Text preview for : hfe_aiwa_csd-td20_td21_service_revision_en.pdf part of Aiwa CSD-TD20 CSD-TD21 COMPACT DISC STEREO RADIO CASSETTE RECORDER Service Manual
BASIC TAPE MECHANISM : TN-21ZVC-2000
BASIC CD MECHANISM : DA11T3C
Back to : hfe_aiwa_csd-td20_td21_se | Home
CSD-TD20 K
CSD-TD21 EZ, U
SERVICE MANUAL
COMPACT DISC / BASIC TAPE MECHANISM : TN-21ZVC-2000
STEREO CASSETTE RECORDER BASIC CD MECHANISM : DA11T3C
· This Service Manual is the "Revision Publishing" and replaces "Simple Manual",
(S/M Code No. 09-001-426-7T1).
N
SIO
VI
RE
TA
DA
S/M Code No. 09-003-426-7R1
SPECIFICATIONS
Tuner section General
Frequency range Speaker 100 mm cone type (2), 60 mm cone type (2)
FM : 87.5 MHz - 108.0 MHz Output Headphones jack (stereo mini-jack)
Antenna : Rod antenna Power output 2.5 W + 2.5 W (EIAJ 7 ohms DC)
AM : 530/531 kHz - 1,710/1,602 kHz
(10/9 kHz/step) Power requirements DC 12 V using eight R14 (size C) batteries,
Antenna : Ferrite bar antenna AC 120 V, 60 Hz
Power consumption 12 W
Deck section Dimensions (W x H x D) 435 (W) x 184 (H) x 277 (D) mm
Track format 4 tracks, 2 channels (171/4 x 71/4 x 11 in.)
Frequency range Normal tape : 50 Hz-12,500 Hz (EIAJ) Weight 3.7 kg (8 lbs. 3 oz.) (excluding batteries)
Recording system AC bias
Erasing system Magnet erase
Heads Recording/Playback head x 1/ · Design and specifications are subject to change without notice.
Erasure head x 1
CD player section
Disc Compact disc
Scanning methodd Non-contact optical scanner
(semiconductor laser)
SPECIFICATIONS
Tuner section General
Frequency range Speaker 100 mm cone type (2), 60 mm cone type (2)
FM : 87.5 MHz - 108.0 MHz Output Headphones jack (stereo mini-jack)
Antenna : Rod antenna Power output 2.9 W + 2.9 W (DIN MUSIC POWER)
MW : 531/530 kHz - 1,602/1,710 kHz 2.5 W + 2.5 W (EIAJ 7 ohms DC, T.H.D. 10%)
(9/10 kHz/step) 1.9 W + 1.9 W (DIN 1% Rated Power)
Antenna : Ferrite bar antenna Power requirements DC 12 V using eight R14 (size C) batteries,
LW : 153 - 288 kHz AC 230 V, 50 Hz
Antenna : Ferrite bar antenna Power consumption 16 W
Dimensions (W x H x D) 435 (W) x 184 (H) x 277 (D) mm
Deck section (171/4 x 71/4 x 11 in.)
Track format 4 tracks, 2 channels Weight 3.7 kg (8 lbs. 3 oz.) (excluding batteries)
Frequency range Normal tape : 50 Hz-12,500 Hz (EIAJ)
Recording system AC bias
Erasing system Magnet erase · Design and specifications are subject to change without notice.
Heads Recording/Playback head x 1/
Erasure head x 1
CD player section
Disc Compact disc
Scanning methodd Non-contact optical scanner
(semiconductor laser)
2
PROTECTION OF EYES FROM LASER BEAM DURING SERVICING
This set employs laser. Therefore, be sure to follow carefully the CAUTION
instructions below when servicing. Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
WARNING! radiation exposure.
WHEN SERVICING, DO NOT APPROACH THE LASER EXIT
WITH THE EYE TOO CLOSELY. IN CASE IT IS NECESSARY TO ATTENTION
CONFIRM LASER BEAM EMISSION. BE SURE TO OBSERVE L'utilisation de commandes, réglages ou procédures autres que
FROM A DISTANCE OF MORE THAN 30cm FROM THE ceux spécifiés peut entraîner une dangereuse exposition aux
SURFACE OF THE OBJECTIVE LENS ON THE OPTICAL radiations.
PICK-UP BLOCK.
ADVARSEL!
Caution: Invisible laser radiation when
Usynlig laserståling ved åbning, når sikkerhedsafbrydereer ude
open and interlocks defeated avoid expo-
af funktion. Undgå udsættelse for stråling.
sure to beam.
Advarsel:Usynling laserståling ved åbning,
This Compact Disc player is classified as a CLASS 1 LASER
når sikkerhedsafbrydere er ude af funktion.
product.
Undgå udsættelse for stråling.
The CLASS 1 LASER PRODUCT label is located on the rear
exterior.
VAROITUS!
Laiteen Käyttäminen muulla kuin tässä käyttöohjeessa mainit-
ulla tavalla saattaa altistaa käyt-täjän turvallisuusluokan 1 ylit-
CLASS 1 LASER PRODUCT
tävälle näkymättömälle lasersäteilylle. KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
VARNING!
Om apparaten används på annat sätt än vad som specificeras i
denna bruksanvising, kan användaren utsättas för osynling
laserstrålning, som överskrider gränsen för laserklass 1.
