Text preview for : Manual_TX-NR414_En.pdf part of Onkyo TX-NR414 Instruction Manual
Back to : Manual_TX-NR414_En.pdf | Home
Contents
AV RECEIVER Safety Information and Introduction ............2
TX-NR414 Table of Contents ...........................................6
Connections .................................................12
Turning On & Basic Operations..................19
Instruction Manual Advanced Operations ..................................39
Controlling Other Components...................53
Appendix .......................................................59
Internet Radio Guide
Remote Control Codes
En
Safety Information and Introduction
9. Do not defeat the safety purpose of the polarized or D. If the apparatus does not operate normally by
grounding-type plug. A polarized plug has two blades following the operating instructions. Adjust only
WARNING: with one wider than the other. A grounding type plug those controls that are covered by the operating
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, has two blades and a third grounding prong. The wide instructions as an improper adjustment of other
DO NOT EXPOSE THIS APPARATUS TO RAIN OR blade or the third prong are provided for your safety. If controls may result in damage and will often
MOISTURE.
the provided plug does not fit into your outlet, consult require extensive work by a qualified technician to
an electrician for replacement of the obsolete outlet. restore the apparatus to its normal operation,
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT 10. Protect the power cord from being walked on or E. If the apparatus has been dropped or damaged in
REMOVE COVER (OR BACK). NO USER-SERVICEABLE pinched particularly at plugs, convenience receptacles, any way, and
PARTS INSIDE. REFER SERVICING TO QUALIFIED and the point where they exit from the apparatus. F. When the apparatus exhibits a distinct change in
SERVICE PERSONNEL. 11. Only use attachments/accessories specified by the performance this indicates a need for service.
manufacturer. 16. Object and Liquid Entry
12. Use only with the cart, stand, PORTABLE CART WARNING Never push objects of any kind into the apparatus
WARNING AVIS
RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE tripod, bracket, or table through openings as they may touch dangerous voltage
DO NOT OPEN NE PAS OUVRIR
specified by the manufacturer, points or short-out parts that could result in a fire or
The lightning flash with arrowhead symbol, within an or sold with the apparatus. electric shock.
equilateral triangle, is intended to alert the user to the When a cart is used, use The apparatus shall not be exposed to dripping or
presence of uninsulated "dangerous voltage" within
caution when moving the splashing and no objects filled with liquids, such as
the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
cart/apparatus combination to vases shall be placed on the apparatus.
S3125A
persons. avoid injury from tip-over. Don't put candles or other burning objects on top of
The exclamation point within an equilateral triangle is 13. Unplug this apparatus during lightning storms or when this unit.
intended to alert the user to the presence of important unused for long periods of time. 17. Batteries
operating and maintenance (servicing) instructions in 14. Refer all servicing to qualified service personnel. Always consider the environmental issues and follow
the literature accompanying the appliance. Servicing is required when the apparatus has been local regulations when disposing of batteries.
damaged in any way, such as power-supply cord or 18. If you install the apparatus in a built-in installation,
plug is damaged, liquid has been spilled or objects such as a bookcase or rack, ensure that there is
have fallen into the apparatus, the apparatus has been adequate ventilation.
Important Safety Instructions exposed to rain or moisture, does not operate normally, Leave 20 cm (8") of free space at the top and sides and
1. Read these instructions. or has been dropped. 10 cm (4") at the rear. The rear edge of the shelf or
2. Keep these instructions. 15. Damage Requiring Service board above the apparatus shall be set 10 cm (4") away
3. Heed all warnings. Unplug the apparatus from the wall outlet and refer from the rear panel or wall, creating a flue-like gap for
4. Follow all instructions. servicing to qualified service personnel under the warm air to escape.
5. Do not use this apparatus near water. following conditions:
6. Clean only with dry cloth. A. When the power-supply cord or plug is damaged,
7. Do not block any ventilation openings. Install in B. If liquid has been spilled, or objects have fallen
accordance with the manufacturer's instructions. into the apparatus,
8. Do not install near any heat sources such as radiators, C. If the apparatus has been exposed to rain or water,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
En-2
Safety Information and Introduction
Precautions 5. Preventing Hearing Loss
Caution
For U.S. models
FCC Information for User
1. Recording Copyright--Unless it's for personal use Excessive sound pressure from earphones and
CAUTION:
only, recording copyrighted material is illegal without headphones can cause hearing loss.
