Text preview for : ARE106.PDF part of Sharp AR 5132 Technical report



Back to : Technical report.rar | Home

Date : Sep. 16, 1998
DIGITAL COPIER : AR-5132

No. : ARE-106

CHANGE IN THE SHAPE OF THE MB DRIVE SHAFT CARRIED OUT AS A MEASURE TO IMPROVE PRODUCTIVITY.

1.Model Name:

AR-5132

2.General:

A change has been carried out in the shape of the MB drive shaft used in the optical unit. This action has been carried out as a measure to improve productivity. The change described above has been carried out as illustrated in the diagram shown below.
The unused milling of the F side has been discontinued, and shortened to the E-ring section.

E-ring

Optical base plate

3.Action:

From the 1st lot of 1998 August production.

Current parts Ref. No. Model name Version P/G No. Parts code

New parts Parts code Price rank AT Parts name

Effec- Intertive changetime ability 1st lot '98/8

Note

AR-5132

All

4 -13

NSFTZ2207FCZZ

NSFTZ2207FCZ1

MB drive shaft

1

1. Interchangeable. 2. Current type can be used in place of new type. New type cannot be used in place of current type. 3. Current type cannot be used in place of new type. New type can be used in place of current type. 4. Not interchangeable. 5. Interchangeable if replaced with same types of related parts in use. 6. Others.

Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.

SHARP CORPORATION

Reprography Division

Green C