Precaution to replace Optical block
(SF-P101NR)
Body or clothes electrostatic potential could ruin
laser diode in the optical block. Be sure ground
body and workbench, and use care the clothes
do not touch the diode.
1) After the connection, remove solder shown in
the right figure.
Solder
PICK UP ASSY
SF-P101NR
1
16
TO/FROM CD C.B
3
ELECTRICAL MAIN PARTS LIST
REF. NO. PART NO. KANRI DESCRIPTION REF. NO. PART NO. KANRI DESCRIPTION
NO. NO.
IC C805 87-012-365-080 C-CAP,S 0.027-25VBK
C806 87-012-365-080 C-CAP,S 0.027-25VBK
87-A21-550-010 IC,TA2149N C807 87-010-405-080 CAP, ELECT 10-50V
87-A21-185-040 C-IC,LC72121M C808 87-010-405-080 CAP, ELECT 10-50V
87-A21-064-010 IC,LA4227 C809 87-010-401-080 CAP, ELECT 1-50V
87-A21-520-040 C-IC,M61509FP
87-A21-443-040 C-IC,M62495AFP C810 87-010-401-080 CAP, ELECT 1-50V
C811 87-010-178-080 CHIP CAP 1000P
87-A20-446-010 C-IC,LA9241ML C812 87-010-178-080 CHIP CAP 1000P
87-A20-459-010 C-IC,LC78622ED C816 87-010-180-080 C-CER 1500P
87-A21-093-010 IC,LA6541D C817 87-010-180-080 C-CER 1500P
8A-CH4-661-010 C-IC,LC867132V-5P07
87-A21-431-010 IC,BA4560N C821 87-010-401-080 CAP, ELECT 1-50V
C822 87-010-401-080 CAP, ELECT 1-50V
C823 87-010-178-080 CHIP CAP 1000P
TRANSISTOR C824 87-010-178-080 CHIP CAP 1000P
C829 87-010-178-080 CHIP CAP 1000P
87-026-237-080 C-TR,DTC124XK
89-327-143-080 TR,2SC2714 (0.1W) C830 87-010-178-080 CHIP CAP 1000P
87-026-447-080 TR,2SC1740SR C831 87-010-198-080 C-CAP, 0.22-25 K B
89-111-624-080 TR,2SA1162Y C834 87-010-248-080 CAP, ELECT 220-10V
87-026-213-080 CHIP-TR,DTC114YK C843 87-010-197-080 CAP, CHIP 0.01 DM
C844 87-018-124-080 CAP, CER 270P-50V
89-327-125-080 CHIP TR,2SC2712GR
89-503-025-010 C-FET,2SK302GR C845 87-010-178-080 CHIP CAP 1000P
89-318-154-080 TR,2SC1815 (0.4W) C846 87-010-263-080 CAP, ELECT 100-10V
89-112-965-080 TR,2SA1296 (0.75W) C851 87-010-186-080 CAP,CHIP 4700P
87-026-463-080 TR,2SA933S (0.3W) C852 87-010-178-080 CHIP CAP 1000P
C853 87-A11-145-080 CAP, TC U 0.01-50
87-026-291-080 TR,DTC124XS
89-213-702-080 TR,2SB1370E CN201 87-099-018-010 CONN,16P
89-320-011-080 TR,2SC2001K CN801 87-A60-110-010 CONN,4P V S2M-4W
87-026-462-080 TR,2SC1740 S(RS 0.3W) CNA302 8A-CD9-629-010 CONN ASSY, 6P MA-TU
89-109-332-380 TR,2SA933RS CNA801 8A-CD9-630-010 CONN ASSY, 4P RPH
FC201 8A-CD9-620-010 FF-CABLE, 16P FR-MAIN
89-113-187-080 TR,2SA1318TU
87-026-239-080 TR,DTC114TK L801 87-007-342-010 COIL,OSC 85K BIAS
87-026-210-080 TR,DTC144EK SW801 8Z-CD9-609-010 SW,SL 1-6-2 PS62D01
87-026-464-080 TR,DTC114TS (0.3W)
87-026-230-080 C-TR,DTA114YK
CD C.B
DIODE C30 87-010-260-080 CAP, ELECT 47-25V
C251 87-010-404-080 CAP, ELECT 4.7-50V
87-A40-234-080 ZENER,MTZJ5.6A C261 87-010-402-080 CAP,E 2.2-50 M
87-020-465-080 DIODE,1SS133 (110MA) C262 87-010-402-080 CAP,E 2.2-50 M
87-017-072-080 ZENER,HZS3B1 C263 87-010-178-080 CHIP CAP 1000P
87-027-703-080 ZENER,HZ7A1L
87-A40-648-080 ZENER,MTZJ8.2A C264 87-010-178-080 CHIP CAP 1000P
C265 87-010-263-080 CAP, ELECT 100-10V
87-070-345-080 DIODE,IN4148 C266 87-010-263-080 CAP, ELECT 100-10V
87-017-978-080 DIODE,1N4003 C267 87-010-112-080 CAP, ELECT 100-16V
87-027-702-080 DIODE,ZENER HZ6C2L (200MA) C268 87-010-112-080 CAP, ELECT 100-16V
87-A40-465-010 DIODE,FR202
87-027-399-080 ZENER,HZ7A3L C271 87-010-237-080 CAP, ELECT 1000-16V
C272 87-010-237-080 CAP, ELECT 1000-16V
C278 87-010-405-080 CAP, ELECT 10-50V
MAIN C.B C279 87-010-385-080 CAP, ELECT 220-25V
C301 87-016-495-000 CAP,E 3300-25 M SMG
C211 87-A11-603-080 CAP, S 0.15-16
