Text preview for : g235h_innolux_901.pdf part of Acer G235H LCD Monitor



Back to : g235h_innolux_901.pdf | Home

G235H
Service Manual




Service Manual
LCD Monitor G235H




Copyright
Copyright 2009 Innolux Display Corp. Ltd

All Rights Reserved

This manual may not, in whole or in part, be copied, Photocopied, reproduced, translated, or converted to any
electronic or machine readable form without prior written permission of Innolux Display Corp. Ltd.

G235H Wide Service Manual
-0-
1

Table of Contents


Important Safety Notice ......................................................................................02
01 Product Specification .......................................................................................03
02 Flat Panel Specification ....................................................................................29
03 Exploded Diagram ............................................................................................61
04 Troubleshooting..................................................................................................66
05 Spare Parts List .................................................................................................73
06 Schematics and Layouts....................................................................................77
07 Assembly and Disassembly .............................................................................92




1
G235H
Service Manual

Important Safety Notice

1. Safety precautions
This monitor is manufactured and tested on a ground principle that a user's safety comes first. However,
improper usage or installation may cause damage to the monitor as well as to the user.
Warnings:
This monitor should be operated only at the correct power sources indicated on the label on the rear of the
monitor. If you're unsure of the power supply in you residence, consult your local dealer or Power
Company.
Do not try to repair the monitor by yourself, as it contains no user-serviceable parts. This monitor should
only be repaired by a qualified technician.
Do not remove the monitor cabinet. There is high-voltage parts inside that may cause electric shock to
human bodies.
Stop using the monitor if the cabinet is damaged. Have it checked by a service technician.
Put your monitor only in a lean, cool, dry environment. If it gets wet, unplug the power cable immediately
and consult your closed dealer.
Always unplug the monitor before cleaning it. Clean the cabinet with a clean, dry cloth. Apply
non-ammonia based cleaner onto the cloth, not directly onto the class screen.
Do not place heavy object on the monitor or power cord.
2. Product safety notice
Many electrical and mechanical parts in this chassis have special safety visual inspections and the
protection afforded by them cannot necessarily be obtained by using replacement components rated for
higher voltage, wattage, etc. Before replacing any of these components read the parts list in this manual
carefully. The use of substitute replacement parts, which do not have the same safety characteristics as
specified in the parts list, may create shock, fire, or other hazards.
3. Service notes
When replacing parts or circuit boards, clamp the lead wires around terminals before soldering.
Keep wires away from high voltage, high temperature components and sharp edges.
Keep wires in their original position so as to reduce interference.
Adjustment of this product please refers to the user's manual.




2
G235H
Service Manual
01 Product Specification
1. General:
G235H series LCD monitor is designed with a wide screen 23.0" WSXGA+ TFT LCD panel, LVDS interface, analog RGB signal
input. Additional a DVI-D&HDMI input function is as option block..
It featured with embedded universal AC power supply. This monitor can support maximum resolution up to 1920 x 1080@60Hz. It
support HDCP and color management function.
Details in this document DVI&HDMI referred to is an option function depending on client's requirement. In our factory, products
should be distinguished by module names.
1.1 Main Features
Maximum resolution : 1920 x 1080 @ 60Hz
Back light system : 4 CCFL (top & bottom edge side)
Pixel pitch : 0.2652 (H) x 0.2652 (V)
Display area : 509.184(H)x286.416(V) 23.0 inch diagonal
Brightness : 250cd/m²
Contrast ratio : 10001 (typ.) (1)
ACM (option) :80000:1
Response time (Tr+Tf) : 5ms (typ.) (2)
GTG (Option) : 2ms
Viewing angle : 170 (H)/ 160 (V), typ (3)
Input interface : Analog (D-sub 15 pin)
Digital Option(DVI-D 24 pin)
Power management : Compatible with VESA DPMS
Plug & Play : VESA DDCCI
OSD language
Non EU version : English, French, German, Italian, Spanish, Chinese S. Chinese T. Japanese
EMEA version : English, French, German, Italian, Spanish, Dutch, Finnish, Russian
Russian version : Russian
Universal AC power supply
Note (1)(2)(3): This item spec depend on the LCD panel.
1.2 Accessories

Power cable VGA DVI Audio Warranty Quick-start Camera CD
Items HDMI cable
(option) cable Cable cable card Guide Wizard

Description 1.8m 1.8m 1.8m 1.8m 1.8m Multi Multi Multi



AC Power Cord(option) : 1.8 m. (Black. Cord type depend on sale region)
VGA cable : 1.8 m. (15 pin D-SUB, black cable with blue male connector)
Quick-start Guide : User manual English (640Mb CD)
Audio cable : 1.8m. (Green/Blue header)
DVI cable : 1.8 m. (18+1 pin, black cable with white connector)

