Text preview for : VD TECH PD196I93R1.pdf part of VD Tech PD196I93R1 TV LCD Mod: PD196I93R1 service manual



Back to : VD TECH PD196I93R1.pdf | Home

COLOR TFT-LCD TV SERVICE MANUAL
MODEL : PDI-P23LCD
CAUTION !!
BEFORE SERVICING THE TFT-LCD TV, READ THE SAFETY PRECAUTIONS IN THIS MANUAL.

PDI-P23LCD SERVICE MANUAL

Document Number: PD196-093 Rev 1

CONTENTS
Contents ------------------------------------------------------------------------- 2 Safety precautions ----------------------------------------------------------- 3 Servicing precautions ------------------------------------------------------- 4 Specifications ------------------------------------------------------------------ 5 Location of control ----------------------------------------------------------- 8 External input / output -------------------------------------------------------11 Inspection instructions ------------------------------------------------------12 Deassembly procedure ---------------------------------------------------- 13 Wire dressing ------------------------------------------------------------------ 21 Part appearance ---------------------------------------------------------------23 Trouble Shooting ------------------------------------------------------------- 25 Schematic Diagram -----------------------------------------------------------27 Block Diagram ----------------------------------------------------------------- 28 PCB Layout --------------------------------------------------------------------- 29 Wave form -----------------------------------------------------------------------34 Adjustment instruction with Default Factory Data----------------- 37 Packing instructions ---------------------------------------------------------39 Mechnical exploded view ---------------------------------------------------40 Replacement part list -------------------------------------------------------- 41 Circuit descriptions ---------------------------------------------------------- 47

PDI-P23LCD SERVICE MANUAL

PAGE:2

SAFETY PRECAUTIONS
!! Important Safety Notice !!
Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the Schematic Diagram and Replacement Parts List. It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent Shock, Fire, or other Hazards. Do not modify the original design without permission of manufacturer.

Leakage Current Hot Check (See below Figure) Plug the AC cord directly into the AC outlet. Do not use a line Isolation Transformer during this check. Connect 1.5K/10watt resistor in parallel with a 0.15uF capacitor between a known good earth ground (Water Pipe, Conduit, etc.) and the exposed metallic parts. Measure the AC voltage across the resistor using AC voltmeter with 1000 ohms/volt or more sensitivity. Reverse plug of the AC cord into the AC outlet and repeat AC voltage measurements for each exposed metallic part. Any voltage measured must not exceed 0.75 volt RMS, which is, corresponds to 0.5mA. In case any measurement is out of the limits specified, there is possibility of shock hazard and the set must be checked and repaired before it is returned to the customer. Leakage Current Hot Check circuit

PDI-P23LCD SERVICE MANUAL

PAGE:3

SERVICING PRECAUTIONS
CAUTION!! Before servicing receivers covered by this service manual, read and follow the SAFETY PRECAUTIONS on page 2 of this publication. General Servicing Precautions 1.Always unplug the receiver AC power cord from AC power source before; Removing or reinstalling any component, circuit board module or any other receiver assembly. Disconnecting or reconnecting any receiver electrical plug or other electrical connection. Connecting a test substitute in parallel with an electrolytic capacitor in the receiver. CAUTION!! A wrong part substitution or incorrect polarity installation of electrolytic capacitors may result in an explosion harzard. 2.Do not spray chemicals on or near this receiver or any of its assemblies. 3.Do not defect any plug/socket voltage interlocks with which receivers covered by this service manual might be equipped. 4.Always connect the test receiver ground lead to the receiver chassis ground before connecting the test receiver positive lead. Always remove the test receiver ground lead last. 5.Do not connect the test fixture ground strap to power supply heatsink in this receiver Electrostatically Sensitive(ES) Devices Some semiconductor(solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive(ES) Device.Examples Circuit Board Foil Repair Excessive heat applied to the copper foil of any printed circuit board will weaken the adhesive that bonds the foil to the circuit board causing the foil th separate from or "lift-off" the board. The following guidelines and procedures should be flollowed whenever this condition is encountered. At IC Connections To repair a defective copper pattern at IC connections use the following procedure to install a jumper wire on the copper pattern side of the circuit board.(Use this technique only on IC connections.) 1.Carefully remove the damaged copper pattern with a sharp knife. (Remove only as much copper as absolutely necessary.) 2.Carefully scratch away the solder resist and acrylic coating(if used) from the end of the remaining coopper pattern. 3.Bend a small "U" in one end of a small guage jumper wire and carefully crimp it around the IC pin. 4.Route the jumper wire along the path of the out-away copper pattern and let it overlap the previously scraped end of the good copper pattern. Solder the overlapped area and clip off any excess jumper wire.

PDI-P23LCD SERVICE MANUAL

PAGE:4

SPECIFICATIONS
Note: Specifications and others are subject to change without notice for improvement. 1.Scope. This document is the specification of 23" Hospital grade TFT-LCD Color TV. 2.Power 1) Power requirement Input Frequency : 50/60 Input Voltage: AC 100V AC 240V Power consumption : Less than 140Watt.( Average: 95~100 Watt) 2) Power cord Use UL listed hospital grade power cord 3.Tuning system FS, 181 Channel 4.Sound output 10W+10Wrms Stereo (Max) 5.Antenna input impedance VHF / UHF at 75ohm 6.OSD Type (On Screen Display) Windows type (Center) 7.External in/output PC ANALOG INPUT, PC DIGITAL INPUT, PC AUDIO INPUT, HEADPHONE OUTPUT, COMPONENT 1 INPUT,COMPONENT2INPUT, S-VIDEO INPUT, TUNER,VIDEO OUTPUT (Audio In : 0.4Vrms, over 10K Video In : 1Vp-p, over 75) 8. Function CATV/Hyper band Auto Program Manual Program Auto Sleep Quick view ACMS(Auto channel Memory System) PSM(Picture Status memory) SSM(Sound Status memory) PIP : PC ANALOG, PC DIGITAL(Main) ­ TV, Component, Video, S-Video ARC(ASPECT RATIO CONTROL): 16:9 / 14:9 / 4:3 / 16:9 zoom / 14:9 zoom / 4:3 zoom

PDI-P23LCD SERVICE MANUAL

PAGE:5

SPECIFICATIONS
9.Receiving RF TV system
NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Model System PAL-B PAL-G PAL-I, I /I PAL-D PAL-K SECAM-B SECAM-G SECAM-D SECAM-K SECAM-K1 SECAM-I (6.0) NTSC-3.58 / 4.5 NTSC-3.58 / 5.5 NTSC-3.58 / 6.0 NTSC-3.58 / 6.5 NTSC-3.58 / 4.5(5.0) NTSC-4.43 / 5.5 NTSC-4.43 / 6.0 NTSC-4.43 / 6.5 PAL 5.5 / 60Hz PAL 6.0 / 60Hz PAL 6.5 / 60Hz SECAM 5.5 / 60Hz SECAM 6.0 / 60Hz SECAM 6.5 / 60Hz SECAM L / L' TOTAL SYSTEM PDI-P23LCD X X X X X X X X X X X O X X X X X X X X X X X X X X 1 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /

PDI-P23LCD SERVICE MANUAL

PAGE:6

SPECIFICATIONS
10. PC Mode Scan Frequency & Timing 1)Scan Freq : H: 31 61 kHz / V : 56 75 2)Preset Timing Chart Mode VGA Resolution 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1280 x 768 1280 x 768 1360 x 768 720 x 480p 1280 x 720p 1920 x 1080i Horizontal Frequency(KHz) 31.5 KHz 37.9 KHz 37.5 KHz 35.1 KHz 37.9 KHz 48.1 KHz 46.9 KHz 48.4 KHz 56.5 KHz 60.0 KHz 47.4 KHz 47.8 KHz 47.7 KHz 31.5 KHz 45.0 KHz 33.7 KHz Vertical Frequency(Hz) 60 Hz 72 Hz 75 Hz 56 Hz 60 Hz 72 Hz 75 Hz 60 Hz 70 Hz 75 Hz 60Hz RB 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz

SVGA

XGA

WXGA

DTV Note!! :

a. If the set is cold, there may be a small "flicker" when the set is switched on. This is normal, there is nothing wrong with the set. b. Some dot defects may appear on the screen, like Red,Green or Blue spots, However, this will have no impact or effect on the monitor performance. c. The resolution which is not supported will appear at the resolution which gets near to the resolution which is supported. *The standard of the resolution which gets near : H/V sync. d.Press the Q.VIEW button to switch the 640x480 60hz to 720x480P 60Hz

11. TFT ­ LCD Panel Character
1) Feature Size LCD Type Pixel Pitch Pixel Format Active Video Area Surface treatment Response Time(Typ) Viewing Angle Luminance(Typ) Contrast Ratio(Typ) Display Color Back Light :23" :Color Active Matrix TFT :0.372 mm(H) x 0.372 mm(V) :1366x768 Pixels, RGB Stripe :508.125mm(H) x 285.696mm(V) :Haze 44% , Hard coating(3H) :25mS(Typ) : Hor [Left/Right] 89Deg (Typ) / 89Deg (Typ), Ver [High(Top)/Low(Bottom)] 89Deg (Typ) / 89Deg (Typ) : 450 cd/(Typ) : 1200(Typ) : 16,777,216 Color - True : 6 CCFL ­ U Type PAGE:7

PDI-P23LCD SERVICE MANUAL

LOCATION OF CONTROL
All the function can be controlled with the remote controller. Some functions can also adjusted with the buttons on the controls on the TV front panel. 12. Remote controller Note !! : Before you use the remote controller, please install the batteries.
1.POWER: Turns the TV on from standby or off to standby mode. 2.MUTE: Turns the sound on and off 3.NUMBER buttons: Select channel numbers. 4.PSM (Picture Status Memory): Recalls your preferred picture setting. 5.SSM (Sound Status Memory): Recalls your preferred sound setting. 6. SAP: Adjusts the MTS-STEREO,MONO,SAP 7.MENU: Displays a main menu. 8.TV / AV: Selects input signal source./ Clears the menu from the screen. 9.OK: Accepts your selection or displays the current mode. 10.CH / (Channel Up/Down): Selects next channel or a OSD menu item. 11.VOL / (Volume Up/Down) Adjusts the sound level. Adjusts menu settings. 12.SLEEP: Sets the sleep timer. 13.TV / PC : Selects TV or PC mode directly. 14.CC: Sets the caption function. 15.LIST: Displays the channel list menu. 16.Q.VIEW: Returns to the previously viewed channel.

PDI-P23LCD SERVICE MANUAL

PAGE:8

LOCATION OF CONTROL
17.ARC You can watch TV in various picture formats; 16:9, 14:9, 4:3, 16:9 Zoom, 14:9 Zoom, 4:3 Zoom. Repeatedly press the ARC button to select your desired picture format. Note: In PC mode only 16:9 and 4:3 sized displays available. 18. INPUT: Selecs the AV source for sub picture in PIP mode. 19.PIP: Displays a PIP(Picture In Picture) screen. The PIP function is available except 480i signal in COMPONENT1 and COMPONENT2 mode. 20. CH: Selects a channel when TV signal is displayed in PIP window mode. 21.POSITION: Selects a position of PIP screen. 22. SWAP: Switches a main picture for sub picture in PIP mode. The PIP screen will disappear after pressing the SWAP button. 22. MODE: Selects a PIP screen size ­ 16:1, 9:1 and 3:1 mode.

PDI-P23LCD SERVICE MANUAL

PAGE:9

LOCATION OF CONTROL
13. Controller of Panel 1. ON/OFF: Switches TV set on or off. 2. MENU : Displays menu. 3~4. CH / : (Channel Up/Down) Selects a channel or a menu item. 5~6. VOL / (Volume Up/Down) Adjusts the volume or menu settings. 7. TV/AV Selects TV, VIDEO, S-VIDEO, RADIO(Only when the Radio is set on), PC Analog, PC Digital, COMPONENT1 or COMPONENT2 Clears the menu from the screen. 8. Remote control sensor Accepts the IR signal of remote controller. 9. Power Indicator IIIuminates in red when the TV is OFF. IIIuminates in green when the TV is ON. IIIuminates in amber when the power save mode is active (only PC mode). mode.

PDI-P23LCD SERVICE MANUAL

PAGE:10

EXTERNAL IN/OUT
14.External IN / OUT

1. PC DIGITAL IN (DVI-D) : Connect the DVI from PC. 2. PC ANALOG IN (D-SUB) Connect the 15pin D-SUB from PC. 3. AV OUT: Connect these outputs to the Audio/Video inputs of extemal equipment. 4. AV IN: Connect the Audio/Video outputs of extemal equipment to these inputs. 5. COMPONENT2 IN: Connect the Y, Pb, Pr signal from DVD or Set Top Box. 6. COMPONENT1 IN: Connect the Y, Pb, Pr signal from DVD or Set Top Box. 7. S-VIDEO IN: Connect the output of the S-VIDEO(Y,C) on the VCR to the S-VIDEO inout. Connect the audio outputs of the S-VIDEO on the VCR to the Audio IN L(MONO),R 8. PC AUDIO IN: Connect the audio cable from the PC to the OC AUDIO IN of the set. 9. AC INLET: Connect the power cable from wall. 10.PILLOW: Pillow Speaker Port. 11. COMM: CCI/Cloner Comm Port. 12. SPK: On Off switch for the intemal TV speakers and H/P jack.

PDI-P23LCD SERVICE MANUAL

PAGE:11

INSPECTION INSTRUCTION
1. Supplied Accessories Note: Make Sure the following accessories are provided with Product. 1. AC Code
..

2. Owner's manual

3.Mounting Brackets &Hardware (Not included with the "-NB" model)

4. Pillow Speaker Jumper (Not included with the "-NB" model)

PDI-P23LCD SERVICE MANUAL

PAGE:12

DEASSEMBLY PROCEDURE
16. Disassembly procedure 1)Removal of Stand emoe 4 screws Remove 4 screws Remove 4 screws Remove 4 screws Remove 4 screws Remove 4 screws Remove 4 screws Remove 4 screws Remove 4 screws Remove 4 screws

Remove 4 screws

2)Removal of Back cover,

(First removal side cover)

Remove 11 screws

PDI-P23LCD SERVICE MANUAL

PAGE:13

DEASSEMBLY PROCEDURE
3)Metal plate & Rear chassis

Remove 8 screws

4)Remove bracket

Remove 4 screws
!

