Text preview for : 5991-2401EN U7249C and U7249D MIPI M-PHY_252C Conformance Test Software for Infiniium Oscilloscopes part of
| Home
Keysight Technologies
U7249C and U7249D MIPI M-PHY
Conformance Test Software for Infiniium Oscilloscopes
Data Sheet
Validate and debug the electrical performance of your embedded
MIPI M-PHYSM data links, including DigRF v4SM, UniProSM,
LLISM, UFS, CSI-3, SSIC and M-PCIe protocols quickly and easily
Introduction
The Keysight Technologies, Inc. MIPI M-PHY conformance test software for Infiniium oscilloscopes
gives you a fast, easy way to validate and debug your embedded M-PHY data links. The M-PHY
electrical test software allows you to automatically execute M-PHY electrical checklist tests for
DigRF v4, UniPro, LLI, UFS, CSI-3, SSIC and M-PCIe architectures, and displays the results in a
flexible report format. In addition to the measurement data, the report provides margin analysis
that shows how closely your product passed or failed each test.
The M-PHY conformance test software performs a wide range of tests required to meet the physical
layer requirements per Section 5.1 of the MIPI Alliance Specification for M-PHY v3.1 and M-PHY
Conformance Test Suite (CTS) v3.0.
The M-PHY conformance test software helps you execute the most difficult physical layer tests
for transmitters (TX tests only) that can be measured with a 6 GHz or higher-bandwidth realtime
oscilloscope. Although there are not currently any requirements for physical layer compliance
verification, it is highly recommended that every MIPI M-PHY link be tested against the limits of
the physical layer specification to ensure that it is compliant to the specification and to minimize
concerns with protocol level interoperability.
Features Easy Test Definition
The M-PHY conformance test software offers several The M-PHY conformance test software extends the ease-
features to simplify design validation: of-use advantages of Keysight's Infiniium oscilloscopes to