2. Operation Specifications
The unit should suffer no visible cosmetic damage and should operate with no degradation in display quality during
exposure to the operating conditions and after exposure to the non-operating conditions, in any sequence.
2.1 Environmental conditions
2.1.1 Operating:
Temperature range : 0°C to 40°C

3
G235H
Service Manual
Relative humidity : 20% to 90%

2.1.2 Storage note 1:
Temperature range : -20°C to 60°C
Humidity range : 10% to 90%

2.1.3 Altitude note 2
Operating 10000 ft (Ta=50, t=24h)
Storage 40000 ft (Ta=30, t=24h )
Note 1: Temperature and relative humidity range must be in the area shown as the following figure due to panel limited
Note 2: Altitude spec must not over panel spec.




Figure 1 Absolute Ratings of Environment

2.2 Safety, EMC, Ergonomics and Compatibility Requirements
UL/ cUL, CE, CB, CCC, Nemko/Ergo, C-Tick (N214), VCCI,
Safety & EMC
FCC, CCC, BSMI,
Ergonomics Nemko/Ergo,MPR II,ISO13460-2
Compatibility Windows 98/Me/2000, Windows XP, Window Vista
Power Management Energy Star V4

2.3 Electrostatic Discharge Requirements
The subject unit must withstand 8KV for contact discharge and 15KV for air discharge of Electrostatic Discharge
and meet the standard of IEC61000-4-2(EN55024). (without discharge on VGA/DVI/HDMI pin)

Item Condition Spec Remark
Contact discharge : +/-4KV
150pF/330ohm.
Electrostatic Contact discharge : +/-8KV Each point 10
Acer SPEC
Discharge Air discharge : +/-8KV times.
1 time/Sec.
Air discharge : +/-15KV


2.4 Reliability
The MTBF of this product shall be greater than 50,000 hours excluding the LCD panel. The LCD panel life which is
defined as the time period for the maximum luminance to reduce to 50% of the initial value is 40,000 hours minimum at
the condition of displaying an all WHITE field at mid Brightness and Contrast settings.




4
G235H
Service Manual
3. Electrical and Optical Characteristics and Performance
3.1 Main Power Supply
3.1.1 Input characteristics
Items Condition Spec Note
AC Input Voltage range Universal input full range 90~264Vac
AC Input Voltage rating Universal input full range 100~240Vac
AC input frequency range 90~264Vac 47~63Hz
AC input frequency rating 100~240Vac 50~60Hz
AC Input Current 100Vac 1.5A(max)
240Vac 0.8A(max)
Inrush Current 115Vac,cold star,25°C 35A (max) See Note2
230Vac,cold star,25°C 70A(max)
AC-DC power Efficiency DC output full loading 80%
Note2. Before each test, the buck capacitor needs to be discharged.
Before each test, it must be 10 minutes at least after the latest test.
Hot star not component be damaged.




3.1.2 Output characteristics
Items Condition Spec Note
Ripple and Noise +25V output <2800mv System load, see note 3
+5V output <150mv
Audio +5V output: <500mv
+25V output <480mv Dummy load.
+5V output <100mv
Audio +5V output: <100mv
25V loading:0.3A~1.4A Vcc25V:23.8V~28V For system active.
5V loading:0.75A~1.8A Vcc5V: 4.75V~5.25V
DC Output Voltage Audio 5V: 0A~1.5A Audio 5V: 4.8V~5.4V
25v loading:0.1A~1.4A Vcc25V: 23.8V~30V For power saving or DC
25V loading: 0A Vcc5V: 4.75V~5.25V off.
DC output loading Vcc5V:1.8A,
capability Vcc25V:1.4A
Audio 5V: 1.5A
Rise Time <50mS
Hold-up time AC input: 100V~240V >10mS
Overshoot <10%
Turn on delay time 2S
Power management See Table-1
Note3: Paralleled a 0.1uF ceramic Cap. And 47uF aluminum Cap. Between the end of DC loading side, Measured
band-width=20MHz. Ripple voltage of +25V is less than 1500mV when enter into burst mode.
3.1.3 Protection characteristics
Protection Condition Spec

5
G235H
Service Manual
OPP nominal AC input 65W ( min )
SCP(short circuit protection) with auto-recovery function
OVP(Over voltage protection) Auto-recovery OTP(Over temperature protection) NA
Fuse protection NA

