Text preview for : GC30-2024-1_OS_TCAM_Programmers_Guide_and_Reference_Manual_Rel_20.1_Sep71.pdf part of IBM GC30-2024-1_OS_TCAM_Programmers_Guide_and_Reference_Manual_Rel_20.1_Sep71 IBM 360 os tcam GC30-2024-1_OS_TCAM_Programmers_Guide_and_Reference_Manual_Rel_20.1_Sep71.pdf
Back to : GC30-2024-1_OS_TCAM_Progr | Home
GC30-2024-1
OS TeAM
Programmer's Guide and
Systems Reference Manual
Program Number 3605 - CO - 548
Release Number 20.1
l,
Preface The first section of this book, How to Use This Book defines the audience for which this
programmer's guide and reference manual is intended, explains how the book is organized,
and suggests how the reader might best familiarize himself with its contents. The chart
below lists alphabetically the key words that are used throughout the book to refer to other
pUblications; accompanying the key words are the corresponding title and order number
to which the key words refer.
Key Words Used in
This Publication Title Order No.
Assembler IBM System/360 Operating System Assembler Language GC28-6514
Language
Checkpoint/Restart IBM System/360 Operating System Advanced Checkpoint/Restart GC28-6708
Planning Guide Planning Guide
Data Management IBM System/360 Operating System Data Management Services GC26-3746
Services
Job Control IBM System/360 Operating System JCL User's Guide GC28-6703
Language
Messages and Codes IBM System/360 Operating System Messages and Codes GC28-6631
Operator's Guide IBM System/360 Operating System Operator's Reference Manual GC28-6691
Principles of Operation IBM System/360 Operating System Principles of Operation GA22-682I
Programmer's Guide IBM System/360 Operating System Programmer's Guide to GC28-6670
to De bugging Debugging
Supervisor and Da ta IBM System/360 Operating System Supervisor and Data Management GC28-6647
Management Macro Macro Instructions
Instructions
Supervisor Services IBM System/360 Operating System Supervisor Services GC28-6646
System Generation IBM System/360 Operating System System Generation GC28-6554
TCAM Concepts and IBM System/360 Operating System Telecommunications Access GC30-2022
Facilities Method (TCAM) Concepts and Facilities
TCAM PLM IBM System/360 Operating System Telecommunications Access GY30-2029
Method (TCAM) Program Logic Manual
TOTE Configurator IBM Diagnostic Program TOTE/Configurator Users' Manual
User's Manual (Part No. 5172900)
TSO Command IBM System/360 Operating System Command Language Reference GC28-6732
Language
TSO Guide IBM System/360 Operating System TSO Guide GC28-6698
Utilities IBM System/360 Operating System Utilities GC28-6586
Second Edition (September 1971)
This is a major revision of, and obsoletes, GC30-2024-0, and Technical Newsletter GN30-2558. Changes
appearing in this edition are listed in the Summary of Amendments following the Preface.
Changes to the text and to illustrations are indicated by a vertical line to the left of the change.
Changes are made periodically to the information herein; before using this publication in conjunction with
I BM systems or equipment, refer to the latest SR L Newsletter for the editions that are applicable and
current.
Requests for copies of IBM publications should be directed to your IBM representative or to the IBM
branch office serving your locality.
This manual was prepared by the I BM Systems Development Division, Publications Center, Department
E01, P. O. Box 12275, Research Triangle Park, North Carolina 27709. A Reader's comment Form is
provided at the back of this publication; if it has been removed, send your comments to the above address.