Text preview for : 2260B_Programming_Manual(March2014).pdf part of Keithley 2260B Programming Manual(March2014) Keithley 2260 2260B_Programming_Manual(March2014).pdf
Back to : 2260B_Programming_Manual( | Home
www.keithley.com
2260B Series
360W and 720W Multi-Range Programmable DC Power
Supplies
Programming Manual
Rev. A / March 2014
A Greater Measure of Confidence
A Tektronix Company
Series 2260B
360W and 720W Multi-Range Programmable DC Power
Supplies
PROGRAMMING MANUAL
ISO-9001 CERTIFIED MANUFACTURER
This manual contains proprietary information, which is protected by
copyright. All rights are reserved. No part of this manual may be
photocopied, reproduced or translated to another language without
prior written consent.
The information in this manual was correct at the time of printing.
However, we continue to improve our products and reserve the rights
to change specification, equipment, and maintenance procedures at
any time without notice.
Table of Contents
Table of Contents
SAFETY INSTRUCTIONS ................................................... 2
GETTING STARTED ........................................................... 6
2260B Series Overview ........................................... 7
Appearance ............................................................ 9
Configuration Settings ......................................... 15
REMOTE CONTROL ........................................................ 20
Interface Configuration ........................................ 21
Socket Server Examples ........................................ 32
Command Syntax ................................................. 36
Command List ...................................................... 39
Status Register Overview ...................................... 78
Error List .............................................................. 89
APPENDIX ...................................................................... 98
2260B Default Settings ......................................... 98
Error Messages & Messages .............................. 100
LED Display Format ........................................... 100
INDEX............................................................................ 101
1
2260B Series Programming Manual
SAFETY INSTRUCTIONS
This chapter contains important safety
instructions that you must follow during
operation and storage. Read the following before
any operation to insure your safety and to keep
the instrument in the best possible condition.
Safety Symbols
These safety symbols may appear in this manual or on the
instrument.
Warning: Identifies conditions or practices that
WARNING could result in injury or loss of life.
Caution: Identifies conditions or practices that
CAUTION could result in damage to the instrument or to
other properties.
DANGER High Voltage
Attention Refer to the Manual
Protective Conductor Terminal
Earth (ground) Terminal
2
SAFETY INSTRUCTIONS
Do not dispose electronic equipment as unsorted
municipal waste. Please use a separate collection
facility or contact the supplier from which this
instrument was purchased.
Safety Guidelines
General Guideline