PDI-P23LCD SERVICE MANUAL

PAGE:14

DEASSEMBLY PROCEDURE
5) Disconnect 8 plugs on Main PCB

Remove 8 connector

6) Remove 12 Main & SMPS PCB screws

Remove 11 screws

PDI-P23LCD SERVICE MANUAL

PAGE:15

DEASSEMBLY PROCEDURE
7-1)Removal of LCD module

Remove 8 screws

7-2)Removal of LCD module

Remove 10 screws

PDI-P23LCD SERVICE MANUAL

PAGE:16

DEASSEMBLY PROCEDURE
7-3)Removal of LCD module

After remove front shield

PDI-P23LCD SERVICE MANUAL

PAGE:17

DEASSEMBLY PROCEDURE
7-4) Removal of LCD module

Remove 2 screws

PDI-P23LCD SERVICE MANUAL

PAGE:18

DEASSEMBLY PROCEDURE
7-5) Removal of LCD module

Remove 2 screws

PDI-P23LCD SERVICE MANUAL

PAGE:19

DEASSEMBLY PROCEDURE
7-6)Removal of LCD Module

Front cover remains after removing LCD Module

PDI-P23LCD SERVICE MANUAL

PAGE:20

WIRE DRESSING
1. Wire Dressing Note: Using acetate Tape

PDI-P23LCD SERVICE MANUAL

PAGE:21

WIRE DRESSING
1) Wire Dressing for speaker & Key control. ( No.1, acetate Tape) 2) Wire Dressing for Left speaker & Key control. ( No.2 acetate Tape) 3) Wire Dressing for Right speaker & Key control. ( No.3, acetate Tape)

1

499-004A : 3EA TAPE, ACETATE

2

3

PDI-P23LCD SERVICE MANUAL

PAGE:22

PART APPEARANCE
1.Part appearance

C3875S

A1504S

C102S

Regulator for Tuning Voltage C3198 2N7000

LC33V or LD33V (LD1117)

AP1501

EEPROM 24C16W ,24C02W TTL LOGOC IC 74F08

PDI-P23LCD SERVICE MANUAL

PAGE:23

PART APPEARANCE
1-1. Part appearance

Voltage Detector KIA7027AF

Voltage Detector KIA7042AF

Voltage Reg KIA78L05F

Voltage Reg KIA78L09F

Schottky Rectifier B340 TTL LOGIC IC 74F08

PDI-P23LCD SERVICE MANUAL

PAGE:24

TROUBLE SHOOTING
15.Troble shooting 15-1.No Raster

P803 (pin8~15) : 24V (B/Light Vcc) P803 (pin1) : 5V (B/L ON:5V / Off:0V)

Y

Check P303 (pin26~30) : 12V N
Check IC805 (pin1) IC805 (pin4)

Y Replace LCD Panel.

N
Check FET Q804 (pin source) 24V

Y
: 12V : 0V

Replace IC805

Y
Replace Q804

N N Replace IC801 / ZD804

Replace the internal SMPS power or AC power

PDI-P23LCD SERVICE MANUAL

PAGE:25

TROUBLE SHOOTING
15-2. No Sound & Picture OK

IC601(pin10) = VCC24V

Y

IC601(pin8) = High=mute = Low = on

Y

Check SW751

Y

Check Volume

N
Check Another VCC Line

N
IC101 (pin123,124 L/R) Q104/105(Emmit or)Sound Wave

N
Swich Off

N
Volume UP

N
Replace IC101

15-3. No Operation

No LED Y
Resistance:0 ohm IC804 (pin4) <-> GND

LED blinking Y Check All SCL/SDA SignalLevel = 3.3V N Replace IC101 Y IC01(pin69~75) ScalerCommuni cation Lines) = 3.3V N Replace IC01

Y Replace IC804 / D850

PDI-P23LCD SERVICE MANUAL

PAGE:26

Schematic Diagram

PDI-P23LCD SERVICE MANUAL

PAGE:27

BLOCK DIAGRAM
1. Block Diagram

23F/26H/27K Block Diagram
SPEAKER VCC 24V On/off Dimming control

I N V E R T E R

LCD PANEL AMP
HEADPHONE

Power (Inverter/Scaler/ ADC/VCTI)

PANEL DRIVE LVDS L/R V C T I R G B , H S , V S

H/P AMP L/R

I T U - 6 5 6

VCC 24V Power IIC

IC01 SCALER
DVI Receiver ADC PIP De-Interlacer

IC101 VCTI
u-Com TEXT/Caption Video Processor Sound Processor IF Processor Power IIC

ADC

Power IIC Y P b P r( D - T V ) DC-IN 24V

I F

Y P b P R ( D V D )

Y C

A V - I N / O U T

R G B , F B A V - I N / O U T

D V I - R G B

P C - R G B

DC-IN

DVI-RGB

PC-RGB

Y, Pb, Pr (Y, Cb, Cr) YPbPr(DVD) YPbPr(D-TV)

AV-IN/OUT

YC

IF

DC-IN

DVI

D-SUB

AV-IN/OUT

S-VIDEO

TUNER

PDI-P23LCD SERVICE MANUAL

PAGE:28

PCB LAYOUT
1. CONTROL PCB & PILLOW JACK PCB

1-1.Pillow PCB

1-2.Control PCB (Top pattern) (Top silk) (Bottom pattern) (Bottom silk)

(Top pattern)

(Top silk)

(Bottom pattern)

(Bottom silk)

PDI-P23LCD SERVICE MANUAL

PAGE:29

PCB LAYOUT
2. Main PCB ( TOP PATTERN )

PDI-P23LCD SERVICE MANUAL

PAGE:30

PCB LAYOUT
3. Main PCB (TOP SILK)

PDI-P23LCD SERVICE MANUAL

PAGE:31

PCB LAYOUT
4. Main PCB ( BOTTOM PATTERN )

PDI-P23LCD SERVICE MANUAL

PAGE:32

PCB LAYOUT
4. Main PCB ( BOTTOM SILK)

PDI-P23LCD SERVICE MANUAL

PAGE:33

WAVE FORM
NOTE!!:Video = Gray scale pattern input / Audio = 1Khz input at volume step 20~40.
1)Component Y input, (L207 & R560 MEASURE) (1V-p-p, Input = Vertical color pattern) 2)Component Cb input, (L208 & R262 MEASURE) (0.7V-p-p, Input = Vertical color pattern)

3) Component Cr input, (L209 & R265 MEASURE) (0.7V-p-p, Input = Vertical color pattern)

4) S-video C signal input. (C236 MEASURE)

5) S-video Y signal input.(15.7Khz,1Vp-p) (R519 MEASURE)

6) CVBS Video signal input.(15.7Khz,1Vp-p) (R280 MEASURE)

PDI-P23LCD SERVICE MANUAL

PAGE:34

WAVE FORM
NOTE!!: Video = Gray scale pattern input / Audio = 1Khz input at volume step 40.
7) CVBS Video signal output.(15.7Khz,1Vp-p) (R279 MEASURE) 8) Q105 Emitter (Audio "L" output)

9) Q104 Emitter (Audio "R" output)

10)R132 IR signal input to u-computer.

13) Tuner 33V input (about 32V~34V)

16) C610 & C612 Power AMP Audio L,R output

PDI-P23LCD SERVICE MANUAL

PAGE:35

WAVE FORM
NOTE!!: PC INPUT = 640x480 @ 60Hz Cross hatch pattern.
29) PC-DSUB Hsync input (R705 MEASURE) 28) PC D-SUB Vsync input (R740 MEASURE)

PDI-P23LCD SERVICE MANUAL

PAGE:36

ADJUSTMENT INSTRUCTION WITH DEFAULT FACTORY DATA
1.SVC mode data Adjustment NOTE!! When the EEPROM has been replaced, the SVC data should be restored as the function of individual system and specification. When the EEPROM has been replaced White Blance Checking. [ Enter and exit SVC mode ] Note: into the SVC mode, Initialize with default data. 1) Press 5 Seconds MENU buttons on both TV set and Remote Controller at the same time to get into SVC mode. 2) Press the PR button several times to find SVC Data. 3) Input the corresponding SVC data referring to Table below with the VOL , key. 4) Press TV/AV button to exit SVC mode 1-1. Factory outgoing setting & Initialize with default data (into the SVC mode)]
Main menu (Model) Language Option (TV White Balance) Change value (M) NORTH AME 3EA TV White Balance Sub-menu Option 1 Sub-menu Sub menu Change value

Settings Start PC

ALL Yes M USA No YUV1 EAST EU1 No No Caption 60 No Yes Yes No + 42 + 21 + 26 + 10 + 118 0 No No No No Yes

Option 1

System China/Australia AV1 Text Top VPS/PDC Data Service ATS Delay Time Game DVI DTV QURAN

