Text preview for : TP06AZ.pdf part of TOPPOWER TP06AZ The rated output power of TP06AZ series is 6W with wide input voltage range, for both AC input and DC input application. High reliability, precision, large power density, ultra-small size, no external heat sink required, stable output voltage and etc, with over current protection, , 3000V isolation voltage, short circuit, overload, internal thermal protection, Widely used in telecommunications, industrial control, instrument, data acquisition, signal control and other electronic systems.
Back to : TP06AZ.pdf | Home
TP06AZ Series
DESCRIPTION 6W 3KV Isolation Wide Input AC/DC Converters
The rated output power of TP06AZ series is 6W with wide input voltage range, for both AC input and DC
input application. High reliability, precision, large power density, ultra-small size, no external heat sink
required, stable output voltage and etc, with over current protection, , 3000V isolation voltage, short circuit,
overload, internal thermal protection, Widely used in telecommunications, industrial control, instrument,
data acquisition, signal control and other electronic systems.
FEATURES
Wide input voltage Both for AC and DC input voltage Operating temperature : -40 to 85
Short circuit protection Over Voltage protection Over current protection
RoHS compliant
SELECTION GUIDE
Input Voltage Output Ripple&Noise
Efficiency (Typ. )
Part Number
Voltage Current %
(VAC) (VDC) VDC) A (mV)
TP06AZ400S05W 85-500 100-700 5 1.2 76 100
TP06AZ400S09W 85-500 100-700 9 0.66 80 100
TP06AZ400S12W 85-500 100-700 12 0.5 81 100
TP06AZ400S15W 85-500 100-700 15 0.4 82 100
TP06AZ400S24W 85-500 100-700 24 0.25 83 100
*All specifications typical at TA=25°C humidity<75% , nominal input voltage 230VAC and rated output load unless otherwise specified.
INPUT CHARACTERISTICS
Parameter Conditions Min. Typ. Max. Units
Input voltage range VDC In module 100 700 VDC
Input voltage range VAC In module 85 500 VAC
Input Current 230VAC 23 mA
Inrush current NTC limited 30 A
Input frequency 47 ~ 440Hz
Leakage current <0.1mA at 265VAC/50HZ
External fuse recommended value 15/2W
OUTPUT CHARACTERISTICS
Parameter Conditions Min. Typ. Max. Units
Voltage accuracy Io=0.1...1.0 x Ionom Vi=Vi rated ±2 %
Line regulation ViminViVimax ±1 %
Load regulation Io=0.1...1.0 x Ionom Vimin ViVimax ±1 %
Start-up time Full load 100ms /230VAC ,200ms/115VAC
Output hold time Full load 40ms/230VAC, 15ms/115VAC
ENVIRONMENT CHARACTERISTICS
Parameter Conditions Min. Typ. Max. Units
Operating temperature [email protected]/ derating -40 +85
Storage temperature Industry-class -40 +85
Storage humidity 10 95 RH(%
Temperature coefficient (0~50) ±0.03 %/
www.gztoppower.com TEL:0086-20-82019000 Email:[email protected] page 1 of 3
TP06AZ Series
GENERAL CHARACTERISTICS
Parameter Conditions Min. Typ. Max. Units
Isolation voltage Input / Output 1 minute, leakage current 2mA 3000 VAC
Seismic 10~500Hz,2G10min./1cycle, 60min.each along X,Y,Z axes
Protection Over current,Over-Voltage, short circuit Auto recovery
Isolation Voltage I/P-O/P:3000VAC
Isolation resistance I/P-O/P>100M Ohms/500VDC 25 70% RH
Safety standard EN60950, EN60601 ,UL60950
Conduction and radiation EN55011, EN55022 (CISPR22) CLASS B
ESD IEC/EN 61000-4-2 level 4 8kV/15kV (see the application circuit)
RF IEC/EN 61000-4-3(see the application notes )
EFT IEC/EN 61000-4-4 level 4 4kV(see the application notes )
Surge IEC/EN 61000-4-5 level 4 2kV/4kV(see the application notes )
MTBF 200K hrs min. MIL-HDBK-217F(25)
Dimension 32*20.0*15mm (L*W*H)
TYPICAL APPLICATION CIRCUIT
R1 and R2 in the figure are the functions of balancing the voltages of C1 and C2, and the resistance is 750K/0.25W.
TYPICAL APPLICATION CIRCUIT
FUSE CX1,2 MOV DB C1,2
Component L1 NF C4 CY C5
(required) (required) (required) (required) (required)
PN
MOV is the
TP06AZ400S05W NF is common voltage 1000uF/16V
1.0mH 1A/100
TP06AZ400S09W mode inductance, resistance 222K 560uF/16V 104K/50V
15 , 104K/310V 0V 10uF/400
inductance value in and the /400 Ceramic
TP06AZ400S12W /2W 0.2A-0 AC Bridge V 470uF/16V
30mH, current recommend V capacitor
.5A pile
TP06AZ400S15W 0.2A-0.5A. ed value is 470uF/25V
TP06AZ400S24W 14D821K 220uF/35V
www.gztoppower.com TEL:0086-20-82019000 Email:[email protected] page 2 of 3
TP06AZ Series
MECHANICAL DIMENSIONS
Pin Function
1 -Vin
2 +Vin
3 +Vo
4 -Vo
* Pin not fitted on single output variants
Units:mm Tolerance:±0.5mm
SELECTION GUIDE
TP 06 A Z 400 S 05 W
W:4:1 Wide voltage input range
Main (auxiliary) output voltage
S:single output
Rated input voltage
Package type
AC-DC
Rated output power
Brand name
www.gztoppower.com TEL:0086-20-82019000 Email:[email protected] page 3 of 3