C212 87-A11-603-080 CAP, S 0.15-16 C306 87-010-404-080 CAP, ELECT 4.7-50V
C215 87-016-460-080 C-CAP,S 0.22-16 B C307 87-010-401-080 CAP, ELECT 1-50V
C216 87-016-460-080 C-CAP,S 0.22-16 B C308 87-010-221-080 CAP, ELECT 470-10V
C231 87-010-213-080 C-CAP,S 0.015-50 B C311 87-010-263-080 CAP, ELECT 100-10
C312 87-010-385-080 CAP, ELECT 220-25V
C232 87-010-213-080 C-CAP,S 0.015-50 B
C233 87-A10-201-080 C-CAP,S0.33-16 KB C321 87-010-197-080 CAP, CHIP 0.01 DM
C234 87-A10-201-080 C-CAP,S0.33-16 KB C322 87-010-263-080 CAP, ELECT 100-10V
C235 87-016-669-080 C-CAP,S 0.1-25 K B C325 87-010-405-080 CAP, ELECT 10-50V
C236 87-016-669-080 C-CAP,S 0.1-25 K B C401 87-010-403-080 CAP, ELECT 3.3-50V
C402 87-010-197-080 CAP, CHIP 0.01 DM
C237 87-010-371-080 CAP, ELECT 470-6.3M
C239 87-010-197-080 CAP, CHIP 0.01 DM C403 87-010-263-080 CAP, ELECT 100-10V
C239 87-010-805-080 CAP, CHIP 1-16 Z F C404 87-010-248-080 CAP, ELECT 220-10V
C240 87-010-197-080 CAP, CHIP 0.01 DM C405 87-010-197-080 CAP, CHIP 0.01 DM
C240 87-010-805-080 CAP, CHIP 1-16 Z F C406 87-010-374-080 CAP, ELECT 47-10V
C407 87-010-178-080 CHIP CAP 1000P
C247 87-010-401-080 CAP, ELECT 1-50V
C248 87-010-401-080 CAP, ELECT 1-50V C408 87-010-198-080 CAP, CHIP 0.022
C310 87-010-248-080 CAP, ELECT 220-10V C409 87-010-248-080 CAP, ELECT 220-10V
C316 87-010-263-080 CAP,E 100-10 C410 87-010-263-080 CAP, ELECT 100-10V
C317 87-010-197-080 CAP, CHIP 0.01 DM C411 87-A11-177-080 C-CAP,S 0.15-16 K B
C412 87-010-401-080 CAP, ELECT 1-50V
C801 87-010-248-080 CAP, ELECT 220-10V
4
REF. NO. PART NO. KANRI DESCRIPTION REF. NO. PART NO. KANRI DESCRIPTION
NO. NO.
C413 87-016-369-080 C-CAP,S 0.033-25 B K C506 87-010-322-080 C-CAP,S 100P-50 CH
C414 87-010-405-080 CAP, ELECT 10-50V C510 87-016-669-080 C-CAP,S 0.01-25 K
C416 87-010-545-080 CAP, ELECT 0.22-50V C831 87-010-198-080 CAP, CHIP 0.022
C417 87-012-157-080 C-CAP,S 330P-50 CH CN202 8A-CH4-689-010 CONN,3P V 2.5
C418 87-010-213-080 C-CAP,S 0.015-25 B CN205 87-A60-109-010 CONN,2P V S2M-2W
C419 87-A11-608-080 C-CAP,S 0.33-25 K B CN301 8A-CH4-689-010 CONN,3P V 2.5
C420 87-016-369-080 C-CAP,S 0.033-25 B K CN401 87-A60-424-010 CONN,16P V TOC-B
C421 87-A11-177-080 C-CAP,S 0.15-16 K B CN403 87-099-201-010 CONN,8P 6216 H
C422 87-010-184-080 C-CAP,S 3300P-50 K B CN802 8A-CH4-687-010 CONN,4P V 2.5
C423 87-010-992-080 CHIP-CAP,S 0.047-25 CNA205 8A-CD9-626-010 CONN ASSY,2P DOOR
C424 87-A11-606-080 C-CAP,S 0.22-25 K B CNA402 8A-CD9-625-010 CONN ASSY,6P CD-ME
C425 87-010-176-080 C-CAP,S 680P-50 SL CNA802 8A-CD9-631-010 CONN ASSY,4P TP-ME
C426 87-A11-608-080 C-CAP,S 0.33-25 K B FC401 8A-CD9-621-010 FF-CABLE, 16P CD-RF
C428 87-010-197-080 CAP, CHIP 0.01 DM FC403 8A-CD9-622-010 FF-CABLE, 8P CD-FR
C429 87-010-186-080 CAP,CHIP 4700P L401 87-003-102-080 COIL, 10UH
C430 87-012-156-080 C-CAP,S 220P-50 CH L404 87-003-152-080 COIL, 100UH
C431 87-010-545-080 CAP, ELECT 0.22-50V R840 87-029-124-010 RES,FUSE 2.2-1/4
C432 87-010-374-080 CAP, ELECT 47-10V SFR430 87-024-437-080 SFR,100K H RH063MC
C433 87-010-401-080 CAP, ELECT 1-50V SW205 87-036-389-010 SW, PUSH 1-1-1 R8120125
C434 87-010-184-080 CHIP CAPACITOR 3300P(K) X401 8Z-CD5-633-010 VIB, CER16.93MHZ FCR16.93M2
C435 87-010-197-080 CAP, CHIP 0.01 DM
C436 87-010-374-080 CAP, ELECT 47-10V FRONT C.B
C437 87-010-404-080 CAP, ELECT 4.7-50V
C438 87-016-669-080 C-CAP,S 0.1-25 K B C601 87-010-313-080 CAP, CHIP 18P
C439 87-010-178-080 CHIP CAP 1000P C602 87-010-315-080 C-CAP,S 27P-50 CH
C603 87-010-319-080 C-CAP,S 56P-50 CH
