Text preview for : HP 54520C_252C 22C_252C 40C_252C 42C Programmer.pdf part of Agilent HP 54520C_252C 22C_252C 40C_252C 42C Programmer Agilent HP 54520C_252C 22C_252C 40C_252C 42C Programmer.pdf
Back to : HP 54520C_252C 22C_252C 4 | Home
Programmer's Reference
Publication number 54542-97041
First edition, November 1995
This book applies directly to firmware revision 2.XX.
For Safety information, Warranties, and Regulatory
information, see the pages behind the index
Copyright Hewlett-Packard Company 1993-1995
All Rights Reserved
HP 54520C and 54540C Series
Oscilloscopes
Notice
Hewlett-Packard to Agilent Technologies Transition
This manual may contain references to HP or Hewlett-Packard. Please note that Hewlett-
Packard's former test and measurement, semiconductor products and chemical analysis
businesses are now part of Agilent Technologies. To reduce potential confusion, the only
change to product numbers and names has been in the company name prefix: where a
product name/number was HP XXXX the current name/number is now Agilent XXXX. For
example, model number HP8648 is now model number Agilent 8648.
Contacting Agilent Sales and Service Offices
The sales and service contact information in this manual may be out of date. The latest
service and contact information for your location can be found on the Web at:
http://www.agilent.com/find/assist
If you do not have access to the Internet, contact your field engineer or the nearest sales
and service office listed below. In any correspondence or telephone conversation, refer to
your instrument by its model number and full serial number.
United States Latin America New Zealand
(tel) 1 800 452 4844 (tel) (305) 269 7500 (tel) 0 800 738 378
(fax) 1 800 829 4433 (fax) (305) 269 7599 (fax) 64 4 495 8950
Canada Japan Asia Pacific
(tel) +1 877 894 4414 (tel) (81) 426 56 7832 (tel) (852) 3197 7777
(fax) +1 888 900 8921 (fax) (81) 426 56 7840 (fax) (852) 2506 9284
Europe Australia
(tel) (31 20) 547 2323 (tel) 1 800 629 485
(fax) (31 20) 547 2390 (fax) (61 3) 9210 5947
Printed in USA July 2004
ii
In This Book
Introduction to Programming
1 an Instrument
2 Programming an Instrument
Programming and
3 Documentation Conventions
This programmer's reference contains
general information, remote programming
information, programming examples, and 4 Example Programs
oscilloscope commands for programming
the HP54520C and HP 54540C Series
Oscilloscopes. 5 Common Commands
Instruments covered by the
Programmers Reference. 6 Root Level Commands
This Programmer's Reference contains
programming information for the
following models: 7 SYSTem Subsystem