Text preview for : Disassembly & Reassembly.pdf part of mas ucim niki skemane.. uclemala7..



Back to : SM-G530H_service_manual.r | Home

7. Level 2 Repair
7-1. Disassembly and Assembly Instructions 7-1-1. Disassembly
1 1) Disassemble LCD connector protect cover 2 1) Separate the LCD connector

Caution 1) Be care of scratch and molding damage.
3 1) Displace the temperature chamber for 10 minute 2) Detach the TSP/LCD Assay using Vaccum jig

Caution 1) Be care of scratch and molding damage 2) Be care of damage to the LCD FPCB and PBA
4 1) Unscrew the 9 points

AIR pressure 5~7 kgf/cm Caution 1) Before disassembling, Use heating chamber. 2) Be care of scratch and molding damage. Caution 1) Be care of scratch and molding damage.

7-1

Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.

Level 2 Repair

5

1) Release the 11 hooks according to a guide 2) Detach the REAR and Bracket Assy

6

1) Detach the Bracket Assay from Rear.











Caution

Caution 1) Be care of damage to RCV module, SPK 2) Be care of damage to the part's FPCB
8 1) Separate the RCV, Motor, Speaker from hook

1) Be care of damage to the Bracket 2) Be care of damage to the PBA Assy
7 1) Separate the VT, MEGA Camera from PBA

Caution 1) Be care of damage to the part's FPCB

Caution 1) Be care of scratch, molding damage and part

7-2

Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.

Level 2 Repair

7-1-2. Assembly
1 1) Assamble the RCV module, Speaker, Motor on Bracket 2 1) Assemble the VT, MEGA Camera on PBA

Caution 1) Be care of damage to the part

Caution 1) Be care of damage to the part and it's FPCB

3

1) Assemble RCV module and SPK 2) Hang the 1 hook for PBA

4

1) First, insert a bracket from EARJACK part of REAR

Caution 1) Be care of damage to PBA

Caution 1) Be care of damage to the REAR and Bracket

7-3

Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.

Level 2 Repair

5

1) Hang the 11 hooks, 2 ribs and press it

6

1) Remove the TSP tape













Caution







Caution 1) Be care of damage to the TSP and LCD

1) Press the 11 hooks and 2 ribs

7

1) Attach the TSP tape

8

1) Screw the 9 points of the Rear 1.2 ± 0.1 Kgf/

Caution 1) Be care of damage to TSP and LCD

Caution 1) Be care of scratch and molding damage

7-4

Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.

Level 2 Repair

9

1) Attach the LCD assay to the Rear Assay

10

1) Assemble LCD connector

Caution 1) Be care of scratch and molding damage
11 1) Assemble LCD connector protect cover

Caution 1) Be care of scratch, LCD FPCB and PBA
12 1) Press the set 2 times using pressure jig

Caution 1) Be care of scratch and molding damage

Caution - Pressure : 5~6 kgf/cm2 - Press time : 11.7 sec

7-5

Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.