Table-1
Status H-sync V-sync Video Power LED
Power On on on active 55W Blue
off on blanked < 2W Yellow
Power Saving on off blanked < 2W Yellow
off off blanked < 2W Yellow
Power Off -- -- -- < 1W Off
3.1.4 Backlight Power Supply
Items Specification
Panel INL_MT230DW01 V.0
Lamp 4 CCFL
Input Voltage 23.8---28V
Input current 1.2A (Typ.), 1.40A (Max.)
2.0V V on 3.6 V (on)
On/Off switch level
-0.3v V off 0.8 V (off)
Brightness PWM Duty (ACM Off) 35%~100%
Brightness PWM Duty (ACM On) 3%~100%
CCFL operating Voltage 900Vrms (Typ.),
3.0mA (Min.)
CCFL Current 7.5mA (Typ.)
8.0mA (Max.)
CCFL startup voltage 1500 Vrms (25°C)
CCFL startup voltage 1840 Vrms (0°C)
Operating frequency 40~60 KHz
Protect delay time > 1 second
Efficiency 75%
Note: Other panels please refer to the reference panel specs.


3.2 Brightness output
The test to verify specifications in this section shall be performed under the following standard conditions unless otherwise
noted.

Temperature : 25 ± 5°C
Test pattern : white
Video Resolution : 1920 x 1080
Video input level : 700 mV ± 2%
Warm-up time : 30 minutes

Set brightness control and also contrast control at maximum, to measure the screen center, the light output shall 250

6
G235H
Service Manual
cd/m2 (as panel spec)



3.3 White balance
The test standard conditions refer to Sec 3.3.(Brightness control is at 100 contrast control is at 50 )

Chromaticity Coordinate
Mode
x y
Cool 9300K 0.283 ± 0.030 0.297 ± 0.030
Warm 6500K 0.313 ± 0.030 0.329 ± 0.030
User Panel While x Panel While y



3.4 Brightness uniformity
The test standard conditions refer to Sec 3.4.
Min. luminance of nine points (backlight) (4)
75%
75%
Max. luminance of nine points (backlight )




L/2 L/10

W/10
4 5 6

1 2 3
7 8 9



W/2


Fig.3
Note (4): 75% is for InnoLux panel MT230DW01 V.0(first source).The second source panel spec follow Sec 5.1.
3.5 Audio Signal

Items Specification
Input impedance 10K ohm

Frequency response range 200Hz ­20kHz

Signal to noise ratio 40 dB

Output power 1.5 W + 2 W(±20% tolerance), THD 10%.

Loading impedance 4 ohm


4. Input / Output Signal Specifications
4.1 Video signals
Analog RGB signal: 0.7Vp-p (Input impedance = 75 Ohm)
Sync: TTL level (Input impedance 1k Ohm)

7
G235H
Service Manual
Positive and negative sync of Separate Horizontal/Vertical Sync
Digital : TMDS Signal: (min) ±200mVpp@24Bit
4.2 Signal Timing
Through D-SUB/DVI/HDMI connectors, this unit can support FH= 31~84 KHz, Fv=56~75Hz, with maximum pixel clock
180MHz input signal and UXGA+ output. Modes details as below:

VESA MODES
Horizontal Vertical
Nominal
Mode Resolution Total Nominal Nominal Pixel Clock
Sync Sync (MHz)
Frequency Frequency
Polarity Polarity
+/-0.5KHz +/-1Hz
640*480@60Hz 800*525 31.469 N 59.941 N 25.175
VGA
640*480@72Hz 832*520 37.861 N 72.809 N 31.500
800*600@56Hz 1024*625 35.156 P 56.250 P 36.000
SVGA 800*600@60Hz 1056*628 37.879 P 60.317 P 40.000
800*600@72Hz 1040*666 48.077 P 72.188 P 50.000
1024*600@60Hz 1312*622 37.32 P 60.000 P 48.964
1024*768@60Hz 1344*806 48.363 N 60.004 N 65.000
XGA
1024*768@70Hz 1328*806 56.476 N 70.069 N 75.000
1152*864@75Hz 1600*900 67.500 P 75.000 P 108.000
VESA 1280*960@60Hz 1800*1000 60.000 P 60.000 P 108.000
1280*720@60Hz 1650*750 44.955 P 59.94 P 74.176
SXGA 1280*1024@60Hz 1688*1066 63.981 P 60.020 P 108.000
UXGA 1600*1200@60Hz 2160*1250 75.000 P 60.000 P 162.000
1360*768@60Hz 1792*795 47.712 P 60.015 P 85.500
WXGA
1280*800@60Hz 1680*831 49.702 P 59.810 P 83.500
WXGA+ 1440*900@60Hz 1904*931 55.935 P 59.887 N 106.500
WSXGA+ 1680*1050@60Hz 2240*1089 65.290 N 59.954 N 146.250
1920*1080@60Hz 2200*1125 67.500 N 60.000 P 148.500
UXGA+ 1920*1080@60Hz 2576*1120 67.158 N 59.963 P 173.000
1920*1080@60Hz 2080*1111 66.587 N 59.934 P 138.500
IBM MODES
VESA 720x400@70Hz 900*449 31.469 N 70.087 P 28.322
MAC MODES
640*[email protected] 864*525 35.000 P 66.667 P 30.240



