Text preview for : ARE084.PDF part of Sharp AR 5132 Technical report



Back to : Technical report.rar | Home

Date : Jun. 2, 1998
DIGITAL COPIER : AR-5132

No. : ARE-084

1. CHANGE CARRIED OUT IN THE ADJUSTMENT RANGE OF THE (LCD) BRIGHTNESS CONTROL FUNCTION OF THE MESSAGE DISPLAY. 2. CHANGE CARRIED OUT IN THE GROUNDING TERMI NAL OF THE AC CORD SECTION.

1. Change carried out in the adjustment range of the (LCD) brightness control function of the message display.
1.Model Name:

AR-5132

2.General:

The adjustment range of the darken control of the (LCD) brightness control functions of the message display was too narrow, and as a measure to alleviate the problem the change described below was carried out in the resistance in the operations control PWB. As a result of the change, the general, overall adjustment range was shifted to a darker level. Resistor VRS-TS2AD332J VRS-TS2AD222J

3.Action:

From the start of 1998 April production.

2. Change carried out in the grounding terminal of the AC cord section.
1.Model Name:

AR-5132 (only for machines bound for the U. S. A. and Canada markets)

2.General:

Achange has been carried out in the grounding terminals of the AC cord. The grounding terminals of the AC cord have been changed to a double clip type. This action has been carried out as a measure to comply with safety standards. Terminal QTANP0176FCZZ QTANP0092FCZZ

3.Action:

From 1998 mid-March production.

1/2
Green C

SHARP CORPORATION

Reprography Division

Current parts Ref. No. Model name Version P/G No. Parts code

New parts Parts code Price rank Parts name

Effec- Intertive changetime ability 1st lot '98/4 3 Mid'98/3

Note

1 AR-5132 2

All U.S.A. Canada 1. Interchangeable.

54 -65

VRS-TS2AD332J

VRS-TS2AD222J AA

Resistor

10 -59

QTANP0176FCZZ

QTANP0092FCZZ

Terminal

4. Not interchangeable. 5. Interchangeable if replaced with same types of related parts in use. 6. Others.

2. Current type can be used in place of new type. New type cannot be used in place of current type. 3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.

2/2