6. Batteries and Heat Exposure The user changes or modifications not expressly approved
the permission of the copyright holder.
Warning by the party responsible for compliance could void the
2. AC Fuse--The AC fuse inside the unit is not user-
Batteries (battery pack or batteries installed) shall not user's authority to operate the equipment.
serviceable. If you cannot turn on the unit, contact your
Onkyo dealer. be exposed to excessive heat as sunshine, fire or the NOTE:
3. Care--Occasionally you should dust the unit all over like. This equipment has been tested and found to comply with
with a soft cloth. For stubborn stains, use a soft cloth 7. Never Touch this Unit with Wet Hands--Never the limits for a Class B digital device, pursuant to Part 15
dampened with a weak solution of mild detergent and handle this unit or its power cord while your hands are of the FCC Rules. These limits are designed to provide
water. Dry the unit immediately afterwards with a wet or damp. If water or any other liquid gets inside reasonable protection against harmful interference in a
clean cloth. Don't use abrasive cloths, thinners, this unit, have it checked by your Onkyo dealer. residential installation.
alcohol, or other chemical solvents, because they may 8. Handling Notes This equipment generates, uses and can radiate radio
damage the finish or remove the panel lettering. · If you need to transport this unit, use the original frequency energy and, if not installed and used in
4. Power packaging to pack it how it was when you originally accordance with the instructions, may cause harmful
WARNING bought it. interference to radio communications. However, there is no
BEFORE PLUGGING IN THE UNIT FOR THE · Do not leave rubber or plastic items on this unit for a guarantee that interference will not occur in a particular
FIRST TIME, READ THE FOLLOWING SECTION long time, because they may leave marks on the installation. If this equipment does cause harmful
CAREFULLY. case. interference to radio or television reception, which can be
AC outlet voltages vary from country to country. Make · This unit's top and rear panels may get warm after determined by turning the equipment off and on, the user is
sure that the voltage in your area meets the voltage prolonged use. This is normal. encouraged to try to correct the interference by one or more
requirements printed on the unit's rear panel (e.g., AC · If you do not use this unit for a long time, it may not of the following measures:
230 V, 50 Hz or AC 120 V, 60 Hz). work properly the next time you turn it on, so be sure
· Reorient or relocate the receiving antenna.
to use it occasionally.
The power cord plug is used to disconnect this unit · Increase the separation between the equipment and
from the AC power source. Make sure that the plug is receiver.
readily operable (easily accessible) at all times. · Connect the equipment into an outlet on a circuit different
For models with [POWER] button, or with both from that to which the receiver is connected.
[POWER] and [ON/STANDBY] buttons: · Consult the dealer or an experienced radio/TV technician
Pressing the [POWER] button to select OFF mode for help.
does not fully disconnect from the mains. If you do not
intend to use the unit for an extended period, remove
the power cord from the AC outlet.
For models with [ON/STANDBY] button only:
Pressing the [ON/STANDBY] button to select
Standby mode does not fully disconnect from the
mains. If you do not intend to use the unit for an
extended period, remove the power cord from the AC
outlet.
En-3
Safety Information and Introduction
For Canadian Models IMPORTANT
NOTE: THIS CLASS B DIGITAL APPARATUS The plug is fitted with an appropriate fuse. If the fuse needs
COMPLIES WITH CANADIAN ICES-003. to be replaced, the replacement fuse must approved by
For models having a power cord with a polarized plug: ASTA or BSI to BS1362 and have the same ampere rating
CAUTION: TO PREVENT ELECTRIC SHOCK, as that indicated on the plug. Check for the ASTA mark or
MATCH WIDE BLADE OF PLUG TO WIDE SLOT, the BSI mark on the body of the fuse.
FULLY INSERT. If the power cord's plug is not suitable for your socket
outlets, cut it off and fit a suitable plug. Fit a suitable fuse
Modèle pour les Canadien in the plug.
REMARQUE: CET APPAREIL NUMÉRIQUE DE LA
CLASSE B EST CONFORME À LA NORME NMB-003 For European Models
DU CANADA.