HDMI Preset Timming
Mode Resolution Pixel Clock MHz H sync KHz V sync Hz
VGA 4:3 640 x 480p 25.2 31.5 60
NTSC (480i) 4:3 720 x 480 13.50 15.73 60
NTSC (480i) 16:9 720 x 480 13.50 15.73 60
NTSC (480p) 4:3 720 x 480 27.00 31.47 60
NTSC (480p) 16:9 720 x 480 27.00 31.47 60
PAL (576i) 4:3 720 x 576 13.50 15.63 50
PAL (576p) 4:3 720 x 576 27.00 31.27 50
PAL (576p) 16:9 720 x 576 27.00 31.27 50
720p 16:9 1280 x 720 74.25 37.5 50
720p 16:9 1280 x 720 74.25 44.96 60
1080i 16:9 1920 x 1080 74.25 28.125 50
8
G235H
Service Manual
1080i 16:9 1920 x 1080 74.25 33.72 60
1080P 16:9 1920 x 1080 148.50 56.250 50
1080P 16:9 1920 x 1080 148.50 67.50 60

Note: 1. Non-interlace signals only (An interlace signal cannot be display)
2. Please refer to F/W specification for more detail
3. Each frequency of Power Macintosh and Sun Ultra is a reference value

4.3 Timing requirements
The LCD monitor must be capable of displaying standard resolutions within the vertical frequency range of 56 ~ 75 Hz
and the horizontal scan range of 31~84 KHz with maximum pixel clock of 180MHz.
Vertical / Horizontal Sync polarity: positive or negative.
If input signal is out of range of horizontal 31~84 KHz or vertical 56-75Hz, or pixel clock large than 180MHz, message
"Input not Supported" is shown on screen.

4.4 DDC date
G235H Analog
0 1 2 3 4 5 6 7 8 9 A B C D E F
0
1
2
3
4
5
6
7



G235H DVI
0 1 2 3 4 5 6 7 8 9 A B C D E F
0
1
2
3
4
5
6
7

G235H HDMI(N/A)




9
G235H
Service Manual
5. Function Specifications
All the tests to verify specifications in this section shall be performed under the following standard conditions unless
otherwise noted. The standard conditions are:
Temperature : 25 ± 5°C
Warm-up time : 30 minutes minimum
Checking display modes : All the specified modes

5.1 Panel general specifications
5.1.1 General specifications

Supplier: INL
Model name MT230DW01 V.0
Display Area 509.184(H)x286.416(V) mm
Pixel Pitch 0.2652 x 0.2652 mm
Display Colors: 16.7 Million (RGB 8-bit data)
Number of Pixel 1920x1080 pixels
Pixel Arrangement RGB vertical stripe
Brightness 300cd/m2 (Typ.) 250cd/m2 (Min.)
Contrast Ratio 1000:1 (Typ.), 700:1(Min)
Viewing Angle Hor:150°, Ver: 140°(Min, CR>10)
Brightness Uniformity Min/Ma
Display Mode Normally White
Response Time(Tr+Tf) 5ms (Typ.), 10ms (Max.)
Surface Treatment Anti-glare, Hard coating (3H)
Lamp 4 CCFL
5.1.2 LCD module defects

LCD module defects check follows IIS.