Audio Options

Audio Options Sub-menu

M BG/I/DK NICAM FM Radio Scart Volume Surround Mute if no carrier High Deviation DUAL MONO STEREO

(DRX) (NVM Edit) (Hotel Option) (Reset TV-set)

(Sub-menu) (Sub-menu) (Sub-menu) (Sub-menu)

Warning: Do not adjust the "(
PDI-P23LCD SERVICE MANUAL

)" item...
PAGE:37

ADJUSTMENT INSTRUCTION WITH DEFAULT FACTORY DATA 2. White Blance Checking

1.RF when it presses a SVC height from the screen , with the SVC Mode Main screen movement - Panel23 : SSLTA230W1L02 - Language Options : NORTH AME 3EA - Model : M

2. Option1 System : M USA Text : EAST EU1

3. It presses the Menu of the remote control , with the SVC Mode Main screen movement

4. TV White Balance Setting : All Start
PDI-P23LCD SERVICE MANUAL

5. TV White Balance Setting

6.Completion of white balance setting

7.SVC Mode Settingfinish The TV/AV bu

PAGE:38

PACKING INSTRUCTION
NO 1 2 3 4 5 6 P ART NO 321-008A 310-025E , F 300-011W 499-002A DE S CRI P T I O N 23" LCD CO LO R T V B A G P A CK I NG P A CK I NG L, R B O X CA RT O N A CCE S S O RY T APE O PP M AT E RKAL PE EPS PAPER 70m m CO L O R W HI T E Q 'T Y 1 1 1 1 1 3000m m

3

2

4 1

5 6

M AT ER IAL T H IS T R EAT M EN T M O D EL LT 23Q 5LF

D AT A 2005. 09. 13 EN G R D . H . KIM GH K APPD

T IT LE

S E T P a c k in g E x p lo d e d D ra wg
D R AW IN G N O .

MA 0 5 - 0 1 7
SC ALE SH EET 1/1

PDI-P23LCD SERVICE MANUAL

PAGE:39

MECHANICAL EXPLODED VIEW
1. Explode View
NO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 PART NO 610-005C 400-002E 404-001B 408-002J AYMALT41-103 PANLT230W010 407-006F 407-011E 407-007C AYMALT41-401 620-005G 407-007D 407-006K 450-006K AYMALT41-202 AYMALT41-203 401-003T 450-007B 401-004K 450-006U 450-007C 402-001S 401-003V 401-003U 496-001U 410-001Q 410-001L 410-008D 410-008C 410-008E 410-001N 410-001R SCREW MACHINE SCREW TAPPING DESCRIPTION SPEAKER FRONT COVER BLOCK KNOB LENS SENSOR CONTROL PCB ASS'Y PANEL SHIELD SUPPORT SHIELD FRONT SHIELD BRKT MAIN PCB ASS'Y AC/DC ADAPTER SHIELD REAR SHIELD JACK REAR PLATE (D-SUB) ISP PCB ASS'Y SIDE PCB ASS'Y SIDE COVER SIDE PLATE BACK COVER REAR PLATE (SCART) REAR PLATE (ISP,COMM) STAND BASE BRKT STAND BRKT BOTTOM RUBBER FOOT ABS PVC ABS PVC PVC ABS EGI EGI Ø20, 1.0t BTB 4*12 TTB 3*10 FHTTB 4*25 FHTTB 4*8 FHM 4*8 FTB 3*6 PB 4*8 BLACK SZN SZN SZN SNI SZN SZN SZN DARK GRAY BLACK DARK GRAY BLACK BLACK DARK GRAY SAMSUNG EGI EGI EGI PAL/SECAM INTERNAL SMPS EGI SPTH PVC SILVER BLACK MATERIAL 5W, 8 ABS ABS PC COLOR SILVER
SILVER

Q'TY 2 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1
1

TRANSPARENCE

20 26 19 31 15 21 13 12 31 11 31 32 26 14

1 1 1 1 4 29 5 4 6 8 29 8

18 17 16 31

22 10 8 9 31 7 31 26 6 27 4 2 26 3 1 5 29 25 24 31 30 23 28

MATERIAL THIS TREATMENT MODEL PDI-P23LCD LT23Q5LF

DATA 2005. 09. 13 ENGR D. H. KIM GHK APPD

TITLE

SET Exploded Draw ing
DRAWING NO.

MA05-016
SCALE SHEET 1/1

PDI-P23LCD SERVICE MANUAL

PAGE:40

REPLACEMENT PART LIST
1.Parts List (Assemble process)
LEVEL 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 PART NO 300-003J 300-011B 310-014A 310-014B 320-001A 321-008A 404-004A 407-004F 407-004X 407-004Z 407-005E 410-001K 410-001L 410-001N 410-001Q 410-002R 410-002Z 499-002A 500-022M 501-001B 501-0030 501-017D 501-102L 502-0010 509-011W 510-004A 507-001A 520-001A 610-005C 620-004C 621-001G 626-001A 627-001A CON05P200ABH CON02P200A0S CON03P200A01 CON07P200AD3 CON12P200ACF CON20P125ADH PANLC230W010 AYBCLT23B01A AYCALT23A01A AYSTLT23A01A AYMALT41F01A AYCOLT40A01A PART NAME 201/23 F MODEL 23F/N COM,NO SPEC 23" F/N MODEL COMMON 23" F/N MODEL COMMON ACCESSORY PACKING 23 SET PACKING F/N, L/KEY,Chromium 23,FIX BRKT,4-03-006 VCTI-23F,SHIELD JACK VCTI-23F,SHIELD REAR VCTI-23F,LG/IPS TTB 3*8 TTB 3*10 FTB 3*6 BTB 4*12 PP 4*12 PB 3*10 W:70mm 23FLF,4LANG,DIBOSS ENGLISH , SILVER/BLACK 23"DIBOSS 34mm LT-23FLF,NEW DIBOSS ALL MODEL D.BOSS (wing),93mm 30.1",EU,(PR) PANEL FILM FIX 1.5V, AAA SIZE 5W, 8 OHM 24V, 5.42A, 1.8M 220V,SWISS,KKP-4819S IVORY, 1.8M, 15-PIN 1.8M, BK 301 LED,5P 200MM H/H 2627,SPK,2P,600MM 2627,SPK,3P,600MM 27K,7P-10P,1000 CTRL 23,INVETE,12P 160MM 23,Panel,20P,200MM 23", LC230W01-A2-A VCTI23,F-MODEL,SCART 23", F-MODEL, (PR) 23" F-MODEL 23F,VCT-I,SCART VCTI N/F CONTROL DESCRIPTION BOX, ACCESSORY BOX, GIFT PACKING, LEFT PACKING, RIGHT BAG, VINYL BAG, PACKING BLOCK KNOB FIX BRKT SHIELD, JACK(SCART) SHIELD, REAR SHIELD, FRONT SCREW SCREW SCREW SCREW SCREW SCREW TAPE, OPP OWNERS MANUAL LABEL, WARNING LABEL, SERIAL STICKER, LOGO LABEL, ID LABEL, BOX ID LABEL, BRAND REMOCON() LABEL, PROTECTIVE BATTERY SPEAKER AC/DC ADAPTER POWER CORD CABLE, PC RGB CABLE, PC-SOUND LEAD ASSY(SENSOR) LEAD ASSY(SPK) LEAD ASSY(SPK) LEAD ASSY(CTRL) LEAD ASSY(INV) LEAD ASSY(LVDS) PANEL, LCD COLOR REAR, COVER ASSY CABINET ASSY STAND ASSY MAIN PCB ASSY CONTROL PCB ASSY Q,TY 1 1 1 1 1 1 1 4 1 1 1 6 9 16 16 4 4 3000 1 1 1 1 1 1 2 1 4 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