Sur les modèles dont la fiche est polarisée: Declaration of Conformity
ATTENTION: POUR ÉVITER LES CHOCS We, ONKYO EUROPE
ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS ELECTRONICS GmbH
LIEGNITZERSTRASSE 6,
LARGE DE LA FICHE DANS LA BORNE 82194 GROEBENZELL,
CORRESPONDANTE DE LA PRISE ET POUSSER GERMANY
JUSQU'AU FOND. declare in own responsibility, that the ONKYO product
described in this instruction manual is in compliance with the
corresponding technical standards such as EN60065,
For British models EN55013, EN55020 and EN61000-3-2, -3-3.
Replacement and mounting of an AC plug on the power GROEBENZELL, GERMANY
supply cord of this unit should be performed only by
qualified service personnel. K. MIYAGI
ONKYO EUROPE ELECTRONICS GmbH
IMPORTANT
The wires in the mains lead are coloured in accordance
with the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured
black.
The wire which is coloured brown must be connected to
the terminal which is marked with the letter L or coloured
red.
En-4
Safety Information and Introduction
Installing the batteries Aiming the remote controller
Supplied Accessories To use the remote controller, point it at the AV receiver's
Make sure you have the following accessories: remote control sensor, as shown below.
Indoor FM antenna ( page 18) Remote control sensor
AM loop antenna ( page 18) AV receiver
Power cord (Taiwanese models) ( page 18)
Speaker cable labels ( page 12)
Remote controller (RC-834M) and two batteries (AA/R6)
(Note for China: The battery for the remote controller is not
supplied for this unit.)
Quick Start Guide
Approx. 16 ft. (5 m)
Batteries (AA/R6)
* In catalogs and on packaging, the letter at the end of the product
name indicates the color. Specifications and operations are the
same regardless of color. Note
· If the remote controller doesn't work reliably, try replacing the
batteries.
· Don't mix new and old batteries or different types of batteries.
· If you intend not to use the remote controller for a long time,
remove the batteries to prevent damage from leakage or
corrosion.
· Remove expired batteries as soon as possible to prevent damage
from leakage or corrosion.
Thank you for purchasing an Onkyo AV Receiver.
Please read this manual thoroughly before making
connections and plugging in the unit.
Following the instructions in this manual will
enable you to obtain optimum performance and
listening enjoyment from your new AV Receiver.
Please retain this manual for future reference.
En-5
Safety Information and Introduction
Table of Contents Using Basic Functions............................................... 30
Using the Listening Modes ....................................... 30
Appendix
Using the Home Menu .............................................. 35
Using the Sleep Timer .............................................. 36
Troubleshooting ......................................................... 59
Safety Information and Introduction Setting the Display Brightness.................................. 36
Firmware Update ........................................................ 64
Displaying Source Information.................................. 36
Connection Tips and Video Signal Path .................. 68
Important Safety Instructions ......................................2 Changing the Input Display....................................... 37
Using an RIHD-compatible TV, Player,
Precautions ...................................................................3 Using the Music Optimizer........................................ 37
or Recorder .............................................................. 69
Supplied Accessories...................................................5 Muting the AV Receiver ............................................ 37
About HDMI................................................................. 71
Table of Contents..........................................................6 Using Headphones ................................................... 38
Network/USB Features............................................... 72
Features .........................................................................7 License and Trademark Information ........................ 75
Front & Rear Panels......................................................8 Specifications ............................................................. 76
Front Panel..................................................................8 Advanced Operations
Display ........................................................................9 On-screen Setup......................................................... 39
Rear Panel ................................................................10 Using the Quick Setup .............................................. 39 To reset the AV receiver to its factory defaults, turn it
Remote Controller.......................................................11 Using the Audio Settings of Quick Setup.................. 40 on and, while holding down CBL/SAT, press
Controlling the AV Receiver ......................................11 Using the Setup Menu (HOME) ................................ 41 ON/STANDBY ( page 59).