5.2 Keypad Function
5.2.1 Control buttons
A. When OSD un-displays, press [AUTO] and the function menu will show on the screen;
[AUTO] B. When function menu displays, press [AUTO] to perform auto-adjustment;
C. When OSD displays, press [AUTO] to return to previous level menu;
D. When "e Color OSD" OSD displays, press [AUTO] to exit the OSD.
A. When OSD isn't shown on screen, press [MENU] to enter the function menu;
[MENU] B. When function menu displays, press [AUTO] to enter the main menu OSD;
C. When OSD displays, press [MENU] to perform function of menu icon that is highlight or
enter next level menu

A. When OSD isn't show on screen, press [] to enter the function menu;
[]
B. When "MENU OSD" displays, press these keys to change the contents of an
adjustment item, or change an adjustment value;
C. When Function menu displays, press [] to show "Audio" OSD and decrease the
volume.
A. When OSD isn't show on screen, press []to enter the function menu;
B. When "MENU OSD" displays, press these keys to change the contents of an
[] adjustment item, or change an adjustment value;
C. When Function menu displays:
a. Press [] key one time to search (a port with signal in order)
10
G235H
Service Manual
b. Show "source icon" at the same time, as searching that port
c. Go into next port automatically, if search the port without signal
d. Display it, if search the port with signal
D. When the volume menu displays, press [] to increase the volume.
A. When function menu displays, press [e Color] to show "e Color OSD", and press
again the OSD can not disappear, but the time of "e Color OSD "disappearing is reset
to 10 seconds again.
[e Color ]
B. When OSD disappear not including "e Color OSD", press [e Color] to show "e Color
OSD" OSD, the OSD before disappears, but the parameters of it should be saved


[POWER] Power on or power off the monitor



5.2.2 Hot Key Operation


HOT KEY OPERATION
FUNCTION DESCRIPTION
e Color AUTO MENU POWER


Press [e], and then press [POWER] for DC
FACTORY
MODE
ON power on. OSD menu will be shown with "F" on
the left top. Select "F" for entering factory mode.



5.3 OSD Structure
The On-Screen Display (OSD) shall be an easy to use icon based menu through keypad OSD buttons or remote control
unit. The unit shall leave the factory with all OSD controls set to their default values.
Control
First Second Third Fourth Default Value
Range

e-color empowering --- --- ---
technology
Auto --- --- --- ---
Function
Menu Main menu Main menu (Pictiure) --- --- ---

Audio Audio menu --- --- ---

Input --- --- --- ---

Picture Acer eColor Management empowering --- --- Standard
technology
77
User mode
Text mode 44

Brightness --- --- 0100 Standard mode 77

97
Graphics mode
77
Movie mode
Contrast --- --- 0100 50
User mode
50
Text mode
50
Standard mode
60
Graphics mode


11
G235H
Service Manual
56
Movie mode
H.Position 0100 50

V.Position 0100 50
--- ---
Focus 0100 ---

Clock 0100 50 1


Warm --- --- Default

Cool --- --- ---

Colour Temp Red 0100 80

User Green 0100 80

Blue 0100 80

Auto Config --- --- --- ---

OSD OSD Timeout --- --- 10120 10

Full --- --- Default
Wide Mode
Aspect --- --- ---

DDC/CI --- --- --- ON

ACM --- --- --- OFF

Analog --- --- ---

Source Digital --- --- ---

HDMI --- --- ---

EMEA NO-EMEA --- ---

Setting English English --- ---

Russian --- ---

Deutsch Deutsch --- ---

Language Français Français --- --- English

Español Español --- ---

Italiano Italiano --- ---

Dutch --- ---

Finnish --- ---

Reset --- --- --- ---

Resolution --- --- --- ---

H.Freq --- --- --- ---

Info V.Freq --- --- --- ---

Input Type --- --- --- ---

S/N --- --- --- ---

Volume --- --- --- 0~100 50

Notes; 1 Clock default 50 is for Visa timing. Others depend on timing.



12
G235H
Service Manual
6. SOP of PCBA ISP Programming
6.1 Operational condition:
Equipment: PC, ISP card, signal cable and power cable.
ESD requirements: antistatic wrists, antistatic gloves(fingers), and connecting cable
Name of ISP program : ISP_Tool_V4.4.2.4
Manufacture of FW IC : PMC/SST/MX

6.2 Operational steps:
1. Connection: connect PC to PCBA with signal cable, and then keep AC and DC in open state.




Signal cable



One port of ISP
program card is
connected to PC



2. Adjust ISP programming
Firstly, double click ISP_Tool_ V4.4.2.4 exit and click "Connect " button; The ISP tool will connect to
monitor automatically, and it will show flash IC type automatically




13
G235H
Service Manual
Secondly download FW software: first select "READ", and then load FW software in Rooter
(Fig.2).




Software
Checksum value

FW BIN file




Thirdly, select "AUTO", and keep its default value. Click "RUN" for beginning programming. There will
be prompting if programming is OK.




14
G235H
Service Manual
Note: if programming fails or success rate is not high, click "Config" and adjust its speed to lower
in "I2C Speed Setting"and check Communication Setting. If connect port is print port, please check
port type.