PDI-P23LCD SERVICE MANUAL

PAGE:41

REPLACEMENT PART LIST
2. Parts List (Main PCB)
LEVEL 0 1 2 1 2 2 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 PART NO AYMALT41F01A GRLT41DM001B 0JASCART000D GRLT41DA001B 0CESS100CMTR 0CESS220CMTR GRLT41DS001B 0CHSS080DCTS 0CHSS101DJTS 0CHSS104DZTS 0CHSS471DJTS 0LHSS120EJTS 0RHSS000DJTS 0RHSS102DJTS 0DHKEKDS226S 0RHSS103DJTS 0RHSS182DJTS 0RHSS220DJTS 0RHSS273DJTS 0RHSS393DJTS 0RHSS471DJTS 0RHSS513DJTS 0RHSS750DJTS 0RHSS821DJTS 0TRKE1504STS 0TRKE3875STS 1DZSC5231BTS GRLT41DM001A 0CESH471FHBD 0CESH471FMBD 0ISSY32P00BD 1ICSY49F040D 0ICKE78080AD 0JADM15RF00D 0JAGE14060BD 0JAKKST215BD 0JAPK6046GBD 0JASYDC4P0BD 0JASYDVI29BD 0LRSM00100BD 0XTKI143180D 0XTKI202500D AYHSAP1501BD 1ICIPAP5T5TD 410-001J 420-001F 498-001A AYHSLA4282IB 1ICSA42820AD 410-001J 420-001A 498-001A WAFLG04250SD WAFML07200AD WAFYH02200SD WAFYH03200SD WAFYH10200SD PART NAME MAIN PCB ASS'Y GR, SCART MANUAL JACK, SCART GR, SCART AUTO CESSL1C100M0511AD CESSL1C220M0511AD GR, SCART SMD 8P CL10C101JBNC CL10F104ZANC CL10C471JBNC INDUCTOR, CHIP RC1608J000CS RC1608J102CS KDS226, DIODE RC1608J103CS RC1608J182CS RC1608J220CS RC1608J273CS RC1608J393CS RC1608J471CS RC1608J513CS RC1608J750CS RC1608J821CS KTA1504S Y C3875 MMSZ5231BS GR, COMMON MANUAL CAPACITOR, ELEC. CAPACITOR, ELEC. SOCKET, IC IC, MICOM KIA7808AP JACK, D-SUB JACK, SOUND ST-215 S-VHS, PJ6046G JACK, DC-POWER JACK, DVI-CON SMC103 CRYSTAL, RADIAL CRYSTAL, RADIAL AP1501A-50T5,25*16 IC, DC/DC CONVERTER PB 3*8 15*25 LA4282, 42*16 LA4282, SANYO PB 3*8 LA4282 42*16 GIL-G-4P-S3T2 53015-0710 SMW200-02 SMW200-03 WAFER, PIN DESCRIPTIONS LT-23FLF RGB21PIN,VP 381-091B Capacitor, AL.E 10UF 16V Capacitor, AL.E 22UF 16V Capacitor, chip 8PF Capacitor, chip 100PF Capacitor, chip 0.1UF Capacitor, chip 470PF 12UH, 2012 Resistor, chip 0 ohm Resistor, chip 1K Diode, chip KDS226 Resistor, chip 10K ohm Resistor, chip 1.8K ohm Resistor, chip 22 ohm Resistor, chip 27K Resistor, chip 39K ohm Resistor, chip 470 ohm Resistor, chip 51K Resistor, chip 75 ohm Resistor, chip 820 ohm Transistor, chip A1504 Transistor, chip C3875 Zener diode, chip 5.1V 470UF 35V, 105 470UF 35V DIP 32P ATMEL AT49F040 IC, KIA7808 DAH-15RF-4B4 RCA-1406(W/R) 2 Jack, PC-AUDIO JACK, S-VHS 4P POWER DVI-CON Inductor, 1MH 14.318MHZ Crystal, 20.25MHZ HEAT SINK ASSY AP1501A-50T5,5V,5A SCREW HEAT SINK(25mm) Silicon Grease HEAT SINK ASSY IC, SOUND AMP SCREW HEAT SINK Silicon Grease Pin wafer, 4-PIN Wafer, 7-PIN Pin wafer, 2-PIN Pin wafer, 3-PIN 10P, P2.0mm STRAIGHT LOCATION NO J401,J403 C240,C241 C207,C208 C202 C203,C212,C214 C242 C209,C210 L205,L206,L202 R231,R269,R271,R272 R210 D252 R243 R240 R211,R212,R213 R242 R219 R205,R241 R220 R206,R208,R209,R214 R215,R216 R244 Q201 Q202 ZD201,ZD203,ZD204,ZD206 ZD208 C613 C832,C837,C851,C610 C612,C827,C836,C850 IC109 IC109 IC800 J202 J405 J601,J602 J406 J801 J201 L802 X01 X100 IC804

IC601

P110,P101 P111 P601 P602 P115

PDI-P23LCD SERVICE MANUAL

PAGE:42

REPLACEMENT PART LIST
3. Parts List (Main PCB)
LEVEL PART NO GRLT41DA001A 1 2 0CESS100HMTR PART NAME GR, COMMON AUTO CAPACITOR, ELEC. DESCRIPTIONS LOCATION NO C108,C173,C174,C216,C2 19 C239,C253,C254,C80,C81 C82,C83,C84,C86,C87 C01,C601,C603,C607,C61 7 C839 C618 C534,C222,C227 C175,C190 C178,C179,C187,C602,C6 06 C165 C121,C151,C251,C535,C8 44 C160,C169,C170,C185,C3 C614 C106,C197,C807,C858,C859 C608,C609,C611,C806,C817 C604,C605 L807,L808 L102,L150,L160,L167,L168 L171,L172,L173,L175,L176 L177,L198,L199 R48 D801 ZD802 Q120,Q121
C215.C255 C702,C703 C155,C156,C211,C213,C218 C221,C224,C226,C229,C232 C233,C256,C857 C112,C113,C114,C115,C149 C150 C192,C193,C507,C509,C511 C513,C515,C517 C191,C02,C03,C04,C05 C06,C09,C10,C107,C109 C11,C12,C120,C124,C128 C133,C136,C137,C138,C142 C147,C148,C152,C158,C159 C161,C162,C163,C166,C171 C172,C180,C181,C182,C183 C184,C186,C195,C196,C217 C236,C250,C252,C27,C28 C29,C30,C301,C31,C32 C33,C34,C35,C37,C38 C62,C65,C68 C235 C07,C08 C616,C621

10UF 50V

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1
2 2 2 2 2

0CESS101CMTR 0CESS101EMTR 0CESS010HMTR 0CESS220CMTR 0CESS221AMTR 0CESS2R2HMTR 0CESS3R3HMTR 0CESS470CMTR 0CESS470FMTR 0CESS4R7HMTR 0CQSS104KKTR 0CQSS682KKTR 0LBSS3580RTR 0LRSU220KKTR 0RNSS391FFTA 1DDSKEU1Z0TA 1DZSSHZT33TA 1ICFC2N700TR GRLT41DS001A
0CHSS080DCTS 0CHSS100DJTS 0CHSS101DJTS 0CHSS102DKTS 0CHSS103DKTS

CAPACITOR, ELEC. CAPACITOR, ELEC. 1UF 50V CESSL1C220M0511AD CAPACITOR, ELEC. CAPACITOR, ELEC. CAPACITOR, ELEC. CESSL1C470M0511AD CAPACITOR, ELEC. 0CESS4R7HMTR CAPACITOR, MYLER CAPACITOR, MYLER BFD-3580R2F INDUCTOR Resistor, Axial DIODE, RECTIFIER DIODE, ZENER AXIAL 2N7000TA GR, COMMON SMD
8PF,1608 CAPACITOR, CHIP CL10C101JBNC CL10B102KBNC CL10B103KBNC

