Text preview for : 5991-0423EN Techniques for Precise Power Measurements in the Field - Application Note c20140722 [21] part of
| Home
Keysight Technologies
Techniques for Precise Power
Measurements in the Field
Using FieldFox Handheld Analyzers
Application Note
Abstract
This application note will discuss techniques for measuring average and peak power
and the associated equipment options available for field testing. As there is a range
of instrument types that can measure power, this application note will focus on the
two most widely employed RF/microwave instruments, namely, the power sensor
and the spectrum analyzer. Measurement examples will include signals such as CW,
pulsed and digitally modulated waveforms. It is important to understand the accuracy
and limitations of each instrument including factors that can affect the instruments'
performance in the field. Comparisons between different power sensors and spectrum
analyzers will be presented.
Introduction
The output power level of a system is the critical factor in the design and performance of almost all radio
frequency (RF) and microwave equipment [1]. The transmitted and received power levels determine the overall
performance of any communication or radar system. The measurement of signal power is so important that it is
measured at every stage of a system beginning with the initial design and prototyping of individual components,
during system manufacturing and qualification testing, during on-site system installation and lastly as part of
periodic maintenance and troubleshooting in the field.
Given that power measurements have important ramifications to the performance and compliance of a system, it
is important that power measurements can be duplicated at different times and at different places. This requires
high performance instruments (accuracy) delivering measurements that are stable under various environmental
and operating conditions (repeatability). It is also very important that all measured results, regardless of the
equipment, have a common agreement as to what is considered an absolute value for the power measurement
(traceability).
This application note will discuss techniques for measuring average and peak power and the associated
equipment options available for field testing.
Power Measuring Equipment Configurations
There are a variety of instruments capable Selection of the power measurement
of measuring RF and microwave power equipment involves a trade-off between
including power sensors and meters, accuracy, frequency range, dynamic
signal analyzers, spectrum analyzers, and range, portability, durability and warm-up
network analyzers [2]. This application time. This application note will review the
note will discuss field-capable instruments, benefits and tradeoffs when using a power
namely, the power sensor and the spec- sensor and the analyzer's CPM to measure
trum analyzer. There are several configura- the power of simple and complex signals
tions for connecting a power sensor to a in the field.
measurement and display system including
a traditional power meter, a laptop and a
spectrum analyzer. For example, Figure 1
shows different configurations when
using combinations of power sensors and
spectrum analyzers to accurately measure
average and peak power in the field. The
power sensor can be configured with
a separate power meter, as shown in
Figure 1a, or connected to a laptop using
a power sensor having a USB port, as
shown in Figure 1b. The meter and laptop
A) Power meter and sensors B) Power sensor and laptop
configurations can support a large number
of measurement channels, up to 4 sensors
when using a power meter and up to 20
sensors when using a laptop running the
appropriate power analysis software.
Another option, shown in Figure 1c,
connects a USB power sensor directly to
a spectrum analyzer. In this configuration,
the spectrum analyzer displays the power
measurement thus eliminating the need
to carry a power meter or laptop into the C) Power sensor and analyzer D) Spectrum analyzer
field. This spectrum analyzer configura-
tion is very convenient when spectrum Figure 1. Equipment configurations for measuring average and peak power
testing is also required as part of the
system installation, maintenance and/or
troubleshooting. One last option, shown in
Figure 1d, uses a spectrum analyzer with
a built-in channel power meter (CPM) to
directly measure the signal power without
the need for an external power sensor.
In this configuration, the analyzer's tuned
receiver measures the average power and
a short jumper cable is used to connect
the analyzer to the system's test point.
3
Power Sensors and Signal Processing
A typical configuration of a power sensor When using a power sensor and separate and aging of the sensor element. Keysight
and meter includes a sensor element power meter, the signal processing power sensors and meters include a preci-
(detector) followed by analog and digital functions are contained in the meter, as sion 50 MHz reference oscillator whose
signal processing components. Figure 2 shown in Figure 2 (red box). When using output power is controlled with great
shows a simplified block diagram of a a USB-based power sensor, the signal precision (