Text preview for : SP2131.PDF part of Sharp AR 5132 Technical report
Back to : Technical report.rar | Home
Date : May. 16, 1997 DM11/AR-5132 No. : SP-2131
MEASURE TO PREVENT RETURN ROLLER CONTACT.
1.Model Name:
SF-DM11
2.General:
There were problems of the transport P guide upper of the ADU coming in contact with the return roller in the models listed above, caused by looseness. As a measure to alleviate this problem, tighteners have been added in two locations on the roller section of the transport P guide.
3.Description:
Transport PG upper AS
(Old) CGIDH1360FC01 (New) CGIDH1360FC02
4.Action:
From the start of 1997 March production. (Temporary action has already been carried out during production for the period between mid-January production and February production.)
Current parts Ref. No. Model name Version P/G No. Parts code
New parts Parts code Price rank Parts name
Effec- Intertive changetime ability
Note
SF-DM11 (SF-2022) 1
All
43 -66 Transport P guide upper AS 1st lot '97/3
SF-DM11 (SF-2025) Overseas 41 -66 (SF-2030) SF-DM11 (SF-2040) 1. Interchangeable. All 42 -66
CGIDH1360FC01
CGIDH1360FC02
AY
3
4. Not interchangeable. 5. Interchangeable if replaced with same types of related parts in use. 6. Others.
2. Current type can be used in place of new type. New type cannot be used in place of current type. 3. Current type cannot be used in place of new type. New type can be used in place of current type.
Parts marked with " ! " is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
SHARP CORPORATION
Reprography Division
Green C