Capacitor, 100UF 16V 100UF 25V CAPACITOR, ELEC. Capacitor, 22UF 16V 220UF 10V Capacitor, 2.2UF 50V Capacitor, 3.3UF 50V Capacitor, 47UF 16V 47UF 35V Capacitor, 4.7UF 50V 0.1UF 100V 0.0068UF 100V Bead, radial 1UH 22U/RAD,5MM RADIAL 390 ohm 1/6W, 1% FAST RECVRY, 200V 33V IC, 2N7000
CAPACITOR, CHIP Capacitor, chip 10PF,1608 Capacitor, chip 100PF Capacitor, chip 1000PF Capacitor, chip 0.01UF

2

0CHSS104DZTS

CL10F104ZANC

Capacitor, chip 0.1UF

2 2 2 2

0CHSS105DZTS 0CHSS150DJTS 0CHSS220DJTS 0CHSS222DKTS

CAPACITOR, CHIP 15PF,1608 CL10C220JBNC CAPACITOR, CHIP

1UF,1608 CAPACITOR, CHIP Capacitor, Chip, 22PF Capacitor, chip 2200PF,1608

PDI-P23LCD SERVICE MANUAL

PAGE:43

REPLACEMENT PART LIST
4. Parts List (Main PCB)
LEVEL
2 2 2 2 2 2 2 2 2 2 2 2 2 2

PART NO
0CHSS224DZTS 0CHSS330DJTS 0CHSS331DJTS 0CHSS334DZTS 0CHSS471DJTS 0CHSS473DKTS 0DHKEKDS181S 0DHKEKDS226S 0DSSCB340ATS 0ICHNV8100BS 0ICKE7027FTS 0ICKE78L9FTS 0ICVI4925DTS 0LBSS101DJTS

PART NAME
CAPACITOR, CHIP CL10C330JBNC CL10C331JBNC CAPACITOR, CHIP CL10C471JBNC CL10B473KANC KDS181, DIODE KDS226, DIODE DIODE, SCHOTTKY CHIP IC, SDRAM CHIP KIA7027AF KIA78L09F IC, MOSFET CHIP BEAD, CHIP

DESCRIPTIONS
Capacitor, chip 0.22UF Capacitor, Chip, 33PF Capacitor, chip 330PF Capacitor, chip,0.33UF,1608 Capacitor, chip 470PF Capacitor, chip 0.047UF Diode, chip KDS181 Diode, chip KDS226 B340A, 3A 128K x 8bit, SRAM, 70ns IC, KIA7027 IC, KIA78L09F DUAL P-CHANNEL 30V MOSFET 100 OHM, 2012

LOCATION NO
C139,C622 C145,C146,C234,C94 C153,C154 C116,C117,C118,C119,C131 C132,C526,C527,C528,C529 C530,C531,C532,C533 C200,C201,C205,C206,C220 C223,C225,C228,C230,C231 C13,C14,C15,C16,C17 C18,C19,C20,C21,C22 C23,C24,C25,C26 D01,D250,D251,D601,D602 D110 ZD804 IC105 IC104 IC503 IC805,IC821 L15,L16,L17,L18,L19 L20,L21,L22,L701,L702 L703 L01,L02,L03,L04,L05 L07,L08,L09,L10,L104 L11,L12,L13 L200,L201,L203,L204,L212 L213,L214,L215,L216,L217 L218,L219,L220,L221,L222 L810,L850 C135,R06,R07,R09,R10 R108,R109,R11,R110,R118 R12,R127,R128,R13,R14 R15,R152,R16,R161,R164 R165,R166,R167,R178,R179 R18,R180,R185,R188,R19 R196,R197,R198,R199,R224 R225,R238,R239,R251,R27 R30,R40,R41,R42,R545 R548,R549,R55,R552,R66 R67,R68,R69,R700,R721 R722,R723,R833,R83,R84 R85 R157,R602,R617,R601,R603 R168 R08,R105,R106,R107,R130 R131,R132,R133,R135,R137 R138,R139,R140,R141,R142 R143,R145,R146,R147,R148 R149,R150,R151,R153,R162 R163,R17,R194,R195,R288 R289,R291,R292,R293,R294 R295,R296,R297,R298,R36 R52,R59,R60,R609,R635 R703,R711,R718,R719,R91 R117,R254,R518,R628,R631 R712,R713,R717,R839 R189,R190,R232,R233,R234 R235,R236,R237,R255,R256 R278,R290,R613,R627,R629 R630,R636,R704,R705,R706 R707,R72,R836,R837,R846 R841,R842,R845

2

0LBSS601FJTS

BEAD, CHIP

600 OHM, 3216

2 2

0LHSS120EJTS 0LRSL10100BS

INDUCTOR, CHIP 33UH, SMD12128.5

12UH, 2012 INDUCTOR

2

0RHSS000DJTS

RC1608J000CS

Resistor, chip 0 ohm

2 2

0RHSS000EJTS 0RHSS100DJTS

RC2012J000CS RC1608J100CS

Resistor, chip 0 OHM Resistor, chip 10 ohm

2

0RHSS101DJTS

RC1608J101CS

Resistor, chip 100 ohm

2

0RHSS102DJTS

RC1608J102CS

Resistor, chip 1K

2

0RHSS103DJTS

RC1608J103CS

Resistor, chip 10K

PDI-P23LCD SERVICE MANUAL

PAGE:44

REPLACEMENT PART LIST
5. Parts List (Main PCB)
LEVEL
2 2 2 2 2 2 2

PART NO
0RHSS104DJTS 0RHSS105DJTS 0RHSS122DJTS 0RHSS123DJTS 0RHSS151DJTS 0RHSS153DJTS 0RHSS182DJTS

PART NAME
RC1608J104CS RESISTOR, CHIP RC1608J122CS RESISTOR, CHIP RC1608J151CS RESISTOR, CHIP RESISTOR, CHIP

DESCRIPTIONS
Resistor, chip 100K 1M OHM, 1608 J Resistor, chip 1.2K 12K OHM, 1608 J Resistor, chip 150 ohm 15K OHM, 1608 J Resistor, chip 1.8K ohm

LOCATION NO
R620,R621,R632,R633,R637 R802,R808,R821 R02 R809 R838 R100,R101,R102,R113,R114 R115 R618,R623 R276 R04,R05,R111,R120,R129 R154,R155,R169,R170,R192 R193,R252,R253,R32,R33 R34,R44,R50,R56,R57 R701,R702,R80,R81,R82 R156 R103,R104,R116 R112,R204 R260,R274,R803,R816,R818 R03,R134,R247,R248,R249 R541,R542 R124,R125 R619,R622 R43 R610,R611 R257,R258 R275,R280,R519,R844 R119,R121,R122,R123,R843 R181,R182,R183,R184,R207 R246,R26,R530,R607,R612 R709,R710,R720,R819 R126,R187,R245,R615,R626 R817 R202,R203 R191,R200,R201,R217,R218 R282,R283,R284,R285 R61 R604,R608,R515,R516 R624,R625 R614 R227,R228,R279,R281,R286 R287,R714,R715,R716 R277 R229 AR09,AR10 AR01,AR02,AR03 AR13,AR14,AR15,AR16,AR17 AR18,AR19,AR21,AR22,AR23 AR24,AR25 Q100,Q101,Q103,Q601,Q203 Q603,Q104,Q105 Q01,Q102,Q11,Q204,Q198 Q205,Q210,Q602,Q604,Q800 Q802,Q803,Q812,Q813 D850 D700,D701,ZD191,ZD192,ZD202 ZD205,ZD207,ZD209,ZD213,ZD214 ZD215,ZD216,ZD217,ZD218,ZD219 ZD220,ZD221,ZD222,ZD225,ZD601 ZD602,ZD702,ZD703,ZD704,ZD705 ZD706,ZD805,ZD806

