Text preview for : ARE014.PDF part of Sharp AR 5132 Technical report
Back to : Technical report.rar | Home
Date : Nov. 5, 1996 DIGITAL COPIER : AR-5040 No. : ARE-014
CHANGE IN THE ROLLER FRAME IN THE FINISHER ELEVATOR FRAME UNIT.
1.Model Name: AR-5040
2.General:
There was a danger of the sensor and the roller frame F in the finisher elevator frame unit coming in contact with each other. To alleviate this problem the roller frame F has been changed into one that is divided into two parts.
(Old)
Roller frame F Changed
CFRM-0781FC01 CFRM-0781FC02 LPLTM5319FCZZ XBBSD30P08000
Q'ty: 1 Q'ty: 1 Q'ty: 1(added) Q'ty: 2(added)
(New) Roller frame F Sensor light shield plate M3 x 8
(Assembly procedure) Changed Roller frame F CFRM-0781FC02 Sensor light shield plate LPLTM5319FCZZ
The screw should be driven so that the sensor light shield plate is positioned in the center portion of the sensor detection area.
Roller frame F CFRM-0781FC01
sc scr rew ew M When fixing the screws, 3× the screw lock should be applied. Q'ty: 8bin 2 d
3.Action:
From 1996 August production.
1/2
Green C
SHARP CORPORATION
Reprography Division
Current parts Ref. No. Model name Version P/G No. Parts code 52 -32 AR-5040 All 52 -- CFRM-0781FC01
New parts Parts code CFRM-0781FC02 LPLTM5319FCZZ XBBSD30P08000 Price rank AR AD AA Parts name
Effec- Intertive changetime ability
Note
Roller frame F Sensor light shield plate Screw (M3 x 8) 1st lot '96/8 3
1. Interchangeable. 2. Current type can be used in place of new type. New type cannot be used in place of current type. 3. Current type cannot be used in place of new type. New type can be used in place of current type. 4. Not interchangeable. 5. Interchangeable if replaced with same types of related parts in use. 6. Others.
Parts marked with " ! " is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
2/2