About the HYBRID STANDBY indicator ................... 42
Connections Setup menu items..................................................... 42
HDMI Input................................................................ 43
Connecting the AV Receiver......................................12 Component (Component Video Input) ...................... 43
Connecting Your Speakers .......................................12 Digital Audio (Digital Audio Input) ............................. 44
About AV Connections ..............................................14 Sp Config (Speaker Configuration)........................... 44
Connecting Components with HDMI .........................15 Sp Distance (Speaker Distance)............................... 45
Connecting Your Components ..................................16 Level Cal (Level Calibration)..................................... 45
Connecting Onkyo Components .........................17 Audio Adjust.............................................................. 46
Connecting the Antennas..........................................18 Source Setup ............................................................ 47
Connecting the Power Cord ......................................18 Hardware .................................................................. 48
HDMI Setup .............................................................. 49
Network Setup .......................................................... 50
Turning On & Basic Operations Zone 2 .......................................................................... 52
Making Zone 2 Connections ..................................... 52
Turning On/Off the AV Receiver ................................19 Controlling Zone 2 Components ............................... 52
Turning On ................................................................19
Turning Off ................................................................19
Playback ......................................................................20 Controlling Other Components
Playing the Connected Component ..........................20
Controlling Contents of USB or Network Devices .....21 iPod/iPhone Playback via Onkyo Dock .................... 53
Understanding Icons on the Display .........................22 Using the Onkyo Dock .............................................. 53
Playing an iPod/iPhone via USB ...............................22 Controlling Your iPod/iPhone.................................... 54
Playing a USB Device ...............................................23 Controlling Other Components ................................. 55
Listening to vTuner Internet Radio ............................23 Preprogrammed Remote Control Codes .................. 55
Registering Other Internet Radio ..............................24 Entering Remote Control Codes............................... 55
Playing Music Files on a Server................................25 Remapping Colored Buttons..................................... 55
Remote Playback ......................................................26 Remote Control Codes for
Listening to AM/FM Radio.........................................27 Onkyo Components Connected via ................. 56
Resetting the REMOTE MODE Buttons ................... 56
Resetting the Remote Controller .............................. 56
Controlling Other Components ................................. 57
En-6
Safety Information and Introduction
Features Connections Miscellaneous
· 6 HDMI Inputs and 1 Output · 40 FM/AM Presets
Amplifier · Onkyo for System Control · Crossover Adjustment
· 4 Digital Inputs (2 Optical/2 Coaxial) (40/50/60/70/80/90/100/120/150/200 Hz)
· 80 Watts/Channel @ 8 ohms (FTC)
· Component Video Switching (2 Inputs/1 Output) · A/V Sync Control Function (up to 400 ms)
· 130 Watts/Channel @ 6 ohms (IEC)
· Banana Plug-Compatible Speaker Posts · Auto Standby Function
· 160 Watts/Channel @ 6 ohms (JEITA)
* In Europe, using banana plugs to connect speakers to an audio · On-Screen Display via HDMI
· Optimum Gain Volume Circuitry
amplifier is prohibited. · Preprogrammed -Compatible Remote
· H.C.P.S. (High Current Power Supply) Massive High
· Internet Radio Connectivity (SiriusXM Internet
Power Transformer
Radio/vTuner/Last.fm/Pandora/Rhapsody/Slacker/
Processing Mediafly/AUPEO!)
* Available services may vary depending on the region.
