Text preview for : U4328-92000 U4328A M.2 (M-key) Interposer Quick Start Guide [2].pdf part of Agilent U4328-92000 U4328A M.2 (M-key) Interposer Quick Start Guide [2] Agilent U4328-92000 U4328A M.2 (M-key) Interposer Quick Start Guide [2].pdf
Back to : U4328-92000 U4328A M.2 (M | Home
U4328A M.2 (M-key) Interposer
Quick Start Guide
U4328A Contents
Part Description Qty
M2x 0.4x4L Flat Head Screw 4
M3x 0.5x2.5L Wafer Head Screw 4
M3 Hex Standoff Male/Female 1
4.5 Hex Driver 1
Screw Driver, Phillips #1 1
22x30
22x42 Mounting Base 1each
22x60
22x80
22x110
Interposer Cable Assembly Above-mentioned parts are replaceable. You can order these as
Replacement Parts Kit - U4328-68702.
Install Cable Connector edge into
1 Select the appropriate Mounting Base.
2 Connector on System Board. Ensure
that the installation angle is between
5-20 degrees.
Install Mounting Base with two M2 Flat
Head Screws.
3 Attach Mounting Base with Hex Standoff. 4 Install DUT to Interposer Connector.
Ensure that the installation angle is
between 5-20 degrees.
DUT
5 Attach DUT with M3 Wafer Head The Interposer Assembly is complete.
Screw. FRAGILE! EXERCISE CARE WHILE BENDING AND FLEXING
THE ASSEMBLY.
Detailed information on the U4328A Interposer is available at http://www.keysight.com/find/U4301A. On this webpage, click the Document Library link and
download the PCI Express Gen3 Hardware and Probing Guide.