C440 87-010-145-080 C-CAP, S 1P-50 C CH C604 87-010-312-080 C-CAP,S 15P-50 CH
C441 87-010-197-080 CAP, CHIP 0.01 DM C605 87-010-317-080 C-CAP,S 39P-50 CH
C442 87-010-313-080 C-CAP,S 18P-50 CH
C445 87-012-368-080 C-CAP,S 0.1-50 F C607 87-A10-826-080 CHIP CAPACITOR,S 1-10 K B
C446 87-012-368-080 C-CAP,S 0.1-50 F C608 87-010-196-080 CHIP CAPACITOR,0.1-25
C612 87-A10-189-040 CAP,E 220-10
C447 87-012-368-080 C-CAP,S 0.1-50 F C613 87-010-495-040 CAP,E 2.2-50 GAS
C448 87-010-315-080 C-CAP,S 27P-50 CH C614 87-010-196-080 CHIP CAPACITOR,0.1-25
C450 87-012-140-080 C-CAP,S 470P-50
C451 087-012-156-080 C-CAP,S 220P-50 CH C615 87-010-493-040 CAP,E 0.47-50 GAS
C455 87-010-247-080 CAP, ELECT 100-50 M SME C616 87-010-494-040 CAP,E 1-50 GAS
C620 87-015-785-080 CHIP CAPACITOR, 0.1FZ-25Z
C457 87-010-312-080 C-CAP,S 15P-50 CH C627 87-A10-826-080 CHIP CAPACITOR,S 1-10 K B
C458 87-010-312-080 C-CAP,S 15P-50 CH CN601 87-099-033-010 16P 6216 H
C459 87-010-263-080 CAP, ELECT 100-10V
C460 87-015-819-080 CAPACITOR,0.01 CN602 87-099-201-010 CONN,8P 6216 H
C461 87-010-197-080 CAP, CHIP 0.01 DM CNA603 8A-CD9-624-010 CONN ASSY,4P TU-FR
CNA604 8A-CH9-623-010 CONN ASSY,2P KEY
C462 87-010-248-080 CAP, ELECT 220-10V L601 87-003-102-080 COIL, 10UH J LAL02
C463 87-010-197-080 C-CAP,S 0.01-25 K B L690 87-003-231-080 C-COIL, 2125 1UH K
C465 87-010-404-080 CAP, ELECT 4.7-50V
C466 87-012-368-080 C-CAP,S 0.1-50 F L691 87-003-231-080 C-COIL, 2125 1UH K
C467 87-010-263-080 CAP, ELECT 100-10V LCD601 8Z-CH4-635-010 LCD,HLC7365 ZCH-4
LED601 88-CD6-630-010 LED,934ID RED
C469 87-012-154-080 C-CAP,S 150P-50 CH LED602 88-CD6-630-010 LED,934ID RED
C470 87-010-544-080 CAP, ELECT 0.1-50V LED603 88-CD6-630-010 LED,934ID RED
C471 87-010-196-080 CHIP CAPACITOR, 0.1FZ-25Z
C472 87-015-785-080 CHIP CAPACITOR, 0.1FZ-25Z LED604 88-CD6-630-010 LED,934ID RED
C473 87-010-196-080 CHIP CAPACITOR, 0.1FZ-25Z LED606 88-CD6-630-010 LED,934ID RED
LED607 88-CD6-630-010 LED,934ID RED
C474 87-015-785-080 CHIP CAPACITOR, 0.1FZ-25Z LED608 88-CD6-630-010 LED,934ID RED
C475 87-010-197-080 CAP, CHIP 0.01 DM LED610 88-CD6-631-010 LED,934GD GRN
C476 87-010-236-080 CAP,E 1000-10 SME
C477 87-010-197-080 CAP, CHIP 0.01 DM S601 87-A91-704-080 SW,TACT EVQ 214 05R
C478 87-010-263-080 CAP, ELECT 100-10V S602 87-A91-704-080 SW,TACT EVQ 214 05R
S603 87-A91-704-080 SW,TACT EVQ 214 05R
C479 87-010-197-080 CAP, CHIP 0.01 DM S604 87-A91-704-080 SW,TACT EVQ 214 05R
C480 87-010-221-080 CAP, ELECT 470-10V S605 87-A91-704-080 SW,TACT EVQ 214 05R
C481 87-010-405-080 CAP, ELECT 10-50V
C482 87-010-405-080 CAP, ELECT 10-50V S606 87-A91-704-080 SW,TACT EVQ 214 05R
C489 87-012-368-080 C-CAP,S 0.1-50 F S607 87-A91-704-080 SW,TACT EVQ 214 05R
S608 87-A91-704-080 SW,TACT EVQ 214 05R
C490 87-012-368-080 C-CAP,S 0.1-50 F S614 87-A91-704-080 SW,TACT EVQ 214 05R
C491 87-010-197-080 CAP, CHIP 0.01 DM X601 87-030-273-010 VIB,XTAL 32.768K5PPM
C492 87-010-221-080 CAP, ELECT 470-10V
C494 87-010-197-080 CAP, CHIP 0.01 DM X602 87-030-376-080 VIB,CER CSA5.76MG200
C495 87-016-669-080 C-CAP,S 0.01-25 K
C501 87-012-368-080 C-CAP,S 0.1-50 F TUNER C.B
C502 87-010-322-080 C-CAP,S 100P-50 CH
C503 87-010-322-080 C-CAP,S 100P-50 CH C1 87-010-314-080 C-CAP,S 22P-50V
C504 87-010-322-080 C-CAP,S 100P-50 CH C2 87-010-316-080 C-CAP,S 33P-50 CH
C505 87-010-322-080 C-CAP,S 100P-50 CH C3 87-010-314-080 C-CAP,S 22P-50V
C5 87-016-669-080 C-CAP,S 0.1-25 K B
5
REF. NO. PART NO. KANRI DESCRIPTION REF. NO. PART NO. KANRI DESCRIPTION
NO. NO.