· HDMI (Audio Return Channel, 3D, DeepColor, · Network Capability for Streaming Audio Files
x.v.Color, Lip Sync, DTS-HD Master Audio, DTS-HD · Front-Panel USB Input for Memory Devices and
High Resolution Audio, Dolby TrueHD, Dolby Digital iPod®/iPhone® models
Plus, DSD and Multi-CH PCM)
· Non-Scaling Configuration
· A-Form Listening Mode Memory
· Direct Mode
· Pure Audio Mode (European, Australian and Asian
models)
· Music Optimizer for Compressed Digital Music files
· 192 kHz/24-bit D/A Converters
· Powerful and Highly Accurate 32-bit Processing DSP
· Jitter Cleaning Circuit Technology
En-7
Safety Information and Introduction
Front & Rear Panels
Front Panel
(North American and Taiwanese models) (European, Australian and Asian models)
For detailed information, see the pages in parentheses. SETUP button (41) HYBRID STANDBY indicator (42)
ON/STANDBY button (19) TUNING / , PRESET / (27), cursor and PURE AUDIO button and indicator (European,
ZONE 2, OFF buttons (52) ENTER buttons Australian and Asian models) (30)
Remote control sensor (5) RETURN button RT/PTY/TP button (European, Australian and
Display (9) MASTER VOLUME control (20) Asian models) (28)
LISTENING MODE buttons (30) MUSIC OPTIMIZER button and indicator (North
DIMMER button (North American and Taiwanese American and Taiwanese models) (37, 40)
models) (36) PHONES jack (38)
MEMORY button (28) TONE and Tone Level buttons (40)
TUNING MODE button (27) Input selector buttons (20)
DISPLAY button (36) AUX INPUT AUDIO/VIDEO jacks (16)
USB port (16)
En-8
Safety Information and Introduction
Display
s
For detailed information, see the pages in parentheses. Input indicators (68)
Z2 (Zone 2) indicator (52) HDMI indicator (49)
3D indicator DIGITAL indicator
This lights when a 3D input signal is detected. ARC indicator (50)
Headphone indicator (38) USB indicator (22, 23)
, and cursor indicators (22) NET indicator (23 to 26, 51)
Listening mode and format indicators (30) Message area
M.Opt indicator (37, 40) SLEEP indicator (36)
Tuning indicators Channel/Unit indicators
RDS indicator (excluding North American and ch indicator
Taiwanese models) (28) Hz indicator
AUTO indicator (27) m/ft indicator
TUNED indicator (27) dB indicator
FM STEREO indicator (27)
ASb indicator (48)
MUTING indicator (37)
En-9
Safety Information and Introduction
Rear Panel
(North American, European, Australian and Asian models) (Taiwanese models)
DIGITAL IN COAXIAL and OPTICAL jacks Composite video and analog audio jacks
COMPONENT VIDEO IN and OUT jacks (BD/DVD IN, CBL/SAT IN, GAME IN, PC IN,
ETHERNET port TV/CD IN)
FM ANTENNA jack and AM ANTENNA terminal ZONE 2 LINE OUT jacks
HDMI IN and OUT jacks SUBWOOFER PRE OUT jack
SPEAKERS terminals MONITOR OUT V jack
(CENTER, FRONT, SURROUND) AC INLET (Taiwanese models)
Power cord (North American, European, Australian
and Asian models) See "Connecting the AV Receiver" for connection
( pages 12 to 18).
REMOTE CONTROL jack
En-10
Safety Information and Introduction
Controlling the tuner
Remote Controller To control the AV receiver, press RECEIVER to select
To control the AV receiver's tuner, press AM or FM (or
Receiver mode.
RECEIVER).
You can also use the remote controller to control
Controlling the AV Receiver / buttons (27)
Onkyo Blu-ray Disc/DVD player, CD player, and
other components. D.TUN button (27)
See "Entering Remote Control Codes" for more DISPLAY button
details ( page 55).
CH +/ button (28)
For detailed information, see the pages in parentheses. Number buttons (27)
*1 RECEIVER button (19)
*1 To control a component, you must first enter the remote
REMOTE MODE/INPUT SELECTOR buttons (20)
control code.
/ / / and ENTER buttons See "Entering Remote Control Codes" for more details
Q SETUP button (39) ( page 55).
Listening Mode buttons (30)
DIMMER button (36)
MUTING button (37)
DISPLAY button (36)
VOL / button (20)
RETURN button
HOME button (35)
SLEEP button (36)
En-11
Connections
Connecting the AV Speaker Configuration
Receiver Surround
right
Surround
left
The following table indicates the channels you should use
depending on the number of speakers that you have.
No matter how many speakers you use, a powered
Connecting Your Speakers subwoofer is recommended for a really powerful and solid
bass.
Connecting the Speaker Cables To get the best from your surround sound system, you need
The following illustration shows how to connect the to set the speaker settings manually ( page 44).
speakers to each pair of terminals. Number of speakers 2 3 4 5
Front speakers
Screw-type speaker terminals
Center speaker
Strip 1/2" to 5/8" (12 to 15 mm) of insulation from the ends
of the speaker cables, and twist the bare wires tightly, as Surround speakers
shown.