15
G235H
Service Manual
3. Flow Chart




16
G235H
Service Manual
7. SOP of EDID

7.1 Request of hardware and software:
1. Software
a.port95nt.exe
b.Edid.exe
c.G235H model
2. Hardware
a. PC(winXP or win2000) 1PCS;
b. Tool(EDID Card, VGA cable & DVI cable)

7.2 Operational steps:
1. First set up Port95nt.exe




17
G235H
Service Manual
2. Click next button continually then can finish setting.




18
G235H
Service Manual
EDID Tool Set up




C
B
A




C
B
A




A : USB interface provide +5V DC power No Power is ok
B : Connect DDC Card and PC with collateral interface
C :VGA DVI use different cable to link DDC and PC



19
G235H
Service Manual
EDID ISP Card:




C
A




B

A Collateral printing interface (connect with PC)
B : VGA interface (one VGA connect with PC to provide signal for monitor the other one connect with
PC VGA interface to write VGA EDID, Write EDID can without providing signal)
C : DVI interface (connect with Monitor)




20
G235H
Service Manual
3. Write EDID Process

3.1 Choose File menu in main menu choose Auto Write button click S/N blank .




G235H




21
G235H
Service Manual
3.2 Cloose the Model in main menu, and the password is 1234.




G235H




22
G235H
Service Manual
3.3 Choose the model, G235H_A(Update VGA) ,G235H_D(Update DVI), G235H_H(Update HDMI).




G235H G235H_A
G235H_D
G235H_H




23
G235H
Service Manual
3.4 Input S/N in the Blank , eg:ETLA10C109805111D94023 the program can write directly.




G235H




24
G235H
Service Manual
3.5 After the process is ok , the program can check that automatically




G235H




25
G235H
Service Manual
3.6 If write successfully , you can see PASS in the right




G235H




G235H




26
G235H
Service Manual
02. Flat Panel Specification




27
SPEC NO. M T 2 3 0 D W 0 1 V. 0

PAGE 5/23




B. Electrical specifications
1. Pin assignment
Connector
FOXCONN GS23302-0311S-7F or mechanical interface equivalent connector.

No Symbol Description

1 RxO0- LVDS Differential data input Channel 0(-)
2 RxO0+ LVDS Differential data input Channel 0(+)
3 RxO1- LVDS Differential data input Channel 1(-)
4 RxO1+ LVDS Differential data input Channel 1(+)
5 RxO2- LVDS Differential data input Channel 2(-)
6 RxO2+ LVDS Differential data input Channel 2(+)
7 GND Ground
8 RxOC- LVDS Differential Clock input (-)
9 RxOC+ LVDS Differential Clock input (+)
10 RxO3- LVDS Differential data input Channel 3(-)
11 RxO3+ LVDS Differential data input Channel 3(+)
12 RxE0- LVDS Differential data input Channel 0(-)
13 RxE0+ LVDS Differential data input Channel 0(+)
14 GND Ground
15 RxE1- LVDS Differential data input Channel 1(-)
16 RxE1+ LVDS Differential data input Channel 1(+)
17 GND Ground
18 RxE2- LVDS Differential data input Channel 2(-)
19 RxE2+ LVDS Differential data input Channel 2(+)
20 RxEC- LVDS Differential Clock input (-)
21 RxEC+ LVDS Differential Clock input (+)
22 RxE3- LVDS Differential data input Channel 3(-)
23 RxE3+ LVDS Differential data input Channel 3(+)
24 GND Ground
25 NC No Connection
26 NC No Connection
27 NC No Connection
28 VCC Power supply (+5.0V)
29 VCC Power supply (+5.0V)
30 VCC Power supply (+5.0V)
SPEC NO. M T 2 3 0 D W 0 1 V. 0

PAGE 6/23




Top view of LVDS connector




Rear view of LCM
SPEC NO. M T 2 3 0 D W 0 1 V. 0

PAGE 7/23

2. Absolute maximum ratings

Values
Parameter Symbol Unit Remark
Min. Typ. Max.