C5 87-012-360-080 C-CAP,S 1-10 Z F L6 87-A50-567-010 COIL,FM OSC(ACH)
C6 87-010-313-080 CAP, CHIP 18P L7 87-A91-308-010 FLTR,PCFAZH- 450T (TOK)
C7 87-014-049-080 CAP,PP 470P-100 J L8 87-005-849-080 COIL,10UH(CECS)
C8 87-010-178-080 CHIP CAP 1000P L51 87-A50-421-010 COIL, LW OSC(SYN)
C10 87-010-197-080 CAP, CHIP 0.01 DM TC1 87-011-254-080 TRIMER,20P LAR
C11 87-010-197-080 CAP, CHIP 0.01 DM TC51 87-A91-659-010 TRIMMER,50P 4.0X4.5 ECRL
C12 87-010-197-080 CAP, CHIP 0.01 DM X1 87-A70-061-010 VIB,XTAL 4.500MHZ CSA-309
C13 87-010-150-080 C-CAP,S 6P-50 CH
C14 87-010-303-080 C-CAP,S 330P-50CH
C15 87-010-178-080 CHIP CAP 1000P H.P. C.B
C16 87-010-374-080 CAP, ELECT 47-10V CN204 87-A60-685-010 CONN,4P H WHT
C17 87-010-198-080 CAP, CHIP 0.022 CN605 87-A60-113-010 CONN,2P H S2M-2WR
C18 87-015-835-080 C-CAP,0.047 D CNA203 8A-CD9-628-010 CONN ASSY,3P MA-HP
C19 87-010-263-080 CAP, ELECT 100-10V CNA204 8A-CD9-633-010 CONN ASSY,4P SP
C20 87-010-404-080 CAP, ELECT 4.7-50V J251 87-A60-569-010 JACK,HTJ-035-18
C21 87-010-197-080 CAP, CHIP 0.01 DM S609 87-A91-704-080 SW,TACT EVQ 214 05R
C22 87-010-197-080 CAP, CHIP 0.01 DM S610 87-A91-704-080 SW,TACT EVQ 214 05R
C23 87-010-197-080 CAP, CHIP 0.01 DM S611 87-A91-704-080 SW,TACT EVQ 214 05R
C24 87-010-303-080 C-CAP,S 330P-50CH S612 87-A91-704-080 SW,TACT EVQ 214 05R
C25 87-016-460-080 C-CAP,S 0.22-16 B S613 87-A91-704-080 SW,TACT EVQ 214 05R
C27 87-A11-067-080 C-CAP,S 1-10 K B
C28 87-016-669-080 C-CAP,S 0.1-25 K B BATT1 C.B
C29 87-016-669-080 C-CAP,S 0.1-25 K B
C30 87-010-198-080 CAP, CHIP 0.022 C901 87-010-192-080 C-CAP,S 0.22-50 Z F
C30 87-010-213-080 C-CAP,S 0.015-25 K B C902 87-010-192-080 C-CAP,S 0.22-50 Z F
C903 87-010-192-080 C-CAP,S 0.22-50 Z F
C31 87-010-198-080 CAP, CHIP 0.022 C904 87-010-192-080 C-CAP,S 0.22-50 Z F
C31 87-010-213-080 C-CAP,S 0.015-25 K B CNA901 8A-CD9-627-010 CONN ASSY,3P PWR
C33 87-012-358-080 C-CAP,S 0.47-10 F Z
C34 87-012-358-080 C-CAP,S 0.47-10 F Z ! PT901 8A-CD9-606-010 PT,U 2.5W
C35 87-015-819-080 CAPACITOR,0.01 ! PT901 8A-CD8-603-010 PT,E
! PR901 87-A90-092-080 PROTECTOR,2.5A 491SERIES 60
C36 87-010-263-080 CAP, ELECT 100-10V
C37 87-010-197-080 CAP, CHIP 0.01 DM
C38 87-010-374-080 CAP, ELECT 47-10V BATT2 C.B
C39 87-010-404-080 CAP, ELECT 4.7-50V
C40 87-010-197-080 CAP, CHIP 0.01 DM
MOTOR C.B
C41 87-010-178-080 CHIP CAP 1000P
C42 87-010-178-080 CHIP CAP 1000P M2 9X-262-576-910 MOTOR GEAR ASSY
C43 87-010-178-080 CHIP CAP 1000P PIN3 91-564-722-110 CONNECTOR 6P
C44 87-010-311-080 CAP 12P SW1 91-572-085-120 LEAF SW
C45 87-010-312-080 C-CAP,S 15P-50 CH
C46 87-010-197-080 CAP, CHIP 0.01 DM
C47 87-010-197-080 CAP, CHIP 0.01 DM
C48 87-010-197-080 CAP, CHIP 0.01 DM
C49 87-012-140-080 CAP 470P
C50 87-010-197-080 CAP, CHIP 0.01 DM
C51 87-010-316-080 C-CAP,S 33P-50
