Text preview for : ARE092.PDF part of Sharp AR 5132 Technical report



Back to : Technical report.rar | Home

Date : Jul. 10, 1998
DIGITAL COPIER : AR-5132

No. : ARE-092

1. CHANGE IN THE MATERIAL USED FOR THE ATTACHMENT PLATE OF THE GUIDE SWITCH IN THE TRANSPORT UNIT CARRIED OUT AS A MEASURE TO IMPROVE PRODUCTIVITY . 2. CHANGE IN THE MATERIAL OF THE LOWER GUIDE OF THE 500 TRAY PAPER FEEDING UNIT CARRIED OUT AS A MEASURE TO IMPROVE PRODUCTIVITY . 3. CHANGE IN THE SHAPE OF THE ADU OF THE ROLLER ARM CARRIED OUT AS A MEASURE TO IMPROVE PRODUCTIVITY .

1. Change in the material used for the attachment plate of the guide switch in the transport unit carried out as a measure to improve productivity.
1.Model Name:

AR-5132

2.General:

Achange has been carried out in the material used for the attachment plate of the guide switch in the transport unit. This action has been carried out as a measure to improve productivity. In addition to this change the tapping of the attachment holes for the guide switch has been discontinued and the screws have also been changed.
Guide switch attachment plate

Changed screw XBBSD40P10000 Changed screw XBPSD30P14000 XHBSD30P14000 XHBSE40P10000

3.Action:

Running change carried out from 1998 mid-June production.

2. Change in the material of the lower guide of the 500 tray paper feeding unit carried out as a measure to improve productivity.
1.Model Name:

AR-5040

2.General:

Achange has been carried out in the material used for the lower guide in the 500 tray paper feeding unit. In addition to this change, a stopper of the pick up roller has been discontinued in one location. This action has been carried out as a measure to improve productivity. 1/3
Green C

SHARP CORPORATION

Reprography Division

Discontinued

Changed material

3.Action:

From the start of 1998 June production.

3. Change in the shape of the ADU of the roller arm carried out as a measure to improve productivity.
1.Model Name:

AR-5132

2.General:

In accordance with a change that has been carried out in the inner diameter of the clutch spring, a change has also been carried out in the inner diameter of the ADU of the roller arm. This action has been carried out as a measure to improve operationability. Details concerning the change that has been carried out in the clutch spring are reported in Technical Report No. ARE-085.

3.Action:

Running change carried out from 1998 mid-June production.

2/3

Current parts Ref. No. Model name Version P/G No. Parts code

New parts Parts code Price rank AD AA AA AN ---AD Parts name

Effec- Intertive changetime ability

Note

19 -5 1 AR-5132 19 -7 19 -2 41 -33 2 AR-5040 41 3 AR-5132 1. Interchangeable. 33 -86

LPLTM4033FCZZ XBPSD30P14000 XBBSD40P10000 PGIDM1825FCZZ LSTPP0279FCZZ MARMP0149FCZZ

LPLTM4033FCZ1 XHBSD30P14000 XHBSE40P10000 PGIDM1825FCZ1 Discontinued in one location MARMP0149FCZ1

Guide switch fixing plate Screw (M3× 14) Screw (M4× 10)

5

1

Q'ty:2

All

2
1

Lower guide 1st lot '98/6 Stopper Roller arm ADU 6

1

1

4. Not interchangeable. 5. Interchangeable if replaced with same types of related parts in use. 6. Others.

2. Current type can be used in place of new type. New type cannot be used in place of current type. 3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.

1: Running change from 1998 mid-June production. 2: Changed in 1 location only.

3/3