Power voltage Vcc -0.3 - 6.0 V At 25

Input signal voltage VLH -0.3 - 4.3 V At 25

Operating temperature Top 0 - 50 °C Note 1

Storage temperature TST -20 - 60 °C Note 2

CCFL Current ICFL 3.0 7.5 8.0 [mA]rms

Note 1: The relative humidity must not exceed 90% non-condensing at temperatures of 40°C or less.
At temperatures greater than 40°C, the wet bulb temperature must not exceed 39°C.
Note 2: The unit should not be exposed to corrosive chemicals.
SPEC NO. M T 2 3 0 D W 0 1 V. 0

PAGE 8/23

3. Electrical characteristics
a. Typical operating conditions

Item Symbol Min. Typ. Max. Unit Remark

Input Voltage Vcc 4.5 5 5.5 V


Permissive Power Input Ripple VRF - - 400 mVp-p

Black Icc - 1000 - Note 1

Input Current White Icc - 800 - mA Note 2

Mosaic Icc - 950 - Note 3

Rush Current IRush - 1.6 3 A Note 4

Logic Input Common Mode Voltage VCM - 1.2 - V

Voltage Differential Input Voltage VID 100 - 100 mV
LVDS:
Threshold Voltage (High) VTH - - 600 mV Note 5, 6
IN+, IN-
Threshold Voltage (Low) VTL -100 - - mV Note 5, 6

Note 1: The specified current is under the Vcc =5V, 25 °C, fv=60Hz (frame frequency) condition
whereas black pattern is displayed.
Note 2: The specified current is under the Vcc =5V, 25 °C, fv=60Hz (frame frequency) condition
whereas white pattern is displayed.
Note 3: The specified current is under the Vcc =5V, 25 °C, fv=60Hz (frame frequency) condition
whereas mosaic pattern (black & white [8*6]) is displayed.
White: 255 Gray
Black: 0 Gray
SPEC NO. M T 2 3 0 D W 0 1 V. 0

PAGE 9/23

Note 4: Test condition:
(1). VDD = 5 V, VDD rising time = 470 µs ± 10%
(2). Pattern: Mosaic pattern

90%



VDD




Ton=470 s 10%

(3) Test circuit

5V M1
2SK1059

VDD (LCD INPUT)
FUSE
R1 C1
47K 1uF


R2
CONTROL SIGNAL M2
1K 2SK1399
(HIGH to LOW)
12V

R3 C2


C3 47K
10000pF
1uF
Note 5: LVDS signal definition




VIN+ = Positive differential DATA & CLK Input
VIN- = Negative differential DATA & CLK Input
VID = VIN+ ­ VIN- ,
VCM = VCM+­VCM- ,
VID = VID+­VID- ,
VID+ = VIH+­VIH- ,
VID- = VIL+­VIL- ,
VCM = (VIN+ +VIN-)/2,
VCM+ = (VIH+ +VIH-)/2,
VCM- = (VIL+ +VIL-)/2,
SPEC NO. M T 2 3 0 D W 0 1 V. 0

PAGE 10/23


Note 6: Power on sequence for LCD VDD


T1
90% T6 T7
Panel Power
Supply VDC 90%
10%
90% 90% T5
10% 10%
Interface
Signals Valid Interface Data


T2
90% 90%
Backlight Power
Supply




T3 T4


Parameter Value Unit
Min Typ. Max ms
T1 0.1 - 10 ms
T2 0 30 50 ms
T3 200 250 - ms
T4 100 250 - ms
T5 0 20 50 ms
T6 0.1 - - ms
T7 1000 - - ms
SPEC NO. M T 2 3 0 D W 0 1 V. 0

PAGE 11/23


b. Display color vs. input data signals
The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input
for the color; the higher the binary input, the brighter the color. The table below provides a reference for
color versus data input.


Input color data

Color Red Green Blue
MSB LSB MSB LSB MSB LSB

R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0


Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red(255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Green(255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
Basic Blue(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
colors Cyan 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Magenta 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
Yellow 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Red(000) dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red(001) 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red(002) 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red : : : : : : : : : : : : : : : : : : : : : : : : :
Red(253) 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red(254) 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red(255) bright 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

Green(000)dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Green(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0
Green(002) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0
Green : : : : : : : : : : : : : : : : : : : : : : : : :
Green(253) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1 0 0 0 0 0 0 0 0
Green(254) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0
Green(255)bright 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0

Blue(000) dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Blue(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
Blue(002) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0
Blue : : : : : : : : : : : : : : : : : : : : : : : : :
Blue(253) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1
Blue(254) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0
Blue(255) bright 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
SPEC NO. M T 2 3 0 D W 0 1 V. 0

PAGE 12/23

c. Input signal timing
Support Input Timing Table
Item Description Min. Typ. Max. Unit
period 11.43 13.89 16.7 nS
Clock Dclk
frequency 60 72 87.5 MHz
TV_TOTAL V total line number 1090 1100 1160 TH_TOTAL
TV_DATA Data duration 1080 1080 1080 TH_TOTAL
Vertical
TVB V-blank 10 20 80 TH_TOTAL
fV frequency 50 60 75 Hz
TH_TOTAL H total pixel number 1008 1088 1120 DClk
Horizontal TH_DATA Data duration 960 960 960 DClk
THB H-blank 40 128 160 DClk
Note: Because this module is operated by DE mode only, Hsync and Vsync input signals should be set to
low Logic level or ground. Otherwise, this module would operate abnormally.