C52 87-010-197-080 CAP, CHIP 0.01 DM
C53 87-010-197-080 CAP, CHIP 0.01 DM
C54 87-014-055-080 CAP, 820-100J
C55 87-010-197-080 CAP, CHIP 0.01 DM
C71 87-010-197-080 CAP, CHIP 0.01 DM
C72 87-010-263-080 CAP, ELECT 100-10V
C73 87-010-197-080 CAP, CHIP 0.01 DM
C75 87-010-197-080 CAP, CHIP 0.01 DM
C91 87-012-140-080 CAP 470P
C92 87-010-197-080 CAP, CHIP 0.01 DM
C93 87-010-197-080 CAP, CHIP 0.01 DM
CF1 87-A91-094-010 FLTR,CDA10.7 MG80A
CF2 87-008-261-010 FILTER, SFE10.7MA5-A
CF3 87-008-261-010 FILTER, SFE10.7MA5-A
CN2 87-099-854-010 CONN,6P S2M-6W
CN3 87-A60-110-010 CONN,4P V S2M-4W
D3 87-A40-616-070 VARI-CAP,SVC384(S/T)
D4 87-A40-128-080 C-VARI-CAP,HVU202A
D5 87-A40-128-080 C-VARI-CAP,HVU202A
L2 87-A50-560-010 COIL,FM BPF(ACD)
L3 8A-CH4-670-010 BAR-ANT,MW 2B-ACH(COI)
L3 8A-CH4-671-010 BAR-ANT,MW/LW 3B-ACH(COI)
L4 87-A50-420-010 COIL,MW OSC(SYN)
L5 87-A50-566-010 COIL,FM RF EX(ACH)
6
TRANSISTOR ILLUSTRATION
C
B
E
E C B B C E E C B
2SA933S 2SB1370 2SA1296 2SA1162Y
2SA933RS 2SC1815 2SC2712
2SC1740S 2SC2714
2SC1740SR DTA114YK
DTC114TS DTC114TK
DTC124XS DTC114YK
DTC124XK
DTC144EK
S
D
G
E C B E C B
2SA1318 2SC2001 2SK302
CHIP RESISTOR PART CODE
Chip Resistor Part Coding
8 8
A
Figure
Resistor Code
Value of resistor
Chip resistor
Dimensions (mm) :A
Wattage Type Tolerance Symbol Form L W t Resistor Code : A
1/16W 1005 5% CJ 1.0 0.5 0.35 104
L
1/16W 1608 5% CJ t 1.6 0.8 0.45 108
1/10W 2125 5% CJ W 2 1.25 0.45 118
1/8W 3216 5% CJ 3.2 1.6 0.55 128
7
WIRING - 1 (MAIN / CD)
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
8
SCHEMATIC DIAGRAM - 1 (MAIN / CD 1 / 2 / H.P. / BATT1 / BATT2)
9
SCHEMATIC DIAGRAM - 2 (CD 2 / 2)
10
WIRING - 2 (FRONT / H.P. / BATT1 / BATT2)
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
11
SCHEMATIC DIAGRAM - 3 (FRONT)
12
WIRING - 3 (TUNER)
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
13
SCHEMATIC DIAGRAM - 4 (TUNER)
14
WIRING - 4 (TUNER)
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
15
SCHEMATIC DIAGRAM - 5 (TUNER)
16
WIRING - 5 (MOTOR)
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
A
B
C
D
H MOTOR C.B E
M2
F
+ M2 G
(SLED MOTOR)
H
_ SW1
FROM B CD C.B CNA402
I
(INSIDE LIMIT SW)
J
M1
(SPINDLE MOTOR) K
SW1
PIN3
L
M
_ +
N
O
M1
P
Q
R
S
T
U
17
IC BLOCK DIAGRAM
IC,M61509FP
IC,LC72121M
IC,M62495AFP
18
IC,BA4560N
IC,LA6541D
IC,TA2149N
19
LCD DISPLAY
LCD, HLC7365
20
IC DESCRIPTION
IC, LC867132V-5P07
Pin No. Pin Name I/O Description
1 O-RWC / CE O CD read/write control (TU CE).
2 O-DATA O Data output to LC72121M/M62495FP.
3 O-CLK O CLK output to LC72121M.
4 P16 - Not used.
5 O-CK SFT O Clock shift output of the microcomputer.
6 I-HOLD I Hold status detection.
7 I-RET I Microcomputer reset pin.
8 XT1 (IN) I
Connected to 32.768 kHz crystal oscillator.
