Text preview for : 5951-6715E.pdf part of Agilent 5951-6715E Agilent 5951-6715E.pdf
Back to : 5951-6715E.pdf | Home
Agilent 8904A
Multifunction Synthesizer
Catalog
Agilent 8904A Waveform Catalog
Introduction
This catalog is a collection of waveforms created using the Agilent Technologies 8904A Multifunction
Synthesizer. This catalog should not be considered a comprehensive list of waveforms possible with the
8904A Multifunction Synthesizer, but only a small sampling. The catalog is intended to give the 8904A user
an indication of capabilities of the instrument and stimulate ideas for desired waveforms. In most cases,
the waveforms shown can be altered to match an application by changing waveform, their amplitudes or
phases, or by summing additional signals. All waveforms shown require Option 001.
For detailed instructions on the operation of the 8904A, see the Agilent 8904A Multifunction Synthesizer
Basic Operation and Application Guide.
Contents
No. Description No. Description
1 Shaped pulse train with 50% duty cycle 35 Haver triangles
2 Tilted square wave 36 Tone burst with sine wave envelope
3 Chopped sine wave 37 Single-sideband with carrier present 100% depth
4 Variable duty cycle pulses-- 38 Half of AM signal
duty cycles 0% to 50% 39 One-sided AM
5 Variable duty cycle pulses-- 40 Phase alternating single-cycle sine wave
duty cycles 50% to 100% 41 Four-level stair-step
6 Two-tone FSK with 50% duty cycle 42 Eight-level stair-step
7 ILS two-tone composite signal 43 Sixteen-level stair-step
8 Band-limited pulse simulation 44 Negative phase-continuous frequency sweep
9 Half-wave rectified sine wave 45 Alternating frequency tone bursts
10 SCR-triggered sine wave 46 Simultaneous bursts of two tones
11 IHF dynamic headroom burst 47 Amplitude sweeps
12 FM broadcast stereo composite signal 48 Four frequency tone bursts
13 VHF omnidirectional range (VOR) composite signal 49 Band-limited digital noise
14 Phase-continuous frequency sweep 50 Stair-step frequency sweep
15 Two-level sine wave burst with 50% duty cycle 51 Stair-step amplitude sweep
16 Gated sine wave burst with 50% duty cycle 52 Sine wave with added phase noise
17 Single cycle sine wave burst 53 Sine wave with amplitude noise
18 Full wave rectified sine wave 54 Sine wave with added noise
19 Distorted AM due to capcitive coupling of carrier past 55 Sine wave with FM noise
the AM modulator 56 Asymmetrical waveforms with constant
20 AM signal with over 100% negative peak frequency
modulation 57 Square waves between 50 kHz and 100 kHz rates
21 Distorted AM due to inability of the AM modulator to 58 Sine, square, ramp, and triangle waves with resolution
cut off the carrier better than 0.1 Hz
22 Trapezoid with variable percent of waveform flat 59 TACAN test signal
23 SMPTE 4 : 1 intermodulation test signal 60 Sine waves to 700 kHz
24 CCIF intermodulation distortion test signal (second 61 Alternating polarity sinc pulses
order difference frequency) 62 Variable duty cycle TTL true level noise pulses
25 Haversine with 50% duty cycle 63 PCM codec linearity test signal
26 Variable duty cycle pulses with high and low voltage 64 Digital oscilloscope trigger test signal
symmetrical about ground 65 Distortion analyzer test signal
27 Trapezoid with amplitude up to 10Vp-p 66 Sine burst with trapezoid envelope
28 Flattened sine wave 67 Ramp with flat top
29 High-pass filtered square wave 68 Ramp with markers
30 Gated full-wave rectified sine wave 69 Symmetrical ramp with flat top
31 Sampled waveform 70 Swept amplitude sine wave with dead time
32 Sine wave with crossover distortion 71 Sonobuoy composite signal
33 Transient intermodulation measurement 72 FFSK signal, 1200 baud rate, one-zero pattern
34 Negative ramp
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Agilent Technologies' Test and Measurement By internet, phone, or fax, get assistance with all your
Support, Services, and Assistance test and measurement needs.
Agilent Technologies aims to maximize the value you receive,
Online Assistance
while minimizing your risk and problems. We strive to ensure
that you get the test and measurement capabilities you paid www.agilent.com/find/assist
for and obtain the support you need. Our extensive support Phone or Fax
resources and services can help you choose the right Agilent United States:
products for your applications and apply them successfully. (tel) 1 800 452 4844
Every instrument and system we sell has a global warranty.
Support is available for at least five years beyond the produc- Canada:
tion life of the product. Two concepts underlie Agilent's (tel) 1 877 894 4414
overall support policy: "Our Promise" and "Your Advantage." (fax) (905) 206 4120
Our Promise Europe:
"Our Promise" means your Agilent test and measurement equip- (tel) (31 20) 547 2323
ment will meet its advertised performance and functionality. (fax) (31 20) 547 2390
When you are choosing new equipment, we will help you with Japan:
product information, including realistic performance specifica- (tel) (81) 426 56 7832
tions and practical recommendations from experienced test (fax) (81) 426 56 7840
engineers. When you use Agilent equipment, we can verify that
it works properly, help with product operation, and provide Latin America:
basic measurement assistance for the use of specified capabili- (tel) (305) 269 7500
ties, at no extra cost upon request. Many self-help tools are (fax) (305) 269 7599
available. Australia:
Your Advantage (tel) 1 800 629 485
"Your Advantage" means that Agilent offers a wide range of (fax) (61 3) 9210 5947
additional expert test and measurement services, which you New Zealand:
can purchase according to your unique technical and business (tel) 0 800 738 378
needs. Solve problems efficiently and gain a competitive edge (fax) (64 4) 495 8950
by contracting with us for calibration, extra-cost upgrades, out-
of-warranty repairs, and on-site education and training, as well Asia Pacific:
as design, system integration, project management, and other (tel) (852) 3197 7777
professional services. Experienced Agilent engineers and tech- (fax) (852) 2506 9284
nicians worldwide can help you maximize your productivity, Product specifications and descriptions in this
optimize the return on investment of your Agilent instruments document subject to change without notice.
and systems, and obtain dependable measurement accuracy Copyright