Text preview for : AL-1035 Instruction for Use of Adjustment Tool.pdf part of Sharp AL-1035 AL-1035 Instruction for Use of Adjustment Tool



Back to : AL-1035 Instruction for U | Home

Instruction for Use of Adjustment Tool
Note: Be sure to install AL-1035 driver program in PC before using the adjustment tool.

4. Read Data from EEPROM
Clicking [Read all NVRAM] button to read all data in the printer EEPROM and store them in PC.

1. Install
Copy the adjustment tool folder under the root directory of Drive D and put the shortcut on the desktop.

5. Write Data to EEPROM 2. Connect
Connect PC with AL-1035 through USB code and power on AL-1035. Clicking [Write all NVRAM] button to open the window for writing data to EEPROM.

3. Execution
Double-click to open M140NVRamServiceTool.exe.

"Device not found" dialogue appears when the cable is not connected correctly or the printer is not turned on.

After the device connection is completed, "Welcome" screen appears. Clicking "SHARP AL-1035 NVRAM Service Tool" key to enter into Adjustment System Main Function Interface.

AL-1035

Adjustment List

7­6