INPUT SIGNAL TIMING DIAGRAM

Tv
Tvd Tvb

DE


Th

DCLK

Tc Thb Thd
DE
SPEC NO. M T 2 3 0 D W 0 1 V. 0

PAGE 13/23


d. Display Position

D(1,1) D(2,1) ...... D(960,1) ...... D(1919,1) D(1920,1)
D(1,2) D(2,2) ...... D(960,2) ...... D(1919,2) D(1920,2)
.
. .
. .
. .
. .
.
. ...... . ...... . .
D(1,540) D(2,540) ...... D(960,540) ...... D(1919,540) D(1920,540)
.
. .
. .
. .
. .
.
. ...... . ...... . .
D(1,1079) D(2,1079) ...... D(960,1079) ...... D(1919,1079) D(1920,1979)
D(1,1080) D(2,1080) ...... D(960,1080) ...... D(1919,1080) D(1920,1080)


e. Backlight driving conditions
Parameter Symbol Min. Typ. Max. Unit Remark Remark
Lamp voltage VL 810(8mA) 900(7.5mA) 990(3mA) Vrms
Lamp operation current IL 3.0 7.5 8.0 mArms Note 1
- - 1500 T = 25°C Note 2,3,4,5
Lamp starting voltage VLstart Vrms
- - 1800 T = 0°C Note 2,3,4,5
Frequency F 40 - 60 KHZ Note 5
Lamp lifetime 50,000 - - Hrs Note 6
Note: The waveform of the voltage output of inverter must be area-symmetric and the design of the
inverter must have specifications for the modularized lamp. The performance of the Backlight,
such as lifetime or brightness, is greatly influenced by the characteristics of the DC-AC inverter
for the lamp. All the parameters of an inverter should be carefully designed to avoid producing
too much current leakage from high voltage output of the inverter. When designing or ordering
the inverter please make sure that a poor lighting caused by the mismatch of the Backlight and
the inverter (miss-lighting, flicker, etc.) never occurs. If the above situation is confirmed, the
module should be operated in the same manners when it is installed in your instrument.
Note 1: The degree of unbalance: less than 10%
The ratio of wave height: less than 2 ± 10%




Ip Ip: high side peak


I-p I-p: low side peak

The degree of unbalance = |Ip-I-p| /Irms*100(%)
The ratio of wave height = Ip (or I-p)/Irms
Lamp should be completely turned on.
SPEC NO. M T 2 3 0 D W 0 1 V. 0

PAGE 14/23

Note 2: Test equipment: AS-114B

Note 3: The voltage shown above should be applied to the lamp for more than 1 second after startup.
Otherwise, the lamp may not be turned on normally.


Note 4: Inverter should provide more than max. value, and then lamp could be completely turned on.

Note 5: Lamp frequency may produce interference with horizontal synchronous frequency and this may
cause line flow on the display. Therefore lamp frequency shall be detached from the horizontal
synchronous frequency and its harmonics as far as possible in order to avoid interference.

Note 6: Life time (Hr) is defined as the time when brightness of a lamp unit itself becomes 50% or less
than its original value at the condition of Ta = 25±2°C and IL = 7.5mArms.




Backlight connecter: 3500IHS-02L

Pin no. Symbol Function Remark
1 VIH Lamp high voltage input Cable color: Pink
2 VIL Lamp low voltage input Cable color: White
3 VIH Lamp high voltage input Cable color: Blue
4 VIL Lamp low voltage input Cable color: Black
SPEC NO. M T 2 3 0 D W 0 1 V. 0

PAGE 15/23


C. Optical specifications
Specification
Item Symbol Condition Unit Remark
Min. Typ. Max.

Tr - 1.5 3

Response time
Tf = 0 - 3.5 7 ms Note 2

Tr+Tf - 5 10

Contrast ratio CR = 0 700 1000 - Note 1,3
CR 10 70 80
Top -
CR 5 75 85
CR 10 70 80
Bottom -
CR 5 75 85
Viewing angle deg. Note 1,3,5
CR 10 75 85
Left -
CR 5 80 89

CR 10 75 85
Right -
CR 5 80 89

Brightness (Center) YL 250 300 - nit Note 1,4

Wx 0.313
Wy