2

0RHSS220DJTS

RC1608J220CS

Resistor, chip 22 ohm

2 2 2 2 2 2 2 2 2 2 2 2

0RHSS223DJTS 0RHSS271DJTS 0RHSS272DJTS 0RHSS273DJTS 0RHSS332DJTS 0RHSS392DJTS 0RHSS393DJTS 0RHSS3R0DJTS 0RHSS3R3DJTS 0RHSS470DJTS 0RHSS471DJTS 0RHSS472DJTS

RC1608J223CS RC1608J271CS RC1608J272CS RC1608J273CS RC1608J332CS RC1608J392CS RESISTOR, CHIP RESISTOR, CHIP RC1608J3R3CS RESISTOR, CHIP RC1608J471CS RC1608J472CS

Resistor, chip 22K Resistor,chip 270 Resistor, chip 2.7K Resistor, chip 27K Resistor, chip 3.3K Resistor, chip 3.9K Resistor, chip 39K 3 OHM, 1608 J Resistor, chip 3.3 OHM Resistor, chip 47 ohm Resistor, chip 470 ohm Resistor, chip 4.7K

2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

0RHSS473DJTS 0RHSS474DJTS 0RHSS512DJTS 0RHSS560DJTS 0RHSS561DJTS 0RHSS622DJTS 0RHSS683DJTS 0RHSS750DJTS 0RHSS821DJTS 0RHSS912DJTS 0RYSS101FJTS 0RYSS101FJTS 0RYSS220FJTS 0TRKE1504STS 0TRKE3875STS 1DHSTS1545GS

RC1608J473CS RC1608J474CS 5.1K OHM, 1608 J RESISTOR, CHIP RC1608J561CS 6.2K OHM, 1608 J 68K OHM, 1608 J RC1608J750CS RC1608J821CS 9.1K OHM 1608, J RESISTOR, ARRAY CHIP RESISTOR, ARRAY CHIP RESISTOR, ARRAY KTA1504S Y KTC3875S Y DIODE, RECTIFIER

Resistor, chip 47K Resistor, chip 470K RESISTOR, CHIP 56 OHM, 1608 J Resistor, chip 560 ohm RESISTOR, CHIP RESISTOR, CHIP Resistor, chip 75 ohm Resistor, chip 820 ohm RESISTOR, CHIP 100 OHM, 3216 100 OHM, 3216 22 OHM, *8 J Transistor, chip A1504 Transistor, chip D2PAK, 45V 15A

2

1DZSC5231BTS

DIODE, ZENER CHIP

5.1V, MMSZ5231BS-7

PDI-P23LCD SERVICE MANUAL

PAGE:45

REPLACEMENT PART LIST
6. Parts List (Main PCB)
LEVEL 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 2 2 2 2 1 2 1 2 2 1 2 1 2 2 2 2 2 2 2 PART NO 1ICIPAP120TS 1ICMS9883CBS 1ICMST6151BS 1ICPH74F08TS 1ICPH8574ATS 1ICRO6161FTS 1ICSE24C16TS 1ICST24C02WS 1ICST6420DTS 1ICST80PF55S 1ICSTLD18TTS 1ICSTLD33TTS 1ICSTTS482TS 0CHSS472DKTS 1ICWB986532S 1ICMI49XYIC7 GRLT41CM001F 0TULGG083DBD 111-A46A 1SFEPX6966MD WAFYH10200AD GRLT41AM001H 1TPMU40R9MTD GRLT41DS001G 0TRKE3875STS 0RHSS472DJTS GRLT41DM001F
WA1YH12200SD

PART NAME IC, DC/DC CONVERTER MST9883C MST6151 N74F08D PCF8574,REMOTE 8-BIT BA6161F S-24C16AFJA-TB IC, EEPROM TEA6420D STB80PF55 Regulator(STM) Regulator(STM) IC, HEADPHONE AMP CAPACITOR, CHIP IC, SDRAM CHIP IC,V/S DECODER GR, 201 CMO TUNER M/I TAEM-G083D 20.1",VCT-I X6966M WAFER, PIN GR, LL' MANUAL TRAP,40.9MHZ GR, LL' SMD TRANSISTOR, CHIP RC1608J472CS GR, PANEL MANUAL(LG)
WAFER, PIN

DESCRIPTIONS AP1501A-12K5,12V,5A MST9883C IC, SCALER IC, N74F08D IC, I/O EXPANDER IC, BA6161F IC, 24C16 24C02W TEA6420D STB80PF55 LD1117S18TR LD1117S33TR TS482IST, MINI08 4700PF,1608 512Kx32bitx4 SDRAM VCTI, 49XYI-C7 Tuner PCB, IF SAW FILTER Pin wafer, 10-Pin MKTGA40M9AAHP00A03 KTC3875S Resistor, chip 4.7K
12P, STRAIGHT Capacitor, chip 100PF Capacitor, chip 0.1UF Resistor, chip 0 ohm Resistor, chip 0 OHM Resistor, chip 10K Resistor, chip 47K 30P, P125, ANGLE

LOCATION NO IC801 IC04 IC01 IC702 IC202 IC803 IC103 IC201,IC701 IC504 Q804 IC832 IC05,IC06,IC08 IC107,IC108 IC602 C249,C257,C259 IC03 IC101

SF101 P102 T101 Q106 R177 P803
C846 C845,C847 R824 R823 R825 R826 P303

GRLT41DS001F
0CHSS101DJTS 0CHSS104DZTS 0RHSS000DJTS 0RHSS000EJTS 0RHSS103DJTS 0RHSS473DJTS WAFYH30125AS

GR, PANEL SMD(LG)
CL10C101JBNC CL10F104ZANC RC1608J000CS RC2012J000CS RC1608J103CS RC1608J473CS WAFER, PIN

PDI-P23LCD SERVICE MANUAL

PAGE:46

CIRCUIT DESCRIPTIONS
General Description for 23.01" color TFT LCD TV. The TFT LCD TV described in the followings is based on a Multi TV system, digital Control display, 23.01" diagonal. The TFT LCD TV is intended to be a finished product, Basically a display device mounted inside an enclosure which will provide the safety Requirements. With the exception of LCD Panel, the display device shall be composed entirely of solid state components. These components shall have a history of reliable service in identity applications and shall be applied in the circuits.

1. SCALER SECTION. 2. VCT 49xxi SECTION. 3. Video A/D Converter

PDI-P23LCD SERVICE MANUAL

PAGE:47

CIRCUIT DESCRIPTIONS
1.SCALER SECTION. Device : MST6151 Features: Input supports up to UXGA & 1080P Panel supports up to SXGA/WXGA Integrated two-port triple-ADC/PLL Integrated DVI/HDCP compliant receiver YUV422 digital video input ports Dual high-quality scaling engines Built-in 3-D video de-interlacer Video-over-graphic PIP Video-by-graphic split screen MStarACE advanced picture/color processing engine Embedded On-screen Display Controller (OSD) engine Built-in dual-link LVDS transmitter 5-Volt tolerant inputs Low EMI and power saving features Supports PWM & GPO controls 208-pin PQFP package Analog RGB/YPbPr Input Ports DVI/HDCP Compliant Input Port Video Input Port Auto-Configuration/Auto-Detection Dual High-Performance Scaling Engines Video Processing & Conversion On-Screen OSD Controller 1) Description The MST6151 is a high performance and fully integrated graphics processing IC solution for multi-function LCD monitor/TV with resolutions up to SXGA/WXGA. It is configured with an integrated triple-ADC/PLL, an ntegrated DVI/HDCP receiver, a video de-interlacer, two high quality scaling engines, an on-screen display controller, and a built-in output clock generator. By use of external frame buffer, PIP is provided for multimedia applications. It supports de-interlaced full-screen video, video-on-graphic overlay, video-by-graphic split screen, frame rate conversion, and aspect ratio conversion for various video sources. To further reduce system costs, the MST6151 also integrates intelligent power management control capability for green-mode requirements and spread-spectrum support for EMI management.