9 XT2 (OUT) O
10 VSS1 - Connected to GND.
11 CF1 (IN) I Input pin for ceramic resonator oscillation.
.
12 CF2 (OUT) O Output pin for ceramic resonator oscillation.
13 VDD1 - Power supply (+5V).
14 I-FM ST I FM STEREO detect. (STEREO CONDITION "L").
15 I-KEY0 I KEY AD input.
16 I-CD SW I CD DOOR SW status detection input.
17 I-KEY1 I KEY AD input.
18 I-DECK I DECK MECHA MOTOR status input.
19 P85 - Not used.
20 P86 - Not used.
21 I-TU DO I Data input from LC72121M.
22 O-BASS LED O BASS LED ON/OFF control output.
23 O-QS LED O Q-Sound LED ON/OFF control output.
24 O-DUBB LED O High DUBB LED control.
25 O-INT O INT DIODE MATRIX detection output.
26 I-DRF I CD RF level detection input.
27 I-WRQ I CD sub-code Q standby input.
28 I-REM I Remote control input.
29 S0 O LCD segment output/MATRIX set (SW1).
30 S1 O LCD segment output/MATRIX set (LW).
31 S2 O LCD segment output/MATRIX set (AM 10K).
32 S3 O LCD segment output/MATRIX set (FM WIDE).
33 S4 O LCD segment output/MATRIX set (OIRT).
34 S5 O LCD segment output/MATRIX set (SW2).
35 S6 O LCD segment output/MATRIX set (SYNTH).
36 S7 O LCD segment output/MATRIX set (FM 1/16).
37 S8 O LCD segment output/MATRIX set (QSURR).
38 S9 O LCD segment output/MATRIX set.
39~40 S10~S11 O LCD segment output.
41 VDD3 - Power supply (+5V).
21
42 VSS3 - Connected to GND.
43~44 S12~S13 O LCD segment output.
45~50 S16~S21 O LCD segment output.
51~54 S22~S25 - Not used.
55 O-CD LED O LED ON/OFF control output for CD functions.
56 O-TU LED O LED ON/OFF control output for TU functions.
57 O-TA LED O LED ON/OFF control output for TAPE functions.
58 O-ROCK LED O LED ON/OFF control output for ROCK.
59 O-POP LED O LED ON/OFF control output for POP.
60 O-JAZZ LED O LED ON/OFF control output for JAZZ.
61 V3 - Not used.
62 I-CD TEST - Not used.
63 I-TU TEST - Not used.
64~66 COM0~COM2 O LCD common output.
67 COM3 - Not used.
68 VSS2 - Connected to GND.
69 VDD2 - Power supply (+5V).
70 O-CD ON O CD PWR control output.
71 O-TU ON O TU PWR control output.
72 O-P.CONT O Power supply control output.
73 O-HI DUBB O TAPE DUBB speed control.
74 O-MUTE O Main mute output.
75 O-FM MONO - Not used.
76 O-BEAT CONT O BEAT switch over output.
77 O-QSOUND - Not used.
78 O-COIN O CD command output.
79 I-SQOUT I CD sub-code Q input.
80 O-CQCK O CLK for CD commands/sub-codes.
22
IC, LC78622ED
Pin No. Pin Name I/O Description
1 DEFI I Defect detection signal (DEF) input.
2 TAI I Test input. A pull-down resistor is built in. Must be connected to 0V.
3 PDO O External VCO control phase comparator output.
4 VVSS Internal VCO ground. Must be connected to 0V.
5 ISET O PDO output current adjustment resistor connection.
6 VVDD Internal VCO power supply.
7 FR I VCO frequency range adjustment.
8 VSS Digital system ground. Must be connected to 0V.
9 EFMO O Slice level control; EFM signal output.
10 EFMIN I Slice level control; EFM signal input.
11 T2 I Test input. A pull-down resistor is built in. Must be connected to 0V.
12 CLV+ Disc motor control output.
O
13 CLV Three-value ouput is also possible when specified by microprocessor command.
Rough servo/phase control automatic switching monitor output. Outputs a high level
14 V/P O
during rough servo and a low level during phase control.
15 HFL I Track detection signal input. This is a Schmitt input.
16 TES I Tracking error signal input. This is a Schmitt input.
17 TOFF O Tracking off output.
18 TGL O Tracking gain switching output. Increase the gain when low.
19 JP+ Track jump output.
O
20 JP Three-value output is also possible when specified by microprocessor command.
EFM data playback clock monitor. Outputs 4.3218 MHz when the phase is locked.
21 PCK O
(Not used)
Synchronization signal detection ouput. Outputs a high level when the synchronization
22 FSEQ O signal detected from the EFM signal and the internally generated synchronization signal
agree. (Not used)
23 VDD Digital system power supply.
24 SL+
O Serial data command sled signal output terminal from microprocessor.
25 SL
26 CONT3 Not used.
27 PU IN I CD pickup inside limit switch.
28 RW O Serial data command sled output terminal from microprocessor.
De-emphasis monitor pin. A high level indicates playback of a de-emphasis disk.
29 EMPH O
(Not used)
30 C2F O C2 flag output. (Not used)
31 DOUT O Digital output (EIAJ format). (Not used)
32 T3
I Test input. A pull-down resistor is built in. Must be connected to 0V.
