Text preview for : ARE098.PDF part of Sharp AR 5132 Technical report



Back to : Technical report.rar | Home

Date : Jul. 31, 1998
DIGITAL COPIER : AR-5132

No. : ARE-098

1. DISCONTINUANCE OF THE SHIELD SEAL IN THE OPTICAL UNIT CARRIED OUT AS AMEASURE TO IMPROVE PRODUCTIVITY. 2. CHANGE CARRIED OUT IN THE EFFECTIVE TIME REPORTED IN T/R ARE-088.

1. Discontinuance of the shield seal in the optical unit carried out as a measure to improve productivity.
1.Model Name:

AR-5132

2.General:

The shield seal in the optical unit has been discontinued. Also the 16 holes in two locations of the optical vibration protect sheet (PSHEG3833FCZZ) have been discontinued. This action has been carried out as a measure to improve productivity. The old optical vibration protect sheet is interchangeable with the new optical vibration protect sheet, and therefore there has been no change carried out in the part code.

3.Action:

From the start of 1998 July production. 2. Change carried out in the effective time reported in T/R ARE-088.

1.Model Name:

AR-5132 (only in machines bound for the 200 V series market destinations).

2.General:

The action to prevent contact with the copy lamp unit was reported in T/R ARE-088 as being effective as of the start of 1998 May production. Achange in the effective time has been carried out, however, and the action reported in T/R ARE-088 is effective as of the start of 1998 July production.
Current parts Ref. No. Model name Version P/G No. Parts code Parts code New parts Price rank ---Parts name Effec- Intertive changetime ability 1st lot '98/7

Note

1

AR-5132

All

12 -6

PSEL-0557FCZZ

Discontinued

Shield seal

6

Q'ty: 2

1. Interchangeable. 2. Current type can be used in place of new type. New type cannot be used in place of current type. 3. Current type cannot be used in place of new type. New type can be used in place of current type. 4. Not interchangeable. 5. Interchangeable if replaced with same types of related parts in use. 6. Others.

Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.

SHARP CORPORATION

Reprography Division

Green C