PDI-P23LCD SERVICE MANUAL

PAGE:48

CIRCUIT DESCRIPTIONS
2) Block Diagram.

PDI-P23LCD SERVICE MANUAL

PAGE:49

CIRCUIT DESCRIPTIONS
3) Pin configuration. Reference line

The left side

The right side

PDI-P23LCD SERVICE MANUAL

PAGE:50

CIRCUIT DESCRIPTIONS
3-1) Pin configuration < The left side >

PDI-P23LCD SERVICE MANUAL

PAGE:51

CIRCUIT DESCRIPTIONS
3-2) Pin configuration < The right side >

PDI-P23LCD SERVICE MANUAL

PAGE:52

CIRCUIT DESCRIPTIONS
4) Pin Functions.
[MCU Interface]

[Analog Interface]

PDI-P23LCD SERVICE MANUAL

PAGE:53

CIRCUIT DESCRIPTIONS

[DVI Interface]

[Video Interface]

[LVDS Interface]

PDI-P23LCD SERVICE MANUAL

PAGE:54

CIRCUIT DESCRIPTIONS

[GPO Interface]

[DRAM Interface]

PDI-P23LCD SERVICE MANUAL

PAGE:55

CIRCUIT DESCRIPTIONS
[Misc. Interface]

[Power Pins]

[No Connects]

PDI-P23LCD SERVICE MANUAL

PAGE:56

CIRCUIT DESCRIPTIONS
2. VCT 49xxi SECTION. Device : VCT 49xxi Features : PSSDIP88-1/-2 package PMQFP144-2 package Submicron CMOS technology Low-power standby mode Single 20.25-MHz reference crystal 8-bit 8051 instruction set compatible CPU Up to 256 kB on-chip program ROM WST, PDC, VPS, andWSS acquisition Closed Caption and V-chip acquisition Up to 10 pages on-chip teletext memory Multi-standard QSS IF processing with single SAW FM Radio and RDS with standard TV tuner TV-sound demodulation: Baseband sound processing for loudspeaker channel: CVBS, S-VHS, YCrCb and RGB inputs 4H adaptive comb filter (PAL/NTSC) multi-standard color decoder (PAL/NTSC/SECAM) Nonlinear horizontal scaling "panorama vision" Luma and chroma transient improvement (LTI, CTI) Non-linear color space enhancement (NCE) Dynamic black level expander (BLE) Scan velocity modulation output Soft start/stop of H-drive Vertical angle and bow correction Average and peak beam current limiter Nonlinear and dynamic EHT compensation Black switch off procedure (BSO)

1) Description The VCT 49xxI is an IC family of high-quality singlechip TV processors. Modular design and deep-submicron technology allow the economic integration of features in all classes of singlescan TV sets. The VCT 49xxI family is based on functional blocks contained and approved in existing products like DRX 396xA, MSP 34x5G, VSP 94x7B, DDP 3315C and SDA 55xx. Each member of the family contains the entire IF, audio, video, display, and deflection processing for 4:3 and 16:9 50/60-Hz mono and stereo TV sets. The integrated microcontroller is supported by a powerful OSD generator with integrated Teletext & CC acquisition including on-chip page memory.

PDI-P23LCD SERVICE MANUAL

PAGE:57

CIRCUIT DESCRIPTIONS
2) Block Diagram.

PDI-P23LCD SERVICE MANUAL

PAGE:58

CIRCUIT DESCRIPTIONS
3) Pin configuration.

Reference line The left side The right side

PDI-P23LCD SERVICE MANUAL

PAGE:59

CIRCUIT DESCRIPTIONS
3-1) Pin configuration < The left side >

PDI-P23LCD SERVICE MANUAL

PAGE:60

CIRCUIT DESCRIPTIONS
3-2) Pin configuration < The right side >

PDI-P23LCD SERVICE MANUAL

PAGE:61

CIRCUIT DESCRIPTIONS
4) Pin Connections and Short Descriptions NC = not connected LV = if not used, leave vacant OBL = obligatory; connect as described in circuit diagram IN = Input Pin OUT = Output Pin SUPPLY = Supply Pin 4-1) Pin(Port) Functions

PDI-P23LCD SERVICE MANUAL

PAGE:62

CIRCUIT DESCRIPTIONS
4-2) Pin(Port) Functions

PDI-P23LCD SERVICE MANUAL

PAGE:63

CIRCUIT DESCRIPTIONS
4-3) Pin(Port) Functions

PDI-P23LCD SERVICE MANUAL

PAGE:64

CIRCUIT DESCRIPTIONS
4-4) Pin(Port) Functions

PDI-P23LCD SERVICE MANUAL

PAGE:65

CIRCUIT DESCRIPTIONS
4-5) Pin(Port) Functions

PDI-P23LCD SERVICE MANUAL

PAGE:66

CIRCUIT DESCRIPTIONS
3. Video A/D Converter Device: Features: MST9883CR. *Triple ADC with 12 - 140 MHz Sampling Rate *Integrated line locked PLL generates pixel clock from HSYNC *Integrated 5-bit pixel clock phase adjustment for precise sample timing control *Integrated clamp with timing generator *Integrated Brightness & Contrast controls *Integrated precision voltage reference *Compatible with VGA through SXGA RGB graphics signals, and component TV, DTV and HDTV *Pin Compatible with AD9883A *Serial port programming interface *Mid-Scale Clamping *Fully Sync Processing *4:2:2 and 4:4:4 Output Format Mode *Color space conversion (RGB to YCbCr) *Internal pattern generator* *Sawtooth vertical deflection signals for VSYNC input* *BT656 output format mode* *Black and mid-level precision clamp and calibration* *Please see MST9883C Application Note for details.RGB Graphics Processing (A/D Converter).

1) Description Most flat-panel monitors and projectors require a digital graphics input in order to accurately scale and display graphics. The huge installed base of computers with analog video graphics interfaces necessitates the use of a graphics digitizer to re-digitize the analog RGB signal before further processing. The MST9883CR is a fully integrated analog interface for digitizing high-resolution RGB graphics signals from PC's and workstations. With a sampling rate capability of up to 140 MHz, it can accurately support display resolutions up to 1280x1024 (SXGA) at 75 Hz. The clamped input circuits provide sufficient band width to accurately digitize each pixel. The MST9883CR provides a high performance highly integrated solution to support the digitization process, including the ADC's, a voltage reference, a PLL to generate the pixel sampling clock from HSYNC, clamping circuits, and programmable offset and gain circuits to provide brightness and contrast controls. When the COAST signal is asserted, the PLL will maintain its output frequency when HSYNC pulses are absent, such as during the VSYNC period in some systems. A 32-step programmable phase adjustment control (0-360 deg) is provided for the pixel sampling clock to adjust for the difference between the HSYNC edge and RGB pixel edge timing. The MST9883CR can send output data through one 24-bit port at the pixel clock rate. The MST9883CR can also support RGB to YCbCr conversion. The MST9883CR has internal programmable pattern generator for testing. The MST9883CR can accept either standard TTL, CMOS levels or sawtooth vertical deflection signals for VSYNC input.
PDI-P23LCD SERVICE MANUAL PAGE:67

CIRCUIT DESCRIPTIONS
2) Block Diagram.

PDI-P23LCD SERVICE MANUAL

PAGE:68

CIRCUIT DESCRIPTIONS
3) Pin configuration.

PDI-P23LCD SERVICE MANUAL

PAGE:69

CIRCUIT DESCRIPTIONS
4-1) Analog Interface

4-2) Misc. Interface

PDI-P23LCD SERVICE MANUAL

PAGE:70

CIRCUIT DESCRIPTIONS
4-3) Output Interface

4-4) Power Pins

PDI-P23LCD SERVICE MANUAL

PAGE:71