33 T4
34 NC Unused. Must be left open.
35 MUTEL O Left channel one-bit D/A converter mute output. (Not used)
36 LVDD Left channel one-bit D/A converter power supply.
37 LCHO O Left channel one-bit D/A converter output.
23
Pin No. Pin Name I/O Description
38 LVSS Left channel one-bit D/A converter ground. Must be connected to 0V.
39 RVSS - Right channel one-bit D/A converter ground. (Must be connected to 0V.)
40 RCHO O Right channel onr-bit D/A converter output.
41 RVDD - Right channel one-bit D/A converter power supply.
42 MUTER O Right channel one-bit D/A converter mute output. (Not used)
43 XVDD - Crystal oscillator power supply.
44 XOUT O
Connections for a 16.9344 MHz crystal oscillator element.
45 XIN I
46 XVSS - Crystal oscillator ground. (Must be connected to 0V.)
47 SBSY O Subcode clock synchronization signal output. (Not used)
48 EFLG O C1, C2, sigle an double error correction monitor. (Not used)
49 PW O Subcode P, Q, R, S, T, U and W output. (Not used)
Subcode frame synchronization signal output. This signal falls when the subcode are
50 SFSY O
in standby state. (Not used)
51 SBCK I Subcode readout clock input. This is a Schmitt input.
52 FSX O Output pin for the 7.35 kHZ synchronization signal divided from the crystal oscillator. (Not used)
53 WRQ O Subcode Q output standby output.
54 RWC I Read/write control input. This is a Schmitt input.
55 SQOUT O Subcode Q output.
56 COIN I Command input pin from control microprocessor.
Input for both the command input acquisition clock and the SQOUT pin subcode
57 CQCK I
readout clock input pin. This is Schmitt input.
58 RES I Reset input. This pin must be set low briefly after power is first applied.
59 T11 O Test output. Leave open. (Normally output a low level). (Not used)
60 16M O 16.9344 MHz output. (Not used)
61 4.2M O 4.2336 MHz output.
62 T5 I Test input. A pull-down resistor is built-in. (Must be connected to 0V.)
Chip seledt input. A pull-down resistor is built-in.
63 CS I
(Must be connected to 0V if not controlled.)
64 T1 I Test input. No pull-down resistor. (Must be connected to 0V.)
24
IC, LA9241ML
Pin No. Pin Name I/O Description
For the connection of the pickup photodiode. Addition to the FIN1 pin creates an RF
1 FIN2 O
signal and subtraction from it create an EF signal.
2 FIN1 O For the connection of the pickup photodiode.
For the connection of the pickup photodiode. Subtraction from the F pin creates a TE
3 E O
signal.
4 F O For the connection of the pickup photodiode.
5 TB I Inputs the DC components in the TE signal.
For the connection of a resistor which sets the gain of the TE signal between this pin
6 TE- O
and the TE pin.
7 TE O TE signal output.
8 TESI I TES (track error sense) comparator input. The signal is passed through a BPF.
9 SCI I Shock detection input.
10 TH I Sets the time constant for the tracking gain.
11 TA O TA amp output.
12 TD- I Composes the tracking phase compensation constant between the TD and VR pins.
13 TD I Sets the tracking phase compensation.
14 JP I Sets the amplitude of the tracking jump signal (kick pulses).
15 TO O Tracking control signal output.
16 FD O Focusing control signal output.
17 FD- I Composes the focusing phase compensation constant between the FD and FA pins.
18 FA O Composes the focusing phase compensation constant between the FD and FA pins.
19 FA- I Composes the focusing phase compensation constant between the FD and FA pins.
20 FE O FE signal output.
For the connection of a resistor whichs sets the gain of the FE signal between this pin
21 FE- I
and the TE pin.
22 AGND O Ground of analog signals.
23 SP O Single-ended output of the signals input to the CV+ and CV- pins.
24 SPI I Spindle amp input.
25 SPG I For the connection of a resistor which sets the gain in the spindle 12cm mode.
26 SP- I For the connection of the spindle phase compensation constant with the SPD pin.
27 SPD O Spindle control signal output.
28 SLEQ I For the connection of sled phase compensation constant.
29 SLD O Sled control signal output.
30 SL-
I Sled feed signal input from the microprocessor.
31 SL+
32 JP-
I Tracking signal input from the DSP.
33 JP+
34 TGL I Tracking gain control signal input from the DSP. Low gain when TGL is "H".
35 TOFF I Tracking off control signal input from the DSP. Off when TOFF is "H".
36 TES O Outputs the TES signal to the DSP.
25
Pin No. Pin Name I/O Description
The HFL (high frequency level) signal is used to judge whether the main beam is
37 HFL O
positioned on the pit or on the mirror.
38 SLOF I Sled servo off control input.
39 CV-
I CLV error signal input from the DSP.
40 CV+
41 RFSM O RF output.
Sets the RF gain and the EFM singal's 3T compensation constant togther with the
42 RFS- O
RFSM pin.
The SLC (slice level control) signal is output to control the DSP's data slice level of the
43 SLC O
RF waveform.
44 SL1 I Input to control the DSP's data slice level.
45 DGND - Ground of digital signals.
46 FSC O Output for the focus search smoothing capacitor.
47 TBC I The TBC (tracking balance control) signal sets the EF balance variation range.
48 NC -