
3.25
Input Voltage (Vdc)
Input Power (Watts)
Electrical Characteristics
Unless otherwise noted Vin = 5.00 Volts dc and Ta = 25 C
o
Input Power vs. Input Voltage
Input Current vs. Input Voltage 0.445 Input Current (Adc) 0.435 0.425 0.415 0.405 0.395 0.385 0.375 3.25 4.25 5.25 6.25 7.25
Input Current Operating Frequency Minimum Output Voltage Efficiency Output Current Output Voltage (When powering a load simulating the referenced display) Pin3 Input Current Requirement
Iin Fo Vout (min) Iout Vout -
26 10 0 0 -
.420 31 75 5.0 3 15 11
.475 36 -
A dc KHz Vrms % marms Vrms
Input Power (Watts)
Characteristic
Symbol
Min
Typ
Max
Units
2.85 2.65 2.45 2.25 2.05 1.85 1.65 1.45 1.25 3.25
4.25
5.25
6.25
7.25
Input Voltage (Vdc)
Input Voltage (Vdc)
+Vin 5V 3.3 K
madc
Disable Circuit
1.5 K Control 1K 2N3904
2N3906 Control (pin 3) 1N4148 Valid with the "C" jumper removed
After tube has been allowed to warm-up for 5 minutes External Disable Circuit shown on page 3.
Specifications subject to change without notice.
Endicott Research Group, Inc.
Made in USA
page 2.
Endicott Research Group, Inc.
page 3.