1/2" to 5/8" (12 to 15 mm) Attaching the Speaker Cable Labels
The speaker terminals are color-coded for identification
purpose.
Banana Plugs (North American models) Speaker Color
· If you are using banana plugs, tighten the speaker Front left White
terminal before inserting the banana plug. Front right Red
· Do not insert the speaker code directly into the center Center Green
hole of the speaker terminal. Front right Front left Center Surround left Blue
Surround right Gray
The supplied speaker cable labels are also color-coded and
you should attach them to the positive (+) side of each
speaker cable in accordance with the table above. Then all
you need to do is to match the color of each label to the
corresponding speaker terminal.
En-12
Connections
Speaker Connection Precautions · Don't connect more than one cable to each speaker Using a Powered Subwoofer
terminal. Doing so may damage the AV receiver.
Read the following before connecting your speakers: · Don't connect one speaker to several terminals.
· You can connect speakers with an impedance of between
6 and 16 ohms. If you use speakers with a lower
impedance, and use the amplifier at high volume levels LINE INPUT
for a long period of time, the built-in amp protection
circuit may be activated. LINE INPUT
· Disconnect the power cord from the wall outlet before
making any connections. Powered
subwoofer
· Read the instructions supplied with your speakers.
· Pay close attention to speaker wiring polarity. In other
words, connect positive (+) terminals only to positive (+)
terminals, and negative () terminals only to negative ()
terminals. If you get them the wrong way around, the
sound will be out of phase and will sound unnatural.
Corner
· Unnecessarily long, or very thin speaker cables may position
affect the sound quality and should be avoided.
· Be careful not to short the positive and negative wires.
Doing so may damage the AV receiver. 1/3 of wall
· Make sure the metal core of the wire does not have position
contact with the AV receiver's rear panel. Doing so may
To find the best position for your subwoofer, while playing
damage the AV receiver.
a movie or some music with good bass, experiment by
placing your subwoofer at various positions within the
room, and choose the one that provides the most satisfying
results.
Tip
· If your subwoofer is unpowered and you're using an external
amplifier, connect the subwoofer pre out jack to an input on the
amplifier.
En-13
Connections
AV Cables and Jacks Analog audio (RCA)
About AV Connections
Analog audio connections (RCA) carry analog audio.
Connecting AV components HDMI
White
a
HDMI connections can carry digital video and audio.
HDMI cable : Video & Audio Red
TV, projector, etc.
*1 Available sampling rate for PCM input signal (stereo/mono) is
Component video 32/44.1/48/88.2/96 kHz. In case of an HDMI connection,
AV receiver 176.4/192 kHz is also available.
Component video separates the luminance (Y) and color
difference signals (PB, PR), providing the best picture Note
quality (some TV manufacturers label their component · The AV receiver does not support SCART plugs.
video sockets slightly differently). · The AV receiver's optical digital jacks have shutter-type covers
that open when an optical plug is inserted and close when it's
Y Green removed. Push plugs in all the way.
Blu-ray Disc/
DVD player Game console PB Blue Caution
PR Red · To prevent shutter damage, hold the optical plug straight
Other cables when inserting and removing.
: Video : Audio
TV, projector, etc. Composite video
Composite video is commonly used on TVs, DVDs, and
AV receiver
other video equipment.
Yellow
Optical digital audio
Optical digital connections allow you to enjoy digital
Blu-ray Disc/ sound such as PCM*1, Dolby Digital or DTS. The audio
DVD player Game console quality is the same as coaxial.
· Before making any AV connections, read the manuals
supplied with your AV components.
· Don't connect the power cord until you've completed and Coaxial digital audio
double-checked all AV connections. Coaxial digital connections allow you to enjoy digital
· Push plugs in all the way to make Right! sound such as PCM*1, Dolby Digital or DTS. The audio
good connections (loose connections quality is the same as optical.
can cause noise or malfunctions).
Orange
· To prevent interference, keep audio
and video cables away from power Wrong!
cords and speaker cables.
En-14
Connections
Connecting Components with HDMI
Satellite/cable set-top box, etc.
Personal computer
TV, projector, etc.
