are182.pdf part of Sharp AR 5132 Technical report.rar, Technical report text manual preview

Text preview for : are182.pdf part of Sharp AR 5132 Technical report

Back to : Technical report.rar | Home

Date : Oct. 5, 1999 Digital Multi Function Copier: AR-5130/5132 No. : ARE-182

1. Simulation setting change due to addition of decurler mechanism 2. Assignment of parts code for ST upper P/G sheet guide jig ass'y

1. Simulation setting change due to addition of decurler mechanism

1. Model Name

AR-5125 (except Europe) 5130/5132 AR-5122F/FR/5230F/FR/5030F/FR (* For the SF-2530 (except SEC), SF-2540 (except SEC/SECL) and AR-5125 (for SEEG, SUK and SCA), it has been executed from the 1st unit of mass production.)

2. General

Since the decurler mechanism is added (in the market), the simulation setting value is changed. (1)About the measures when mounting the decurler kit in the market When mounting the decurler mechanism to each machine, change the value of SIMULATION 52-3 (ADU drive clutch OFF time setting) to the following numerical value.
Model name SF2022 SF2027 SF2035 SF1125 SF2025 SF2025N SF2030 SF2030N SF2040 SF2040N SF2530 All destinations All destinations All destinations All destinations All destinations All destinations All destinations (except the models sold in China) The models sold in China All destinations All destinations (except the models sold in China) The models sold in China All destinations All destinations (except SEC, SECL) SEC, SECL All destinations (except SEC, SECL) SEC, SECL All destinations (except SEEG, SUK, SCA) SEEG, SUK, SCA All destinations All destinations All destinations All destinations All destinations All destinations All destinations All destinations Since the decurler mechanism has been mounted, no change is necessary. Change to 0. Since the decurler mechanism has been mounted, no change is necessary. Change to 0. Change to 1. Since the decurler mechanism has been mounted, no change is necessary. Change to 1. Change to 1. Change to 1. Change to 1. Change to 1. Change to 1. Change to 1. Change to 1. For the SF-2040 and SF-2040N, it is necessary to change the main ROM. (Refer to T/R S-316.) Destinations Change to 1. Change to 1. Change to 1. Change to 1. Change to 1. Change to 1. Change to 1. Change to 1. Change to 1. Execute SIM52-3

SF2540

AR5125 AR5130 AR5132 AR5122F AR5122FR AR5230F AR5230FR AR5030F AR5030FR

1/3

SHARP CORPORATION

Document Division I

Green C

(2)
Name 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Lower claw fixing plate Decurler guide ass'y Decurler frame Belt drive shaft Belt driven shaft Belt tension shaft FU drive shaft bearing Bearing sintering Decurler belt Belt drive collar Reverse internal assistance sheet Decurler guide sheet E type ring E6 Parallel pin 2x10 E type ring E7 E type ring E4 M3 bind S-tight Reverse external PG Discharge cabinet Fusing lower PG Fusing lower frame Fulcrum plate R Fulcrum plate F Fulcrum plate stay Return prevention plate M3 bind S-tight Parts code LPLTM5652FCZZ CGIDH1869FC01 LFRM-1006FCZZ NSFTZ2549FCZZ NSFTZ2550FCZZ NSFTZ2551FCZZ NBRGP0478FCZZ NBRGM1040HCZZ NBLTH0322FCZZ PCLR-0455FCZZ PSHEP4697FCZ1 PSHEP4698FCZZ XRESP60-O8000 LPINS0133FCZZ XRESP70-O8000 XRESP40-O6000 XHBSD30PO6000 PGIDH1871FCZZ GCAB-0926FCZ1 (Cabinet corresponding to patent/decurler) PGIDM1872FCZZ CFRM-0748FC04 CPLTM5641FC02 CPLTM5641FC01 LSTYM0248FCZZ LPLTM5650FCZ1 XHBSD40PO6000 Q'ty 1 1 1 1 1 1 2 2 6 6 1 5 6 6 2 2 6 1 1 3 1 1 1 1 1 1 Pertinent unit Fusing unit Fusing unit Fusing unit Fusing unit Fusing unit Fusing unit Fusing unit Fusing unit Fusing unit Fusing unit Fusing unit Fusing unit Fusing unit Fusing unit Fusing unit Fusing unit Fusing unit Delivery reverse unit Delivery reverse unit Transport baseplate unit Fusing unit Delivery reverse unit Delivery reverse unit Delivery reverse unit Front frame unit Front frame unit

Note: For the SF-2530/2540 for SEC/SECL, it is not necessary to replace the parts No.21 - 26 of the above list. 2. Assignment of parts code for ST upper P/G sheet guide jig ass'y

1. Model Name

AR-FN1N (Option) Domestic/overseas

2. General

For the jig ass'y for the paper pressure release roller drive solenoid fixing position adjustment (countermeasure against paper jam of FN1N) and the ST upper P/G sheet cut, the following parts code is assigned by request of the market.

3. Description

OEUKOG0608L01 is assigned as a parts code for the ST upper P/G sheet cut jig ass'y.

2/3

No. 1 2 3 4

Name PLU clearance gage Sheet cut gage 3 x 6 pan Slotted double-coated adhesive tape

Material SECC t=1.0 Al Nitto No.5000 5 x 96

Parts code OEUKOGO608L// OEUKOGO609L// XBPSD30PO06000 -

Quantity 1 1 2 1

3/3