Blu-ray Disc/DVD player
Game console
* If your TV doesn't support Audio Return Channel (ARC), you See also: Audio Return Channel (ARC) function
need to connect an optical digital cable together with the HDMI · "Connection Tips and Video Signal Path" ( page 68) Audio Return Channel (ARC) function enables an HDMI
cable to the AV receiver. capable TV to send the audio stream to the HDMI OUT of
*
· "Using an RIHD-compatible TV, Player, or Recorder"
When listening to an HDMI component through the AV
( page 69) the AV receiver.
receiver, set the HDMI component so that its video can be seen
· "About HDMI" ( page 71) · This function can be used when:
on the TV screen (on the TV, select the input of the HDMI
Your TV is ARC capable, and
component connected to the AV receiver). If the TV power is off Tip The TV/CD input selector is selected, and
or the TV is set to another input source, this may result in no
· To listen to the audio of a component connected via HDMI "HDMI Ctrl (RIHD)" is set to "On"( page 49), and
sound from the AV receiver or the sound may be cut off.
through your TV's speakers, enable "HDMI Through" "Audio Return Ch" is set to "Auto" ( page 50).
Connect your components to the appropriate jacks. The ( page 49) and set the AV receiver to standby mode.
default input assignments are shown below.
Note
: Assignment can be changed ( page 43).
· In the case of Blu-ray Disc/DVD players, if no sound is output
Jack Components despite following the above-mentioned procedure, set your Blu-
HDMI IN1 Blu-ray Disc/DVD player ray Disc/DVD player's HDMI audio settings to PCM.
HDMI IN2 Satellite/cable set-top box, etc.
HDMI IN3 Game console
HDMI IN4 Personal computer
HDMI IN5 Other components
HDMI IN6 Other components
HDMI OUT TV, projector, etc.
En-15
Connections
Connecting Your Components The on-screen menus appear only on a TV that is Note
connected to the HDMI OUT. If your TV is connected *1 When USB input is selected, you can input video signals from
to other video outputs, use the AV receiver's display the AUX INPUT VIDEO jack. Video signals input from AUX
when changing settings. INPUT VIDEO will be output from the MONITOR OUT jack.
*2 Do not connect the AV receiver's USB port to a USB port on
: Assignment can be changed ( page 43). your computer. Music on your computer cannot be played
through the AV receiver in this way.
No. Jack/Port Components *3 Connect a turntable (MM) that has a phono preamp built-in. If
AUX INPUT your turntable (MM) doesn't have it, you'll need a
VIDEO Camcorder, etc commercially available phono preamp.
AUDIO L/R If your turntable has a moving coil (MC) type cartridge, you'll
need a commercially available MC head amp or MC
USB, AUX INPUT iPod/iPhone (video
transformer as well as a phono preamp. See your turntable's
VIDEO*1 playback)
manual for details.
USB*2 iPod/iPhone, MP3 player,
USB flash drive · With connection , you can enjoy Dolby Digital and
DIGITAL IN DTS. (To listen in Zone 2 as well, use and .)
OPTICAL 1 (GAME) Game consoles · With connection , you can listen audio from the
OPTICAL 2 (TV/CD) TV, CD player external components while you are in Zone 2.
COAXIAL 1 (BD/DVD) Blu-ray Disc/DVD player · With connection , if your Blu-ray Disc/DVD player
COAXIAL 2 (CBL/SAT) Satellite/cable set-top box, has both the main stereo and multichannel outputs, be
RI dock, etc. sure to connect the main stereo.
COMPONENT VIDEO
IN 1 (BD/DVD) Blu-ray Disc/DVD player,
RI dock
IN 2 (CBL/SAT) Satellite/cable set-top box,
RI dock, etc.
OUT TV, projector, etc.
ETHERNET Router
MONITOR OUT TV, projector, etc.
BD/DVD IN Blu-ray Disc/DVD player
CBL/SAT IN Satellite/cable set-top box,
etc.
GAME IN Game console, RI dock
PC IN Personal computer
TV/CD IN TV, CD player, cassette
tape deck, MD, CD-R,
Connect your components to the appropriate jacks. The Turntable*3, RI dock
default input assignments are shown below. See
"Connection Tips and Video Signal Path" for more
information ( page 68).
En-16
Connections
Connecting Onkyo Components
1 Make sure that each Onkyo component is connected
with an analog audio cable (conne